nxp: Rename CONFIG_U_BOOT_HDR_SIZE to FSL_U_BOOT_HDR_SIZE
This is always defined to 16K, so we move this over to
include/fsl_validate.h to start with. Next, we rename this from CONFIG_
to FSL_. Coalesce the various comments around this definition to be in
fsl_validate.h as well to explain the usage.
Signed-off-by: Tom Rini <trini@konsulko.com>
diff --git a/board/freescale/common/fsl_chain_of_trust.c b/board/freescale/common/fsl_chain_of_trust.c
index 9ca350e..029d06b 100644
--- a/board/freescale/common/fsl_chain_of_trust.c
+++ b/board/freescale/common/fsl_chain_of_trust.c
@@ -143,7 +143,7 @@
(image_entry_noargs_t)(unsigned long)spl_image->entry_point;
hdr_addr = (spl_image->entry_point + spl_image->size -
- CONFIG_U_BOOT_HDR_SIZE);
+ FSL_U_BOOT_HDR_SIZE);
spl_validate_uboot(hdr_addr, (uintptr_t)spl_image->entry_point);
/*
* In case of failure in validation, spl_validate_uboot would
diff --git a/drivers/mtd/nand/raw/fsl_ifc_spl.c b/drivers/mtd/nand/raw/fsl_ifc_spl.c
index 3b464ce..60a865b 100644
--- a/drivers/mtd/nand/raw/fsl_ifc_spl.c
+++ b/drivers/mtd/nand/raw/fsl_ifc_spl.c
@@ -278,11 +278,11 @@
* U-Boot header is appended at end of U-boot image, so
* calculate U-boot header address using U-boot header size.
*/
-#define CONFIG_U_BOOT_HDR_ADDR \
+#define FSL_U_BOOT_HDR_ADDR \
((CFG_SYS_NAND_U_BOOT_START + \
CFG_SYS_NAND_U_BOOT_SIZE) - \
- CONFIG_U_BOOT_HDR_SIZE)
- spl_validate_uboot(CONFIG_U_BOOT_HDR_ADDR,
+ FSL_U_BOOT_HDR_SIZE)
+ spl_validate_uboot(FSL_U_BOOT_HDR_ADDR,
CFG_SYS_NAND_U_BOOT_START);
/*
* In case of failure in validation, spl_validate_uboot would
diff --git a/include/configs/T104xRDB.h b/include/configs/T104xRDB.h
index 5bdc210..7a5bf93 100644
--- a/include/configs/T104xRDB.h
+++ b/include/configs/T104xRDB.h
@@ -20,13 +20,7 @@
#ifdef CONFIG_MTD_RAW_NAND
#ifdef CONFIG_NXP_ESBC
-#define CONFIG_U_BOOT_HDR_SIZE (16 << 10)
-/*
- * HDR would be appended at end of image and copied to DDR along
- * with U-Boot image.
- */
-#define CFG_SYS_NAND_U_BOOT_SIZE ((768 << 10) + \
- CONFIG_U_BOOT_HDR_SIZE)
+#define CFG_SYS_NAND_U_BOOT_SIZE ((768 << 10) + (16 << 10))
#else
#define CFG_SYS_NAND_U_BOOT_SIZE (768 << 10)
#endif
diff --git a/include/configs/ls1021atsn.h b/include/configs/ls1021atsn.h
index 5612c60..b15c4a2 100644
--- a/include/configs/ls1021atsn.h
+++ b/include/configs/ls1021atsn.h
@@ -38,21 +38,6 @@
#define SDRAM_CFG2_FRC_SR 0x80000000
#define SDRAM_CFG_BI 0x00000001
-#ifdef CONFIG_SD_BOOT
-#ifdef CONFIG_NXP_ESBC
-#define CONFIG_U_BOOT_HDR_SIZE (16 << 10)
-#endif /* ifdef CONFIG_NXP_ESBC */
-
-#ifdef CONFIG_U_BOOT_HDR_SIZE
-/*
- * HDR would be appended at end of image and copied to DDR along
- * with U-Boot image. Here u-boot max. size is 512K. So if binary
- * size increases then increase this size in case of secure boot as
- * it uses raw U-Boot image instead of FIT image.
- */
-#endif /* ifdef CONFIG_U_BOOT_HDR_SIZE */
-#endif
-
#define PHYS_SDRAM 0x80000000
#define PHYS_SDRAM_SIZE (1u * 1024 * 1024 * 1024)
diff --git a/include/configs/ls1021atwr.h b/include/configs/ls1021atwr.h
index 281b26f..9b22a2d 100644
--- a/include/configs/ls1021atwr.h
+++ b/include/configs/ls1021atwr.h
@@ -37,25 +37,6 @@
#define SDRAM_CFG2_FRC_SR 0x80000000
#define SDRAM_CFG_BI 0x00000001
-#ifdef CONFIG_SD_BOOT
-#ifdef CONFIG_NXP_ESBC
-/*
- * HDR would be appended at end of image and copied to DDR along
- * with U-Boot image.
- */
-#define CONFIG_U_BOOT_HDR_SIZE (16 << 10)
-#endif /* ifdef CONFIG_NXP_ESBC */
-
-#ifdef CONFIG_U_BOOT_HDR_SIZE
-/*
- * HDR would be appended at end of image and copied to DDR along
- * with U-Boot image. Here u-boot max. size is 512K. So if binary
- * size increases then increase this size in case of secure boot as
- * it uses raw u-boot image instead of fit image.
- */
-#endif /* ifdef CONFIG_U_BOOT_HDR_SIZE */
-#endif
-
#define PHYS_SDRAM 0x80000000
#define PHYS_SDRAM_SIZE (1u * 1024 * 1024 * 1024)
diff --git a/include/configs/ls1043a_common.h b/include/configs/ls1043a_common.h
index d0380b3..685e7e6 100644
--- a/include/configs/ls1043a_common.h
+++ b/include/configs/ls1043a_common.h
@@ -41,37 +41,10 @@
/* Serial Port */
#define CFG_SYS_NS16550_CLK (get_serial_clock())
-/* SD boot SPL */
-#ifdef CONFIG_SD_BOOT
-#ifdef CONFIG_NXP_ESBC
-#define CONFIG_U_BOOT_HDR_SIZE (16 << 10)
-/*
- * HDR would be appended at end of image and copied to DDR along
- * with U-Boot image. Here u-boot max. size is 512K. So if binary
- * size increases then increase this size in case of secure boot as
- * it uses raw u-boot image instead of fit image.
- */
-#endif /* ifdef CONFIG_NXP_ESBC */
-#endif
-
/* NAND SPL */
#ifdef CONFIG_NAND_BOOT
#define CFG_SYS_NAND_U_BOOT_DST CONFIG_TEXT_BASE
#define CFG_SYS_NAND_U_BOOT_START CONFIG_TEXT_BASE
-
-#ifdef CONFIG_NXP_ESBC
-#define CONFIG_U_BOOT_HDR_SIZE (16 << 10)
-#endif /* ifdef CONFIG_NXP_ESBC */
-
-#ifdef CONFIG_U_BOOT_HDR_SIZE
-/*
- * HDR would be appended at end of image and copied to DDR along
- * with U-Boot image. Here u-boot max. size is 512K. So if binary
- * size increases then increase this size in case of secure boot as
- * it uses raw u-boot image instead of fit image.
- */
-#endif /* ifdef CONFIG_U_BOOT_HDR_SIZE */
-
#endif
/* GPIO */
diff --git a/include/configs/ls1046a_common.h b/include/configs/ls1046a_common.h
index 250891e..ae9dc0c 100644
--- a/include/configs/ls1046a_common.h
+++ b/include/configs/ls1046a_common.h
@@ -41,19 +41,6 @@
/* Serial Port */
#define CFG_SYS_NS16550_CLK (get_serial_clock())
-/* SD boot SPL */
-#ifdef CONFIG_SD_BOOT
-#ifdef CONFIG_NXP_ESBC
-#define CONFIG_U_BOOT_HDR_SIZE (16 << 10)
-/*
- * HDR would be appended at end of image and copied to DDR along
- * with U-Boot image. Here u-boot max. size is 512K. So if binary
- * size increases then increase this size in case of secure boot as
- * it uses raw u-boot image instead of fit image.
- */
-#endif /* ifdef CONFIG_NXP_ESBC */
-#endif
-
/* NAND SPL */
#ifdef CONFIG_NAND_BOOT
#define CFG_SYS_NAND_U_BOOT_DST CONFIG_TEXT_BASE
diff --git a/include/configs/ls1088a_common.h b/include/configs/ls1088a_common.h
index bcba8d8..86c5d48 100644
--- a/include/configs/ls1088a_common.h
+++ b/include/configs/ls1088a_common.h
@@ -133,17 +133,4 @@
" 0x580e00000 \0"
#endif
-#ifdef CONFIG_SPL
-#ifdef CONFIG_NXP_ESBC
-#define CONFIG_U_BOOT_HDR_SIZE (16 << 10)
-/*
- * HDR would be appended at end of image and copied to DDR along
- * with U-Boot image. Here u-boot max. size is 512K. So if binary
- * size increases then increase this size in case of secure boot as
- * it uses raw u-boot image instead of fit image.
- */
-#endif /* ifdef CONFIG_NXP_ESBC */
-
-#endif
-
#endif /* __LS1088_COMMON_H */
diff --git a/include/fsl_validate.h b/include/fsl_validate.h
index 252d499..fbcbd424 100644
--- a/include/fsl_validate.h
+++ b/include/fsl_validate.h
@@ -280,4 +280,11 @@
* Architecture header (appended to U-boot image).
*/
void spl_validate_uboot(uint32_t hdr_addr, uintptr_t img_addr);
+
+/*
+ * This header is appended at end of image and copied to DDR along
+ * with the U-Boot image and later used as part of the validation
+ * flow
+ */
+#define FSL_U_BOOT_HDR_SIZE (16 << 10)
#endif