commit caecfe655176a044724bb5e20dc9c7b846c34b14
author Ashok Reddy Soma <ashok.reddy.soma@xilinx.com> Mon May 18 01:11:00 2020 -0600
committer Michal Simek <michal.simek@xilinx.com> Wed Jun 24 13:11:08 2020 +0200
tree 0cdc5ebeaab7c0fbc772a168a66f9f14c15315fc
parent 43d9972b2bed73657085400d6e9a3e3fde27e6fa

spi: zynq_[q]spi: Convert config's to macro's

Remove below config options and convert them to macros. They have never
been configured to different values than default one. And also it makes
sense to reduce the config_whitelist.
CONFIG_SYS_ZYNQ_SPI_WAIT
CONFIG_SYS_ZYNQ_QSPI_WAIT
CONFIG_XILINX_SPI_IDLE_VAL

Signed-off-by: Ashok Reddy Soma <ashok.reddy.soma@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

drivers/spi/xilinx_spi.c

diff --git a/drivers/spi/xilinx_spi.c b/drivers/spi/xilinx_spi.c
index 05768ee..348630f 100644
--- a/drivers/spi/xilinx_spi.c
+++ b/drivers/spi/xilinx_spi.c
@@ -76,9 +76,7 @@
 				SPICR_SPE)
 #define XILSPI_SPICR_DFLT_OFF	(SPICR_MASTER_INHIBIT | SPICR_MANUAL_SS)
 
-#ifndef CONFIG_XILINX_SPI_IDLE_VAL
-#define CONFIG_XILINX_SPI_IDLE_VAL	GENMASK(7, 0)
-#endif
+#define XILINX_SPI_IDLE_VAL	GENMASK(7, 0)
 
 #define XILINX_SPISR_TIMEOUT	10000 /* in milliseconds */
 
@@ -176,7 +174,7 @@
 
 	while (txbytes && !(readl(&regs->spisr) & SPISR_TX_FULL) &&
 	       i < priv->fifo_depth) {
-		d = txp ? *txp++ : CONFIG_XILINX_SPI_IDLE_VAL;
+		d = txp ? *txp++ : XILINX_SPI_IDLE_VAL;
 		debug("spi_xfer: tx:%x ", d);
 		/* write out and wait for processing (receive data) */
 		writel(d & SPIDTR_8BIT_MASK, &regs->spidtr);

drivers/spi/zynq_qspi.c

diff --git a/drivers/spi/zynq_qspi.c b/drivers/spi/zynq_qspi.c
index db473da..3f39ef0 100644
--- a/drivers/spi/zynq_qspi.c
+++ b/drivers/spi/zynq_qspi.c
@@ -47,9 +47,7 @@
 #define ZYNQ_QSPI_CR_SS_SHIFT		10	/* Slave select shift */
 
 #define ZYNQ_QSPI_FIFO_DEPTH		63
-#ifndef CONFIG_SYS_ZYNQ_QSPI_WAIT
-#define CONFIG_SYS_ZYNQ_QSPI_WAIT	CONFIG_SYS_HZ/100	/* 10 ms */
-#endif
+#define ZYNQ_QSPI_WAIT			(CONFIG_SYS_HZ / 100)	/* 10 ms */
 
 /* zynq qspi register set */
 struct zynq_qspi_regs {
@@ -350,7 +348,7 @@
 	do {
 		status = readl(&regs->isr);
 	} while ((status == 0) &&
-		(get_timer(timeout) < CONFIG_SYS_ZYNQ_QSPI_WAIT));
+		(get_timer(timeout) < ZYNQ_QSPI_WAIT));
 
 	if (status == 0) {
 		printf("zynq_qspi_irq_poll: Timeout!\n");

drivers/spi/zynq_spi.c

diff --git a/drivers/spi/zynq_spi.c b/drivers/spi/zynq_spi.c
index 3e66b34..78ffd3e 100644
--- a/drivers/spi/zynq_spi.c
+++ b/drivers/spi/zynq_spi.c
@@ -36,9 +36,7 @@
 #define ZYNQ_SPI_CR_SS_SHIFT		10	/* Slave select shift */
 
 #define ZYNQ_SPI_FIFO_DEPTH		128
-#ifndef CONFIG_SYS_ZYNQ_SPI_WAIT
-#define CONFIG_SYS_ZYNQ_SPI_WAIT	(CONFIG_SYS_HZ/100)	/* 10 ms */
-#endif
+#define ZYNQ_SPI_WAIT			(CONFIG_SYS_HZ / 100)	/* 10 ms */
 
 /* zynq spi register set */
 struct zynq_spi_regs {
@@ -251,7 +249,7 @@
 		ts = get_timer(0);
 		status = readl(&regs->isr);
 		while (!(status & ZYNQ_SPI_IXR_TXOW_MASK)) {
-			if (get_timer(ts) > CONFIG_SYS_ZYNQ_SPI_WAIT) {
+			if (get_timer(ts) > ZYNQ_SPI_WAIT) {
 				printf("spi_xfer: Timeout! TX FIFO not full\n");
 				return -1;
 			}