arm: mach-k3: introduce generic board detction kconfig option
For non TI boards it is not possible to enable the do_board_detect()
call as TI_I2C_BOARD_DETECT is defined in board/ti/common/Kconfig.
I want to use do_board_detect() to dectect boards and properties based
on some SPI communication with a FPGA.
Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
diff --git a/arch/arm/mach-k3/Kconfig b/arch/arm/mach-k3/Kconfig
index a8c3a59..7edbac2 100644
--- a/arch/arm/mach-k3/Kconfig
+++ b/arch/arm/mach-k3/Kconfig
@@ -187,6 +187,11 @@
help
SWRV for X509 certificate used for boot images
+config K3_BOARD_DETECT
+ bool "Support for Board detection"
+ help
+ Support for board detection.
+
source "board/ti/am65x/Kconfig"
source "board/ti/am64x/Kconfig"
source "board/ti/am62x/Kconfig"
diff --git a/arch/arm/mach-k3/am642_init.c b/arch/arm/mach-k3/am642_init.c
index 96f292e..1bf7e16 100644
--- a/arch/arm/mach-k3/am642_init.c
+++ b/arch/arm/mach-k3/am642_init.c
@@ -100,7 +100,7 @@
{
int ret, rescan;
- if (IS_ENABLED(CONFIG_TI_I2C_BOARD_DETECT))
+ if (IS_ENABLED(CONFIG_K3_BOARD_DETECT))
do_board_detect();
/*
diff --git a/arch/arm/mach-k3/am654_init.c b/arch/arm/mach-k3/am654_init.c
index 768fdd6..70059ed 100644
--- a/arch/arm/mach-k3/am654_init.c
+++ b/arch/arm/mach-k3/am654_init.c
@@ -245,8 +245,7 @@
/* Output System Firmware version info */
k3_sysfw_print_ver();
- /* Perform EEPROM-based board detection */
- if (IS_ENABLED(CONFIG_TI_I2C_BOARD_DETECT))
+ if (IS_ENABLED(CONFIG_K3_BOARD_DETECT))
do_board_detect();
#if defined(CONFIG_CPU_V7R) && defined(CONFIG_K3_AVS0)
diff --git a/arch/arm/mach-k3/j721e_init.c b/arch/arm/mach-k3/j721e_init.c
index 276cbb5..9cae3ac 100644
--- a/arch/arm/mach-k3/j721e_init.c
+++ b/arch/arm/mach-k3/j721e_init.c
@@ -140,7 +140,7 @@
int ret, rescan, mmc_dev = -1;
static struct mmc *mmc;
- if (IS_ENABLED(CONFIG_TI_I2C_BOARD_DETECT))
+ if (IS_ENABLED(CONFIG_K3_BOARD_DETECT))
do_board_detect();
/*
@@ -267,8 +267,7 @@
/* Output System Firmware version info */
k3_sysfw_print_ver();
- /* Perform EEPROM-based board detection */
- if (IS_ENABLED(CONFIG_TI_I2C_BOARD_DETECT))
+ if (IS_ENABLED(CONFIG_K3_BOARD_DETECT))
do_board_detect();
#if defined(CONFIG_CPU_V7R) && defined(CONFIG_K3_AVS0)