imx8mm: synchronise device tree with linux
Synchronise device tree with linux v5.19-rc5.
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
diff --git a/arch/arm/dts/imx8mm-venice-gw7901.dts b/arch/arm/dts/imx8mm-venice-gw7901.dts
index d5cdbb7..24737e8 100644
--- a/arch/arm/dts/imx8mm-venice-gw7901.dts
+++ b/arch/arm/dts/imx8mm-venice-gw7901.dts
@@ -8,6 +8,7 @@
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/linux-event-codes.h>
#include <dt-bindings/leds/common.h>
+#include <dt-bindings/phy/phy-imx8-pcie.h>
#include "imx8mm.dtsi"
@@ -179,6 +180,12 @@
};
};
+ pcie0_refclk: pcie0-refclk {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <100000000>;
+ };
+
reg_3p3v: regulator-3p3v {
compatible = "regulator-fixed";
regulator-name = "3P3V";
@@ -255,6 +262,10 @@
};
};
+&disp_blk_ctrl {
+ status = "disabled";
+};
+
&ecspi1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_spi1>;
@@ -282,6 +293,37 @@
};
};
+&gpio1 {
+ gpio-line-names = "uart1_rs422#", "", "", "uart1_rs485#",
+ "", "uart1_rs232#", "dig1_in", "dig1_out",
+ "", "", "", "", "", "", "", "",
+ "", "", "", "", "", "", "", "",
+ "", "", "", "", "", "", "", "";
+};
+
+&gpio4 {
+ gpio-line-names = "", "", "", "",
+ "", "", "uart3_rs232#", "uart3_rs422#",
+ "uart3_rs485#", "", "", "", "", "", "", "",
+ "", "", "", "", "", "", "", "",
+ "", "", "", "uart4_rs485#", "", "sim1det#", "sim2det#", "";
+};
+
+&gpio5 {
+ gpio-line-names = "", "", "", "dig2_out", "dig2_in", "sim2sel", "", "",
+ "", "", "uart4_rs232#", "", "", "uart4_rs422#", "", "",
+ "", "", "", "", "", "", "", "",
+ "", "", "", "", "", "", "", "";
+};
+
+&gpu_2d {
+ status = "disabled";
+};
+
+&gpu_3d {
+ status = "disabled";
+};
+
&i2c1 {
clock-frequency = <100000>;
pinctrl-names = "default";
@@ -296,8 +338,6 @@
interrupts = <16 IRQ_TYPE_EDGE_FALLING>;
interrupt-controller;
#interrupt-cells = <1>;
- #address-cells = <1>;
- #size-cells = <0>;
adc {
compatible = "gw,gsc-adc";
@@ -577,6 +617,7 @@
pinctrl-0 = <&pinctrl_ksz>;
interrupt-parent = <&gpio4>;
interrupts = <18 IRQ_TYPE_EDGE_FALLING>;
+ phy-mode = "rgmii-id";
ports {
#address-cells = <1>;
@@ -586,32 +627,24 @@
reg = <0>;
label = "lan1";
local-mac-address = [00 00 00 00 00 00];
- phy-handle = <&sw_phy0>;
- phy-mode = "internal";
};
lan2: port@1 {
reg = <1>;
label = "lan2";
local-mac-address = [00 00 00 00 00 00];
- phy-handle = <&sw_phy1>;
- phy-mode = "internal";
};
lan3: port@2 {
reg = <2>;
label = "lan3";
local-mac-address = [00 00 00 00 00 00];
- phy-handle = <&sw_phy2>;
- phy-mode = "internal";
};
lan4: port@3 {
reg = <3>;
label = "lan4";
local-mac-address = [00 00 00 00 00 00];
- phy-handle = <&sw_phy3>;
- phy-mode = "internal";
};
port@5 {
@@ -626,34 +659,6 @@
};
};
};
-
- mdios {
- #address-cells = <1>;
- #size-cells = <0>;
-
- mdio@0 {
- reg = <0>;
- compatible = "microchip,ksz-mdio";
- #address-cells = <1>;
- #size-cells = <0>;
-
- sw_phy0: ethernet-phy@0 {
- reg = <0x0>;
- };
-
- sw_phy1: ethernet-phy@1 {
- reg = <0x1>;
- };
-
- sw_phy2: ethernet-phy@2 {
- reg = <0x2>;
- };
-
- sw_phy3: ethernet-phy@3 {
- reg = <0x3>;
- };
- };
- };
};
crypto@60 {
@@ -669,6 +674,41 @@
status = "okay";
};
+&pcie_phy {
+ fsl,refclk-pad-mode = <IMX8_PCIE_REFCLK_PAD_INPUT>;
+ fsl,clkreq-unsupported;
+ clocks = <&pcie0_refclk>;
+ clock-names = "ref";
+ status = "okay";
+};
+
+&pcie0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pcie0>;
+ reset-gpio = <&gpio5 2 GPIO_ACTIVE_LOW>;
+ clocks = <&clk IMX8MM_CLK_PCIE1_ROOT>, <&clk IMX8MM_CLK_PCIE1_AUX>,
+ <&pcie0_refclk>;
+ clock-names = "pcie", "pcie_aux", "pcie_bus";
+ assigned-clocks = <&clk IMX8MM_CLK_PCIE1_AUX>,
+ <&clk IMX8MM_CLK_PCIE1_CTRL>;
+ assigned-clock-rates = <10000000>, <250000000>;
+ assigned-clock-parents = <&clk IMX8MM_SYS_PLL2_50M>,
+ <&clk IMX8MM_SYS_PLL2_250M>;
+ status = "okay";
+};
+
+&pgc_gpu {
+ status = "disabled";
+};
+
+&pgc_gpumix {
+ status = "disabled";
+};
+
+&pgc_mipi {
+ status = "disabled";
+};
+
&uart1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart1>, <&pinctrl_uart1_gpio>;
@@ -677,6 +717,7 @@
dtr-gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
dsr-gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
dcd-gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
+ uart-has-rtscts;
status = "okay";
};
@@ -692,6 +733,7 @@
pinctrl-0 = <&pinctrl_uart3>, <&pinctrl_uart3_gpio>;
cts-gpios = <&gpio4 10 GPIO_ACTIVE_LOW>;
rts-gpios = <&gpio4 9 GPIO_ACTIVE_LOW>;
+ uart-has-rtscts;
status = "okay";
};
@@ -700,6 +742,7 @@
pinctrl-0 = <&pinctrl_uart4>, <&pinctrl_uart4_gpio>;
cts-gpios = <&gpio5 11 GPIO_ACTIVE_LOW>;
rts-gpios = <&gpio5 12 GPIO_ACTIVE_LOW>;
+ uart-has-rtscts;
status = "okay";
};
@@ -833,6 +876,13 @@
>;
};
+ pinctrl_pcie0: pciegrp {
+ fsl,pins = <
+ MX8MM_IOMUXC_SAI3_TXFS_GPIO4_IO31 0x40000041 /* WDIS# */
+ MX8MM_IOMUXC_SAI3_MCLK_GPIO5_IO2 0x41
+ >;
+ };
+
pinctrl_pmic: pmicgrp {
fsl,pins = <
MX8MM_IOMUXC_SAI5_RXC_GPIO3_IO20 0x41