board: ethernut5: Update to support DT and DM
Add the dts files to support deivce tree, update the configuration
files to support the device tree and driver model. The peripheral
clock and pins configuration are handled by the clock and the pinctrl
drivers respectively.
Signed-off-by: Wenyou Yang <wenyou.yang@microchip.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
diff --git a/arch/arm/dts/ethernut5.dts b/arch/arm/dts/ethernut5.dts
new file mode 100644
index 0000000..e077152
--- /dev/null
+++ b/arch/arm/dts/ethernut5.dts
@@ -0,0 +1,94 @@
+/*
+ * ethernut5.dts - Device Tree file for Ethernut 5 board
+ *
+ * Copyright (C) 2012 egnite GmbH <info@egnite.de>
+ *
+ * Licensed under GPLv2.
+ */
+/dts-v1/;
+#include "at91sam9xe.dtsi"
+
+/ {
+ model = "Ethernut 5";
+ compatible = "egnite,ethernut5", "atmel,at91sam9260", "atmel,at91sam9";
+
+ chosen {
+ bootargs = "console=ttyS0,115200 root=/dev/mtdblock0 rw rootfstype=jffs2";
+ };
+
+ memory {
+ reg = <0x20000000 0x08000000>;
+ };
+
+ clocks {
+ slow_xtal {
+ clock-frequency = <32768>;
+ };
+
+ main_xtal {
+ clock-frequency = <18432000>;
+ };
+ };
+
+ ahb {
+ apb {
+ dbgu: serial@fffff200 {
+ status = "okay";
+ };
+
+ usart0: serial@fffb0000 {
+ status = "okay";
+ };
+
+ usart1: serial@fffb4000 {
+ status = "okay";
+ };
+
+ macb0: ethernet@fffc4000 {
+ phy-mode = "rmii";
+ status = "okay";
+ };
+
+ usb1: gadget@fffa4000 {
+ atmel,vbus-gpio = <&pioC 5 GPIO_ACTIVE_HIGH>;
+ status = "okay";
+ };
+ };
+
+ nand0: nand@40000000 {
+ nand-bus-width = <8>;
+ nand-ecc-mode = "soft";
+ nand-on-flash-bbt;
+ status = "okay";
+
+ gpios = <0
+ &pioC 14 GPIO_ACTIVE_HIGH
+ 0
+ >;
+
+ root@0 {
+ label = "root";
+ reg = <0x0 0x08000000>;
+ };
+
+ data@20000 {
+ label = "data";
+ reg = <0x08000000 0x38000000>;
+ };
+ };
+
+ usb0: ohci@00500000 {
+ num-ports = <2>;
+ status = "okay";
+ };
+ };
+
+ i2c-gpio-0 {
+ status = "okay";
+
+ pcf8563@50 {
+ compatible = "nxp,pcf8563";
+ reg = <0x51>;
+ };
+ };
+};