bootcount: Migrate CONFIG_SYS_BOOTCOUNT_ADDR
Migrate the users of CONFIG_SYS_BOOTCOUNT_ADDR to Kconfig. We can
provide a default for BOOTCOUNT_AM33XX as that's a specific part of the
RTC in use. We can also provide a default for ARCH_LS1043A and
ARCH_LS1021A as they had been previously calculated and their symbols
are in Kconfig. In the case of other QE-enabled platforms, they are not
so we must update the relevant defconfig files. The previous default
only applied in some cases, even on a specific SoC family.
Reviewed-by: Lukasz Majewski <lukma@denx.de>
Reviewed-by: Alex Kiernan <alex.kiernan@gmail.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
diff --git a/configs/calimain_defconfig b/configs/calimain_defconfig
index cbb31f6..234b1a5 100644
--- a/configs/calimain_defconfig
+++ b/configs/calimain_defconfig
@@ -23,6 +23,7 @@
CONFIG_ENV_IS_IN_FLASH=y
CONFIG_BOOTP_DNS=y
CONFIG_BOOTCOUNT_LIMIT=y
+CONFIG_SYS_BOOTCOUNT_ADDR=0x01C23000
# CONFIG_MMC is not set
CONFIG_MTD_NOR_FLASH=y
CONFIG_SYS_NS16550=y
diff --git a/configs/dh_imx6_defconfig b/configs/dh_imx6_defconfig
index 251fcd0..2b4fe9c 100644
--- a/configs/dh_imx6_defconfig
+++ b/configs/dh_imx6_defconfig
@@ -35,6 +35,7 @@
CONFIG_ENV_IS_IN_SPI_FLASH=y
CONFIG_DWC_AHSATA=y
CONFIG_BOOTCOUNT_LIMIT=y
+CONFIG_SYS_BOOTCOUNT_ADDR=0x00900000
CONFIG_SPI_FLASH=y
CONFIG_SPI_FLASH_SPANSION=y
CONFIG_PHYLIB=y
diff --git a/configs/ge_b450v3_defconfig b/configs/ge_b450v3_defconfig
index ee1cc43..045380b 100644
--- a/configs/ge_b450v3_defconfig
+++ b/configs/ge_b450v3_defconfig
@@ -29,6 +29,7 @@
CONFIG_BOOTCOUNT_LIMIT=y
CONFIG_BOOTCOUNT_EXT=y
CONFIG_SYS_BOOTCOUNT_EXT_DEVPART="1:5"
+CONFIG_SYS_BOOTCOUNT_ADDR=0x7000A000
CONFIG_SPI_FLASH=y
CONFIG_SPI_FLASH_STMICRO=y
CONFIG_NETDEVICES=y
diff --git a/configs/ge_b650v3_defconfig b/configs/ge_b650v3_defconfig
index 27a89b0..9d4b8ae 100644
--- a/configs/ge_b650v3_defconfig
+++ b/configs/ge_b650v3_defconfig
@@ -29,6 +29,7 @@
CONFIG_BOOTCOUNT_LIMIT=y
CONFIG_BOOTCOUNT_EXT=y
CONFIG_SYS_BOOTCOUNT_EXT_DEVPART="1:5"
+CONFIG_SYS_BOOTCOUNT_ADDR=0x7000A000
CONFIG_SPI_FLASH=y
CONFIG_SPI_FLASH_STMICRO=y
CONFIG_NETDEVICES=y
diff --git a/configs/ge_b850v3_defconfig b/configs/ge_b850v3_defconfig
index af4ba97..9478568 100644
--- a/configs/ge_b850v3_defconfig
+++ b/configs/ge_b850v3_defconfig
@@ -29,6 +29,7 @@
CONFIG_BOOTCOUNT_LIMIT=y
CONFIG_BOOTCOUNT_EXT=y
CONFIG_SYS_BOOTCOUNT_EXT_DEVPART="1:5"
+CONFIG_SYS_BOOTCOUNT_ADDR=0x7000A000
CONFIG_SPI_FLASH=y
CONFIG_SPI_FLASH_STMICRO=y
CONFIG_NETDEVICES=y
diff --git a/configs/highbank_defconfig b/configs/highbank_defconfig
index 7b9c0e7..55f83ed 100644
--- a/configs/highbank_defconfig
+++ b/configs/highbank_defconfig
@@ -17,6 +17,7 @@
CONFIG_SCSI_AHCI=y
CONFIG_BOOTCOUNT_LIMIT=y
CONFIG_SYS_BOOTCOUNT_SINGLEWORD=y
+CONFIG_SYS_BOOTCOUNT_ADDR=0xfff3cf0c
# CONFIG_MMC is not set
CONFIG_SCSI=y
CONFIG_OF_LIBFDT=y
diff --git a/configs/ids8313_defconfig b/configs/ids8313_defconfig
index 5ca7703..44b411c 100644
--- a/configs/ids8313_defconfig
+++ b/configs/ids8313_defconfig
@@ -36,6 +36,7 @@
CONFIG_BOOTP_SUBNETMASK=y
CONFIG_BOOTCOUNT_LIMIT=y
CONFIG_BOOTCOUNT_I2C=y
+CONFIG_SYS_BOOTCOUNT_ADDR=0x9
# CONFIG_MMC is not set
CONFIG_MTD_NOR_FLASH=y
CONFIG_PHYLIB=y
diff --git a/configs/kmcoge4_defconfig b/configs/kmcoge4_defconfig
index fe731dc..9d22c21 100644
--- a/configs/kmcoge4_defconfig
+++ b/configs/kmcoge4_defconfig
@@ -35,6 +35,7 @@
CONFIG_BOOTP_GATEWAY=y
CONFIG_BOOTP_HOSTNAME=y
CONFIG_BOOTCOUNT_LIMIT=y
+CONFIG_SYS_BOOTCOUNT_ADDR=0xFB000020
# CONFIG_MMC is not set
CONFIG_SPI_FLASH=y
CONFIG_SPI_FLASH_SPANSION=y
diff --git a/configs/kmcoge5ne_defconfig b/configs/kmcoge5ne_defconfig
index c360d06..3426adf 100644
--- a/configs/kmcoge5ne_defconfig
+++ b/configs/kmcoge5ne_defconfig
@@ -28,6 +28,7 @@
CONFIG_BOOTP_GATEWAY=y
CONFIG_BOOTP_HOSTNAME=y
CONFIG_BOOTCOUNT_LIMIT=y
+CONFIG_SYS_BOOTCOUNT_ADDR=0xE011BFF8
# CONFIG_MMC is not set
CONFIG_MTD_NOR_FLASH=y
# CONFIG_PCI is not set
diff --git a/configs/kmeter1_defconfig b/configs/kmeter1_defconfig
index 3e9ba80..e795ac4 100644
--- a/configs/kmeter1_defconfig
+++ b/configs/kmeter1_defconfig
@@ -27,6 +27,7 @@
CONFIG_BOOTP_GATEWAY=y
CONFIG_BOOTP_HOSTNAME=y
CONFIG_BOOTCOUNT_LIMIT=y
+CONFIG_SYS_BOOTCOUNT_ADDR=0xE011BFF8
# CONFIG_MMC is not set
CONFIG_MTD_NOR_FLASH=y
# CONFIG_PCI is not set
diff --git a/configs/kmlion1_defconfig b/configs/kmlion1_defconfig
index 9d4f3d7..12c06cc 100644
--- a/configs/kmlion1_defconfig
+++ b/configs/kmlion1_defconfig
@@ -35,6 +35,7 @@
CONFIG_BOOTP_GATEWAY=y
CONFIG_BOOTP_HOSTNAME=y
CONFIG_BOOTCOUNT_LIMIT=y
+CONFIG_SYS_BOOTCOUNT_ADDR=0xFB000020
# CONFIG_MMC is not set
CONFIG_SPI_FLASH=y
CONFIG_SPI_FLASH_SPANSION=y
diff --git a/configs/kmopti2_defconfig b/configs/kmopti2_defconfig
index 484804a..f3babb6 100644
--- a/configs/kmopti2_defconfig
+++ b/configs/kmopti2_defconfig
@@ -27,6 +27,7 @@
CONFIG_BOOTP_GATEWAY=y
CONFIG_BOOTP_HOSTNAME=y
CONFIG_BOOTCOUNT_LIMIT=y
+CONFIG_SYS_BOOTCOUNT_ADDR=0xE0113FF8
# CONFIG_MMC is not set
CONFIG_MTD_NOR_FLASH=y
# CONFIG_PCI is not set
diff --git a/configs/kmsupx5_defconfig b/configs/kmsupx5_defconfig
index 0a82ca3..ac3f336 100644
--- a/configs/kmsupx5_defconfig
+++ b/configs/kmsupx5_defconfig
@@ -27,6 +27,7 @@
CONFIG_BOOTP_GATEWAY=y
CONFIG_BOOTP_HOSTNAME=y
CONFIG_BOOTCOUNT_LIMIT=y
+CONFIG_SYS_BOOTCOUNT_ADDR=0xE0113FF8
# CONFIG_MMC is not set
CONFIG_MTD_NOR_FLASH=y
# CONFIG_PCI is not set
diff --git a/configs/kmtegr1_defconfig b/configs/kmtegr1_defconfig
index 1b2d3df..a5930ef 100644
--- a/configs/kmtegr1_defconfig
+++ b/configs/kmtegr1_defconfig
@@ -29,6 +29,7 @@
CONFIG_BOOTP_GATEWAY=y
CONFIG_BOOTP_HOSTNAME=y
CONFIG_BOOTCOUNT_LIMIT=y
+CONFIG_SYS_BOOTCOUNT_ADDR=0xE0113FF8
# CONFIG_MMC is not set
CONFIG_MTD_NOR_FLASH=y
# CONFIG_PCI is not set
diff --git a/configs/kmtepr2_defconfig b/configs/kmtepr2_defconfig
index c3dcf86..7441e4a 100644
--- a/configs/kmtepr2_defconfig
+++ b/configs/kmtepr2_defconfig
@@ -27,6 +27,7 @@
CONFIG_BOOTP_GATEWAY=y
CONFIG_BOOTP_HOSTNAME=y
CONFIG_BOOTCOUNT_LIMIT=y
+CONFIG_SYS_BOOTCOUNT_ADDR=0xE0113FF8
# CONFIG_MMC is not set
CONFIG_MTD_NOR_FLASH=y
# CONFIG_PCI is not set
diff --git a/configs/kmvect1_defconfig b/configs/kmvect1_defconfig
index 0dc165e..b415c9d 100644
--- a/configs/kmvect1_defconfig
+++ b/configs/kmvect1_defconfig
@@ -28,6 +28,7 @@
CONFIG_BOOTP_GATEWAY=y
CONFIG_BOOTP_HOSTNAME=y
CONFIG_BOOTCOUNT_LIMIT=y
+CONFIG_SYS_BOOTCOUNT_ADDR=0xE0113FF8
# CONFIG_MMC is not set
CONFIG_MTD_NOR_FLASH=y
# CONFIG_PCI is not set
diff --git a/configs/mx53ppd_defconfig b/configs/mx53ppd_defconfig
index 8fb5126..f4a0b9b 100644
--- a/configs/mx53ppd_defconfig
+++ b/configs/mx53ppd_defconfig
@@ -25,6 +25,7 @@
CONFIG_BOOTCOUNT_LIMIT=y
CONFIG_BOOTCOUNT_EXT=y
CONFIG_SYS_BOOTCOUNT_EXT_DEVPART="0:5"
+CONFIG_SYS_BOOTCOUNT_ADDR=0x7000A000
CONFIG_NETDEVICES=y
CONFIG_RTC_S35392A=y
CONFIG_USB=y
diff --git a/configs/socfpga_is1_defconfig b/configs/socfpga_is1_defconfig
index 4da9356..53b5c34 100644
--- a/configs/socfpga_is1_defconfig
+++ b/configs/socfpga_is1_defconfig
@@ -34,6 +34,7 @@
CONFIG_SPL_DM=y
CONFIG_SPL_DM_SEQ_ALIAS=y
CONFIG_BOOTCOUNT_LIMIT=y
+CONFIG_SYS_BOOTCOUNT_ADDR=0xfffffff8
CONFIG_FPGA_SOCFPGA=y
CONFIG_DM_GPIO=y
CONFIG_DWAPB_GPIO=y
diff --git a/configs/socfpga_sr1500_defconfig b/configs/socfpga_sr1500_defconfig
index bdc12e4..d7df688 100644
--- a/configs/socfpga_sr1500_defconfig
+++ b/configs/socfpga_sr1500_defconfig
@@ -38,6 +38,7 @@
CONFIG_SPL_DM=y
CONFIG_SPL_DM_SEQ_ALIAS=y
CONFIG_BOOTCOUNT_LIMIT=y
+CONFIG_SYS_BOOTCOUNT_ADDR=0xfffffff8
CONFIG_FPGA_SOCFPGA=y
CONFIG_DM_GPIO=y
CONFIG_DWAPB_GPIO=y
diff --git a/configs/suvd3_defconfig b/configs/suvd3_defconfig
index c75c802..0213101 100644
--- a/configs/suvd3_defconfig
+++ b/configs/suvd3_defconfig
@@ -27,6 +27,7 @@
CONFIG_BOOTP_GATEWAY=y
CONFIG_BOOTP_HOSTNAME=y
CONFIG_BOOTCOUNT_LIMIT=y
+CONFIG_SYS_BOOTCOUNT_ADDR=0xE0113FF8
# CONFIG_MMC is not set
CONFIG_MTD_NOR_FLASH=y
# CONFIG_PCI is not set
diff --git a/configs/tqma6s_wru4_mmc_defconfig b/configs/tqma6s_wru4_mmc_defconfig
index b6f5974..995a1ce 100644
--- a/configs/tqma6s_wru4_mmc_defconfig
+++ b/configs/tqma6s_wru4_mmc_defconfig
@@ -34,6 +34,7 @@
CONFIG_CMD_FS_GENERIC=y
CONFIG_ENV_IS_IN_MMC=y
CONFIG_BOOTCOUNT_LIMIT=y
+CONFIG_SYS_BOOTCOUNT_ADDR=0x00900000
CONFIG_LED_STATUS=y
CONFIG_LED_STATUS0=y
CONFIG_LED_STATUS_BIT=0
diff --git a/configs/tuge1_defconfig b/configs/tuge1_defconfig
index 262a5c5..278d35a 100644
--- a/configs/tuge1_defconfig
+++ b/configs/tuge1_defconfig
@@ -27,6 +27,7 @@
CONFIG_BOOTP_GATEWAY=y
CONFIG_BOOTP_HOSTNAME=y
CONFIG_BOOTCOUNT_LIMIT=y
+CONFIG_SYS_BOOTCOUNT_ADDR=0xE0113FF8
# CONFIG_MMC is not set
CONFIG_MTD_NOR_FLASH=y
# CONFIG_PCI is not set
diff --git a/configs/tuxx1_defconfig b/configs/tuxx1_defconfig
index a2c101e..6414ac2 100644
--- a/configs/tuxx1_defconfig
+++ b/configs/tuxx1_defconfig
@@ -27,6 +27,7 @@
CONFIG_BOOTP_GATEWAY=y
CONFIG_BOOTP_HOSTNAME=y
CONFIG_BOOTCOUNT_LIMIT=y
+CONFIG_SYS_BOOTCOUNT_ADDR=0xE0113FF8
# CONFIG_MMC is not set
CONFIG_MTD_NOR_FLASH=y
# CONFIG_PCI is not set
diff --git a/configs/x600_defconfig b/configs/x600_defconfig
index d1711e0..b63bf41 100644
--- a/configs/x600_defconfig
+++ b/configs/x600_defconfig
@@ -38,6 +38,7 @@
CONFIG_CMD_UBI=y
CONFIG_ENV_IS_IN_FLASH=y
CONFIG_BOOTCOUNT_LIMIT=y
+CONFIG_SYS_BOOTCOUNT_ADDR=0xD2801FF8
CONFIG_FPGA_XILINX=y
CONFIG_SYS_I2C_DW=y
# CONFIG_MMC is not set
diff --git a/drivers/bootcount/Kconfig b/drivers/bootcount/Kconfig
index c41b131..73972b7 100644
--- a/drivers/bootcount/Kconfig
+++ b/drivers/bootcount/Kconfig
@@ -111,8 +111,10 @@
config SYS_BOOTCOUNT_ADDR
hex "RAM address used for reading and writing the boot counter"
- default 0x7000A000
- depends on BOOTCOUNT_EXT
+ default 0x44E3E000 if BOOTCOUNT_AM33XX
+ default 0xE0115FF8 if ARCH_LS1043A || ARCH_LS1021A
+ depends on BOOTCOUNT_AM33XX || BOOTCOUNT_GENERIC || BOOTCOUNT_EXT || \
+ BOOTCOUNT_I2C
help
Set the address used for reading and writing the boot counter.
diff --git a/drivers/bootcount/bootcount.c b/drivers/bootcount/bootcount.c
index 8b499fe..67554fa 100644
--- a/drivers/bootcount/bootcount.c
+++ b/drivers/bootcount/bootcount.c
@@ -8,22 +8,7 @@
#include <bootcount.h>
#include <linux/compiler.h>
-/*
- * Only override CONFIG_SYS_BOOTCOUNT_ADDR if not already defined. This
- * way, some boards can define it directly in their config header.
- */
-#if !defined(CONFIG_SYS_BOOTCOUNT_ADDR)
-
-#if defined(CONFIG_QE)
-#include <linux/immap_qe.h>
-#define CONFIG_SYS_BOOTCOUNT_ADDR (CONFIG_SYS_IMMR + 0x110000 + \
- QE_MURAM_SIZE - 2 * sizeof(u32))
-#endif /* defined(CONFIG_QE) */
-
-#endif /* !defined(CONFIG_SYS_BOOTCOUNT_ADDR) */
-
/* Now implement the generic default functions */
-#if defined(CONFIG_SYS_BOOTCOUNT_ADDR)
__weak void bootcount_store(ulong a)
{
void *reg = (void *)CONFIG_SYS_BOOTCOUNT_ADDR;
@@ -54,4 +39,3 @@
return raw_bootcount_load(reg);
#endif /* defined(CONFIG_SYS_BOOTCOUNT_SINGLEWORD) */
}
-#endif /* defined(CONFIG_SYS_BOOTCOUNT_ADDR) */
diff --git a/include/configs/brppt1.h b/include/configs/brppt1.h
index 30ea2d2..02e989a 100644
--- a/include/configs/brppt1.h
+++ b/include/configs/brppt1.h
@@ -20,9 +20,6 @@
#define CONFIG_LCD_DT_SIMPLEFB
#define LCD_BPP LCD_COLOR32
-/* Bootcount using the RTC block */
-#define CONFIG_SYS_BOOTCOUNT_ADDR 0x44E3E000
-
/* memory */
#define CONFIG_SYS_MALLOC_LEN (5 * 1024 * 1024)
diff --git a/include/configs/calimain.h b/include/configs/calimain.h
index 854dc1f..364066f 100644
--- a/include/configs/calimain.h
+++ b/include/configs/calimain.h
@@ -274,7 +274,6 @@
#define CONFIG_SYS_INIT_SP_ADDR (0x8001ff00)
#define CONFIG_SYS_BOOTCOUNT_LE /* Use little-endian accessors */
-#define CONFIG_SYS_BOOTCOUNT_ADDR DAVINCI_RTC_BASE
#ifndef __ASSEMBLY__
int calimain_get_osc_freq(void);
diff --git a/include/configs/dh_imx6.h b/include/configs/dh_imx6.h
index 1f7fcca..abe393e 100644
--- a/include/configs/dh_imx6.h
+++ b/include/configs/dh_imx6.h
@@ -42,7 +42,6 @@
#define CONFIG_SYS_MALLOC_LEN (4 * SZ_1M)
/* Bootcounter */
-#define CONFIG_SYS_BOOTCOUNT_ADDR IRAM_BASE_ADDR
#define CONFIG_SYS_BOOTCOUNT_BE
/* FEC ethernet */
diff --git a/include/configs/ge_bx50v3.h b/include/configs/ge_bx50v3.h
index e4673d8..cbfe30d 100644
--- a/include/configs/ge_bx50v3.h
+++ b/include/configs/ge_bx50v3.h
@@ -263,6 +263,4 @@
#define CONFIG_BCH
-#define CONFIG_SYS_BOOTCOUNT_ADDR 0x7000A000
-
#endif /* __GE_BX50V3_CONFIG_H */
diff --git a/include/configs/highbank.h b/include/configs/highbank.h
index 0aa59bc..785cad7 100644
--- a/include/configs/highbank.h
+++ b/include/configs/highbank.h
@@ -25,7 +25,6 @@
#define CONFIG_CONS_INDEX 0
#define CONFIG_SYS_BOOTCOUNT_LE /* Use little-endian accessors */
-#define CONFIG_SYS_BOOTCOUNT_ADDR 0xfff3cf0c
#define CONFIG_MISC_INIT_R
#define CONFIG_SCSI_AHCI_PLAT
diff --git a/include/configs/ids8313.h b/include/configs/ids8313.h
index 12c3aff..a4acaa6 100644
--- a/include/configs/ids8313.h
+++ b/include/configs/ids8313.h
@@ -508,9 +508,6 @@
/* UBI Support */
#define CONFIG_MTD_PARTITIONS
-/* bootcount support */
-#define CONFIG_SYS_BOOTCOUNT_ADDR 0x9
-
#define CONFIG_IMAGE_FORMAT_LEGACY
#endif /* __CONFIG_H */
diff --git a/include/configs/km/kmp204x-common.h b/include/configs/km/kmp204x-common.h
index 7f735e0..f49f436 100644
--- a/include/configs/km/kmp204x-common.h
+++ b/include/configs/km/kmp204x-common.h
@@ -188,9 +188,6 @@
#define CONFIG_SYS_BR1_PRELIM CONFIG_SYS_QRIO_BR_PRELIM /* QRIO Base Address */
#define CONFIG_SYS_OR1_PRELIM CONFIG_SYS_QRIO_OR_PRELIM /* QRIO Options */
-/* bootcounter in QRIO */
-#define CONFIG_SYS_BOOTCOUNT_ADDR (CONFIG_SYS_QRIO_BASE + 0x20)
-
#define CONFIG_BOARD_EARLY_INIT_R /* call board_early_init_r function */
#define CONFIG_MISC_INIT_F
#define CONFIG_MISC_INIT_R
diff --git a/include/configs/socfpga_is1.h b/include/configs/socfpga_is1.h
index f2c3f40..88f9d4a 100644
--- a/include/configs/socfpga_is1.h
+++ b/include/configs/socfpga_is1.h
@@ -30,8 +30,6 @@
/*
* Bootcounter
*/
-/* last 2 lwords in OCRAM */
-#define CONFIG_SYS_BOOTCOUNT_ADDR 0xfffffff8
#define CONFIG_SYS_BOOTCOUNT_BE
#endif /* __CONFIG_SOCFPGA_IS1_H__ */
diff --git a/include/configs/socfpga_sr1500.h b/include/configs/socfpga_sr1500.h
index 8879817..492869b 100644
--- a/include/configs/socfpga_sr1500.h
+++ b/include/configs/socfpga_sr1500.h
@@ -29,8 +29,6 @@
/*
* Bootcounter
*/
-/* last 2 lwords in OCRAM */
-#define CONFIG_SYS_BOOTCOUNT_ADDR 0xfffffff8
#define CONFIG_SYS_BOOTCOUNT_BE
/* Environment setting for SPI flash */
diff --git a/include/configs/ti_am335x_common.h b/include/configs/ti_am335x_common.h
index 6c93fd3..8251ceb 100644
--- a/include/configs/ti_am335x_common.h
+++ b/include/configs/ti_am335x_common.h
@@ -38,13 +38,6 @@
#define CONFIG_DRIVER_TI_CPSW /* Driver for IP block */
/*
- * RTC related defines. To use bootcount you must set bootlimit in the
- * environment to a non-zero value and enable CONFIG_BOOTCOUNT_LIMIT
- * in the board config.
- */
-#define CONFIG_SYS_BOOTCOUNT_ADDR 0x44E3E000
-
-/*
* SPL related defines. The Public RAM memory map the ROM defines the
* area between 0x402F0400 and 0x4030B800 as a download area and
* 0x4030B800 to 0x4030CE00 as a public stack area. The ROM also
diff --git a/include/configs/tqma6_wru4.h b/include/configs/tqma6_wru4.h
index d94f790..24b62e7 100644
--- a/include/configs/tqma6_wru4.h
+++ b/include/configs/tqma6_wru4.h
@@ -34,7 +34,6 @@
/* LED */
/* Bootcounter */
-#define CONFIG_SYS_BOOTCOUNT_ADDR IRAM_BASE_ADDR
#define CONFIG_SYS_BOOTCOUNT_BE
#endif /* __CONFIG_TQMA6_WRU4_H */
diff --git a/include/configs/x600.h b/include/configs/x600.h
index 4bf8b10..485522c 100644
--- a/include/configs/x600.h
+++ b/include/configs/x600.h
@@ -116,10 +116,6 @@
#define CONFIG_SYS_MALLOC_LEN (8 << 20)
#define CONFIG_SYS_LOAD_ADDR 0x00800000
-/* Use last 2 lwords in internal SRAM for bootcounter */
-#define CONFIG_SYS_BOOTCOUNT_ADDR (CONFIG_SRAM_BASE + \
- CONFIG_SRAM_SIZE)
-
#define CONFIG_HOSTNAME x600
#define CONFIG_UBI_PART ubi0
#define CONFIG_UBIFS_VOLUME rootfs