ARM: hisilicon: hikey: Enable OF_CONTROL for hikey board.
Currently only the serial pl01x driver is using DT,
and the other drivers still use platform data but
as more DT lands in the upstream kernel the aim is
to migrate the other drivers over to DT as well to
have a fully DT configured hikey u-boot.
Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index d1c3157..6b65d8e 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -668,6 +668,7 @@
select DM
select DM_GPIO
select DM_SERIAL
+ select OF_CONTROL
help
Support for HiKey 96boards platform. It features a HI6220
SoC, with 8xA53 CPU, mali450 gpu, and 1GB RAM.
diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index aa31fd9..d1f8e22 100644
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -11,6 +11,8 @@
exynos4412-trats2.dtb \
exynos4412-odroid.dtb
+dtb-$(CONFIG_TARGET_HIKEY) += hi6220-hikey.dtb
+
dtb-$(CONFIG_EXYNOS5) += exynos5250-arndale.dtb \
exynos5250-snow.dtb \
exynos5250-spring.dtb \
diff --git a/board/hisilicon/hikey/hikey.c b/board/hisilicon/hikey/hikey.c
index 3b484a9..3f0a0cc 100644
--- a/board/hisilicon/hikey/hikey.c
+++ b/board/hisilicon/hikey/hikey.c
@@ -71,6 +71,8 @@
DECLARE_GLOBAL_DATA_PTR;
+#if !CONFIG_IS_ENABLED(OF_CONTROL)
+
static const struct pl01x_serial_platdata serial_platdata = {
#if CONFIG_CONS_INDEX == 1
.base = HI6220_UART0_BASE,
@@ -87,6 +89,7 @@
.name = "serial_pl01x",
.platdata = &serial_platdata,
};
+#endif
static struct mm_region hikey_mem_map[] = {
{
diff --git a/configs/hikey_defconfig b/configs/hikey_defconfig
index f5660ea..d150dd3 100644
--- a/configs/hikey_defconfig
+++ b/configs/hikey_defconfig
@@ -14,3 +14,4 @@
CONFIG_CMD_FAT=y
CONFIG_CMD_FS_GENERIC=y
CONFIG_OF_LIBFDT=y
+CONFIG_DEFAULT_DEVICE_TREE="hi6220-hikey"