Merge branch 'master' of git://git.denx.de/u-boot-arm
diff --git a/MAINTAINERS b/MAINTAINERS
index aafa061..fd346c9 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -65,6 +65,13 @@
T: git git://git.denx.de/u-boot-arm.git
F: arch/arm/
+ARM ALTERA SOCFPGA
+M: Marek Vasut <marex@denx.de>
+S: Maintainted
+T: git git://git.denx.de/u-boot-socfpga.git
+F: arch/arm/cpu/armv7/socfpga/
+F: board/altera/socfpga/
+
ARM ATMEL AT91
M: Andreas Bießmann <andreas.devel@googlemail.com>
S: Maintained
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 43ba33a..72558b8 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -336,6 +336,9 @@
config ARCH_EXYNOS
bool "Samsung EXYNOS"
+config ARCH_S5PC1XX
+ bool "Samsung S5PC1XX"
+
config ARCH_HIGHBANK
bool "Calxeda Highbank"
@@ -414,6 +417,9 @@
config TARGET_TQMA6
bool "TQ Systems TQMa6 board"
+config TARGET_OT1200
+ bool "Bachmann OT1200"
+
config OMAP34XX
bool "OMAP34XX SoC"
@@ -429,12 +435,6 @@
config TARGET_CM_FX6
bool "Support cm_fx6"
-config TARGET_S5P_GONI
- bool "Support s5p_goni"
-
-config TARGET_SMDKC100
- bool "Support smdkc100"
-
config TARGET_SOCFPGA_CYCLONE5
bool "Support socfpga_cyclone5"
@@ -550,6 +550,8 @@
source "arch/arm/cpu/armv7/rmobile/Kconfig"
+source "arch/arm/cpu/armv7/s5pc1xx/Kconfig"
+
source "arch/arm/cpu/armv7/tegra-common/Kconfig"
source "arch/arm/cpu/armv7/uniphier/Kconfig"
@@ -583,6 +585,7 @@
source "board/atmel/at91sam9x5ek/Kconfig"
source "board/atmel/sama5d3_xplained/Kconfig"
source "board/atmel/sama5d3xek/Kconfig"
+source "board/bachmann/ot1200/Kconfig"
source "board/balloon3/Kconfig"
source "board/barco/titanium/Kconfig"
source "board/bluegiga/apx4devkit/Kconfig"
@@ -657,9 +660,7 @@
source "board/ronetix/pm9261/Kconfig"
source "board/ronetix/pm9263/Kconfig"
source "board/ronetix/pm9g45/Kconfig"
-source "board/samsung/goni/Kconfig"
source "board/samsung/smdk2410/Kconfig"
-source "board/samsung/smdkc100/Kconfig"
source "board/sandisk/sansa_fuze_plus/Kconfig"
source "board/scb9328/Kconfig"
source "board/schulercontrol/sc_sps_1/Kconfig"
diff --git a/arch/arm/cpu/arm1136/mx31/timer.c b/arch/arm/cpu/arm1136/mx31/timer.c
index f111242..3a81ce4 100644
--- a/arch/arm/cpu/arm1136/mx31/timer.c
+++ b/arch/arm/cpu/arm1136/mx31/timer.c
@@ -7,9 +7,6 @@
#include <common.h>
#include <asm/arch/imx-regs.h>
-#include <asm/arch/clock.h>
-#include <div64.h>
-#include <watchdog.h>
#include <asm/io.h>
#define TIMER_BASE 0x53f90000 /* General purpose timer 1 */
@@ -28,57 +25,6 @@
DECLARE_GLOBAL_DATA_PTR;
-/*
- * "time" is measured in 1 / CONFIG_SYS_HZ seconds,
- * "tick" is internal timer period
- */
-
-#ifdef CONFIG_MX31_TIMER_HIGH_PRECISION
-/* ~0.4% error - measured with stop-watch on 100s boot-delay */
-static inline unsigned long long tick_to_time(unsigned long long tick)
-{
- tick *= CONFIG_SYS_HZ;
- do_div(tick, MXC_CLK32);
- return tick;
-}
-
-static inline unsigned long long time_to_tick(unsigned long long time)
-{
- time *= MXC_CLK32;
- do_div(time, CONFIG_SYS_HZ);
- return time;
-}
-
-static inline unsigned long long us_to_tick(unsigned long long us)
-{
- us = us * MXC_CLK32 + 999999;
- do_div(us, 1000000);
- return us;
-}
-#else
-/* ~2% error */
-#define TICK_PER_TIME ((MXC_CLK32 + CONFIG_SYS_HZ / 2) / CONFIG_SYS_HZ)
-#define US_PER_TICK (1000000 / MXC_CLK32)
-
-static inline unsigned long long tick_to_time(unsigned long long tick)
-{
- do_div(tick, TICK_PER_TIME);
- return tick;
-}
-
-static inline unsigned long long time_to_tick(unsigned long long time)
-{
- return time * TICK_PER_TIME;
-}
-
-static inline unsigned long long us_to_tick(unsigned long long us)
-{
- us += US_PER_TICK - 1;
- do_div(us, US_PER_TICK);
- return us;
-}
-#endif
-
/* The 32768Hz 32-bit timer overruns in 131072 seconds */
int timer_init(void)
{
@@ -95,53 +41,7 @@
return 0;
}
-unsigned long long get_ticks(void)
-{
- ulong now = GPTCNT; /* current tick value */
-
- if (now >= gd->arch.lastinc) /* normal mode (non roll) */
- /* move stamp forward with absolut diff ticks */
- gd->arch.tbl += (now - gd->arch.lastinc);
- else /* we have rollover of incrementer */
- gd->arch.tbl += (0xFFFFFFFF - gd->arch.lastinc) + now;
- gd->arch.lastinc = now;
- return gd->arch.tbl;
-}
-
-ulong get_timer_masked(void)
-{
- /*
- * get_ticks() returns a long long (64 bit), it wraps in
- * 2^64 / MXC_CLK32 = 2^64 / 2^15 = 2^49 ~ 5 * 10^14 (s) ~
- * 5 * 10^9 days... and get_ticks() * CONFIG_SYS_HZ wraps in
- * 5 * 10^6 days - long enough.
- */
- return tick_to_time(get_ticks());
-}
-
-ulong get_timer(ulong base)
-{
- return get_timer_masked() - base;
-}
-
-/* delay x useconds AND preserve advance timestamp value */
-void __udelay(unsigned long usec)
-{
- unsigned long long tmp;
- ulong tmo;
-
- tmo = us_to_tick(usec);
- tmp = get_ticks() + tmo; /* get current timestamp */
-
- while (get_ticks() < tmp) /* loop till event */
- /*NOP*/;
-}
-
-/*
- * This function is derived from PowerPC code (timebase clock frequency).
- * On ARM it returns the number of timer ticks per second.
- */
-ulong get_tbclk(void)
+unsigned long timer_read_counter(void)
{
- return MXC_CLK32;
+ return GPTCNT;
}
diff --git a/arch/arm/cpu/arm1136/mx35/timer.c b/arch/arm/cpu/arm1136/mx35/timer.c
index cc6166f..4edf533 100644
--- a/arch/arm/cpu/arm1136/mx35/timer.c
+++ b/arch/arm/cpu/arm1136/mx35/timer.c
@@ -9,16 +9,11 @@
#include <common.h>
#include <asm/io.h>
-#include <div64.h>
#include <asm/arch/imx-regs.h>
#include <asm/arch/crm_regs.h>
-#include <asm/arch/clock.h>
DECLARE_GLOBAL_DATA_PTR;
-#define timestamp (gd->arch.tbl)
-#define lastinc (gd->arch.lastinc)
-
/* General purpose timers bitfields */
#define GPTCR_SWR (1<<15) /* Software reset */
#define GPTCR_FRR (1<<9) /* Freerun / restart */
@@ -26,27 +21,6 @@
#define GPTCR_TEN (1) /* Timer enable */
/*
- * "time" is measured in 1 / CONFIG_SYS_HZ seconds,
- * "tick" is internal timer period
- */
-/* ~0.4% error - measured with stop-watch on 100s boot-delay */
-static inline unsigned long long tick_to_time(unsigned long long tick)
-{
- tick *= CONFIG_SYS_HZ;
- do_div(tick, MXC_CLK32);
-
- return tick;
-}
-
-static inline unsigned long long us_to_tick(unsigned long long us)
-{
- us = us * MXC_CLK32 + 999999;
- do_div(us, 1000000);
-
- return us;
-}
-
-/*
* nothing really to do with interrupts, just starts up a counter.
* The 32KHz 32-bit timer overruns in 134217 seconds
*/
@@ -71,60 +45,3 @@
return 0;
}
-
-unsigned long long get_ticks(void)
-{
- struct gpt_regs *gpt = (struct gpt_regs *)GPT1_BASE_ADDR;
- ulong now = readl(&gpt->counter); /* current tick value */
-
- if (now >= lastinc) {
- /*
- * normal mode (non roll)
- * move stamp forward with absolut diff ticks
- */
- timestamp += (now - lastinc);
- } else {
- /* we have rollover of incrementer */
- timestamp += (0xFFFFFFFF - lastinc) + now;
- }
- lastinc = now;
- return timestamp;
-}
-
-ulong get_timer_masked(void)
-{
- /*
- * get_ticks() returns a long long (64 bit), it wraps in
- * 2^64 / MXC_CLK32 = 2^64 / 2^15 = 2^49 ~ 5 * 10^14 (s) ~
- * 5 * 10^9 days... and get_ticks() * CONFIG_SYS_HZ wraps in
- * 5 * 10^6 days - long enough.
- */
- return tick_to_time(get_ticks());
-}
-
-ulong get_timer(ulong base)
-{
- return get_timer_masked() - base;
-}
-
-/* delay x useconds AND preserve advance timstamp value */
-void __udelay(unsigned long usec)
-{
- unsigned long long tmp;
- ulong tmo;
-
- tmo = us_to_tick(usec);
- tmp = get_ticks() + tmo; /* get current timestamp */
-
- while (get_ticks() < tmp) /* loop till event */
- /*NOP*/;
-}
-
-/*
- * This function is derived from PowerPC code (timebase clock frequency).
- * On ARM it returns the number of timer ticks per second.
- */
-ulong get_tbclk(void)
-{
- return MXC_CLK32;
-}
diff --git a/arch/arm/cpu/arm926ejs/mxs/spl_mem_init.c b/arch/arm/cpu/arm926ejs/mxs/spl_mem_init.c
index 3baf4dd..97ef67d 100644
--- a/arch/arm/cpu/arm926ejs/mxs/spl_mem_init.c
+++ b/arch/arm/cpu/arm926ejs/mxs/spl_mem_init.c
@@ -240,9 +240,14 @@
struct mxs_power_regs *power_regs =
(struct mxs_power_regs *)MXS_POWER_BASE;
+ /* We must wait before and after disabling the current limiter! */
+ early_delay(10000);
+
clrbits_le32(&power_regs->hw_power_vddmemctrl,
POWER_VDDMEMCTRL_ENABLE_ILIMIT);
+ early_delay(10000);
+
}
static void mx23_mem_init(void)
@@ -269,7 +274,13 @@
setbits_le32(MXS_DRAM_BASE + 0x20, 1 << 16);
clrbits_le32(MXS_DRAM_BASE + 0x40, 1 << 17);
- early_delay(20000);
+
+ /* Wait for EMI_STAT bit DRAM_HALTED */
+ for (;;) {
+ if (!(readl(MXS_EMI_BASE + 0x10) & (1 << 1)))
+ break;
+ early_delay(1000);
+ }
/* Adjust EMI port priority. */
clrsetbits_le32(0x80020000, 0x1f << 16, 0x2);
diff --git a/arch/arm/cpu/armv7/exynos/Kconfig b/arch/arm/cpu/armv7/exynos/Kconfig
index e7c93d8..7a0d182 100644
--- a/arch/arm/cpu/armv7/exynos/Kconfig
+++ b/arch/arm/cpu/armv7/exynos/Kconfig
@@ -5,6 +5,7 @@
config TARGET_SMDKV310
bool "Exynos4210 SMDKV310 board"
+ select OF_CONTROL if !SPL_BUILD
config TARGET_TRATS
bool "Exynos4210 Trats board"
diff --git a/arch/arm/cpu/armv7/mx6/clock.c b/arch/arm/cpu/armv7/mx6/clock.c
index 336e557..d200531 100644
--- a/arch/arm/cpu/armv7/mx6/clock.c
+++ b/arch/arm/cpu/armv7/mx6/clock.c
@@ -642,6 +642,33 @@
BM_ANADIG_PLL_ENET_ENABLE_PCIE);
}
+#ifdef CONFIG_SECURE_BOOT
+void hab_caam_clock_enable(unsigned char enable)
+{
+ u32 reg;
+
+ /* CG4 ~ CG6, CAAM clocks */
+ reg = __raw_readl(&imx_ccm->CCGR0);
+ if (enable)
+ reg |= (MXC_CCM_CCGR0_CAAM_WRAPPER_IPG_MASK |
+ MXC_CCM_CCGR0_CAAM_WRAPPER_ACLK_MASK |
+ MXC_CCM_CCGR0_CAAM_SECURE_MEM_MASK);
+ else
+ reg &= ~(MXC_CCM_CCGR0_CAAM_WRAPPER_IPG_MASK |
+ MXC_CCM_CCGR0_CAAM_WRAPPER_ACLK_MASK |
+ MXC_CCM_CCGR0_CAAM_SECURE_MEM_MASK);
+ __raw_writel(reg, &imx_ccm->CCGR0);
+
+ /* EMI slow clk */
+ reg = __raw_readl(&imx_ccm->CCGR6);
+ if (enable)
+ reg |= MXC_CCM_CCGR6_EMI_SLOW_MASK;
+ else
+ reg &= ~MXC_CCM_CCGR6_EMI_SLOW_MASK;
+ __raw_writel(reg, &imx_ccm->CCGR6);
+}
+#endif
+
unsigned int mxc_get_clock(enum mxc_clock clk)
{
switch (clk) {
diff --git a/arch/arm/cpu/armv7/mx6/hab.c b/arch/arm/cpu/armv7/mx6/hab.c
index f6810a6..8dee595 100644
--- a/arch/arm/cpu/armv7/mx6/hab.c
+++ b/arch/arm/cpu/armv7/mx6/hab.c
@@ -1,12 +1,14 @@
/*
- * Copyright (C) 2010-2013 Freescale Semiconductor, Inc.
+ * Copyright (C) 2010-2014 Freescale Semiconductor, Inc.
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
#include <asm/io.h>
+#include <asm/system.h>
#include <asm/arch/hab.h>
+#include <asm/arch/clock.h>
#include <asm/arch/sys_proto.h>
/* -------- start of HAB API updates ------------*/
@@ -71,6 +73,44 @@
((hab_rvt_exit_t *)HAB_RVT_EXIT) \
)
+#define IVT_SIZE 0x20
+#define ALIGN_SIZE 0x1000
+#define CSF_PAD_SIZE 0x2000
+#define MX6DQ_PU_IROM_MMU_EN_VAR 0x009024a8
+#define MX6DLS_PU_IROM_MMU_EN_VAR 0x00901dd0
+#define MX6SL_PU_IROM_MMU_EN_VAR 0x00900a18
+
+/*
+ * +------------+ 0x0 (DDR_UIMAGE_START) -
+ * | Header | |
+ * +------------+ 0x40 |
+ * | | |
+ * | | |
+ * | | |
+ * | | |
+ * | Image Data | |
+ * . | |
+ * . | > Stuff to be authenticated ----+
+ * . | | |
+ * | | | |
+ * | | | |
+ * +------------+ | |
+ * | | | |
+ * | Fill Data | | |
+ * | | | |
+ * +------------+ Align to ALIGN_SIZE | |
+ * | IVT | | |
+ * +------------+ + IVT_SIZE - |
+ * | | |
+ * | CSF DATA | <---------------------------------------------------------+
+ * | |
+ * +------------+
+ * | |
+ * | Fill Data |
+ * | |
+ * +------------+ + CSF_PAD_SIZE
+ */
+
bool is_hab_enabled(void)
{
struct ocotp_regs *ocotp = (struct ocotp_regs *)OCOTP_BASE_ADDR;
@@ -144,6 +184,108 @@
return 0;
}
+uint32_t authenticate_image(uint32_t ddr_start, uint32_t image_size)
+{
+ uint32_t load_addr = 0;
+ size_t bytes;
+ ptrdiff_t ivt_offset = 0;
+ int result = 0;
+ ulong start;
+ hab_rvt_authenticate_image_t *hab_rvt_authenticate_image;
+ hab_rvt_entry_t *hab_rvt_entry;
+ hab_rvt_exit_t *hab_rvt_exit;
+
+ hab_rvt_authenticate_image = hab_rvt_authenticate_image_p;
+ hab_rvt_entry = hab_rvt_entry_p;
+ hab_rvt_exit = hab_rvt_exit_p;
+
+ if (is_hab_enabled()) {
+ printf("\nAuthenticate image from DDR location 0x%x...\n",
+ ddr_start);
+
+ hab_caam_clock_enable(1);
+
+ if (hab_rvt_entry() == HAB_SUCCESS) {
+ /* If not already aligned, Align to ALIGN_SIZE */
+ ivt_offset = (image_size + ALIGN_SIZE - 1) &
+ ~(ALIGN_SIZE - 1);
+
+ start = ddr_start;
+ bytes = ivt_offset + IVT_SIZE + CSF_PAD_SIZE;
+#ifdef DEBUG
+ printf("\nivt_offset = 0x%x, ivt addr = 0x%x\n",
+ ivt_offset, ddr_start + ivt_offset);
+ puts("Dumping IVT\n");
+ print_buffer(ddr_start + ivt_offset,
+ (void *)(ddr_start + ivt_offset),
+ 4, 0x8, 0);
+
+ puts("Dumping CSF Header\n");
+ print_buffer(ddr_start + ivt_offset+IVT_SIZE,
+ (void *)(ddr_start + ivt_offset+IVT_SIZE),
+ 4, 0x10, 0);
+
+ get_hab_status();
+
+ puts("\nCalling authenticate_image in ROM\n");
+ printf("\tivt_offset = 0x%x\n", ivt_offset);
+ printf("\tstart = 0x%08lx\n", start);
+ printf("\tbytes = 0x%x\n", bytes);
+#endif
+ /*
+ * If the MMU is enabled, we have to notify the ROM
+ * code, or it won't flush the caches when needed.
+ * This is done, by setting the "pu_irom_mmu_enabled"
+ * word to 1. You can find its address by looking in
+ * the ROM map. This is critical for
+ * authenticate_image(). If MMU is enabled, without
+ * setting this bit, authentication will fail and may
+ * crash.
+ */
+ /* Check MMU enabled */
+ if (get_cr() & CR_M) {
+ if (is_cpu_type(MXC_CPU_MX6Q) ||
+ is_cpu_type(MXC_CPU_MX6D)) {
+ /*
+ * This won't work on Rev 1.0.0 of
+ * i.MX6Q/D, since their ROM doesn't
+ * do cache flushes. don't think any
+ * exist, so we ignore them.
+ */
+ writel(1, MX6DQ_PU_IROM_MMU_EN_VAR);
+ } else if (is_cpu_type(MXC_CPU_MX6DL) ||
+ is_cpu_type(MXC_CPU_MX6SOLO)) {
+ writel(1, MX6DLS_PU_IROM_MMU_EN_VAR);
+ } else if (is_cpu_type(MXC_CPU_MX6SL)) {
+ writel(1, MX6SL_PU_IROM_MMU_EN_VAR);
+ }
+ }
+
+ load_addr = (uint32_t)hab_rvt_authenticate_image(
+ HAB_CID_UBOOT,
+ ivt_offset, (void **)&start,
+ (size_t *)&bytes, NULL);
+ if (hab_rvt_exit() != HAB_SUCCESS) {
+ puts("hab exit function fail\n");
+ load_addr = 0;
+ }
+ } else {
+ puts("hab entry function fail\n");
+ }
+
+ hab_caam_clock_enable(0);
+
+ get_hab_status();
+ } else {
+ puts("hab fuse not enabled\n");
+ }
+
+ if ((!is_hab_enabled()) || (load_addr != 0))
+ result = 1;
+
+ return result;
+}
+
int do_hab_status(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
{
if ((argc != 1)) {
@@ -156,8 +298,33 @@
return 0;
}
+static int do_authenticate_image(cmd_tbl_t *cmdtp, int flag, int argc,
+ char * const argv[])
+{
+ ulong addr, ivt_offset;
+ int rcode = 0;
+
+ if (argc < 3)
+ return CMD_RET_USAGE;
+
+ addr = simple_strtoul(argv[1], NULL, 16);
+ ivt_offset = simple_strtoul(argv[2], NULL, 16);
+
+ rcode = authenticate_image(addr, ivt_offset);
+
+ return rcode;
+}
+
U_BOOT_CMD(
hab_status, CONFIG_SYS_MAXARGS, 1, do_hab_status,
"display HAB status",
""
);
+
+U_BOOT_CMD(
+ hab_auth_img, 3, 0, do_authenticate_image,
+ "authenticate image via HAB",
+ "addr ivt_offset\n"
+ "addr - image hex address\n"
+ "ivt_offset - hex offset of IVT in the image"
+ );
diff --git a/arch/arm/cpu/armv7/mx6/soc.c b/arch/arm/cpu/armv7/mx6/soc.c
index ba21cfe..6352422 100644
--- a/arch/arm/cpu/armv7/mx6/soc.c
+++ b/arch/arm/cpu/armv7/mx6/soc.c
@@ -273,10 +273,25 @@
#ifndef CONFIG_SYS_DCACHE_OFF
void enable_caches(void)
{
+#if defined(CONFIG_SYS_ARM_CACHE_WRITETHROUGH)
+ enum dcache_option option = DCACHE_WRITETHROUGH;
+#else
+ enum dcache_option option = DCACHE_WRITEBACK;
+#endif
+
/* Avoid random hang when download by usb */
invalidate_dcache_all();
+
/* Enable D-cache. I-cache is already enabled in start.S */
dcache_enable();
+
+ /* Enable caching on OCRAM and ROM */
+ mmu_set_region_dcache_behaviour(ROMCP_ARB_BASE_ADDR,
+ ROMCP_ARB_END_ADDR,
+ option);
+ mmu_set_region_dcache_behaviour(IRAM_BASE_ADDR,
+ IRAM_SIZE,
+ option);
}
#endif
@@ -339,10 +354,10 @@
void s_init(void)
{
struct anatop_regs *anatop = (struct anatop_regs *)ANATOP_BASE_ADDR;
- int is_6q = is_cpu_type(MXC_CPU_MX6Q);
+ struct mxc_ccm_reg *ccm = (struct mxc_ccm_reg *)CCM_BASE_ADDR;
u32 mask480;
u32 mask528;
-
+ u32 reg, periph1, periph2;
if (is_cpu_type(MXC_CPU_MX6SX))
return;
@@ -357,15 +372,23 @@
ANATOP_PFD_CLKGATE_MASK(1) |
ANATOP_PFD_CLKGATE_MASK(2) |
ANATOP_PFD_CLKGATE_MASK(3);
- mask528 = ANATOP_PFD_CLKGATE_MASK(0) |
- ANATOP_PFD_CLKGATE_MASK(1) |
+ mask528 = ANATOP_PFD_CLKGATE_MASK(1) |
ANATOP_PFD_CLKGATE_MASK(3);
- /*
- * Don't reset PFD2 on DL/S
- */
- if (is_6q)
+ reg = readl(&ccm->cbcmr);
+ periph2 = ((reg & MXC_CCM_CBCMR_PRE_PERIPH2_CLK_SEL_MASK)
+ >> MXC_CCM_CBCMR_PRE_PERIPH2_CLK_SEL_OFFSET);
+ periph1 = ((reg & MXC_CCM_CBCMR_PRE_PERIPH_CLK_SEL_MASK)
+ >> MXC_CCM_CBCMR_PRE_PERIPH_CLK_SEL_OFFSET);
+
+ /* Checking if PLL2 PFD0 or PLL2 PFD2 is using for periph clock */
+ if ((periph2 != 0x2) && (periph1 != 0x2))
+ mask528 |= ANATOP_PFD_CLKGATE_MASK(0);
+
+ if ((periph2 != 0x1) && (periph1 != 0x1) &&
+ (periph2 != 0x3) && (periph1 != 0x3))
mask528 |= ANATOP_PFD_CLKGATE_MASK(2);
+
writel(mask480, &anatop->pfd_480_set);
writel(mask528, &anatop->pfd_528_set);
writel(mask480, &anatop->pfd_480_clr);
diff --git a/arch/arm/cpu/armv7/rmobile/lowlevel_init_ca15.S b/arch/arm/cpu/armv7/rmobile/lowlevel_init_ca15.S
index 287f8d7..879e0e0 100644
--- a/arch/arm/cpu/armv7/rmobile/lowlevel_init_ca15.S
+++ b/arch/arm/cpu/armv7/rmobile/lowlevel_init_ca15.S
@@ -35,6 +35,13 @@
*/
.align 4
do_lowlevel_init:
+ ldr r2, =0xFF000044 /* PRR */
+ ldr r1, [r2]
+ and r1, r1, #0x7F00
+ lsrs r1, r1, #8
+ cmp r1, #0x4C /* 0x4C is ID of r8a7794 */
+ beq _exit_init_l2_a15
+
/* surpress wfe if ca15 */
tst r4, #4
mrceq p15, 0, r0, c1, c0, 1 /* actlr */
@@ -42,11 +49,6 @@
mcreq p15, 0, r0, c1, c0, 1
/* and set l2 latency */
- mrceq p15, 1, r0, c9, c0, 2 /* l2ctlr */
- orreq r0, r0, #0x00000800
- orreq r0, r0, #0x00000003
- mcreq p15, 1, r0, c9, c0, 2
-
mrc p15, 0, r0, c0, c0, 5 /* r0 = MPIDR */
and r0, r0, #0xf00
lsr r0, r0, #8
@@ -58,7 +60,15 @@
cmp r1, #3 /* has already been set up */
bicne r0, r0, #0xe7
orrne r0, r0, #0x83 /* L2CTLR[7:6] + L2CTLR[2:0] */
- orrne r0, r0, #0x20 /* L2CTLR[5] */
+
+ ldr r2, =0xFF000044 /* PRR */
+ ldr r1, [r2]
+ and r1, r1, #0x7F00
+ lsrs r1, r1, #8
+ cmp r1, #0x45 /* 0x45 is ID of r8a7790 */
+ bne L2CTLR_5_SKIP
+ orrne r0, r0, #0x20 /* L2CTLR[5] */
+L2CTLR_5_SKIP:
mcrne p15, 1, r0, c9, c0, 2
_exit_init_l2_a15:
diff --git a/arch/arm/cpu/armv7/s5pc1xx/Kconfig b/arch/arm/cpu/armv7/s5pc1xx/Kconfig
new file mode 100644
index 0000000..2fbbc18
--- /dev/null
+++ b/arch/arm/cpu/armv7/s5pc1xx/Kconfig
@@ -0,0 +1,25 @@
+if ARCH_S5PC1XX
+
+choice
+ prompt "S5PC1XX board select"
+
+config TARGET_S5P_GONI
+ bool "S5P Goni board"
+ select OF_CONTROL if !SPL_BUILD
+
+config TARGET_SMDKC100
+ bool "Support smdkc100 board"
+ select OF_CONTROL if !SPL_BUILD
+
+endchoice
+
+config SYS_CPU
+ default "armv7"
+
+config SYS_SOC
+ default "s5pc1xx"
+
+source "board/samsung/goni/Kconfig"
+source "board/samsung/smdkc100/Kconfig"
+
+endif
diff --git a/arch/arm/cpu/armv7/s5pc1xx/cache.S b/arch/arm/cpu/armv7/s5pc1xx/cache.S
deleted file mode 100644
index 3089592..0000000
--- a/arch/arm/cpu/armv7/s5pc1xx/cache.S
+++ /dev/null
@@ -1,30 +0,0 @@
-/*
- * Copyright (C) 2009 Samsung Electronics
- * Minkyu Kang <mk7.kang@samsung.com>
- *
- * based on arch/arm/cpu/armv7/omap3/cache.S
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-.align 5
-
-#include <linux/linkage.h>
-
-#ifndef CONFIG_SYS_L2CACHE_OFF
-ENTRY(v7_outer_cache_enable)
- push {r0, r1, r2, lr}
- mrc 15, 0, r3, cr1, cr0, 1
- orr r3, r3, #2
- mcr 15, 0, r3, cr1, cr0, 1
- pop {r1, r2, r3, pc}
-ENDPROC(v7_outer_cache_enable)
-
-ENTRY(v7_outer_cache_disable)
- push {r0, r1, r2, lr}
- mrc 15, 0, r3, cr1, cr0, 1
- bic r3, r3, #2
- mcr 15, 0, r3, cr1, cr0, 1
- pop {r1, r2, r3, pc}
-ENDPROC(v7_outer_cache_disable)
-#endif
diff --git a/arch/arm/cpu/armv7/s5pc1xx/cache.c b/arch/arm/cpu/armv7/s5pc1xx/cache.c
new file mode 100644
index 0000000..51af299
--- /dev/null
+++ b/arch/arm/cpu/armv7/s5pc1xx/cache.c
@@ -0,0 +1,47 @@
+/*
+ * Copyright (C) 2014 Samsung Electronics
+ * Minkyu Kang <mk7.kang@samsung.com>
+ * Robert Baldyga <r.baldyga@samsung.com>
+ *
+ * based on arch/arm/cpu/armv7/omap3/cache.S
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+
+#ifndef CONFIG_SYS_DCACHE_OFF
+void enable_caches(void)
+{
+ dcache_enable();
+}
+
+void disable_caches(void)
+{
+ dcache_disable();
+}
+#endif
+
+#ifndef CONFIG_SYS_L2CACHE_OFF
+void v7_outer_cache_enable(void)
+{
+ __asm(
+ "push {r0, r1, r2, lr}\n\t"
+ "mrc 15, 0, r3, cr1, cr0, 1\n\t"
+ "orr r3, r3, #2\n\t"
+ "mcr 15, 0, r3, cr1, cr0, 1\n\t"
+ "pop {r1, r2, r3, pc}"
+ );
+}
+
+void v7_outer_cache_disable(void)
+{
+ __asm(
+ "push {r0, r1, r2, lr}\n\t"
+ "mrc 15, 0, r3, cr1, cr0, 1\n\t"
+ "bic r3, r3, #2\n\t"
+ "mcr 15, 0, r3, cr1, cr0, 1\n\t"
+ "pop {r1, r2, r3, pc}"
+ );
+}
+#endif
diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index 5f2b946..c37580e 100644
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -1,4 +1,7 @@
+dtb-$(CONFIG_S5PC100) += s5pc1xx-smdkc100.dtb
+dtb-$(CONFIG_S5PC110) += s5pc1xx-goni.dtb
dtb-$(CONFIG_EXYNOS4) += exynos4210-origen.dtb \
+ exynos4210-smdkv310.dtb \
exynos4210-universal_c210.dtb \
exynos4210-trats.dtb \
exynos4412-trats2.dtb \
diff --git a/arch/arm/dts/exynos4210-smdkv310.dts b/arch/arm/dts/exynos4210-smdkv310.dts
new file mode 100644
index 0000000..c390c8f
--- /dev/null
+++ b/arch/arm/dts/exynos4210-smdkv310.dts
@@ -0,0 +1,21 @@
+/*
+ * Samsung's Exynos4210-based SMDKV310 board device tree source
+ *
+ * Copyright (c) 2014 Google, Inc
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+/dts-v1/;
+/include/ "exynos4.dtsi"
+
+/ {
+ model = "Samsung SMDKV310 on Exynos4210";
+ compatible = "samsung,smdkv310", "samsung,exynos4210";
+
+ aliases {
+ serial0 = "/serial@13800000";
+ console = "/serial@13820000";
+ };
+
+};
diff --git a/arch/arm/dts/exynos5420-peach-pit.dts b/arch/arm/dts/exynos5420-peach-pit.dts
index 3ed70a8..995e62b 100644
--- a/arch/arm/dts/exynos5420-peach-pit.dts
+++ b/arch/arm/dts/exynos5420-peach-pit.dts
@@ -28,11 +28,66 @@
pmic = "/i2c@12ca0000";
};
+ cros-ec-keyb {
+ compatible = "google,cros-ec-keyb";
+ google,key-rows = <8>;
+ google,key-columns = <13>;
+ google,repeat-delay-ms = <240>;
+ google,repeat-rate-ms = <30>;
+ google,ghost-filter;
+ /*
+ * Keymap entries take the form of 0xRRCCKKKK where
+ * RR=Row CC=Column KKKK=Key Code
+ * The values below are for a US keyboard layout and
+ * are taken from the Linux driver. Note that the
+ * 102ND key is not used for US keyboards.
+ */
+ linux,keymap = <
+ /* CAPSLCK F1 B F10 */
+ 0x0001003a 0x0002003b 0x00030030 0x00040044
+ /* N = R_ALT ESC */
+ 0x00060031 0x0008000d 0x000a0064 0x01010001
+ /* F4 G F7 H */
+ 0x0102003e 0x01030022 0x01040041 0x01060023
+ /* ' F9 BKSPACE L_CTRL */
+ 0x01080028 0x01090043 0x010b000e 0x0200001d
+ /* TAB F3 T F6 */
+ 0x0201000f 0x0202003d 0x02030014 0x02040040
+ /* ] Y 102ND [ */
+ 0x0205001b 0x02060015 0x02070056 0x0208001a
+ /* F8 GRAVE F2 5 */
+ 0x02090042 0x03010029 0x0302003c 0x03030006
+ /* F5 6 - \ */
+ 0x0304003f 0x03060007 0x0308000c 0x030b002b
+ /* R_CTRL A D F */
+ 0x04000061 0x0401001e 0x04020020 0x04030021
+ /* S K J ; */
+ 0x0404001f 0x04050025 0x04060024 0x04080027
+ /* L ENTER Z C */
+ 0x04090026 0x040b001c 0x0501002c 0x0502002e
+ /* V X , M */
+ 0x0503002f 0x0504002d 0x05050033 0x05060032
+ /* L_SHIFT / . SPACE */
+ 0x0507002a 0x05080035 0x05090034 0x050B0039
+ /* 1 3 4 2 */
+ 0x06010002 0x06020004 0x06030005 0x06040003
+ /* 8 7 0 9 */
+ 0x06050009 0x06060008 0x0608000b 0x0609000a
+ /* L_ALT DOWN RIGHT Q */
+ 0x060a0038 0x060b006c 0x060c006a 0x07010010
+ /* E R W I */
+ 0x07020012 0x07030013 0x07040011 0x07050017
+ /* U R_SHIFT P O */
+ 0x07060016 0x07070036 0x07080019 0x07090018
+ /* UP LEFT */
+ 0x070b0067 0x070c0069>;
+ };
+
dmc {
mem-manuf = "samsung";
mem-type = "ddr3";
clock-frequency = <800000000>;
- arm-frequency = <1700000000>;
+ arm-frequency = <900000000>;
};
tmu@10060000 {
diff --git a/arch/arm/dts/s5pc1xx-goni.dts b/arch/arm/dts/s5pc1xx-goni.dts
new file mode 100644
index 0000000..2e671bb
--- /dev/null
+++ b/arch/arm/dts/s5pc1xx-goni.dts
@@ -0,0 +1,28 @@
+/*
+ * Samsung's S5PC110-based Goni board device tree source
+ *
+ * Copyright (c) 2014 Google, Inc
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+/dts-v1/;
+
+#include "skeleton.dtsi"
+
+/ {
+ model = "Samsung Goni based on S5PC110";
+ compatible = "samsung,goni", "samsung,s5pc110";
+
+ aliases {
+ serial2 = "/serial@e2900800";
+ console = "/serial@e2900800";
+ };
+
+ serial@e2900800 {
+ compatible = "samsung,exynos4210-uart";
+ reg = <0xe2900800 0x400>;
+ id = <2>;
+ };
+
+};
diff --git a/arch/arm/dts/s5pc1xx-smdkc100.dts b/arch/arm/dts/s5pc1xx-smdkc100.dts
new file mode 100644
index 0000000..42754ce
--- /dev/null
+++ b/arch/arm/dts/s5pc1xx-smdkc100.dts
@@ -0,0 +1,29 @@
+/*
+ * Samsung's Exynos4210-based SMDKV310 board device tree source
+ *
+ * Copyright (c) 2014 Google, Inc
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+/dts-v1/;
+
+#include "skeleton.dtsi"
+
+/ {
+ model = "Samsung SMDKC100 based on S5PC100";
+ compatible = "samsung,smdkc100", "samsung,s5pc100";
+
+ aliases {
+ serial0 = "/serial@ec000000";
+ console = "/serial@ec000000";
+ };
+
+ serial@ec000000 {
+ compatible = "samsung,exynos4210-uart";
+ reg = <0xec000000 0x100>;
+ interrupts = <0 51 0>;
+ id = <0>;
+ };
+
+};
diff --git a/arch/arm/include/asm/arch-mx31/imx-regs.h b/arch/arm/include/asm/arch-mx31/imx-regs.h
index f23350e..71ebd24 100644
--- a/arch/arm/include/asm/arch-mx31/imx-regs.h
+++ b/arch/arm/include/asm/arch-mx31/imx-regs.h
@@ -909,9 +909,19 @@
#define MXC_CSPIPERIOD_32KHZ (1 << 15)
#define MAX_SPI_BYTES 4
+
#define MXC_SPI_BASE_ADDRESSES \
0x43fa4000, \
0x50010000, \
0x53f84000,
+/*
+ * Generic timer support
+ */
+#ifdef CONFIG_MX31_CLK32
+#define CONFIG_SYS_TIMER_RATE CONFIG_MX31_CLK32
+#else
+#define CONFIG_SYS_TIMER_RATE 32768
+#endif
+
#endif /* __ASM_ARCH_MX31_IMX_REGS_H */
diff --git a/arch/arm/include/asm/arch-mx35/imx-regs.h b/arch/arm/include/asm/arch-mx35/imx-regs.h
index b530029..28a47ed 100644
--- a/arch/arm/include/asm/arch-mx35/imx-regs.h
+++ b/arch/arm/include/asm/arch-mx35/imx-regs.h
@@ -372,4 +372,16 @@
#define CCM_RCSR_NF_16BIT_SEL (1 << 14)
#endif
+
+/*
+ * Generic timer support
+ */
+#ifdef CONFIG_MX35_CLK32
+#define CONFIG_SYS_TIMER_RATE CONFIG_MX35_CLK32
+#else
+#define CONFIG_SYS_TIMER_RATE 32768
+#endif
+
+#define CONFIG_SYS_TIMER_COUNTER (GPT1_BASE_ADDR+36)
+
#endif /* __ASM_ARCH_MX35_H */
diff --git a/arch/arm/include/asm/arch-mx6/clock.h b/arch/arm/include/asm/arch-mx6/clock.h
index c11674f..3c58a0a 100644
--- a/arch/arm/include/asm/arch-mx6/clock.h
+++ b/arch/arm/include/asm/arch-mx6/clock.h
@@ -53,6 +53,7 @@
u32 imx_get_fecclk(void);
unsigned int mxc_get_clock(enum mxc_clock clk);
void setup_gpmi_io_clk(u32 cfg);
+void hab_caam_clock_enable(unsigned char enable);
void enable_ocotp_clk(unsigned char enable);
void enable_usboh3_clk(unsigned char enable);
void enable_uart_clk(unsigned char enable);
diff --git a/arch/arm/include/asm/arch-mx6/hab.h b/arch/arm/include/asm/arch-mx6/hab.h
index 1f12695..c9e5318 100644
--- a/arch/arm/include/asm/arch-mx6/hab.h
+++ b/arch/arm/include/asm/arch-mx6/hab.h
@@ -53,11 +53,17 @@
void **, size_t *, hab_loader_callback_f_t);
typedef void hapi_clock_init_t(void);
-#define HAB_RVT_REPORT_EVENT (*(uint32_t *)0x000000B4)
-#define HAB_RVT_REPORT_STATUS (*(uint32_t *)0x000000B8)
-#define HAB_RVT_AUTHENTICATE_IMAGE (*(uint32_t *)0x000000A4)
-#define HAB_RVT_ENTRY (*(uint32_t *)0x00000098)
-#define HAB_RVT_EXIT (*(uint32_t *)0x0000009C)
+#ifdef CONFIG_MX6SX
+#define HAB_RVT_BASE 0x00000100
+#else
+#define HAB_RVT_BASE 0x00000094
+#endif
+
+#define HAB_RVT_ENTRY (*(uint32_t *)(HAB_RVT_BASE + 0x04))
+#define HAB_RVT_EXIT (*(uint32_t *)(HAB_RVT_BASE + 0x08))
+#define HAB_RVT_AUTHENTICATE_IMAGE (*(uint32_t *)(HAB_RVT_BASE + 0x10))
+#define HAB_RVT_REPORT_EVENT (*(uint32_t *)(HAB_RVT_BASE + 0x20))
+#define HAB_RVT_REPORT_STATUS (*(uint32_t *)(HAB_RVT_BASE + 0x24))
#define HAB_RVT_REPORT_EVENT_NEW (*(uint32_t *)0x000000B8)
#define HAB_RVT_REPORT_STATUS_NEW (*(uint32_t *)0x000000BC)
diff --git a/arch/arm/include/asm/arch-mx6/imx-regs.h b/arch/arm/include/asm/arch-mx6/imx-regs.h
index 22614fc..a159309 100644
--- a/arch/arm/include/asm/arch-mx6/imx-regs.h
+++ b/arch/arm/include/asm/arch-mx6/imx-regs.h
@@ -215,13 +215,8 @@
#define AIPS2_OFF_BASE_ADDR (ATZ2_BASE_ADDR + 0x80000)
#define CAAM_BASE_ADDR (ATZ2_BASE_ADDR)
#define ARM_BASE_ADDR (ATZ2_BASE_ADDR + 0x40000)
-#ifdef CONFIG_MX6SL
-#define USBO2H_PL301_IPS_BASE_ADDR (AIPS2_OFF_BASE_ADDR + 0x0000)
-#define USBO2H_USB_BASE_ADDR (AIPS2_OFF_BASE_ADDR + 0x4000)
-#else
-#define USBOH3_PL301_BASE_ADDR (AIPS2_OFF_BASE_ADDR + 0x0000)
-#define USBOH3_USB_BASE_ADDR (AIPS2_OFF_BASE_ADDR + 0x4000)
-#endif
+#define USB_PL301_BASE_ADDR (AIPS2_OFF_BASE_ADDR + 0x0000)
+#define USB_BASE_ADDR (AIPS2_OFF_BASE_ADDR + 0x4000)
#define ENET_BASE_ADDR (AIPS2_OFF_BASE_ADDR + 0x8000)
#ifdef CONFIG_MX6SL
diff --git a/arch/arm/include/asm/arch-s5pc1xx/periph.h b/arch/arm/include/asm/arch-s5pc1xx/periph.h
new file mode 100644
index 0000000..5c1c3d4
--- /dev/null
+++ b/arch/arm/include/asm/arch-s5pc1xx/periph.h
@@ -0,0 +1,61 @@
+/*
+ * Copyright (C) 2012 Samsung Electronics
+ * Rajeshwari Shinde <rajeshwari.s@samsung.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef __ASM_ARM_ARCH_PERIPH_H
+#define __ASM_ARM_ARCH_PERIPH_H
+
+/*
+ * Peripherals required for pinmux configuration. List will
+ * grow with support for more devices getting added.
+ * Numbering based on interrupt table.
+ *
+ */
+enum periph_id {
+ PERIPH_ID_UART0 = 51,
+ PERIPH_ID_UART1,
+ PERIPH_ID_UART2,
+ PERIPH_ID_UART3,
+ PERIPH_ID_I2C0 = 56,
+ PERIPH_ID_I2C1,
+ PERIPH_ID_I2C2,
+ PERIPH_ID_I2C3,
+ PERIPH_ID_I2C4,
+ PERIPH_ID_I2C5,
+ PERIPH_ID_I2C6,
+ PERIPH_ID_I2C7,
+ PERIPH_ID_SPI0 = 68,
+ PERIPH_ID_SPI1,
+ PERIPH_ID_SPI2,
+ PERIPH_ID_SDMMC0 = 75,
+ PERIPH_ID_SDMMC1,
+ PERIPH_ID_SDMMC2,
+ PERIPH_ID_SDMMC3,
+ PERIPH_ID_I2C8 = 87,
+ PERIPH_ID_I2C9,
+ PERIPH_ID_I2S0 = 98,
+ PERIPH_ID_I2S1 = 99,
+
+ /* Since following peripherals do
+ * not have shared peripheral interrupts (SPIs)
+ * they are numbered arbitiraly after the maximum
+ * SPIs Exynos has (128)
+ */
+ PERIPH_ID_SROMC = 128,
+ PERIPH_ID_SPI3,
+ PERIPH_ID_SPI4,
+ PERIPH_ID_SDMMC4,
+ PERIPH_ID_PWM0,
+ PERIPH_ID_PWM1,
+ PERIPH_ID_PWM2,
+ PERIPH_ID_PWM3,
+ PERIPH_ID_PWM4,
+ PERIPH_ID_I2C10 = 203,
+
+ PERIPH_ID_NONE = -1,
+};
+
+#endif /* __ASM_ARM_ARCH_PERIPH_H */
diff --git a/arch/arm/include/asm/arch-s5pc1xx/pinmux.h b/arch/arm/include/asm/arch-s5pc1xx/pinmux.h
new file mode 100644
index 0000000..0b91ef6
--- /dev/null
+++ b/arch/arm/include/asm/arch-s5pc1xx/pinmux.h
@@ -0,0 +1,50 @@
+/*
+ * Copyright (C) 2012 Samsung Electronics
+ * Abhilash Kesavan <a.kesavan@samsung.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef __ASM_ARM_ARCH_PINMUX_H
+#define __ASM_ARM_ARCH_PINMUX_H
+
+#include "periph.h"
+
+/*
+ * Flags for setting specific configarations of peripherals.
+ * List will grow with support for more devices getting added.
+ */
+enum {
+ PINMUX_FLAG_NONE = 0x00000000,
+
+ /* Flags for eMMC */
+ PINMUX_FLAG_8BIT_MODE = 1 << 0, /* SDMMC 8-bit mode */
+
+ /* Flags for SROM controller */
+ PINMUX_FLAG_BANK = 3 << 0, /* bank number (0-3) */
+ PINMUX_FLAG_16BIT = 1 << 2, /* 16-bit width */
+};
+
+/**
+ * Configures the pinmux for a particular peripheral.
+ *
+ * Each gpio can be configured in many different ways (4 bits on exynos)
+ * such as "input", "output", "special function", "external interrupt"
+ * etc. This function will configure the peripheral pinmux along with
+ * pull-up/down and drive strength.
+ *
+ * @param peripheral peripheral to be configured
+ * @param flags configure flags
+ * @return 0 if ok, -1 on error (e.g. unsupported peripheral)
+ */
+int exynos_pinmux_config(int peripheral, int flags);
+
+/**
+ * Decode the peripheral id using the interrpt numbers.
+ *
+ * @param blob Device tree blob
+ * @param node FDT I2C node to find
+ * @return peripheral id if ok, PERIPH_ID_NONE on error
+ */
+int pinmux_decode_periph_id(const void *blob, int node);
+#endif
diff --git a/board/atmel/sama5d3xek/sama5d3xek.c b/board/atmel/sama5d3xek/sama5d3xek.c
index f53754b..ca4f79d 100644
--- a/board/atmel/sama5d3xek/sama5d3xek.c
+++ b/board/atmel/sama5d3xek/sama5d3xek.c
@@ -17,6 +17,7 @@
#include <lcd.h>
#include <atmel_lcdc.h>
#include <atmel_mci.h>
+#include <phy.h>
#include <micrel.h>
#include <net.h>
#include <netdev.h>
@@ -273,15 +274,25 @@
int board_phy_config(struct phy_device *phydev)
{
- /* rx data delay */
- ksz9021_phy_extended_write(phydev,
- MII_KSZ9021_EXT_RGMII_RX_DATA_SKEW, 0x2222);
- /* tx data delay */
- ksz9021_phy_extended_write(phydev,
- MII_KSZ9021_EXT_RGMII_TX_DATA_SKEW, 0x2222);
- /* rx/tx clock delay */
- ksz9021_phy_extended_write(phydev,
- MII_KSZ9021_EXT_RGMII_CLOCK_SKEW, 0xf2f4);
+ /* board specific timings for GMAC */
+ if (has_gmac()) {
+ /* rx data delay */
+ ksz9021_phy_extended_write(phydev,
+ MII_KSZ9021_EXT_RGMII_RX_DATA_SKEW,
+ 0x2222);
+ /* tx data delay */
+ ksz9021_phy_extended_write(phydev,
+ MII_KSZ9021_EXT_RGMII_TX_DATA_SKEW,
+ 0x2222);
+ /* rx/tx clock delay */
+ ksz9021_phy_extended_write(phydev,
+ MII_KSZ9021_EXT_RGMII_CLOCK_SKEW,
+ 0xf2f4);
+ }
+
+ /* always run the PHY's config routine */
+ if (phydev->drv->config)
+ return phydev->drv->config(phydev);
return 0;
}
diff --git a/board/bachmann/ot1200/Kconfig b/board/bachmann/ot1200/Kconfig
new file mode 100644
index 0000000..55a825d
--- /dev/null
+++ b/board/bachmann/ot1200/Kconfig
@@ -0,0 +1,23 @@
+if TARGET_OT1200
+
+config SYS_CPU
+ string
+ default "armv7"
+
+config SYS_BOARD
+ string
+ default "ot1200"
+
+config SYS_VENDOR
+ string
+ default "bachmann"
+
+config SYS_SOC
+ string
+ default "mx6"
+
+config SYS_CONFIG_NAME
+ string
+ default "ot1200"
+
+endif
diff --git a/board/bachmann/ot1200/MAINTAINERS b/board/bachmann/ot1200/MAINTAINERS
new file mode 100644
index 0000000..ad75c24
--- /dev/null
+++ b/board/bachmann/ot1200/MAINTAINERS
@@ -0,0 +1,6 @@
+BACHMANN ELECTRONIC OT1200 BOARD
+M: Christian Gmeiner <christian.gmeiner@gmail.com>
+S: Maintained
+F: board/bachmann/ot1200
+F: include/configs/ot1200.h
+F: configs/ot1200*_defconfig
diff --git a/board/bachmann/ot1200/Makefile b/board/bachmann/ot1200/Makefile
new file mode 100644
index 0000000..1bd42e8
--- /dev/null
+++ b/board/bachmann/ot1200/Makefile
@@ -0,0 +1,9 @@
+#
+# Copyright (C) 2012-2013, Guennadi Liakhovetski <lg@denx.de>
+# (C) Copyright 2012-2013 Freescale Semiconductor, Inc.
+# Copyright (C) 2013, Boundary Devices <info@boundarydevices.com>
+#
+# SPDX-License-Identifier: GPL-2.0+
+#
+
+obj-y := ot1200.o
diff --git a/board/bachmann/ot1200/README b/board/bachmann/ot1200/README
new file mode 100644
index 0000000..c03d44e
--- /dev/null
+++ b/board/bachmann/ot1200/README
@@ -0,0 +1,20 @@
+U-Boot for the Bachmann electronic GmbH OT1200 devices
+
+There are two different versions of the base board, which differ
+in the way ethernet is done. The variant detection is done during
+runtime based on the address of the found phy.
+
+- "mr" variant
+FEC is connected directly to an ethernet switch (KSZ8895). The ethernet
+port is always up and auto-negotiation is not possible.
+
+- normal variant
+FEC is connected to a normal phy and auto-negotiation is possible.
+
+
+The variant name is part of the dtb file name loaded by u-boot. This
+make is possible to boot the linux kernel and make use variant specific
+devicetree (fixed-phy link).
+
+In order to support different display resoltuions/sizes the OT1200 devices
+are making use of EDID data stored in an i2c EEPROM.
diff --git a/board/freescale/imx/ddr/mx6q_4x_mt41j128.cfg b/board/bachmann/ot1200/mx6q_4x_mt41j128.cfg
similarity index 100%
copy from board/freescale/imx/ddr/mx6q_4x_mt41j128.cfg
copy to board/bachmann/ot1200/mx6q_4x_mt41j128.cfg
diff --git a/board/bachmann/ot1200/ot1200.c b/board/bachmann/ot1200/ot1200.c
new file mode 100644
index 0000000..0d5ede5
--- /dev/null
+++ b/board/bachmann/ot1200/ot1200.c
@@ -0,0 +1,251 @@
+/*
+ * Copyright (C) 2010-2013 Freescale Semiconductor, Inc.
+ * Copyright (C) 2014, Bachmann electronic GmbH
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/imx-regs.h>
+#include <asm/arch/iomux.h>
+#include <malloc.h>
+#include <asm/arch/mx6-pins.h>
+#include <asm/imx-common/iomux-v3.h>
+#include <asm/imx-common/mxc_i2c.h>
+#include <asm/imx-common/boot_mode.h>
+#include <asm/arch/crm_regs.h>
+#include <mmc.h>
+#include <fsl_esdhc.h>
+#include <netdev.h>
+#include <i2c.h>
+#include <pca953x.h>
+#include <asm/gpio.h>
+#include <phy.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#define OUTPUT_40OHM (PAD_CTL_SPEED_MED|PAD_CTL_DSE_40ohm)
+
+#define UART_PAD_CTRL (PAD_CTL_PUS_100K_UP | \
+ OUTPUT_40OHM | PAD_CTL_SRE_FAST | PAD_CTL_HYS)
+
+#define USDHC_PAD_CTRL (PAD_CTL_PUS_47K_UP | \
+ PAD_CTL_SPEED_LOW | PAD_CTL_DSE_80ohm | \
+ PAD_CTL_SRE_FAST | PAD_CTL_HYS)
+
+#define ENET_PAD_CTRL (PAD_CTL_PUS_100K_UP | OUTPUT_40OHM | \
+ PAD_CTL_HYS)
+
+#define SPI_PAD_CTRL (PAD_CTL_HYS | OUTPUT_40OHM | \
+ PAD_CTL_SRE_FAST)
+
+#define I2C_PAD_CTRL (PAD_CTL_PUS_100K_UP | OUTPUT_40OHM | \
+ PAD_CTL_HYS | PAD_CTL_ODE | PAD_CTL_SRE_FAST)
+
+int dram_init(void)
+{
+ gd->ram_size = get_ram_size((void *)PHYS_SDRAM, PHYS_SDRAM_SIZE);
+
+ return 0;
+}
+
+static iomux_v3_cfg_t const uart1_pads[] = {
+ MX6_PAD_CSI0_DAT10__UART1_TX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL),
+ MX6_PAD_CSI0_DAT11__UART1_RX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL),
+};
+
+static void setup_iomux_uart(void)
+{
+ imx_iomux_v3_setup_multiple_pads(uart1_pads, ARRAY_SIZE(uart1_pads));
+}
+
+static iomux_v3_cfg_t const enet_pads[] = {
+ MX6_PAD_KEY_ROW1__ENET_COL | MUX_PAD_CTRL(ENET_PAD_CTRL),
+ MX6_PAD_KEY_COL3__ENET_CRS | MUX_PAD_CTRL(ENET_PAD_CTRL),
+ MX6_PAD_ENET_MDIO__ENET_MDIO | MUX_PAD_CTRL(ENET_PAD_CTRL),
+ MX6_PAD_ENET_MDC__ENET_MDC | MUX_PAD_CTRL(ENET_PAD_CTRL),
+ MX6_PAD_GPIO_16__ENET_REF_CLK | MUX_PAD_CTRL(ENET_PAD_CTRL),
+ MX6_PAD_GPIO_18__ENET_RX_CLK | MUX_PAD_CTRL(ENET_PAD_CTRL),
+ MX6_PAD_ENET_RXD0__ENET_RX_DATA0 | MUX_PAD_CTRL(ENET_PAD_CTRL),
+ MX6_PAD_ENET_RXD1__ENET_RX_DATA1 | MUX_PAD_CTRL(ENET_PAD_CTRL),
+ MX6_PAD_KEY_COL2__ENET_RX_DATA2 | MUX_PAD_CTRL(ENET_PAD_CTRL),
+ MX6_PAD_KEY_COL0__ENET_RX_DATA3 | MUX_PAD_CTRL(ENET_PAD_CTRL),
+ MX6_PAD_ENET_CRS_DV__ENET_RX_EN | MUX_PAD_CTRL(ENET_PAD_CTRL),
+ MX6_PAD_ENET_REF_CLK__ENET_TX_CLK | MUX_PAD_CTRL(ENET_PAD_CTRL),
+ MX6_PAD_ENET_TXD0__ENET_TX_DATA0 | MUX_PAD_CTRL(ENET_PAD_CTRL),
+ MX6_PAD_ENET_TXD1__ENET_TX_DATA1 | MUX_PAD_CTRL(ENET_PAD_CTRL),
+ MX6_PAD_KEY_ROW2__ENET_TX_DATA2 | MUX_PAD_CTRL(ENET_PAD_CTRL),
+ MX6_PAD_KEY_ROW0__ENET_TX_DATA3 | MUX_PAD_CTRL(ENET_PAD_CTRL),
+ MX6_PAD_ENET_TX_EN__ENET_TX_EN | MUX_PAD_CTRL(ENET_PAD_CTRL),
+};
+
+static void setup_iomux_enet(void)
+{
+ imx_iomux_v3_setup_multiple_pads(enet_pads, ARRAY_SIZE(enet_pads));
+}
+
+static iomux_v3_cfg_t const ecspi1_pads[] = {
+ MX6_PAD_DISP0_DAT3__ECSPI3_SS0 | MUX_PAD_CTRL(SPI_PAD_CTRL),
+ MX6_PAD_DISP0_DAT4__ECSPI3_SS1 | MUX_PAD_CTRL(SPI_PAD_CTRL),
+ MX6_PAD_DISP0_DAT2__ECSPI3_MISO | MUX_PAD_CTRL(SPI_PAD_CTRL),
+ MX6_PAD_DISP0_DAT1__ECSPI3_MOSI | MUX_PAD_CTRL(SPI_PAD_CTRL),
+ MX6_PAD_DISP0_DAT0__ECSPI3_SCLK | MUX_PAD_CTRL(SPI_PAD_CTRL),
+};
+
+static void setup_iomux_spi(void)
+{
+ imx_iomux_v3_setup_multiple_pads(ecspi1_pads, ARRAY_SIZE(ecspi1_pads));
+}
+
+int board_early_init_f(void)
+{
+ setup_iomux_uart();
+ setup_iomux_spi();
+
+ return 0;
+}
+
+static iomux_v3_cfg_t const usdhc3_pads[] = {
+ MX6_PAD_SD3_CLK__SD3_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ MX6_PAD_SD3_CMD__SD3_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ MX6_PAD_SD3_DAT0__SD3_DATA0 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ MX6_PAD_SD3_DAT1__SD3_DATA1 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ MX6_PAD_SD3_DAT2__SD3_DATA2 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ MX6_PAD_SD3_DAT3__SD3_DATA3 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ MX6_PAD_SD3_DAT4__SD3_DATA4 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ MX6_PAD_SD3_DAT5__SD3_DATA5 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ MX6_PAD_SD3_DAT6__SD3_DATA6 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ MX6_PAD_SD3_DAT7__SD3_DATA7 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ MX6_PAD_SD3_RST__SD3_RESET | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+};
+
+int board_mmc_getcd(struct mmc *mmc)
+{
+ return 1;
+}
+
+struct fsl_esdhc_cfg usdhc_cfg[] = {
+ {USDHC3_BASE_ADDR},
+};
+
+int board_mmc_init(bd_t *bis)
+{
+ usdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC3_CLK);
+ usdhc_cfg[0].max_bus_width = 8;
+
+ imx_iomux_v3_setup_multiple_pads(usdhc3_pads, ARRAY_SIZE(usdhc3_pads));
+
+ return fsl_esdhc_initialize(bis, &usdhc_cfg[0]);
+}
+
+#define PC MUX_PAD_CTRL(I2C_PAD_CTRL)
+
+/* I2C3 - IO expander */
+static struct i2c_pads_info i2c_pad_info2 = {
+ .scl = {
+ .i2c_mode = MX6_PAD_EIM_D17__I2C3_SCL | PC,
+ .gpio_mode = MX6_PAD_EIM_D17__GPIO3_IO17 | PC,
+ .gp = IMX_GPIO_NR(3, 17)
+ },
+ .sda = {
+ .i2c_mode = MX6_PAD_EIM_D18__I2C3_SDA | PC,
+ .gpio_mode = MX6_PAD_EIM_D18__GPIO3_IO18 | PC,
+ .gp = IMX_GPIO_NR(3, 18)
+ }
+};
+
+static iomux_v3_cfg_t const pwm_pad[] = {
+ MX6_PAD_SD1_CMD__PWM4_OUT | MUX_PAD_CTRL(OUTPUT_40OHM),
+};
+
+static void leds_on(void)
+{
+ /* turn on all possible leds connected via GPIO expander */
+ i2c_set_bus_num(2);
+ pca953x_set_dir(CONFIG_SYS_I2C_PCA953X_ADDR, 0xffff, PCA953X_DIR_OUT);
+ pca953x_set_val(CONFIG_SYS_I2C_PCA953X_ADDR, 0xffff, 0x0);
+}
+
+static void backlight_lcd_off(void)
+{
+ unsigned gpio = IMX_GPIO_NR(2, 0);
+ gpio_direction_output(gpio, 0);
+
+ gpio = IMX_GPIO_NR(2, 3);
+ gpio_direction_output(gpio, 0);
+}
+
+int board_eth_init(bd_t *bis)
+{
+ uint32_t base = IMX_FEC_BASE;
+ struct mii_dev *bus = NULL;
+ struct phy_device *phydev = NULL;
+ int ret;
+
+ setup_iomux_enet();
+
+ bus = fec_get_miibus(base, -1);
+ if (!bus)
+ return 0;
+
+ /* scan phy 0 and 5 */
+ phydev = phy_find_by_mask(bus, 0x21, PHY_INTERFACE_MODE_RGMII);
+ if (!phydev) {
+ free(bus);
+ return 0;
+ }
+
+ /* depending on the phy address we can detect our board version */
+ if (phydev->addr == 0)
+ setenv("boardver", "");
+ else
+ setenv("boardver", "mr");
+
+ printf("using phy at %d\n", phydev->addr);
+ ret = fec_probe(bis, -1, base, bus, phydev);
+ if (ret) {
+ printf("FEC MXC: %s:failed\n", __func__);
+ free(phydev);
+ free(bus);
+ }
+ return 0;
+}
+
+int board_init(void)
+{
+ gd->bd->bi_boot_params = PHYS_SDRAM + 0x100;
+
+ backlight_lcd_off();
+
+ setup_i2c(2, CONFIG_SYS_I2C_SPEED, 0x7f, &i2c_pad_info2);
+
+ leds_on();
+
+ /* enable ecspi3 clocks */
+ enable_cspi_clock(1, 2);
+
+ return 0;
+}
+
+int checkboard(void)
+{
+ puts("Board: "CONFIG_SYS_BOARD"\n");
+ return 0;
+}
+
+#ifdef CONFIG_CMD_BMODE
+static const struct boot_mode board_boot_modes[] = {
+ /* 4 bit bus width */
+ {"mmc0", MAKE_CFGVAL(0x40, 0x30, 0x00, 0x00)},
+ {NULL, 0},
+};
+#endif
+
+int misc_init_r(void)
+{
+#ifdef CONFIG_CMD_BMODE
+ add_board_boot_modes(board_boot_modes);
+#endif
+ return 0;
+}
diff --git a/board/boundary/nitrogen6x/1066mhz_4x256mx16.cfg b/board/boundary/nitrogen6x/1066mhz_4x256mx16.cfg
index bb5716e..1096f77 100644
--- a/board/boundary/nitrogen6x/1066mhz_4x256mx16.cfg
+++ b/board/boundary/nitrogen6x/1066mhz_4x256mx16.cfg
@@ -24,18 +24,18 @@
DATA 4, MX6_MMDC_P0_MDREF, 0x00007800
DATA 4, MX6_MMDC_P0_MPODTCTRL, 0x00022227
DATA 4, MX6_MMDC_P1_MPODTCTRL, 0x00022227
-DATA 4, MX6_MMDC_P0_MPDGCTRL0, 0x43040319
-DATA 4, MX6_MMDC_P0_MPDGCTRL1, 0x03040279
-DATA 4, MX6_MMDC_P1_MPDGCTRL0, 0x43040321
-DATA 4, MX6_MMDC_P1_MPDGCTRL1, 0x03030251
-DATA 4, MX6_MMDC_P0_MPRDDLCTL, 0x4d434248
-DATA 4, MX6_MMDC_P1_MPRDDLCTL, 0x42413c4d
-DATA 4, MX6_MMDC_P0_MPWRDLCTL, 0x34424543
-DATA 4, MX6_MMDC_P1_MPWRDLCTL, 0x49324933
-DATA 4, MX6_MMDC_P0_MPWLDECTRL0, 0x001a0017
-DATA 4, MX6_MMDC_P0_MPWLDECTRL1, 0x001F001F
-DATA 4, MX6_MMDC_P1_MPWLDECTRL0, 0x00170027
-DATA 4, MX6_MMDC_P1_MPWLDECTRL1, 0x000a001f
+DATA 4, MX6_MMDC_P0_MPDGCTRL0, 0x42740304
+DATA 4, MX6_MMDC_P0_MPDGCTRL1, 0x026e0265
+DATA 4, MX6_MMDC_P1_MPDGCTRL0, 0x02750306
+DATA 4, MX6_MMDC_P1_MPDGCTRL1, 0x02720244
+DATA 4, MX6_MMDC_P0_MPRDDLCTL, 0x463d4041
+DATA 4, MX6_MMDC_P1_MPRDDLCTL, 0x42413c47
+DATA 4, MX6_MMDC_P0_MPWRDLCTL, 0x37414441
+DATA 4, MX6_MMDC_P1_MPWRDLCTL, 0x4633473b
+DATA 4, MX6_MMDC_P0_MPWLDECTRL0, 0x0025001f
+DATA 4, MX6_MMDC_P0_MPWLDECTRL1, 0x00290027
+DATA 4, MX6_MMDC_P1_MPWLDECTRL0, 0x001f002b
+DATA 4, MX6_MMDC_P1_MPWLDECTRL1, 0x000f0029
DATA 4, MX6_MMDC_P0_MPMUR0, 0x00000800
DATA 4, MX6_MMDC_P1_MPMUR0, 0x00000800
DATA 4, MX6_MMDC_P0_MDSCR, 0x00000000
diff --git a/board/boundary/nitrogen6x/nitrogen6x.c b/board/boundary/nitrogen6x/nitrogen6x.c
index 7edfe19..951b820 100644
--- a/board/boundary/nitrogen6x/nitrogen6x.c
+++ b/board/boundary/nitrogen6x/nitrogen6x.c
@@ -28,6 +28,9 @@
#include <asm/arch/crm_regs.h>
#include <asm/arch/mxc_hdmi.h>
#include <i2c.h>
+#include <input.h>
+#include <netdev.h>
+#include <usb/ehci-fsl.h>
DECLARE_GLOBAL_DATA_PTR;
#define GP_USB_OTG_PWR IMX_GPIO_NR(3, 22)
@@ -70,12 +73,12 @@
return 0;
}
-iomux_v3_cfg_t const uart1_pads[] = {
+static iomux_v3_cfg_t const uart1_pads[] = {
MX6_PAD_SD3_DAT6__UART1_RX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL),
MX6_PAD_SD3_DAT7__UART1_TX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL),
};
-iomux_v3_cfg_t const uart2_pads[] = {
+static iomux_v3_cfg_t const uart2_pads[] = {
MX6_PAD_EIM_D26__UART2_TX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL),
MX6_PAD_EIM_D27__UART2_RX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL),
};
@@ -83,7 +86,7 @@
#define PC MUX_PAD_CTRL(I2C_PAD_CTRL)
/* I2C1, SGTL5000 */
-struct i2c_pads_info i2c_pad_info0 = {
+static struct i2c_pads_info i2c_pad_info0 = {
.scl = {
.i2c_mode = MX6_PAD_EIM_D21__I2C1_SCL | PC,
.gpio_mode = MX6_PAD_EIM_D21__GPIO3_IO21 | PC,
@@ -97,7 +100,7 @@
};
/* I2C2 Camera, MIPI */
-struct i2c_pads_info i2c_pad_info1 = {
+static struct i2c_pads_info i2c_pad_info1 = {
.scl = {
.i2c_mode = MX6_PAD_KEY_COL3__I2C2_SCL | PC,
.gpio_mode = MX6_PAD_KEY_COL3__GPIO4_IO12 | PC,
@@ -111,7 +114,7 @@
};
/* I2C3, J15 - RGB connector */
-struct i2c_pads_info i2c_pad_info2 = {
+static struct i2c_pads_info i2c_pad_info2 = {
.scl = {
.i2c_mode = MX6_PAD_GPIO_5__I2C3_SCL | PC,
.gpio_mode = MX6_PAD_GPIO_5__GPIO1_IO05 | PC,
@@ -124,7 +127,16 @@
}
};
-iomux_v3_cfg_t const usdhc3_pads[] = {
+static iomux_v3_cfg_t const usdhc2_pads[] = {
+ MX6_PAD_SD2_CLK__SD2_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ MX6_PAD_SD2_CMD__SD2_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ MX6_PAD_SD2_DAT0__SD2_DATA0 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ MX6_PAD_SD2_DAT1__SD2_DATA1 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ MX6_PAD_SD2_DAT2__SD2_DATA2 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ MX6_PAD_SD2_DAT3__SD2_DATA3 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+};
+
+static iomux_v3_cfg_t const usdhc3_pads[] = {
MX6_PAD_SD3_CLK__SD3_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL),
MX6_PAD_SD3_CMD__SD3_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL),
MX6_PAD_SD3_DAT0__SD3_DATA0 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
@@ -134,7 +146,7 @@
MX6_PAD_SD3_DAT5__GPIO7_IO00 | MUX_PAD_CTRL(NO_PAD_CTRL), /* CD */
};
-iomux_v3_cfg_t const usdhc4_pads[] = {
+static iomux_v3_cfg_t const usdhc4_pads[] = {
MX6_PAD_SD4_CLK__SD4_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL),
MX6_PAD_SD4_CMD__SD4_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL),
MX6_PAD_SD4_DAT0__SD4_DATA0 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
@@ -144,7 +156,7 @@
MX6_PAD_NANDF_D6__GPIO2_IO06 | MUX_PAD_CTRL(NO_PAD_CTRL), /* CD */
};
-iomux_v3_cfg_t const enet_pads1[] = {
+static iomux_v3_cfg_t const enet_pads1[] = {
MX6_PAD_ENET_MDIO__ENET_MDIO | MUX_PAD_CTRL(ENET_PAD_CTRL),
MX6_PAD_ENET_MDC__ENET_MDC | MUX_PAD_CTRL(ENET_PAD_CTRL),
MX6_PAD_RGMII_TXC__RGMII_TXC | MUX_PAD_CTRL(ENET_PAD_CTRL),
@@ -171,7 +183,7 @@
MX6_PAD_ENET_RXD0__GPIO1_IO27 | MUX_PAD_CTRL(NO_PAD_CTRL),
};
-iomux_v3_cfg_t const enet_pads2[] = {
+static iomux_v3_cfg_t const enet_pads2[] = {
MX6_PAD_RGMII_RXC__RGMII_RXC | MUX_PAD_CTRL(ENET_PAD_CTRL),
MX6_PAD_RGMII_RD0__RGMII_RD0 | MUX_PAD_CTRL(ENET_PAD_CTRL),
MX6_PAD_RGMII_RD1__RGMII_RD1 | MUX_PAD_CTRL(ENET_PAD_CTRL),
@@ -189,7 +201,7 @@
};
/* wl1271 pads on nitrogen6x */
-iomux_v3_cfg_t const wl12xx_pads[] = {
+static iomux_v3_cfg_t const wl12xx_pads[] = {
(MX6_PAD_NANDF_CS1__GPIO6_IO14 & ~MUX_PAD_CTRL_MASK)
| MUX_PAD_CTRL(WEAK_PULLDOWN),
(MX6_PAD_NANDF_CS2__GPIO6_IO15 & ~MUX_PAD_CTRL_MASK)
@@ -235,9 +247,10 @@
gpio_set_value(IMX_GPIO_NR(1, 27), 1); /* Nitrogen6X PHY reset */
imx_iomux_v3_setup_multiple_pads(enet_pads2, ARRAY_SIZE(enet_pads2));
+ udelay(100); /* Wait 100 us before using mii interface */
}
-iomux_v3_cfg_t const usb_pads[] = {
+static iomux_v3_cfg_t const usb_pads[] = {
MX6_PAD_GPIO_17__GPIO7_IO12 | MUX_PAD_CTRL(NO_PAD_CTRL),
};
@@ -271,7 +284,7 @@
#endif
#ifdef CONFIG_FSL_ESDHC
-struct fsl_esdhc_cfg usdhc_cfg[2] = {
+static struct fsl_esdhc_cfg usdhc_cfg[2] = {
{USDHC3_BASE_ADDR},
{USDHC4_BASE_ADDR},
};
@@ -279,17 +292,11 @@
int board_mmc_getcd(struct mmc *mmc)
{
struct fsl_esdhc_cfg *cfg = (struct fsl_esdhc_cfg *)mmc->priv;
- int ret;
+ int gp_cd = (cfg->esdhc_base == USDHC3_BASE_ADDR) ? IMX_GPIO_NR(7, 0) :
+ IMX_GPIO_NR(2, 6);
- if (cfg->esdhc_base == USDHC3_BASE_ADDR) {
- gpio_direction_input(IMX_GPIO_NR(7, 0));
- ret = !gpio_get_value(IMX_GPIO_NR(7, 0));
- } else {
- gpio_direction_input(IMX_GPIO_NR(2, 6));
- ret = !gpio_get_value(IMX_GPIO_NR(2, 6));
- }
-
- return ret;
+ gpio_direction_input(gp_cd);
+ return !gpio_get_value(gp_cd);
}
int board_mmc_init(bd_t *bis)
@@ -333,7 +340,7 @@
return (bus == 0 && cs == 0) ? (IMX_GPIO_NR(3, 19)) : -1;
}
-iomux_v3_cfg_t const ecspi1_pads[] = {
+static iomux_v3_cfg_t const ecspi1_pads[] = {
/* SS1 */
MX6_PAD_EIM_D19__GPIO3_IO19 | MUX_PAD_CTRL(NO_PAD_CTRL),
MX6_PAD_EIM_D17__ECSPI1_MISO | MUX_PAD_CTRL(SPI_PAD_CTRL),
@@ -341,7 +348,7 @@
MX6_PAD_EIM_D16__ECSPI1_SCLK | MUX_PAD_CTRL(SPI_PAD_CTRL),
};
-void setup_spi(void)
+static void setup_spi(void)
{
imx_iomux_v3_setup_multiple_pads(ecspi1_pads,
ARRAY_SIZE(ecspi1_pads));
@@ -472,6 +479,17 @@
gpio_direction_output(LVDS_BACKLIGHT_GP, 1);
}
+static void enable_lvds_jeida(struct display_info_t const *dev)
+{
+ struct iomuxc *iomux = (struct iomuxc *)
+ IOMUXC_BASE_ADDR;
+ u32 reg = readl(&iomux->gpr[2]);
+ reg |= IOMUXC_GPR2_DATA_WIDTH_CH0_24BIT
+ |IOMUXC_GPR2_BIT_MAPPING_CH0_JEIDA;
+ writel(reg, &iomux->gpr[2]);
+ gpio_direction_output(LVDS_BACKLIGHT_GP, 1);
+}
+
static void enable_rgb(struct display_info_t const *dev)
{
imx_iomux_v3_setup_multiple_pads(
@@ -481,10 +499,10 @@
}
struct display_info_t const displays[] = {{
- .bus = -1,
- .addr = 0,
+ .bus = 1,
+ .addr = 0x50,
.pixfmt = IPU_PIX_FMT_RGB24,
- .detect = detect_hdmi,
+ .detect = detect_i2c,
.enable = do_enable_hdmi,
.mode = {
.name = "HDMI",
@@ -501,6 +519,46 @@
.sync = FB_SYNC_EXT,
.vmode = FB_VMODE_NONINTERLACED
} }, {
+ .bus = 0,
+ .addr = 0,
+ .pixfmt = IPU_PIX_FMT_RGB24,
+ .detect = NULL,
+ .enable = enable_lvds_jeida,
+ .mode = {
+ .name = "LDB-WXGA",
+ .refresh = 60,
+ .xres = 1280,
+ .yres = 800,
+ .pixclock = 14065,
+ .left_margin = 40,
+ .right_margin = 40,
+ .upper_margin = 3,
+ .lower_margin = 80,
+ .hsync_len = 10,
+ .vsync_len = 10,
+ .sync = FB_SYNC_EXT,
+ .vmode = FB_VMODE_NONINTERLACED
+} }, {
+ .bus = 0,
+ .addr = 0,
+ .pixfmt = IPU_PIX_FMT_RGB24,
+ .detect = NULL,
+ .enable = enable_lvds,
+ .mode = {
+ .name = "LDB-WXGA-S",
+ .refresh = 60,
+ .xres = 1280,
+ .yres = 800,
+ .pixclock = 14065,
+ .left_margin = 40,
+ .right_margin = 40,
+ .upper_margin = 3,
+ .lower_margin = 80,
+ .hsync_len = 10,
+ .vsync_len = 10,
+ .sync = FB_SYNC_EXT,
+ .vmode = FB_VMODE_NONINTERLACED
+} }, {
.bus = 2,
.addr = 0x4,
.pixfmt = IPU_PIX_FMT_LVDS666,
@@ -521,6 +579,26 @@
.sync = FB_SYNC_EXT,
.vmode = FB_VMODE_NONINTERLACED
} }, {
+ .bus = 0,
+ .addr = 0,
+ .pixfmt = IPU_PIX_FMT_LVDS666,
+ .detect = NULL,
+ .enable = enable_lvds,
+ .mode = {
+ .name = "LG-9.7",
+ .refresh = 60,
+ .xres = 1024,
+ .yres = 768,
+ .pixclock = 15385, /* ~65MHz */
+ .left_margin = 480,
+ .right_margin = 260,
+ .upper_margin = 16,
+ .lower_margin = 6,
+ .hsync_len = 250,
+ .vsync_len = 10,
+ .sync = FB_SYNC_EXT,
+ .vmode = FB_VMODE_NONINTERLACED
+} }, {
.bus = 2,
.addr = 0x38,
.pixfmt = IPU_PIX_FMT_LVDS666,
@@ -542,6 +620,86 @@
.vmode = FB_VMODE_NONINTERLACED
} }, {
.bus = 2,
+ .addr = 0x10,
+ .pixfmt = IPU_PIX_FMT_RGB666,
+ .detect = detect_i2c,
+ .enable = enable_rgb,
+ .mode = {
+ .name = "fusion7",
+ .refresh = 60,
+ .xres = 800,
+ .yres = 480,
+ .pixclock = 33898,
+ .left_margin = 96,
+ .right_margin = 24,
+ .upper_margin = 3,
+ .lower_margin = 10,
+ .hsync_len = 72,
+ .vsync_len = 7,
+ .sync = 0x40000002,
+ .vmode = FB_VMODE_NONINTERLACED
+} }, {
+ .bus = 0,
+ .addr = 0,
+ .pixfmt = IPU_PIX_FMT_RGB666,
+ .detect = NULL,
+ .enable = enable_rgb,
+ .mode = {
+ .name = "svga",
+ .refresh = 60,
+ .xres = 800,
+ .yres = 600,
+ .pixclock = 15385,
+ .left_margin = 220,
+ .right_margin = 40,
+ .upper_margin = 21,
+ .lower_margin = 7,
+ .hsync_len = 60,
+ .vsync_len = 10,
+ .sync = 0,
+ .vmode = FB_VMODE_NONINTERLACED
+} }, {
+ .bus = 2,
+ .addr = 0x41,
+ .pixfmt = IPU_PIX_FMT_LVDS666,
+ .detect = detect_i2c,
+ .enable = enable_lvds,
+ .mode = {
+ .name = "amp1024x600",
+ .refresh = 60,
+ .xres = 1024,
+ .yres = 600,
+ .pixclock = 15385,
+ .left_margin = 220,
+ .right_margin = 40,
+ .upper_margin = 21,
+ .lower_margin = 7,
+ .hsync_len = 60,
+ .vsync_len = 10,
+ .sync = FB_SYNC_EXT,
+ .vmode = FB_VMODE_NONINTERLACED
+} }, {
+ .bus = 0,
+ .addr = 0,
+ .pixfmt = IPU_PIX_FMT_LVDS666,
+ .detect = 0,
+ .enable = enable_lvds,
+ .mode = {
+ .name = "wvga-lvds",
+ .refresh = 57,
+ .xres = 800,
+ .yres = 480,
+ .pixclock = 15385,
+ .left_margin = 220,
+ .right_margin = 40,
+ .upper_margin = 21,
+ .lower_margin = 7,
+ .hsync_len = 60,
+ .vsync_len = 10,
+ .sync = FB_SYNC_EXT,
+ .vmode = FB_VMODE_NONINTERLACED
+} }, {
+ .bus = 2,
.addr = 0x48,
.pixfmt = IPU_PIX_FMT_RGB666,
.detect = detect_i2c,
@@ -560,9 +718,34 @@
.vsync_len = 10,
.sync = 0,
.vmode = FB_VMODE_NONINTERLACED
+} }, {
+ .bus = 0,
+ .addr = 0,
+ .pixfmt = IPU_PIX_FMT_RGB24,
+ .detect = NULL,
+ .enable = enable_rgb,
+ .mode = {
+ .name = "qvga",
+ .refresh = 60,
+ .xres = 320,
+ .yres = 240,
+ .pixclock = 37037,
+ .left_margin = 38,
+ .right_margin = 37,
+ .upper_margin = 16,
+ .lower_margin = 15,
+ .hsync_len = 30,
+ .vsync_len = 3,
+ .sync = 0,
+ .vmode = FB_VMODE_NONINTERLACED
} } };
size_t display_count = ARRAY_SIZE(displays);
+int board_cfb_skip(void)
+{
+ return NULL != getenv("novideo");
+}
+
static void setup_display(void)
{
struct mxc_ccm_reg *mxc_ccm = (struct mxc_ccm_reg *)CCM_BASE_ADDR;
@@ -619,17 +802,62 @@
}
#endif
+static iomux_v3_cfg_t const init_pads[] = {
+ /* SGTL5000 sys_mclk */
+ NEW_PAD_CTRL(MX6_PAD_GPIO_0__CCM_CLKO1, OUTPUT_40OHM),
+
+ /* J5 - Camera MCLK */
+ NEW_PAD_CTRL(MX6_PAD_GPIO_3__CCM_CLKO2, OUTPUT_40OHM),
+
+ /* wl1271 pads on nitrogen6x */
+ /* WL12XX_WL_IRQ_GP */
+ NEW_PAD_CTRL(MX6_PAD_NANDF_CS1__GPIO6_IO14, WEAK_PULLDOWN),
+ /* WL12XX_WL_ENABLE_GP */
+ NEW_PAD_CTRL(MX6_PAD_NANDF_CS2__GPIO6_IO15, OUTPUT_40OHM),
+ /* WL12XX_BT_ENABLE_GP */
+ NEW_PAD_CTRL(MX6_PAD_NANDF_CS3__GPIO6_IO16, OUTPUT_40OHM),
+ /* USB otg power */
+ NEW_PAD_CTRL(MX6_PAD_EIM_D22__GPIO3_IO22, OUTPUT_40OHM),
+ NEW_PAD_CTRL(MX6_PAD_NANDF_D5__GPIO2_IO05, OUTPUT_40OHM),
+ NEW_PAD_CTRL(MX6_PAD_NANDF_WP_B__GPIO6_IO09, OUTPUT_40OHM),
+ NEW_PAD_CTRL(MX6_PAD_GPIO_8__GPIO1_IO08, OUTPUT_40OHM),
+ NEW_PAD_CTRL(MX6_PAD_GPIO_6__GPIO1_IO06, OUTPUT_40OHM),
+};
+
+#define WL12XX_WL_IRQ_GP IMX_GPIO_NR(6, 14)
+
+static unsigned gpios_out_low[] = {
+ /* Disable wl1271 */
+ IMX_GPIO_NR(6, 15), /* disable wireless */
+ IMX_GPIO_NR(6, 16), /* disable bluetooth */
+ IMX_GPIO_NR(3, 22), /* disable USB otg power */
+ IMX_GPIO_NR(2, 5), /* ov5640 mipi camera reset */
+ IMX_GPIO_NR(1, 8), /* ov5642 reset */
+};
+
+static unsigned gpios_out_high[] = {
+ IMX_GPIO_NR(1, 6), /* ov5642 powerdown */
+ IMX_GPIO_NR(6, 9), /* ov5640 mipi camera power down */
+};
+
+static void set_gpios(unsigned *p, int cnt, int val)
+{
+ int i;
+
+ for (i = 0; i < cnt; i++)
+ gpio_direction_output(*p++, val);
+}
+
int board_early_init_f(void)
{
setup_iomux_uart();
- /* Disable wl1271 For Nitrogen6w */
+ set_gpios(gpios_out_high, ARRAY_SIZE(gpios_out_high), 1);
+ set_gpios(gpios_out_low, ARRAY_SIZE(gpios_out_low), 0);
gpio_direction_input(WL12XX_WL_IRQ_GP);
- gpio_direction_output(WL12XX_WL_ENABLE_GP, 0);
- gpio_direction_output(WL12XX_BT_ENABLE_GP, 0);
- gpio_direction_output(GP_USB_OTG_PWR, 0); /* OTG power off */
imx_iomux_v3_setup_multiple_pads(wl12xx_pads, ARRAY_SIZE(wl12xx_pads));
+ imx_iomux_v3_setup_multiple_pads(init_pads, ARRAY_SIZE(init_pads));
setup_buttons();
#if defined(CONFIG_VIDEO_IPUV3)
@@ -663,6 +891,8 @@
#ifdef CONFIG_MXC_SPI
setup_spi();
#endif
+ imx_iomux_v3_setup_multiple_pads(
+ usdhc2_pads, ARRAY_SIZE(usdhc2_pads));
setup_i2c(0, CONFIG_SYS_I2C_SPEED, 0x7f, &i2c_pad_info0);
setup_i2c(1, CONFIG_SYS_I2C_SPEED, 0x7f, &i2c_pad_info1);
setup_i2c(2, CONFIG_SYS_I2C_SPEED, 0x7f, &i2c_pad_info2);
diff --git a/board/compulab/common/eeprom.c b/board/compulab/common/eeprom.c
index 85442cd..2df3ada 100644
--- a/board/compulab/common/eeprom.c
+++ b/board/compulab/common/eeprom.c
@@ -15,6 +15,10 @@
# define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1
#endif
+#ifndef CONFIG_SYS_I2C_EEPROM_BUS
+#define CONFIG_SYS_I2C_EEPROM_BUS 0
+#endif
+
#define EEPROM_LAYOUT_VER_OFFSET 44
#define BOARD_SERIAL_OFFSET 20
#define BOARD_SERIAL_OFFSET_LEGACY 8
diff --git a/board/freescale/imx/ddr/mx6q_4x_mt41j128.cfg b/board/congatec/cgtqmx6eval/imximage.cfg
similarity index 100%
copy from board/freescale/imx/ddr/mx6q_4x_mt41j128.cfg
copy to board/congatec/cgtqmx6eval/imximage.cfg
diff --git a/board/freescale/mx6qarm2/MAINTAINERS b/board/freescale/mx6qarm2/MAINTAINERS
index 42c19d1..52cf7f9 100644
--- a/board/freescale/mx6qarm2/MAINTAINERS
+++ b/board/freescale/mx6qarm2/MAINTAINERS
@@ -1,6 +1,10 @@
MX6QARM2 BOARD
M: Jason Liu <r64343@freescale.com>
+M: Ye Li <b37916@freescale.com>
S: Maintained
F: board/freescale/mx6qarm2/
F: include/configs/mx6qarm2.h
F: configs/mx6qarm2_defconfig
+F: configs/mx6dlarm2_defconfig
+F: configs/mx6qarm2_lpddr2_defconfig
+F: configs/mx6dlarm2_lpddr2_defconfig
diff --git a/board/freescale/mx6qarm2/imximage.cfg b/board/freescale/mx6qarm2/imximage.cfg
index 710f34d..c85bde5 100644
--- a/board/freescale/mx6qarm2/imximage.cfg
+++ b/board/freescale/mx6qarm2/imximage.cfg
@@ -1,5 +1,5 @@
/*
- * Copyright (C) 2011 Freescale Semiconductor, Inc.
+ * Copyright (C) 2011-2014 Freescale Semiconductor, Inc.
* Jason Liu <r64343@freescale.com>
*
* SPDX-License-Identifier: GPL-2.0+
@@ -30,6 +30,185 @@
* Address absolute address of the register
* value value to be stored in the register
*/
+#ifdef CONFIG_MX6DQ_LPDDR2
+/* DCD */
+DATA 4 0x020C4018 0x60324
+
+DATA 4 0x020E05a8 0x00003038
+DATA 4 0x020E05b0 0x00003038
+DATA 4 0x020E0524 0x00003038
+DATA 4 0x020E051c 0x00003038
+
+DATA 4 0x020E0518 0x00003038
+DATA 4 0x020E050c 0x00003038
+DATA 4 0x020E05b8 0x00003038
+DATA 4 0x020E05c0 0x00003038
+
+DATA 4 0x020E05ac 0x00000038
+DATA 4 0x020E05b4 0x00000038
+DATA 4 0x020E0528 0x00000038
+DATA 4 0x020E0520 0x00000038
+
+DATA 4 0x020E0514 0x00000038
+DATA 4 0x020E0510 0x00000038
+DATA 4 0x020E05bc 0x00000038
+DATA 4 0x020E05c4 0x00000038
+
+DATA 4 0x020E056c 0x00000038
+DATA 4 0x020E0578 0x00000038
+DATA 4 0x020E0588 0x00000038
+DATA 4 0x020E0594 0x00000038
+
+DATA 4 0x020E057c 0x00000038
+DATA 4 0x020E0590 0x00000038
+DATA 4 0x020E0598 0x00000038
+DATA 4 0x020E058c 0x00000000
+
+DATA 4 0x020E059c 0x00000038
+DATA 4 0x020E05a0 0x00000038
+DATA 4 0x020E0784 0x00000038
+DATA 4 0x020E0788 0x00000038
+
+DATA 4 0x020E0794 0x00000038
+DATA 4 0x020E079c 0x00000038
+DATA 4 0x020E07a0 0x00000038
+DATA 4 0x020E07a4 0x00000038
+
+DATA 4 0x020E07a8 0x00000038
+DATA 4 0x020E0748 0x00000038
+DATA 4 0x020E074c 0x00000038
+DATA 4 0x020E0750 0x00020000
+
+DATA 4 0x020E0758 0x00000000
+DATA 4 0x020E0774 0x00020000
+DATA 4 0x020E078c 0x00000038
+DATA 4 0x020E0798 0x00080000
+
+DATA 4 0x021b001c 0x00008000
+DATA 4 0x021b401c 0x00008000
+
+DATA 4 0x021b085c 0x1b5f01ff
+DATA 4 0x021b485c 0x1b5f01ff
+
+DATA 4 0x021b0800 0xa1390000
+DATA 4 0x021b4800 0xa1390000
+
+DATA 4 0x021b0890 0x00400000
+DATA 4 0x021b4890 0x00400000
+
+DATA 4 0x021b48bc 0x00055555
+
+DATA 4 0x021b08b8 0x00000800
+DATA 4 0x021b48b8 0x00000800
+
+DATA 4 0x021b081c 0x33333333
+DATA 4 0x021b0820 0x33333333
+DATA 4 0x021b0824 0x33333333
+DATA 4 0x021b0828 0x33333333
+DATA 4 0x021b481c 0x33333333
+DATA 4 0x021b4820 0x33333333
+DATA 4 0x021b4824 0x33333333
+DATA 4 0x021b4828 0x33333333
+
+DATA 4 0x021b082c 0xf3333333
+DATA 4 0x021b0830 0xf3333333
+DATA 4 0x021b0834 0xf3333333
+DATA 4 0x021b0838 0xf3333333
+DATA 4 0x021b482c 0xf3333333
+DATA 4 0x021b4830 0xf3333333
+DATA 4 0x021b4834 0xf3333333
+DATA 4 0x021b4838 0xf3333333
+
+DATA 4 0x021b0848 0x49383b39
+DATA 4 0x021b0850 0x30364738
+DATA 4 0x021b4848 0x3e3c3846
+DATA 4 0x021b4850 0x4c294b35
+
+DATA 4 0x021b083c 0x20000000
+DATA 4 0x021b0840 0x0
+DATA 4 0x021b483c 0x20000000
+DATA 4 0x021b4840 0x0
+
+DATA 4 0x021b0858 0xf00
+DATA 4 0x021b4858 0xf00
+
+DATA 4 0x021b08b8 0x800
+DATA 4 0x021b48b8 0x800
+
+DATA 4 0x021b000c 0x555a61a5
+DATA 4 0x021b0004 0x20036
+DATA 4 0x021b0010 0x160e83
+DATA 4 0x021b0014 0xdd
+DATA 4 0x021b0018 0x8174c
+DATA 4 0x021b002c 0xf9f26d2
+DATA 4 0x021b0030 0x20e
+DATA 4 0x021b0038 0x200aac
+DATA 4 0x021b0008 0x0
+
+DATA 4 0x021b0040 0x5f
+
+DATA 4 0x021b0000 0xc3010000
+
+DATA 4 0x021b400c 0x555a61a5
+DATA 4 0x021b4004 0x20036
+DATA 4 0x021b4010 0x160e83
+DATA 4 0x021b4014 0xdd
+DATA 4 0x021b4018 0x8174c
+DATA 4 0x021b402c 0xf9f26d2
+DATA 4 0x021b4030 0x20e
+DATA 4 0x021b4038 0x200aac
+DATA 4 0x021b4008 0x0
+
+DATA 4 0x021b4040 0x3f
+DATA 4 0x021b4000 0xc3010000
+
+DATA 4 0x021b001c 0x3f8030
+DATA 4 0x021b001c 0xff0a8030
+DATA 4 0x021b001c 0xc2018030
+DATA 4 0x021b001c 0x6028030
+DATA 4 0x021b001c 0x2038030
+
+DATA 4 0x021b401c 0x3f8030
+DATA 4 0x021b401c 0xff0a8030
+DATA 4 0x021b401c 0xc2018030
+DATA 4 0x021b401c 0x6028030
+DATA 4 0x021b401c 0x2038030
+
+DATA 4 0x021b0800 0xa1390003
+DATA 4 0x021b4800 0xa1390003
+
+DATA 4 0x021b0020 0x7800
+DATA 4 0x021b4020 0x7800
+
+DATA 4 0x021b0818 0x0
+DATA 4 0x021b4818 0x0
+
+DATA 4 0x021b0800 0xa1390003
+DATA 4 0x021b4800 0xa1390003
+
+DATA 4 0x021b08b8 0x800
+DATA 4 0x021b48b8 0x800
+
+DATA 4 0x021b001c 0x0
+DATA 4 0x021b401c 0x0
+
+DATA 4 0x021b0404 0x00011006
+
+DATA 4 0x020c4068 0x00C03F3F
+DATA 4 0x020c406c 0x0030FC03
+DATA 4 0x020c4070 0x0FFFC000
+DATA 4 0x020c4074 0x3FF00000
+DATA 4 0x020c4078 0x00FFF300
+DATA 4 0x020c407c 0x0F0000C3
+DATA 4 0x020c4080 0x000003FF
+
+/* enable AXI cache for VDOA/VPU/IPU */
+DATA 4 0x020e0010 0xF00000CF
+/* set IPU AXI-id0 Qos=0xf(bypass) AXI-id1 Qos=0x7 */
+DATA 4 0x020e0018 0x007F007F
+DATA 4 0x020e001c 0x007F007F
+
+#else
DATA 4 0x020e05a8 0x00000030
DATA 4 0x020e05b0 0x00000030
DATA 4 0x020e0524 0x00000030
@@ -142,12 +321,8 @@
DATA 4 0x021b001c 0x00000000
DATA 4 0x021b0404 0x00011006
-DATA 4 0x020e0010 0xF00000FF
-DATA 4 0x020e0018 0x00070007
-DATA 4 0x020e001c 0x00070007
-
DATA 4 0x020c4068 0x00C03F3F
-DATA 4 0x020c406c 0x0030FC00
+DATA 4 0x020c406c 0x0030FC03
DATA 4 0x020c4070 0x0FFFC000
DATA 4 0x020c4074 0x3FF00000
DATA 4 0x020c4078 0x00FFF300
@@ -159,3 +334,5 @@
/* set IPU AXI-id0 Qos=0xf(bypass) AXI-id1 Qos=0x7 */
DATA 4 0x020e0018 0x007F007F
DATA 4 0x020e001c 0x007F007F
+
+#endif /* CONFIG_MX6DQ_LPDDR2 */
diff --git a/board/freescale/mx6qarm2/imximage_mx6dl.cfg b/board/freescale/mx6qarm2/imximage_mx6dl.cfg
new file mode 100644
index 0000000..ae8dcc6
--- /dev/null
+++ b/board/freescale/mx6qarm2/imximage_mx6dl.cfg
@@ -0,0 +1,462 @@
+/*
+ * Copyright (C) 2014 Freescale Semiconductor, Inc.
+ * Jason Liu <r64343@freescale.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ *
+ * Refer doc/README.imximage for more details about how-to configure
+ * and create imximage boot image
+ *
+ * The syntax is taken as close as possible with the kwbimage
+ */
+
+/* image version */
+IMAGE_VERSION 2
+
+/*
+ * Boot Device : one of
+ * spi, sd (the board has no nand neither onenand)
+ */
+BOOT_FROM sd
+
+/*
+ * Device Configuration Data (DCD)
+ *
+ * Each entry must have the format:
+ * Addr-type Address Value
+ *
+ * where:
+ * Addr-type register length (1,2 or 4 bytes)
+ * Address absolute address of the register
+ * value value to be stored in the register
+ */
+
+
+
+#ifdef CONFIG_MX6DL_LPDDR2
+
+/* IOMUX SETTINGS */
+/* IOMUXC_SW_PAD_CTL_PAD_DRAM_SDQS0 */
+DATA 4 0x020E04bc 0x00003028
+/* IOMUXC_SW_PAD_CTL_PAD_DRAM_SDQS1 */
+DATA 4 0x020E04c0 0x00003028
+/* IOMUXC_SW_PAD_CTL_PAD_DRAM_SDQS2 */
+DATA 4 0x020E04c4 0x00003028
+/* IOMUXC_SW_PAD_CTL_PAD_DRAM_SDQS3 */
+DATA 4 0x020E04c8 0x00003028
+/* IOMUXC_SW_PAD_CTL_PAD_DRAM_SDQS4 */
+DATA 4 0x020E04cc 0x00003028
+/* IOMUXC_SW_PAD_CTL_PAD_DRAM_SDQS5 */
+DATA 4 0x020E04d0 0x00003028
+/* IOMUXC_SW_PAD_CTL_PAD_DRAM_SDQS6 */
+DATA 4 0x020E04d4 0x00003028
+/* IOMUXC_SW_PAD_CTL_PAD_DRAM_SDQS7 */
+DATA 4 0x020E04d8 0x00003028
+
+/* IOMUXC_SW_PAD_CTL_PAD_DRAM_DQM0 */
+DATA 4 0x020E0470 0x00000038
+/* IOMUXC_SW_PAD_CTL_PAD_DRAM_DQM1 */
+DATA 4 0x020E0474 0x00000038
+/* IOMUXC_SW_PAD_CTL_PAD_DRAM_DQM2 */
+DATA 4 0x020E0478 0x00000038
+/* IOMUXC_SW_PAD_CTL_PAD_DRAM_DQM3 */
+DATA 4 0x020E047c 0x00000038
+/* IOMUXC_SW_PAD_CTL_PAD_DRAM_DQM4 */
+DATA 4 0x020E0480 0x00000038
+/* IOMUXC_SW_PAD_CTL_PAD_DRAM_DQM5 */
+DATA 4 0x020E0484 0x00000038
+/* IOMUXC_SW_PAD_CTL_PAD_DRAM_DQM6 */
+DATA 4 0x020E0488 0x00000038
+/* IOMUXC_SW_PAD_CTL_PAD_DRAM_DQM7 */
+DATA 4 0x020E048c 0x00000038
+/* IOMUXC_SW_PAD_CTL_PAD_DRAM_CAS */
+DATA 4 0x020E0464 0x00000038
+/* IOMUXC_SW_PAD_CTL_PAD_DRAM_RAS */
+DATA 4 0x020E0490 0x00000038
+/* IOMUXC_SW_PAD_CTL_PAD_DRAM_SDCLK_0 */
+DATA 4 0x020E04ac 0x00000038
+/* IOMUXC_SW_PAD_CTL_PAD_DRAM_SDCLK_1 */
+DATA 4 0x020E04b0 0x00000038
+/* IOMUXC_SW_PAD_CTL_PAD_DRAM_RESET */
+DATA 4 0x020E0494 0x00000038
+/* IOMUXC_SW_PAD_CTL_PAD_DRAM_SDCKE0 */
+DATA 4 0x020E04a4 0x00000038
+/* IOMUXC_SW_PAD_CTL_PAD_DRAM_SDCKE1 */
+DATA 4 0x020E04a8 0x00000038
+/*
+ * IOMUXC_SW_PAD_CTL_PAD_DRAM_SDBA2
+ * DSE can be configured using Group Control Register:
+ * IOMUXC_SW_PAD_CTL_GRP_CTLDS
+ */
+DATA 4 0x020E04a0 0x00000000
+/* IOMUXC_SW_PAD_CTL_PAD_DRAM_SDODT0 */
+DATA 4 0x020E04b4 0x00000038
+/* IOMUXC_SW_PAD_CTL_PAD_DRAM_SDODT1 */
+DATA 4 0x020E04b8 0x00000038
+/* IOMUXC_SW_PAD_CTL_GRP_B0DS */
+DATA 4 0x020E0764 0x00000038
+/* IOMUXC_SW_PAD_CTL_GRP_B1DS */
+DATA 4 0x020E0770 0x00000038
+/* IOMUXC_SW_PAD_CTL_GRP_B2DS */
+DATA 4 0x020E0778 0x00000038
+/* IOMUXC_SW_PAD_CTL_GRP_B3DS */
+DATA 4 0x020E077c 0x00000038
+/* IOMUXC_SW_PAD_CTL_GRP_B4DS */
+DATA 4 0x020E0780 0x00000038
+/* IOMUXC_SW_PAD_CTL_GRP_B5DS */
+DATA 4 0x020E0784 0x00000038
+/* IOMUXC_SW_PAD_CTL_GRP_B6DS */
+DATA 4 0x020E078c 0x00000038
+/* IOMUXC_SW_PAD_CTL_GRP_B7DS */
+DATA 4 0x020E0748 0x00000038
+/* IOMUXC_SW_PAD_CTL_GRP_ADDDS */
+DATA 4 0x020E074c 0x00000038
+/* IOMUXC_SW_PAD_CTL_GRP_CTLDS */
+DATA 4 0x020E076c 0x00000038
+/* IOMUXC_SW_PAD_CTL_GRP_DDRMODE_CTL */
+DATA 4 0x020E0750 0x00020000
+/* IOMUXC_SW_PAD_CTL_GRP_DDRPKE */
+DATA 4 0x020E0754 0x00000000
+/* IOMUXC_SW_PAD_CTL_GRP_DDRMODE */
+DATA 4 0x020E0760 0x00020000
+/* IOMUXC_SW_PAD_CTL_GRP_DDR_TYPE */
+DATA 4 0x020E0774 0x00080000
+
+/*
+ * DDR Controller Registers
+ *
+ * Manufacturer: Mocron
+ * Device Part Number: MT42L64M64D2KH-18
+ * Clock Freq.: 528MHz
+ * MMDC channels: Both MMDC0, MMDC1
+ *Density per CS in Gb: 256M
+ * Chip Selects used: 2
+ * Number of Banks: 8
+ * Row address: 14
+ * Column address: 9
+ * Data bus width 32
+ */
+
+/* MMDC_P0_BASE_ADDR = 0x021b0000 */
+/* MMDC_P1_BASE_ADDR = 0x021b4000 */
+
+/* MMDC0_MDSCR, set the Configuration request bit during MMDC set up */
+DATA 4 0x021b001c 0x00008000
+
+/* MMDC0_MDSCR, set the Configuration request bit during MMDC set up */
+DATA 4 0x021b401c 0x00008000
+
+/*LPDDR2 ZQ params */
+DATA 4 0x021b085c 0x1b5f01ff
+DATA 4 0x021b485c 0x1b5f01ff
+
+/* Calibration setup. */
+/* DDR_PHY_P0_MPZQHWCTRL, enable on time ZQ calibration */
+DATA 4 0x021b0800 0xa1390003
+
+/*ca bus abs delay */
+DATA 4 0x021b0890 0x00400000
+/*ca bus abs delay */
+DATA 4 0x021b4890 0x00400000
+/* values of 20,40,50,60,7f tried. no difference seen */
+
+/* DDR_PHY_P1_MPWRCADL */
+DATA 4 0x021b48bc 0x00055555
+
+/*frc_msr.*/
+DATA 4 0x021b08b8 0x00000800
+/*frc_msr.*/
+DATA 4 0x021b48b8 0x00000800
+
+/* DDR_PHY_P0_MPREDQBY0DL3 */
+DATA 4 0x021b081c 0x33333333
+/* DDR_PHY_P0_MPREDQBY1DL3 */
+DATA 4 0x021b0820 0x33333333
+/* DDR_PHY_P0_MPREDQBY2DL3 */
+DATA 4 0x021b0824 0x33333333
+/* DDR_PHY_P0_MPREDQBY3DL3 */
+DATA 4 0x021b0828 0x33333333
+/* DDR_PHY_P1_MPREDQBY0DL3 */
+DATA 4 0x021b481c 0x33333333
+/* DDR_PHY_P1_MPREDQBY1DL3 */
+DATA 4 0x021b4820 0x33333333
+/* DDR_PHY_P1_MPREDQBY2DL3 */
+DATA 4 0x021b4824 0x33333333
+/* DDR_PHY_P1_MPREDQBY3DL3 */
+DATA 4 0x021b4828 0x33333333
+
+/*
+ * Read and write data delay, per byte.
+ * For optimized DDR operation it is recommended to run mmdc_calibration
+ * on your board, and replace 4 delay register assigns with resulted values
+ * Note:
+ * a. DQS gating is not relevant for LPDDR2. DSQ gating calibration section
+ * should be skipped, or the write/read calibration comming after that
+ * will stall
+ * b. The calibration code that runs for both MMDC0 & MMDC1 should be used.
+ */
+
+DATA 4 0x021b0848 0x4b4b524f
+DATA 4 0x021b4848 0x494f4c44
+
+DATA 4 0x021b0850 0x3c3d303c
+DATA 4 0x021b4850 0x3c343d38
+
+/*dqs gating dis */
+DATA 4 0x021b083c 0x20000000
+DATA 4 0x021b0840 0x0
+DATA 4 0x021b483c 0x20000000
+DATA 4 0x021b4840 0x0
+
+/*clk delay */
+DATA 4 0x021b0858 0xa00
+/*clk delay */
+DATA 4 0x021b4858 0xa00
+
+/*frc_msr */
+DATA 4 0x021b08b8 0x00000800
+/*frc_msr */
+DATA 4 0x021b48b8 0x00000800
+/* Calibration setup end */
+
+/* Channel0 - startng address 0x80000000 */
+/* MMDC0_MDCFG0 */
+DATA 4 0x021b000c 0x34386145
+
+/* MMDC0_MDPDC */
+DATA 4 0x021b0004 0x00020036
+/* MMDC0_MDCFG1 */
+DATA 4 0x021b0010 0x00100c83
+/* MMDC0_MDCFG2 */
+DATA 4 0x021b0014 0x000000Dc
+/* MMDC0_MDMISC */
+DATA 4 0x021b0018 0x0000174C
+/* MMDC0_MDRWD;*/
+DATA 4 0x021b002c 0x0f9f26d2
+/* MMDC0_MDOR */
+DATA 4 0x021b0030 0x0000020e
+/* MMDC0_MDCFG3LP */
+DATA 4 0x021b0038 0x00190778
+/* MMDC0_MDOTC */
+DATA 4 0x021b0008 0x00000000
+
+/* CS0_END */
+DATA 4 0x021b0040 0x0000005f
+/* ROC */
+DATA 4 0x021b0404 0x0000000f
+
+/* MMDC0_MDCTL */
+DATA 4 0x021b0000 0xc3010000
+
+/* Channel1 - starting address 0x10000000 */
+/* MMDC1_MDCFG0 */
+DATA 4 0x021b400c 0x34386145
+
+/* MMDC1_MDPDC */
+DATA 4 0x021b4004 0x00020036
+/* MMDC1_MDCFG1 */
+DATA 4 0x021b4010 0x00100c83
+/* MMDC1_MDCFG2 */
+DATA 4 0x021b4014 0x000000Dc
+/* MMDC1_MDMISC */
+DATA 4 0x021b4018 0x0000174C
+/* MMDC1_MDRWD;*/
+DATA 4 0x021b402c 0x0f9f26d2
+/* MMDC1_MDOR */
+DATA 4 0x021b4030 0x0000020e
+/* MMDC1_MDCFG3LP */
+DATA 4 0x021b4038 0x00190778
+/* MMDC1_MDOTC */
+DATA 4 0x021b4008 0x00000000
+
+/* CS0_END */
+DATA 4 0x021b4040 0x0000003f
+
+/* MMDC1_MDCTL */
+DATA 4 0x021b4000 0xc3010000
+
+/* Channel0 : Configure DDR device:*/
+/* MRW: BA=0 CS=0 MR_ADDR=63 MR_OP=0 */
+DATA 4 0x021b001c 0x003f8030
+/* MRW: BA=0 CS=0 MR_ADDR=10 MR_OP=ff */
+DATA 4 0x021b001c 0xff0a8030
+/* MRW: BA=0 CS=0 MR_ADDR=1 MR_OP=a2 */
+DATA 4 0x021b001c 0xa2018030
+/* MRW: BA=0 CS=0 MR_ADDR=2 MR_OP=6. tcl=8, tcwl=4 */
+DATA 4 0x021b001c 0x06028030
+/* MRW: BA=0 CS=0 MR_ADDR=3 MR_OP=2.drive=240/6 */
+DATA 4 0x021b001c 0x01038030
+
+/* Channel1 : Configure DDR device:*/
+/* MRW: BA=0 CS=0 MR_ADDR=63 MR_OP=0 */
+DATA 4 0x021b401c 0x003f8030
+/* MRW: BA=0 CS=0 MR_ADDR=10 MR_OP=ff */
+DATA 4 0x021b401c 0xff0a8030
+/* MRW: BA=0 CS=0 MR_ADDR=1 MR_OP=a2 */
+DATA 4 0x021b401c 0xa2018030
+/* MRW: BA=0 CS=0 MR_ADDR=2 MR_OP=6. tcl=8, tcwl=4 */
+DATA 4 0x021b401c 0x06028030
+/* MRW: BA=0 CS=0 MR_ADDR=3 MR_OP=2.drive=240/6 */
+DATA 4 0x021b401c 0x01038030
+
+/* MMDC0_MDREF */
+DATA 4 0x021b0020 0x00005800
+/* MMDC1_MDREF */
+DATA 4 0x021b4020 0x00005800
+
+/* DDR_PHY_P0_MPODTCTRL */
+DATA 4 0x021b0818 0x0
+/* DDR_PHY_P1_MPODTCTRL */
+DATA 4 0x021b4818 0x0
+
+/*
+ * calibration values based on calibration compare of 0x00ffff00:
+ * Note, these calibration values are based on Freescale's board
+ * May need to run calibration on target board to fine tune these
+ */
+
+/* DDR_PHY_P0_MPZQHWCTRL, enable automatic ZQ calibration */
+DATA 4 0x021b0800 0xa1310003
+
+/* DDR_PHY_P0_MPMUR0, frc_msr */
+DATA 4 0x021b08b8 0x00000800
+/* DDR_PHY_P1_MPMUR0, frc_msr */
+DATA 4 0x021b48b8 0x00000800
+
+/*
+ * MMDC0_MDSCR, clear this register
+ * (especially the configuration bit as initialization is complete)
+ */
+DATA 4 0x021b001c 0x00000000
+/*
+ * MMDC0_MDSCR, clear this register
+ * (especially the configuration bit as initialization is complete)
+ */
+DATA 4 0x021b401c 0x00000000
+
+DATA 4 0x020c4068 0x00C03F3F
+DATA 4 0x020c406c 0x0030FC03
+DATA 4 0x020c4070 0x0FFFC000
+DATA 4 0x020c4074 0x3FF00000
+DATA 4 0x020c4078 0x00FFF300
+DATA 4 0x020c407c 0x0F0000C3
+DATA 4 0x020c4080 0x000003FF
+
+DATA 4 0x020e0010 0xF00000CF
+DATA 4 0x020e0018 0x007F007F
+DATA 4 0x020e001c 0x007F007F
+
+#else /* CONFIG_MX6DL_LPDDR2 */
+
+DATA 4 0x020e0798 0x000c0000
+DATA 4 0x020e0758 0x00000000
+DATA 4 0x020e0588 0x00000030
+DATA 4 0x020e0594 0x00000030
+DATA 4 0x020e056c 0x00000030
+DATA 4 0x020e0578 0x00000030
+DATA 4 0x020e074c 0x00000030
+DATA 4 0x020e057c 0x00000030
+DATA 4 0x020e0590 0x00003000
+DATA 4 0x020e0598 0x00003000
+DATA 4 0x020e058c 0x00000000
+DATA 4 0x020e059c 0x00003030
+DATA 4 0x020e05a0 0x00003030
+DATA 4 0x020e078c 0x00000030
+DATA 4 0x020e0750 0x00020000
+DATA 4 0x020e05a8 0x00000030
+DATA 4 0x020e05b0 0x00000030
+DATA 4 0x020e0524 0x00000030
+DATA 4 0x020e051c 0x00000030
+DATA 4 0x020e0518 0x00000030
+DATA 4 0x020e050c 0x00000030
+DATA 4 0x020e05b8 0x00000030
+DATA 4 0x020e05c0 0x00000030
+DATA 4 0x020e0774 0x00020000
+DATA 4 0x020e0784 0x00000030
+DATA 4 0x020e0788 0x00000030
+DATA 4 0x020e0794 0x00000030
+DATA 4 0x020e079c 0x00000030
+DATA 4 0x020e07a0 0x00000030
+DATA 4 0x020e07a4 0x00000030
+DATA 4 0x020e07a8 0x00000030
+DATA 4 0x020e0748 0x00000030
+DATA 4 0x020e05ac 0x00000030
+DATA 4 0x020e05b4 0x00000030
+DATA 4 0x020e0528 0x00000030
+DATA 4 0x020e0520 0x00000030
+DATA 4 0x020e0514 0x00000030
+DATA 4 0x020e0510 0x00000030
+DATA 4 0x020e05bc 0x00000030
+DATA 4 0x020e05c4 0x00000030
+
+DATA 4 0x021b0800 0xa1390003
+DATA 4 0x021b4800 0xa1390003
+DATA 4 0x021b080c 0x001F001F
+DATA 4 0x021b0810 0x001F001F
+DATA 4 0x021b480c 0x00370037
+DATA 4 0x021b4810 0x00370037
+DATA 4 0x021b083c 0x422f0220
+DATA 4 0x021b0840 0x021f0219
+DATA 4 0x021b483C 0x422f0220
+DATA 4 0x021b4840 0x022d022f
+DATA 4 0x021b0848 0x47494b49
+DATA 4 0x021b4848 0x48484c47
+DATA 4 0x021b0850 0x39382b2f
+DATA 4 0x021b4850 0x2f35312c
+DATA 4 0x021b081c 0x33333333
+DATA 4 0x021b0820 0x33333333
+DATA 4 0x021b0824 0x33333333
+DATA 4 0x021b0828 0x33333333
+DATA 4 0x021b481c 0x33333333
+DATA 4 0x021b4820 0x33333333
+DATA 4 0x021b4824 0x33333333
+DATA 4 0x021b4828 0x33333333
+DATA 4 0x021b08b8 0x00000800
+DATA 4 0x021b48b8 0x00000800
+DATA 4 0x021b0004 0x0002002d
+DATA 4 0x021b0008 0x00333030
+
+DATA 4 0x021b000c 0x40445323
+DATA 4 0x021b0010 0xb66e8c63
+
+DATA 4 0x021b0014 0x01ff00db
+DATA 4 0x021b0018 0x00081740
+DATA 4 0x021b001c 0x00008000
+DATA 4 0x021b002c 0x000026d2
+DATA 4 0x021b0030 0x00440e21
+#ifdef CONFIG_DDR_32BIT
+DATA 4 0x021b0040 0x00000017
+DATA 4 0x021b0000 0xc3190000
+#else
+DATA 4 0x021b0040 0x00000027
+DATA 4 0x021b0000 0xc31a0000
+#endif
+DATA 4 0x021b001c 0x04008032
+DATA 4 0x021b001c 0x0400803a
+DATA 4 0x021b001c 0x00008033
+DATA 4 0x021b001c 0x0000803b
+DATA 4 0x021b001c 0x00428031
+DATA 4 0x021b001c 0x00428039
+DATA 4 0x021b001c 0x07208030
+DATA 4 0x021b001c 0x07208038
+DATA 4 0x021b001c 0x04008040
+DATA 4 0x021b001c 0x04008048
+DATA 4 0x021b0020 0x00005800
+DATA 4 0x021b0818 0x00000007
+DATA 4 0x021b4818 0x00000007
+DATA 4 0x021b0004 0x0002556d
+DATA 4 0x021b4004 0x00011006
+DATA 4 0x021b001c 0x00000000
+
+DATA 4 0x020c4068 0x00C03F3F
+DATA 4 0x020c406c 0x0030FC03
+DATA 4 0x020c4070 0x0FFFC000
+DATA 4 0x020c4074 0x3FF00000
+DATA 4 0x020c4078 0x00FFF300
+DATA 4 0x020c407c 0x0F0000C3
+DATA 4 0x020c4080 0x000003FF
+
+DATA 4 0x020e0010 0xF00000CF
+DATA 4 0x020e0018 0x007F007F
+DATA 4 0x020e001c 0x007F007F
+#endif /* CONFIG_MX6DL_LPDDR2 */
diff --git a/board/freescale/mx6qarm2/mx6qarm2.c b/board/freescale/mx6qarm2/mx6qarm2.c
index 6c51f3a..667dca5 100644
--- a/board/freescale/mx6qarm2/mx6qarm2.c
+++ b/board/freescale/mx6qarm2/mx6qarm2.c
@@ -32,7 +32,12 @@
int dram_init(void)
{
- gd->ram_size = get_ram_size((void *)PHYS_SDRAM, PHYS_SDRAM_SIZE);
+#if defined(CONFIG_MX6DL) && !defined(CONFIG_MX6DL_LPDDR2) && \
+ defined(CONFIG_DDR_32BIT)
+ gd->ram_size = ((phys_size_t)CONFIG_DDR_MB * 1024 * 1024) / 2;
+#else
+ gd->ram_size = (phys_size_t)CONFIG_DDR_MB * 1024 * 1024;
+#endif
return 0;
}
@@ -224,7 +229,11 @@
int checkboard(void)
{
+#ifdef CONFIG_MX6DL
+ puts("Board: MX6DL-Armadillo2\n");
+#else
puts("Board: MX6Q-Armadillo2\n");
+#endif
return 0;
}
diff --git a/board/freescale/mx6qsabreauto/mx6qsabreauto.c b/board/freescale/mx6qsabreauto/mx6qsabreauto.c
index 836d722..1cb7561 100644
--- a/board/freescale/mx6qsabreauto/mx6qsabreauto.c
+++ b/board/freescale/mx6qsabreauto/mx6qsabreauto.c
@@ -50,12 +50,12 @@
return 0;
}
-iomux_v3_cfg_t const uart4_pads[] = {
+static iomux_v3_cfg_t const uart4_pads[] = {
MX6_PAD_KEY_COL0__UART4_TX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL),
MX6_PAD_KEY_ROW0__UART4_RX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL),
};
-iomux_v3_cfg_t const enet_pads[] = {
+static iomux_v3_cfg_t const enet_pads[] = {
MX6_PAD_KEY_COL1__ENET_MDIO | MUX_PAD_CTRL(ENET_PAD_CTRL),
MX6_PAD_KEY_COL2__ENET_MDC | MUX_PAD_CTRL(ENET_PAD_CTRL),
MX6_PAD_RGMII_TXC__RGMII_TXC | MUX_PAD_CTRL(ENET_PAD_CTRL),
@@ -74,7 +74,7 @@
};
/* I2C2 PMIC, iPod, Tuner, Codec, Touch, HDMI EDID, MIPI CSI2 card */
-struct i2c_pads_info i2c_pad_info1 = {
+static struct i2c_pads_info i2c_pad_info1 = {
.scl = {
.i2c_mode = MX6_PAD_EIM_EB2__I2C2_SCL | PC,
.gpio_mode = MX6_PAD_EIM_EB2__GPIO2_IO30 | PC,
@@ -91,7 +91,7 @@
* I2C3 MLB, Port Expanders (A, B, C), Video ADC, Light Sensor,
* Compass Sensor, Accelerometer, Res Touch
*/
-struct i2c_pads_info i2c_pad_info2 = {
+static struct i2c_pads_info i2c_pad_info2 = {
.scl = {
.i2c_mode = MX6_PAD_GPIO_3__I2C3_SCL | PC,
.gpio_mode = MX6_PAD_GPIO_3__GPIO1_IO03 | PC,
@@ -104,11 +104,11 @@
}
};
-iomux_v3_cfg_t const i2c3_pads[] = {
+static iomux_v3_cfg_t const i2c3_pads[] = {
MX6_PAD_EIM_A24__GPIO5_IO04 | MUX_PAD_CTRL(NO_PAD_CTRL),
};
-iomux_v3_cfg_t const port_exp[] = {
+static iomux_v3_cfg_t const port_exp[] = {
MX6_PAD_SD2_DAT0__GPIO1_IO15 | MUX_PAD_CTRL(NO_PAD_CTRL),
};
@@ -117,7 +117,7 @@
imx_iomux_v3_setup_multiple_pads(enet_pads, ARRAY_SIZE(enet_pads));
}
-iomux_v3_cfg_t const usdhc3_pads[] = {
+static iomux_v3_cfg_t const usdhc3_pads[] = {
MX6_PAD_SD3_CLK__SD3_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL),
MX6_PAD_SD3_CMD__SD3_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL),
MX6_PAD_SD3_DAT0__SD3_DATA0 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
@@ -138,7 +138,7 @@
}
#ifdef CONFIG_FSL_ESDHC
-struct fsl_esdhc_cfg usdhc_cfg[1] = {
+static struct fsl_esdhc_cfg usdhc_cfg[1] = {
{USDHC3_BASE_ADDR},
};
diff --git a/board/freescale/imx/ddr/mx6q_4x_mt41j128.cfg b/board/freescale/mx6sabresd/mx6q_4x_mt41j128.cfg
similarity index 100%
rename from board/freescale/imx/ddr/mx6q_4x_mt41j128.cfg
rename to board/freescale/mx6sabresd/mx6q_4x_mt41j128.cfg
diff --git a/board/freescale/mx6sxsabresd/mx6sxsabresd.c b/board/freescale/mx6sxsabresd/mx6sxsabresd.c
index 5eaec1b..68d3718 100644
--- a/board/freescale/mx6sxsabresd/mx6sxsabresd.c
+++ b/board/freescale/mx6sxsabresd/mx6sxsabresd.c
@@ -157,7 +157,7 @@
#define PC MUX_PAD_CTRL(I2C_PAD_CTRL)
/* I2C1 for PMIC */
-struct i2c_pads_info i2c_pad_info1 = {
+static struct i2c_pads_info i2c_pad_info1 = {
.scl = {
.i2c_mode = MX6_PAD_GPIO1_IO00__I2C1_SCL | PC,
.gpio_mode = MX6_PAD_GPIO1_IO00__GPIO1_IO_0 | PC,
diff --git a/board/freescale/vf610twr/MAINTAINERS b/board/freescale/vf610twr/MAINTAINERS
index 56a09c9..f2997f0 100644
--- a/board/freescale/vf610twr/MAINTAINERS
+++ b/board/freescale/vf610twr/MAINTAINERS
@@ -4,3 +4,4 @@
F: board/freescale/vf610twr/
F: include/configs/vf610twr.h
F: configs/vf610twr_defconfig
+F: configs/vf610twr_nand_defconfig
diff --git a/board/freescale/vf610twr/vf610twr.c b/board/freescale/vf610twr/vf610twr.c
index 21f49fd..b634965 100644
--- a/board/freescale/vf610twr/vf610twr.c
+++ b/board/freescale/vf610twr/vf610twr.c
@@ -304,6 +304,39 @@
imx_iomux_v3_setup_multiple_pads(i2c0_pads, ARRAY_SIZE(i2c0_pads));
}
+#ifdef CONFIG_NAND_VF610_NFC
+static void setup_iomux_nfc(void)
+{
+ static const iomux_v3_cfg_t nfc_pads[] = {
+ VF610_PAD_PTD31__NF_IO15,
+ VF610_PAD_PTD30__NF_IO14,
+ VF610_PAD_PTD29__NF_IO13,
+ VF610_PAD_PTD28__NF_IO12,
+ VF610_PAD_PTD27__NF_IO11,
+ VF610_PAD_PTD26__NF_IO10,
+ VF610_PAD_PTD25__NF_IO9,
+ VF610_PAD_PTD24__NF_IO8,
+ VF610_PAD_PTD23__NF_IO7,
+ VF610_PAD_PTD22__NF_IO6,
+ VF610_PAD_PTD21__NF_IO5,
+ VF610_PAD_PTD20__NF_IO4,
+ VF610_PAD_PTD19__NF_IO3,
+ VF610_PAD_PTD18__NF_IO2,
+ VF610_PAD_PTD17__NF_IO1,
+ VF610_PAD_PTD16__NF_IO0,
+ VF610_PAD_PTB24__NF_WE_B,
+ VF610_PAD_PTB25__NF_CE0_B,
+ VF610_PAD_PTB27__NF_RE_B,
+ VF610_PAD_PTC26__NF_RB_B,
+ VF610_PAD_PTC27__NF_ALE,
+ VF610_PAD_PTC28__NF_CLE
+ };
+
+ imx_iomux_v3_setup_multiple_pads(nfc_pads, ARRAY_SIZE(nfc_pads));
+}
+#endif
+
+
static void setup_iomux_qspi(void)
{
static const iomux_v3_cfg_t qspi0_pads[] = {
@@ -380,6 +413,8 @@
CCM_CCGR7_SDHC1_CTRL_MASK);
clrsetbits_le32(&ccm->ccgr9, CCM_REG_CTRL_MASK,
CCM_CCGR9_FEC0_CTRL_MASK | CCM_CCGR9_FEC1_CTRL_MASK);
+ clrsetbits_le32(&ccm->ccgr10, CCM_REG_CTRL_MASK,
+ CCM_CCGR10_NFC_CTRL_MASK);
clrsetbits_le32(&anadig->pll2_ctrl, ANADIG_PLL2_CTRL_POWERDOWN,
ANADIG_PLL2_CTRL_ENABLE | ANADIG_PLL2_CTRL_DIV_SELECT);
@@ -399,14 +434,17 @@
CCM_CACRR_IPG_CLK_DIV(1) | CCM_CACRR_BUS_CLK_DIV(2) |
CCM_CACRR_ARM_CLK_DIV(0));
clrsetbits_le32(&ccm->cscmr1, CCM_REG_CTRL_MASK,
- CCM_CSCMR1_ESDHC1_CLK_SEL(3) | CCM_CSCMR1_QSPI0_CLK_SEL(3));
+ CCM_CSCMR1_ESDHC1_CLK_SEL(3) | CCM_CSCMR1_QSPI0_CLK_SEL(3) |
+ CCM_CSCMR1_NFC_CLK_SEL(0));
clrsetbits_le32(&ccm->cscdr1, CCM_REG_CTRL_MASK,
CCM_CSCDR1_RMII_CLK_EN);
clrsetbits_le32(&ccm->cscdr2, CCM_REG_CTRL_MASK,
- CCM_CSCDR2_ESDHC1_EN | CCM_CSCDR2_ESDHC1_CLK_DIV(0));
+ CCM_CSCDR2_ESDHC1_EN | CCM_CSCDR2_ESDHC1_CLK_DIV(0) |
+ CCM_CSCDR2_NFC_EN);
clrsetbits_le32(&ccm->cscdr3, CCM_REG_CTRL_MASK,
CCM_CSCDR3_QSPI0_EN | CCM_CSCDR3_QSPI0_DIV(1) |
- CCM_CSCDR3_QSPI0_X2_DIV(1) | CCM_CSCDR3_QSPI0_X4_DIV(3));
+ CCM_CSCDR3_QSPI0_X2_DIV(1) | CCM_CSCDR3_QSPI0_X4_DIV(3) |
+ CCM_CSCDR3_NFC_PRE_DIV(5));
clrsetbits_le32(&ccm->cscmr2, CCM_REG_CTRL_MASK,
CCM_CSCMR2_RMII_CLK_SEL(0));
}
@@ -437,6 +475,9 @@
setup_iomux_enet();
setup_iomux_i2c();
setup_iomux_qspi();
+#ifdef CONFIG_NAND_VF610_NFC
+ setup_iomux_nfc();
+#endif
return 0;
}
diff --git a/board/gateworks/gw_ventana/gw_ventana_spl.c b/board/gateworks/gw_ventana/gw_ventana_spl.c
index 9fc253b..ca35b3c 100644
--- a/board/gateworks/gw_ventana/gw_ventana_spl.c
+++ b/board/gateworks/gw_ventana/gw_ventana_spl.c
@@ -402,13 +402,6 @@
struct ventana_board_info ventana_info;
int board_model;
- /*
- * Zero out global data:
- * - this shoudl be done by crt0.S
- * - failure to zero it will cause i2c_setup to fail
- */
- memset((void *)gd, 0, sizeof(struct global_data));
-
/* setup AIPS and disable watchdog */
arch_cpu_init();
diff --git a/board/olimex/mx23_olinuxino/mx23_olinuxino.c b/board/olimex/mx23_olinuxino/mx23_olinuxino.c
index e2a03a1..313ab20 100644
--- a/board/olimex/mx23_olinuxino/mx23_olinuxino.c
+++ b/board/olimex/mx23_olinuxino/mx23_olinuxino.c
@@ -30,13 +30,25 @@
/* SSP0 clock at 96MHz */
mxs_set_sspclk(MXC_SSPCLK0, 96000, 0);
+ return 0;
+}
+
#ifdef CONFIG_CMD_USB
- /* Enable LAN9512 */
+int board_ehci_hcd_init(int port)
+{
+ /* Enable LAN9512 (Maxi) or GL850G (Mini) USB HUB power. */
gpio_direction_output(MX23_PAD_GPMI_ALE__GPIO_0_17, 1);
-#endif
+ udelay(100);
+ return 0;
+}
+int board_ehci_hcd_exit(int port)
+{
+ /* Enable LAN9512 (Maxi) or GL850G (Mini) USB HUB power. */
+ gpio_direction_output(MX23_PAD_GPMI_ALE__GPIO_0_17, 0);
return 0;
}
+#endif
int dram_init(void)
{
@@ -66,3 +78,33 @@
return 0;
}
+
+/* Fine-tune the DRAM configuration. */
+void mxs_adjust_memory_params(uint32_t *dram_vals)
+{
+ /* Enable Auto Precharge. */
+ dram_vals[3] |= 1 << 8;
+ /* Enable Fast Writes. */
+ dram_vals[5] |= 1 << 8;
+ /* tEMRS = 3*tCK */
+ dram_vals[10] &= ~(0x3 << 8);
+ dram_vals[10] |= (0x3 << 8);
+ /* CASLAT = 3*tCK */
+ dram_vals[11] &= ~(0x3 << 0);
+ dram_vals[11] |= (0x3 << 0);
+ /* tCKE = 1*tCK */
+ dram_vals[12] &= ~(0x7 << 0);
+ dram_vals[12] |= (0x1 << 0);
+ /* CASLAT_LIN_GATE = 3*tCK , CASLAT_LIN = 3*tCK, tWTR=2*tCK */
+ dram_vals[13] &= ~((0xf << 16) | (0xf << 24) | (0xf << 0));
+ dram_vals[13] |= (0x6 << 16) | (0x6 << 24) | (0x2 << 0);
+ /* tDAL = 6*tCK */
+ dram_vals[15] &= ~(0xf << 16);
+ dram_vals[15] |= (0x6 << 16);
+ /* tREF = 1040*tCK */
+ dram_vals[26] &= ~0xffff;
+ dram_vals[26] |= 0x0410;
+ /* tRAS_MAX = 9334*tCK */
+ dram_vals[32] &= ~0xffff;
+ dram_vals[32] |= 0x2475;
+}
diff --git a/board/renesas/alt/qos.c b/board/renesas/alt/qos.c
index ea51f3f..d788aa0 100644
--- a/board/renesas/alt/qos.c
+++ b/board/renesas/alt/qos.c
@@ -13,7 +13,7 @@
#include <asm/io.h>
#include <asm/arch/rmobile.h>
-/* QoS version 0.10 */
+/* QoS version 0.11 */
enum {
DBSC3_00, DBSC3_01, DBSC3_02, DBSC3_03, DBSC3_04,
@@ -156,8 +156,8 @@
}
/* CCI-400 -QoS */
- writel(0x20001000, CCI_400_MAXOT_1);
- writel(0x20001000, CCI_400_MAXOT_2);
+ writel(0x20000800, CCI_400_MAXOT_1);
+ writel(0x20000800, CCI_400_MAXOT_2);
writel(0x0000000C, CCI_400_QOSCNTL_1);
writel(0x0000000C, CCI_400_QOSCNTL_2);
diff --git a/board/renesas/koelsch/qos.c b/board/renesas/koelsch/qos.c
index 55a0420..ecf3eed 100644
--- a/board/renesas/koelsch/qos.c
+++ b/board/renesas/koelsch/qos.c
@@ -13,7 +13,7 @@
#include <asm/io.h>
#include <asm/arch/rmobile.h>
-/* QoS version 0.240 for ES1 and version 0.310 for ES2 */
+/* QoS version 0.240 for ES1 and version 0.334 for ES2 */
enum {
DBSC3_00, DBSC3_01, DBSC3_02, DBSC3_03, DBSC3_04,
@@ -116,10 +116,16 @@
/* S3C -QoS */
s3c = (struct rcar_s3c *)S3C_BASE;
if (IS_R8A7791_ES2()) {
- writel(0x00FF1B0D, &s3c->s3cadsplcr);
- writel(0x1F0D0B0A, &s3c->s3crorr);
- writel(0x1F0D0B09, &s3c->s3cworr);
- writel(0x00200808, &s3c->s3carcr11);
+ /* Linear All mode */
+ /* writel(0x00000000, &s3c->s3cadsplcr); */
+ /* Linear Linear 0x7000 to 0x7800 mode */
+ writel(0x00BF1B0C, &s3c->s3cadsplcr);
+ /* Split Linear 0x6800 t 0x7000 mode */
+ /* writel(0x00DF1B0C, &s3c->s3cadsplcr); */
+ /* Ssplit All mode */
+ /* writel(0x00FF1B0C, &s3c->s3cadsplcr); */
+ writel(0x1F0B0908, &s3c->s3crorr);
+ writel(0x1F0C0A08, &s3c->s3cworr);
} else {
writel(0x00FF1B1D, &s3c->s3cadsplcr);
writel(0x1F0D0C0C, &s3c->s3crorr);
@@ -149,10 +155,7 @@
writel(0x00002032, &s3c_qos->s3cqos8);
s3c_qos = (struct rcar_s3c_qos *)S3C_QOS_MXI_BASE;
- if (IS_R8A7791_ES2())
- writel(0x80928092, &s3c_qos->s3cqos0);
- else
- writel(0x00820082, &s3c_qos->s3cqos0);
+ writel(0x00820082, &s3c_qos->s3cqos0);
writel(0x20960020, &s3c_qos->s3cqos1);
writel(0x20302030, &s3c_qos->s3cqos2);
writel(0x20AA20DC, &s3c_qos->s3cqos3);
@@ -185,7 +188,7 @@
writel(0x00000001, &qos_addr->dbrqctr);
writel(0x00002078, &qos_addr->dbthres0);
writel(0x0000204B, &qos_addr->dbthres1);
- writel(0x00001FE7, &qos_addr->dbthres2);
+ writel(0x0000201E, &qos_addr->dbthres2);
writel(0x00000001, &qos_addr->dblgqon);
}
@@ -193,13 +196,13 @@
for (i = DBSC3_00; i < DBSC3_NR; i++) {
qos_addr = (struct rcar_dbsc3_qos *)dbsc3_0_w_qos_addr[i];
writel(0x00000002, &qos_addr->dblgcnt);
- writel(0x000020EB, &qos_addr->dbtmval0);
- writel(0x0000206E, &qos_addr->dbtmval1);
+ writel(0x00002096, &qos_addr->dbtmval0);
+ writel(0x00002064, &qos_addr->dbtmval1);
writel(0x00002050, &qos_addr->dbtmval2);
writel(0x0000203A, &qos_addr->dbtmval3);
writel(0x00000001, &qos_addr->dbrqctr);
writel(0x00002078, &qos_addr->dbthres0);
- writel(0x0000205A, &qos_addr->dbthres1);
+ writel(0x0000204B, &qos_addr->dbthres1);
writel(0x0000203C, &qos_addr->dbthres2);
writel(0x00000001, &qos_addr->dblgqon);
}
@@ -215,7 +218,7 @@
writel(0x00000001, &qos_addr->dbrqctr);
writel(0x00002078, &qos_addr->dbthres0);
writel(0x0000204B, &qos_addr->dbthres1);
- writel(0x00001FE7, &qos_addr->dbthres2);
+ writel(0x0000201E, &qos_addr->dbthres2);
writel(0x00000001, &qos_addr->dblgqon);
}
@@ -223,13 +226,13 @@
for (i = DBSC3_00; i < DBSC3_NR; i++) {
qos_addr = (struct rcar_dbsc3_qos *)dbsc3_1_w_qos_addr[i];
writel(0x00000002, &qos_addr->dblgcnt);
- writel(0x000020EB, &qos_addr->dbtmval0);
- writel(0x0000206E, &qos_addr->dbtmval1);
+ writel(0x00002096, &qos_addr->dbtmval0);
+ writel(0x00002064, &qos_addr->dbtmval1);
writel(0x00002050, &qos_addr->dbtmval2);
writel(0x0000203A, &qos_addr->dbtmval3);
writel(0x00000001, &qos_addr->dbrqctr);
writel(0x00002078, &qos_addr->dbthres0);
- writel(0x0000205A, &qos_addr->dbthres1);
+ writel(0x0000204B, &qos_addr->dbthres1);
writel(0x0000203C, &qos_addr->dbthres2);
writel(0x00000001, &qos_addr->dblgqon);
}
@@ -245,14 +248,12 @@
mxi = (struct rcar_mxi *)MXI_BASE;
writel(0x00000013, &mxi->mxrtcr);
writel(0x00000013, &mxi->mxwtcr);
- writel(0x00780080, &mxi->mxsaar0);
- writel(0x02000800, &mxi->mxsaar1);
/* QoS Control (MXI) */
mxi_qos = (struct rcar_mxi_qos *)MXI_QOS_BASE;
writel(0x0000000C, &mxi_qos->vspdu0);
writel(0x0000000C, &mxi_qos->vspdu1);
- writel(0x0000000D, &mxi_qos->du0);
+ writel(0x0000000E, &mxi_qos->du0);
writel(0x0000000D, &mxi_qos->du1);
/* AXI -QoS */
diff --git a/board/renesas/lager/lager.c b/board/renesas/lager/lager.c
index a5a0474..5302839 100644
--- a/board/renesas/lager/lager.c
+++ b/board/renesas/lager/lager.c
@@ -29,15 +29,17 @@
{
struct rcar_rwdt *rwdt = (struct rcar_rwdt *)RWDT_BASE;
struct rcar_swdt *swdt = (struct rcar_swdt *)SWDT_BASE;
- u32 stc;
/* Watchdog init */
writel(0xA5A5A500, &rwdt->rwtcsra);
writel(0xA5A5A500, &swdt->swtcsra);
/* CPU frequency setting. Set to 1.4GHz */
- stc = ((1500 / CLK2MHZ(CONFIG_SYS_CLK_FREQ)) - 1) << PLL0_STC_BIT;
- clrsetbits_le32(PLL0CR, PLL0_STC_MASK, stc);
+ if (rmobile_get_cpu_rev_integer() >= R8A7790_CUT_ES2X) {
+ u32 stc = ((1400 / CLK2MHZ(CONFIG_SYS_CLK_FREQ)) - 1)
+ << PLL0_STC_BIT;
+ clrsetbits_le32(PLL0CR, PLL0_STC_MASK, stc);
+ }
/* QoS(Quality-of-Service) Init */
qos_init();
diff --git a/board/renesas/lager/qos.c b/board/renesas/lager/qos.c
index 3742757..ce7f8ba 100644
--- a/board/renesas/lager/qos.c
+++ b/board/renesas/lager/qos.c
@@ -12,56 +12,56 @@
#include <asm/io.h>
#include <asm/arch/rmobile.h>
-/* QoS version 0.955 */
+/* QoS version 0.955 for ES1 and version 0.963 for ES2 */
enum {
- DBSC3_R00, DBSC3_R01, DBSC3_R02, DBSC3_R03, DBSC3_R04,
- DBSC3_R05, DBSC3_R06, DBSC3_R07, DBSC3_R08, DBSC3_R09,
- DBSC3_R10, DBSC3_R11, DBSC3_R12, DBSC3_R13, DBSC3_R14,
- DBSC3_R15,
- DBSC3_W00, DBSC3_W01, DBSC3_W02, DBSC3_W03, DBSC3_W04,
- DBSC3_W05, DBSC3_W06, DBSC3_W07, DBSC3_W08, DBSC3_W09,
- DBSC3_W10, DBSC3_W11, DBSC3_W12, DBSC3_W13, DBSC3_W14,
- DBSC3_W15,
+ DBSC3_00, DBSC3_01, DBSC3_02, DBSC3_03, DBSC3_04,
+ DBSC3_05, DBSC3_06, DBSC3_07, DBSC3_08, DBSC3_09,
+ DBSC3_10, DBSC3_11, DBSC3_12, DBSC3_13, DBSC3_14,
+ DBSC3_15,
DBSC3_NR,
};
-static const u32 dbsc3_qos_addr[DBSC3_NR] = {
- [DBSC3_R00] = DBSC3_0_QOS_R0_BASE,
- [DBSC3_R01] = DBSC3_0_QOS_R1_BASE,
- [DBSC3_R02] = DBSC3_0_QOS_R2_BASE,
- [DBSC3_R03] = DBSC3_0_QOS_R3_BASE,
- [DBSC3_R04] = DBSC3_0_QOS_R4_BASE,
- [DBSC3_R05] = DBSC3_0_QOS_R5_BASE,
- [DBSC3_R06] = DBSC3_0_QOS_R6_BASE,
- [DBSC3_R07] = DBSC3_0_QOS_R7_BASE,
- [DBSC3_R08] = DBSC3_0_QOS_R8_BASE,
- [DBSC3_R09] = DBSC3_0_QOS_R9_BASE,
- [DBSC3_R10] = DBSC3_0_QOS_R10_BASE,
- [DBSC3_R11] = DBSC3_0_QOS_R11_BASE,
- [DBSC3_R12] = DBSC3_0_QOS_R12_BASE,
- [DBSC3_R13] = DBSC3_0_QOS_R13_BASE,
- [DBSC3_R14] = DBSC3_0_QOS_R14_BASE,
- [DBSC3_R15] = DBSC3_0_QOS_R15_BASE,
- [DBSC3_W00] = DBSC3_0_QOS_W0_BASE,
- [DBSC3_W01] = DBSC3_0_QOS_W1_BASE,
- [DBSC3_W02] = DBSC3_0_QOS_W2_BASE,
- [DBSC3_W03] = DBSC3_0_QOS_W3_BASE,
- [DBSC3_W04] = DBSC3_0_QOS_W4_BASE,
- [DBSC3_W05] = DBSC3_0_QOS_W5_BASE,
- [DBSC3_W06] = DBSC3_0_QOS_W6_BASE,
- [DBSC3_W07] = DBSC3_0_QOS_W7_BASE,
- [DBSC3_W08] = DBSC3_0_QOS_W8_BASE,
- [DBSC3_W09] = DBSC3_0_QOS_W9_BASE,
- [DBSC3_W10] = DBSC3_0_QOS_W10_BASE,
- [DBSC3_W11] = DBSC3_0_QOS_W11_BASE,
- [DBSC3_W12] = DBSC3_0_QOS_W12_BASE,
- [DBSC3_W13] = DBSC3_0_QOS_W13_BASE,
- [DBSC3_W14] = DBSC3_0_QOS_W14_BASE,
- [DBSC3_W15] = DBSC3_0_QOS_W15_BASE,
+static u32 dbsc3_0_r_qos_addr[DBSC3_NR] = {
+ [DBSC3_00] = DBSC3_0_QOS_R0_BASE,
+ [DBSC3_01] = DBSC3_0_QOS_R1_BASE,
+ [DBSC3_02] = DBSC3_0_QOS_R2_BASE,
+ [DBSC3_03] = DBSC3_0_QOS_R3_BASE,
+ [DBSC3_04] = DBSC3_0_QOS_R4_BASE,
+ [DBSC3_05] = DBSC3_0_QOS_R5_BASE,
+ [DBSC3_06] = DBSC3_0_QOS_R6_BASE,
+ [DBSC3_07] = DBSC3_0_QOS_R7_BASE,
+ [DBSC3_08] = DBSC3_0_QOS_R8_BASE,
+ [DBSC3_09] = DBSC3_0_QOS_R9_BASE,
+ [DBSC3_10] = DBSC3_0_QOS_R10_BASE,
+ [DBSC3_11] = DBSC3_0_QOS_R11_BASE,
+ [DBSC3_12] = DBSC3_0_QOS_R12_BASE,
+ [DBSC3_13] = DBSC3_0_QOS_R13_BASE,
+ [DBSC3_14] = DBSC3_0_QOS_R14_BASE,
+ [DBSC3_15] = DBSC3_0_QOS_R15_BASE,
};
-void qos_init(void)
+static u32 dbsc3_0_w_qos_addr[DBSC3_NR] = {
+ [DBSC3_00] = DBSC3_0_QOS_W0_BASE,
+ [DBSC3_01] = DBSC3_0_QOS_W1_BASE,
+ [DBSC3_02] = DBSC3_0_QOS_W2_BASE,
+ [DBSC3_03] = DBSC3_0_QOS_W3_BASE,
+ [DBSC3_04] = DBSC3_0_QOS_W4_BASE,
+ [DBSC3_05] = DBSC3_0_QOS_W5_BASE,
+ [DBSC3_06] = DBSC3_0_QOS_W6_BASE,
+ [DBSC3_07] = DBSC3_0_QOS_W7_BASE,
+ [DBSC3_08] = DBSC3_0_QOS_W8_BASE,
+ [DBSC3_09] = DBSC3_0_QOS_W9_BASE,
+ [DBSC3_10] = DBSC3_0_QOS_W10_BASE,
+ [DBSC3_11] = DBSC3_0_QOS_W11_BASE,
+ [DBSC3_12] = DBSC3_0_QOS_W12_BASE,
+ [DBSC3_13] = DBSC3_0_QOS_W13_BASE,
+ [DBSC3_14] = DBSC3_0_QOS_W14_BASE,
+ [DBSC3_15] = DBSC3_0_QOS_W15_BASE,
+};
+
+/* QoS version 0.955 for ES1 */
+static void qos_init_es1(void)
{
int i;
struct rcar_s3c *s3c;
@@ -115,7 +115,6 @@
writel(0x20142032, &s3c_qos->s3cqos8);
s3c_qos = (struct rcar_s3c_qos *)S3C_QOS_AXI_BASE;
-
writel(0x00810089, &s3c_qos->s3cqos0);
writel(0x20410001, &s3c_qos->s3cqos1);
writel(0x200A2023, &s3c_qos->s3cqos2);
@@ -129,9 +128,24 @@
writel(0x00200808, &s3c->s3carcr11);
/* DBSC -QoS */
- /* DBSC0 - Read/Write */
- for (i = DBSC3_R00; i < DBSC3_NR; i++) {
- qos_addr = (struct rcar_dbsc3_qos *)dbsc3_qos_addr[i];
+ /* DBSC0 - Read */
+ for (i = DBSC3_00; i < DBSC3_NR; i++) {
+ qos_addr = (struct rcar_dbsc3_qos *)dbsc3_0_r_qos_addr[i];
+ writel(0x00000203, &qos_addr->dblgcnt);
+ writel(0x00002064, &qos_addr->dbtmval0);
+ writel(0x00002048, &qos_addr->dbtmval1);
+ writel(0x00002032, &qos_addr->dbtmval2);
+ writel(0x00002019, &qos_addr->dbtmval3);
+ writel(0x00000001, &qos_addr->dbrqctr);
+ writel(0x00002019, &qos_addr->dbthres0);
+ writel(0x00002019, &qos_addr->dbthres1);
+ writel(0x00002019, &qos_addr->dbthres2);
+ writel(0x00000000, &qos_addr->dblgqon);
+ }
+
+ /* DBSC0 - Write */
+ for (i = DBSC3_00; i < DBSC3_NR; i++) {
+ qos_addr = (struct rcar_dbsc3_qos *)dbsc3_0_w_qos_addr[i];
writel(0x00000203, &qos_addr->dblgcnt);
writel(0x00002064, &qos_addr->dbtmval0);
writel(0x00002048, &qos_addr->dbtmval1);
@@ -143,6 +157,7 @@
writel(0x00002019, &qos_addr->dbthres2);
writel(0x00000000, &qos_addr->dblgqon);
}
+
/* CCI-400 -QoS */
writel(0x20001000, CCI_400_MAXOT_1);
writel(0x20001000, CCI_400_MAXOT_2);
@@ -1117,3 +1132,1252 @@
writel(0x00000001, &axi_qos->qosthres2);
writel(0x00000000, &axi_qos->qosqon);
}
+
+/* QoS version 0.963 for ES2 */
+static void qos_init_es2(void)
+{
+ int i;
+ struct rcar_s3c *s3c;
+ struct rcar_s3c_qos *s3c_qos;
+ struct rcar_dbsc3_qos *qos_addr;
+ struct rcar_mxi *mxi;
+ struct rcar_mxi_qos *mxi_qos;
+ struct rcar_axi_qos *axi_qos;
+
+ /* DBSC DBADJ2 */
+ writel(0x20042004, DBSC3_0_DBADJ2);
+
+ /* S3C -QoS */
+ s3c = (struct rcar_s3c *)S3C_BASE;
+ writel(0x80000000, &s3c->s3cadsplcr);
+ writel(0x1F060504, &s3c->s3crorr);
+ writel(0x1F060503, &s3c->s3cworr);
+
+ /* QoS Control Registers */
+ s3c_qos = (struct rcar_s3c_qos *)S3C_QOS_CCI0_BASE;
+ writel(0x00890089, &s3c_qos->s3cqos0);
+ writel(0x20960010, &s3c_qos->s3cqos1);
+ writel(0x20302030, &s3c_qos->s3cqos2);
+ writel(0x20AA2200, &s3c_qos->s3cqos3);
+ writel(0x00002032, &s3c_qos->s3cqos4);
+ writel(0x20960010, &s3c_qos->s3cqos5);
+ writel(0x20302030, &s3c_qos->s3cqos6);
+ writel(0x20AA2200, &s3c_qos->s3cqos7);
+ writel(0x00002032, &s3c_qos->s3cqos8);
+
+ s3c_qos = (struct rcar_s3c_qos *)S3C_QOS_CCI1_BASE;
+ writel(0x00890089, &s3c_qos->s3cqos0);
+ writel(0x20960010, &s3c_qos->s3cqos1);
+ writel(0x20302030, &s3c_qos->s3cqos2);
+ writel(0x20AA2200, &s3c_qos->s3cqos3);
+ writel(0x00002032, &s3c_qos->s3cqos4);
+ writel(0x20960010, &s3c_qos->s3cqos5);
+ writel(0x20302030, &s3c_qos->s3cqos6);
+ writel(0x20AA2200, &s3c_qos->s3cqos7);
+ writel(0x00002032, &s3c_qos->s3cqos8);
+
+ s3c_qos = (struct rcar_s3c_qos *)S3C_QOS_MXI_BASE;
+ writel(0x80928092, &s3c_qos->s3cqos0);
+ writel(0x20960020, &s3c_qos->s3cqos1);
+ writel(0x20302030, &s3c_qos->s3cqos2);
+ writel(0x20AA20DC, &s3c_qos->s3cqos3);
+ writel(0x00002032, &s3c_qos->s3cqos4);
+ writel(0x20960020, &s3c_qos->s3cqos5);
+ writel(0x20302030, &s3c_qos->s3cqos6);
+ writel(0x20AA20DC, &s3c_qos->s3cqos7);
+ writel(0x00002032, &s3c_qos->s3cqos8);
+
+ s3c_qos = (struct rcar_s3c_qos *)S3C_QOS_AXI_BASE;
+ writel(0x00820082, &s3c_qos->s3cqos0);
+ writel(0x20960020, &s3c_qos->s3cqos1);
+ writel(0x20302030, &s3c_qos->s3cqos2);
+ writel(0x20AA20FA, &s3c_qos->s3cqos3);
+ writel(0x00002032, &s3c_qos->s3cqos4);
+ writel(0x20960020, &s3c_qos->s3cqos5);
+ writel(0x20302030, &s3c_qos->s3cqos6);
+ writel(0x20AA20FA, &s3c_qos->s3cqos7);
+ writel(0x00002032, &s3c_qos->s3cqos8);
+
+ writel(0x00200808, &s3c->s3carcr11);
+
+ /* DBSC -QoS */
+ /* DBSC0 - Read */
+ for (i = DBSC3_00; i < DBSC3_NR; i++) {
+ qos_addr = (struct rcar_dbsc3_qos *)dbsc3_0_r_qos_addr[i];
+ writel(0x00000002, &qos_addr->dblgcnt);
+ writel(0x00002096, &qos_addr->dbtmval0);
+ writel(0x00002064, &qos_addr->dbtmval1);
+ writel(0x00002032, &qos_addr->dbtmval2);
+ writel(0x00001FB0, &qos_addr->dbtmval3);
+ writel(0x00000001, &qos_addr->dbrqctr);
+ writel(0x00002078, &qos_addr->dbthres0);
+ writel(0x0000204B, &qos_addr->dbthres1);
+ writel(0x0000201E, &qos_addr->dbthres2);
+ writel(0x00000001, &qos_addr->dblgqon);
+ }
+
+ /* DBSC0 - Write */
+ for (i = DBSC3_00; i < DBSC3_NR; i++) {
+ qos_addr = (struct rcar_dbsc3_qos *)dbsc3_0_w_qos_addr[i];
+ writel(0x00000002, &qos_addr->dblgcnt);
+ writel(0x00002096, &qos_addr->dbtmval0);
+ writel(0x00002064, &qos_addr->dbtmval1);
+ writel(0x00002050, &qos_addr->dbtmval2);
+ writel(0x0000203A, &qos_addr->dbtmval3);
+ writel(0x00000001, &qos_addr->dbrqctr);
+ writel(0x00002078, &qos_addr->dbthres0);
+ writel(0x0000204B, &qos_addr->dbthres1);
+ writel(0x0000203C, &qos_addr->dbthres2);
+ writel(0x00000001, &qos_addr->dblgqon);
+ }
+
+ /* MXI -QoS */
+ /* Transaction Control (MXI) */
+ mxi = (struct rcar_mxi *)MXI_BASE;
+ writel(0x00000013, &mxi->mxrtcr);
+ writel(0x00000013, &mxi->mxwtcr);
+ writel(0x00B800C0, &mxi->mxsaar0);
+ writel(0x02000800, &mxi->mxsaar1);
+
+ /* QoS Control (MXI) */
+ mxi_qos = (struct rcar_mxi_qos *)MXI_QOS_BASE;
+ writel(0x0000000C, &mxi_qos->vspdu0);
+ writel(0x0000000C, &mxi_qos->vspdu1);
+ writel(0x0000000E, &mxi_qos->du0);
+ writel(0x0000000E, &mxi_qos->du1);
+
+ /* AXI -QoS */
+ /* Transaction Control (MXI) */
+ axi_qos = (struct rcar_axi_qos *)SYS_AXI_SYX64TO128_BASE;
+ writel(0x00000002, &axi_qos->qosconf);
+ writel(0x00002245, &axi_qos->qosctset0);
+ writel(0x00002096, &axi_qos->qosctset1);
+ writel(0x00002030, &axi_qos->qosctset2);
+ writel(0x00002030, &axi_qos->qosctset3);
+ writel(0x00000001, &axi_qos->qosreqctr);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00000000, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct rcar_axi_qos *)SYS_AXI_AVB_BASE;
+ writel(0x00000000, &axi_qos->qosconf);
+ writel(0x000020A6, &axi_qos->qosctset0);
+ writel(0x00000001, &axi_qos->qosreqctr);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00000000, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct rcar_axi_qos *)SYS_AXI_G2D_BASE;
+ writel(0x00000000, &axi_qos->qosconf);
+ writel(0x000020A6, &axi_qos->qosctset0);
+ writel(0x00000001, &axi_qos->qosreqctr);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00000000, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct rcar_axi_qos *)SYS_AXI_IMP0_BASE;
+ writel(0x00000000, &axi_qos->qosconf);
+ writel(0x00002021, &axi_qos->qosctset0);
+ writel(0x00000001, &axi_qos->qosreqctr);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00000000, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct rcar_axi_qos *)SYS_AXI_IMP1_BASE;
+ writel(0x00000000, &axi_qos->qosconf);
+ writel(0x00002037, &axi_qos->qosctset0);
+ writel(0x00000001, &axi_qos->qosreqctr);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00000000, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct rcar_axi_qos *)SYS_AXI_IMUX0_BASE;
+ writel(0x00000002, &axi_qos->qosconf);
+ writel(0x00002245, &axi_qos->qosctset0);
+ writel(0x00002096, &axi_qos->qosctset1);
+ writel(0x00002030, &axi_qos->qosctset2);
+ writel(0x00002030, &axi_qos->qosctset3);
+ writel(0x00000001, &axi_qos->qosreqctr);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00000000, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct rcar_axi_qos *)SYS_AXI_IMUX1_BASE;
+ writel(0x00000002, &axi_qos->qosconf);
+ writel(0x00002245, &axi_qos->qosctset0);
+ writel(0x00002096, &axi_qos->qosctset1);
+ writel(0x00002030, &axi_qos->qosctset2);
+ writel(0x00002030, &axi_qos->qosctset3);
+ writel(0x00000001, &axi_qos->qosreqctr);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00000000, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct rcar_axi_qos *)SYS_AXI_IMUX2_BASE;
+ writel(0x00000002, &axi_qos->qosconf);
+ writel(0x00002245, &axi_qos->qosctset0);
+ writel(0x00002096, &axi_qos->qosctset1);
+ writel(0x00002030, &axi_qos->qosctset2);
+ writel(0x00002030, &axi_qos->qosctset3);
+ writel(0x00000001, &axi_qos->qosreqctr);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00000000, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct rcar_axi_qos *)SYS_AXI_LBS_BASE;
+ writel(0x00000000, &axi_qos->qosconf);
+ writel(0x0000214C, &axi_qos->qosctset0);
+ writel(0x00000001, &axi_qos->qosreqctr);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00000000, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct rcar_axi_qos *)SYS_AXI_MMUDS_BASE;
+ writel(0x00000001, &axi_qos->qosconf);
+ writel(0x00002004, &axi_qos->qosctset0);
+ writel(0x00002096, &axi_qos->qosctset1);
+ writel(0x00002030, &axi_qos->qosctset2);
+ writel(0x00002030, &axi_qos->qosctset3);
+ writel(0x00000001, &axi_qos->qosreqctr);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00000000, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct rcar_axi_qos *)SYS_AXI_MMUM_BASE;
+ writel(0x00000001, &axi_qos->qosconf);
+ writel(0x00002004, &axi_qos->qosctset0);
+ writel(0x00002096, &axi_qos->qosctset1);
+ writel(0x00002030, &axi_qos->qosctset2);
+ writel(0x00002030, &axi_qos->qosctset3);
+ writel(0x00000001, &axi_qos->qosreqctr);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00000000, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct rcar_axi_qos *)SYS_AXI_MMUR_BASE;
+ writel(0x00000001, &axi_qos->qosconf);
+ writel(0x00002004, &axi_qos->qosctset0);
+ writel(0x00002096, &axi_qos->qosctset1);
+ writel(0x00002030, &axi_qos->qosctset2);
+ writel(0x00002030, &axi_qos->qosctset3);
+ writel(0x00000001, &axi_qos->qosreqctr);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00000000, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct rcar_axi_qos *)SYS_AXI_MMUS0_BASE;
+ writel(0x00000001, &axi_qos->qosconf);
+ writel(0x00002004, &axi_qos->qosctset0);
+ writel(0x00002096, &axi_qos->qosctset1);
+ writel(0x00002030, &axi_qos->qosctset2);
+ writel(0x00002030, &axi_qos->qosctset3);
+ writel(0x00000001, &axi_qos->qosreqctr);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00000000, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct rcar_axi_qos *)SYS_AXI_MMUS1_BASE;
+ writel(0x00000001, &axi_qos->qosconf);
+ writel(0x00002004, &axi_qos->qosctset0);
+ writel(0x00002096, &axi_qos->qosctset1);
+ writel(0x00002030, &axi_qos->qosctset2);
+ writel(0x00002030, &axi_qos->qosctset3);
+ writel(0x00000001, &axi_qos->qosreqctr);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00000000, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct rcar_axi_qos *)SYS_AXI_MTSB0_BASE;
+ writel(0x00000000, &axi_qos->qosconf);
+ writel(0x00002021, &axi_qos->qosctset0);
+ writel(0x00000001, &axi_qos->qosreqctr);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00000000, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct rcar_axi_qos *)SYS_AXI_MTSB1_BASE;
+ writel(0x00000000, &axi_qos->qosconf);
+ writel(0x00002021, &axi_qos->qosctset0);
+ writel(0x00000001, &axi_qos->qosreqctr);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00000000, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct rcar_axi_qos *)SYS_AXI_PCI_BASE;
+ writel(0x00000000, &axi_qos->qosconf);
+ writel(0x0000214C, &axi_qos->qosctset0);
+ writel(0x00000001, &axi_qos->qosreqctr);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00000000, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct rcar_axi_qos *)SYS_AXI_RTX_BASE;
+ writel(0x00000002, &axi_qos->qosconf);
+ writel(0x00002245, &axi_qos->qosctset0);
+ writel(0x00002096, &axi_qos->qosctset1);
+ writel(0x00002030, &axi_qos->qosctset2);
+ writel(0x00002030, &axi_qos->qosctset3);
+ writel(0x00000001, &axi_qos->qosreqctr);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00000000, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct rcar_axi_qos *)SYS_AXI_SDS0_BASE;
+ writel(0x00000000, &axi_qos->qosconf);
+ writel(0x000020A6, &axi_qos->qosctset0);
+ writel(0x00000001, &axi_qos->qosreqctr);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00000000, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct rcar_axi_qos *)SYS_AXI_SDS1_BASE;
+ writel(0x00000000, &axi_qos->qosconf);
+ writel(0x000020A6, &axi_qos->qosctset0);
+ writel(0x00000001, &axi_qos->qosreqctr);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00000000, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct rcar_axi_qos *)SYS_AXI_USB20_BASE;
+ writel(0x00000000, &axi_qos->qosconf);
+ writel(0x00002053, &axi_qos->qosctset0);
+ writel(0x00000001, &axi_qos->qosreqctr);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00000000, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct rcar_axi_qos *)SYS_AXI_USB21_BASE;
+ writel(0x00000000, &axi_qos->qosconf);
+ writel(0x00002053, &axi_qos->qosctset0);
+ writel(0x00000001, &axi_qos->qosreqctr);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00000000, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct rcar_axi_qos *)SYS_AXI_USB22_BASE;
+ writel(0x00000000, &axi_qos->qosconf);
+ writel(0x00002053, &axi_qos->qosctset0);
+ writel(0x00000001, &axi_qos->qosreqctr);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00000000, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct rcar_axi_qos *)SYS_AXI_USB30_BASE;
+ writel(0x00000000, &axi_qos->qosconf);
+ writel(0x0000214C, &axi_qos->qosctset0);
+ writel(0x00000001, &axi_qos->qosreqctr);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00000000, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct rcar_axi_qos *)SYS_AXI_AX2M_BASE;
+ writel(0x00000002, &axi_qos->qosconf);
+ writel(0x00002245, &axi_qos->qosctset0);
+ writel(0x00000001, &axi_qos->qosreqctr);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00000000, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct rcar_axi_qos *)SYS_AXI_CC50_BASE;
+ writel(0x00000000, &axi_qos->qosconf);
+ writel(0x00002029, &axi_qos->qosctset0);
+ writel(0x00000001, &axi_qos->qosreqctr);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00000000, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct rcar_axi_qos *)SYS_AXI_CCI_BASE;
+ writel(0x00000002, &axi_qos->qosconf);
+ writel(0x00002245, &axi_qos->qosctset0);
+ writel(0x00000001, &axi_qos->qosreqctr);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00000000, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct rcar_axi_qos *)SYS_AXI_CS_BASE;
+ writel(0x00000000, &axi_qos->qosconf);
+ writel(0x00002053, &axi_qos->qosctset0);
+ writel(0x00000001, &axi_qos->qosreqctr);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00000000, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct rcar_axi_qos *)SYS_AXI_DDM_BASE;
+ writel(0x00000000, &axi_qos->qosconf);
+ writel(0x000020A6, &axi_qos->qosctset0);
+ writel(0x00000001, &axi_qos->qosreqctr);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00000000, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct rcar_axi_qos *)SYS_AXI_ETH_BASE;
+ writel(0x00000000, &axi_qos->qosconf);
+ writel(0x00002053, &axi_qos->qosctset0);
+ writel(0x00000001, &axi_qos->qosreqctr);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00000000, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct rcar_axi_qos *)SYS_AXI_MPXM_BASE;
+ writel(0x00000002, &axi_qos->qosconf);
+ writel(0x00002245, &axi_qos->qosctset0);
+ writel(0x00000001, &axi_qos->qosreqctr);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00000000, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct rcar_axi_qos *)SYS_AXI_SAT0_BASE;
+ writel(0x00000000, &axi_qos->qosconf);
+ writel(0x00002053, &axi_qos->qosctset0);
+ writel(0x00000001, &axi_qos->qosreqctr);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00000000, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct rcar_axi_qos *)SYS_AXI_SAT1_BASE;
+ writel(0x00000000, &axi_qos->qosconf);
+ writel(0x00002053, &axi_qos->qosctset0);
+ writel(0x00000001, &axi_qos->qosreqctr);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00000000, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct rcar_axi_qos *)SYS_AXI_SDM0_BASE;
+ writel(0x00000000, &axi_qos->qosconf);
+ writel(0x0000214C, &axi_qos->qosctset0);
+ writel(0x00000001, &axi_qos->qosreqctr);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00000000, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct rcar_axi_qos *)SYS_AXI_SDM1_BASE;
+ writel(0x00000000, &axi_qos->qosconf);
+ writel(0x0000214C, &axi_qos->qosctset0);
+ writel(0x00000001, &axi_qos->qosreqctr);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00000000, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct rcar_axi_qos *)SYS_AXI_TRAB_BASE;
+ writel(0x00000000, &axi_qos->qosconf);
+ writel(0x000020A6, &axi_qos->qosctset0);
+ writel(0x00000001, &axi_qos->qosreqctr);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00000000, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct rcar_axi_qos *)SYS_AXI_UDM0_BASE;
+ writel(0x00000000, &axi_qos->qosconf);
+ writel(0x00002053, &axi_qos->qosctset0);
+ writel(0x00000001, &axi_qos->qosreqctr);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00000000, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct rcar_axi_qos *)SYS_AXI_UDM1_BASE;
+ writel(0x00000000, &axi_qos->qosconf);
+ writel(0x00002053, &axi_qos->qosctset0);
+ writel(0x00000001, &axi_qos->qosreqctr);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00000000, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ /* QoS Register (RT-AXI) */
+ axi_qos = (struct rcar_axi_qos *)RT_AXI_SHX_BASE;
+ writel(0x00000000, &axi_qos->qosconf);
+ writel(0x00002053, &axi_qos->qosctset0);
+ writel(0x00002096, &axi_qos->qosctset1);
+ writel(0x00002030, &axi_qos->qosctset2);
+ writel(0x00002030, &axi_qos->qosctset3);
+ writel(0x00000001, &axi_qos->qosreqctr);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00000000, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct rcar_axi_qos *)RT_AXI_DBG_BASE;
+ writel(0x00000000, &axi_qos->qosconf);
+ writel(0x00002053, &axi_qos->qosctset0);
+ writel(0x00002096, &axi_qos->qosctset1);
+ writel(0x00002030, &axi_qos->qosctset2);
+ writel(0x00002030, &axi_qos->qosctset3);
+ writel(0x00000001, &axi_qos->qosreqctr);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00000000, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct rcar_axi_qos *)RT_AXI_RDM_BASE;
+ writel(0x00000000, &axi_qos->qosconf);
+ writel(0x00002299, &axi_qos->qosctset0);
+ writel(0x00000001, &axi_qos->qosreqctr);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00000000, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct rcar_axi_qos *)RT_AXI_RDS_BASE;
+ writel(0x00000000, &axi_qos->qosconf);
+ writel(0x00002029, &axi_qos->qosctset0);
+ writel(0x00000001, &axi_qos->qosreqctr);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00000000, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct rcar_axi_qos *)RT_AXI_RTX64TO128_BASE;
+ writel(0x00000002, &axi_qos->qosconf);
+ writel(0x00002245, &axi_qos->qosctset0);
+ writel(0x00002096, &axi_qos->qosctset1);
+ writel(0x00002030, &axi_qos->qosctset2);
+ writel(0x00002030, &axi_qos->qosctset3);
+ writel(0x00000001, &axi_qos->qosreqctr);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00000000, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct rcar_axi_qos *)RT_AXI_STPRO_BASE;
+ writel(0x00000000, &axi_qos->qosconf);
+ writel(0x00002029, &axi_qos->qosctset0);
+ writel(0x00002096, &axi_qos->qosctset1);
+ writel(0x00002030, &axi_qos->qosctset2);
+ writel(0x00002030, &axi_qos->qosctset3);
+ writel(0x00000001, &axi_qos->qosreqctr);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00000000, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct rcar_axi_qos *)RT_AXI_SY2RT_BASE;
+ writel(0x00000002, &axi_qos->qosconf);
+ writel(0x00002245, &axi_qos->qosctset0);
+ writel(0x00000001, &axi_qos->qosreqctr);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00000000, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ /* QoS Register (MP-AXI) */
+ axi_qos = (struct rcar_axi_qos *)MP_AXI_ADSP_BASE;
+ writel(0x00000000, &axi_qos->qosconf);
+ writel(0x00002037, &axi_qos->qosctset0);
+ writel(0x00000001, &axi_qos->qosreqctr);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00000000, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct rcar_axi_qos *)MP_AXI_ASDS0_BASE;
+ writel(0x00000001, &axi_qos->qosconf);
+ writel(0x00002014, &axi_qos->qosctset0);
+ writel(0x00000040, &axi_qos->qosreqctr);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00000000, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct rcar_axi_qos *)MP_AXI_ASDS1_BASE;
+ writel(0x00000001, &axi_qos->qosconf);
+ writel(0x00002014, &axi_qos->qosctset0);
+ writel(0x00000040, &axi_qos->qosreqctr);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00000000, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct rcar_axi_qos *)MP_AXI_MLP_BASE;
+ writel(0x00000001, &axi_qos->qosconf);
+ writel(0x00001FF0, &axi_qos->qosctset0);
+ writel(0x00000020, &axi_qos->qosreqctr);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00002001, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct rcar_axi_qos *)MP_AXI_MMUMP_BASE;
+ writel(0x00000001, &axi_qos->qosconf);
+ writel(0x00002004, &axi_qos->qosctset0);
+ writel(0x00002096, &axi_qos->qosctset1);
+ writel(0x00002030, &axi_qos->qosctset2);
+ writel(0x00002030, &axi_qos->qosctset3);
+ writel(0x00000001, &axi_qos->qosreqctr);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00000000, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct rcar_axi_qos *)MP_AXI_SPU_BASE;
+ writel(0x00000000, &axi_qos->qosconf);
+ writel(0x00002053, &axi_qos->qosctset0);
+ writel(0x00000001, &axi_qos->qosreqctr);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00000000, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct rcar_axi_qos *)MP_AXI_SPUC_BASE;
+ writel(0x00000000, &axi_qos->qosconf);
+ writel(0x0000206E, &axi_qos->qosctset0);
+ writel(0x00000001, &axi_qos->qosreqctr);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00000000, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ /* QoS Register (SYS-AXI256) */
+ axi_qos = (struct rcar_axi_qos *)SYS_AXI256_AXI128TO256_BASE;
+ writel(0x00000002, &axi_qos->qosconf);
+ writel(0x000020EB, &axi_qos->qosctset0);
+ writel(0x00002096, &axi_qos->qosctset1);
+ writel(0x00002030, &axi_qos->qosctset2);
+ writel(0x00002030, &axi_qos->qosctset3);
+ writel(0x00000001, &axi_qos->qosreqctr);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00000000, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct rcar_axi_qos *)SYS_AXI256_SYX_BASE;
+ writel(0x00000002, &axi_qos->qosconf);
+ writel(0x000020EB, &axi_qos->qosctset0);
+ writel(0x00002096, &axi_qos->qosctset1);
+ writel(0x00002030, &axi_qos->qosctset2);
+ writel(0x00002030, &axi_qos->qosctset3);
+ writel(0x00000001, &axi_qos->qosreqctr);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00000000, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct rcar_axi_qos *)SYS_AXI256_MPX_BASE;
+ writel(0x00000002, &axi_qos->qosconf);
+ writel(0x000020EB, &axi_qos->qosctset0);
+ writel(0x00002096, &axi_qos->qosctset1);
+ writel(0x00002030, &axi_qos->qosctset2);
+ writel(0x00002030, &axi_qos->qosctset3);
+ writel(0x00000001, &axi_qos->qosreqctr);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00000000, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct rcar_axi_qos *)SYS_AXI256_MXI_BASE;
+ writel(0x00000002, &axi_qos->qosconf);
+ writel(0x000020EB, &axi_qos->qosctset0);
+ writel(0x00002096, &axi_qos->qosctset1);
+ writel(0x00002030, &axi_qos->qosctset2);
+ writel(0x00002030, &axi_qos->qosctset3);
+ writel(0x00000001, &axi_qos->qosreqctr);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00000000, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ /* QoS Register (CCI-AXI) */
+ axi_qos = (struct rcar_axi_qos *)CCI_AXI_MMUS0_BASE;
+ writel(0x00000001, &axi_qos->qosconf);
+ writel(0x00002004, &axi_qos->qosctset0);
+ writel(0x00002096, &axi_qos->qosctset1);
+ writel(0x00002030, &axi_qos->qosctset2);
+ writel(0x00002030, &axi_qos->qosctset3);
+ writel(0x00000001, &axi_qos->qosreqctr);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00000000, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct rcar_axi_qos *)CCI_AXI_SYX2_BASE;
+ writel(0x00000002, &axi_qos->qosconf);
+ writel(0x00002245, &axi_qos->qosctset0);
+ writel(0x00002096, &axi_qos->qosctset1);
+ writel(0x00002030, &axi_qos->qosctset2);
+ writel(0x00002030, &axi_qos->qosctset3);
+ writel(0x00000001, &axi_qos->qosreqctr);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00000000, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct rcar_axi_qos *)CCI_AXI_MMUR_BASE;
+ writel(0x00000001, &axi_qos->qosconf);
+ writel(0x00002004, &axi_qos->qosctset0);
+ writel(0x00002096, &axi_qos->qosctset1);
+ writel(0x00002030, &axi_qos->qosctset2);
+ writel(0x00002030, &axi_qos->qosctset3);
+ writel(0x00000001, &axi_qos->qosreqctr);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00000000, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct rcar_axi_qos *)CCI_AXI_MMUDS_BASE;
+ writel(0x00000001, &axi_qos->qosconf);
+ writel(0x00002004, &axi_qos->qosctset0);
+ writel(0x00002096, &axi_qos->qosctset1);
+ writel(0x00002030, &axi_qos->qosctset2);
+ writel(0x00002030, &axi_qos->qosctset3);
+ writel(0x00000001, &axi_qos->qosreqctr);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00000000, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct rcar_axi_qos *)CCI_AXI_MMUM_BASE;
+ writel(0x00000001, &axi_qos->qosconf);
+ writel(0x00002004, &axi_qos->qosctset0);
+ writel(0x00002096, &axi_qos->qosctset1);
+ writel(0x00002030, &axi_qos->qosctset2);
+ writel(0x00002030, &axi_qos->qosctset3);
+ writel(0x00000001, &axi_qos->qosreqctr);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00000000, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct rcar_axi_qos *)CCI_AXI_MXI_BASE;
+ writel(0x00000002, &axi_qos->qosconf);
+ writel(0x00002245, &axi_qos->qosctset0);
+ writel(0x00002096, &axi_qos->qosctset1);
+ writel(0x00002030, &axi_qos->qosctset2);
+ writel(0x00002030, &axi_qos->qosctset3);
+ writel(0x00000001, &axi_qos->qosreqctr);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00000000, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct rcar_axi_qos *)CCI_AXI_MMUS1_BASE;
+ writel(0x00000001, &axi_qos->qosconf);
+ writel(0x00002004, &axi_qos->qosctset0);
+ writel(0x00002096, &axi_qos->qosctset1);
+ writel(0x00002030, &axi_qos->qosctset2);
+ writel(0x00002030, &axi_qos->qosctset3);
+ writel(0x00000001, &axi_qos->qosreqctr);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00000000, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct rcar_axi_qos *)CCI_AXI_MMUMP_BASE;
+ writel(0x00000001, &axi_qos->qosconf);
+ writel(0x00002004, &axi_qos->qosctset0);
+ writel(0x00002096, &axi_qos->qosctset1);
+ writel(0x00002030, &axi_qos->qosctset2);
+ writel(0x00002030, &axi_qos->qosctset3);
+ writel(0x00000001, &axi_qos->qosreqctr);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00000000, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ /* QoS Register (Media-AXI) */
+ axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_MXR_BASE;
+ writel(0x00000002, &axi_qos->qosconf);
+ writel(0x000020dc, &axi_qos->qosctset0);
+ writel(0x00002096, &axi_qos->qosctset1);
+ writel(0x00002030, &axi_qos->qosctset2);
+ writel(0x00002030, &axi_qos->qosctset3);
+ writel(0x00000020, &axi_qos->qosreqctr);
+ writel(0x000020AA, &axi_qos->qosthres0);
+ writel(0x00002032, &axi_qos->qosthres1);
+ writel(0x00000001, &axi_qos->qosthres2);
+
+ axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_MXW_BASE;
+ writel(0x00000002, &axi_qos->qosconf);
+ writel(0x000020dc, &axi_qos->qosctset0);
+ writel(0x00002096, &axi_qos->qosctset1);
+ writel(0x00002030, &axi_qos->qosctset2);
+ writel(0x00002030, &axi_qos->qosctset3);
+ writel(0x00000020, &axi_qos->qosreqctr);
+ writel(0x000020AA, &axi_qos->qosthres0);
+ writel(0x00002032, &axi_qos->qosthres1);
+ writel(0x00000001, &axi_qos->qosthres2);
+
+ axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_JPR_BASE;
+ writel(0x00000001, &axi_qos->qosconf);
+ writel(0x00002190, &axi_qos->qosctset0);
+ writel(0x00000020, &axi_qos->qosreqctr);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00000001, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_JPW_BASE;
+ writel(0x00000001, &axi_qos->qosconf);
+ writel(0x00002190, &axi_qos->qosctset0);
+ writel(0x00000020, &axi_qos->qosreqctr);
+ writel(0x00002004, &axi_qos->qosthres0);
+ writel(0x00000001, &axi_qos->qosthres1);
+ writel(0x00000001, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_GCU0R_BASE;
+ writel(0x00000001, &axi_qos->qosconf);
+ writel(0x00002190, &axi_qos->qosctset0);
+ writel(0x00000020, &axi_qos->qosreqctr);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00000001, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_GCU0W_BASE;
+ writel(0x00000001, &axi_qos->qosconf);
+ writel(0x00002190, &axi_qos->qosctset0);
+ writel(0x00000020, &axi_qos->qosreqctr);
+ writel(0x00002004, &axi_qos->qosthres0);
+ writel(0x00000001, &axi_qos->qosthres1);
+ writel(0x00000001, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_GCU1R_BASE;
+ writel(0x00000001, &axi_qos->qosconf);
+ writel(0x00002190, &axi_qos->qosctset0);
+ writel(0x00000020, &axi_qos->qosreqctr);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00000001, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_GCU1W_BASE;
+ writel(0x00000001, &axi_qos->qosconf);
+ writel(0x00002190, &axi_qos->qosctset0);
+ writel(0x00000020, &axi_qos->qosreqctr);
+ writel(0x00002004, &axi_qos->qosthres0);
+ writel(0x00000001, &axi_qos->qosthres1);
+ writel(0x00000001, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_TDMR_BASE;
+ writel(0x00000001, &axi_qos->qosconf);
+ writel(0x00002190, &axi_qos->qosctset0);
+ writel(0x00000020, &axi_qos->qosreqctr);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00000001, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_TDMW_BASE;
+ writel(0x00000001, &axi_qos->qosconf);
+ writel(0x00002190, &axi_qos->qosctset0);
+ writel(0x00000020, &axi_qos->qosreqctr);
+ writel(0x00002004, &axi_qos->qosthres0);
+ writel(0x00000001, &axi_qos->qosthres1);
+ writel(0x00000001, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_VSP0CR_BASE;
+ writel(0x00000001, &axi_qos->qosconf);
+ writel(0x00002190, &axi_qos->qosctset0);
+ writel(0x00000020, &axi_qos->qosreqctr);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00000001, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_VSP0CW_BASE;
+ writel(0x00000001, &axi_qos->qosconf);
+ writel(0x00002190, &axi_qos->qosctset0);
+ writel(0x00000020, &axi_qos->qosreqctr);
+ writel(0x00002004, &axi_qos->qosthres0);
+ writel(0x00000001, &axi_qos->qosthres1);
+ writel(0x00000001, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_VSP1CR_BASE;
+ writel(0x00000001, &axi_qos->qosconf);
+ writel(0x00002190, &axi_qos->qosctset0);
+ writel(0x00000020, &axi_qos->qosreqctr);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00000001, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_VSP1CW_BASE;
+ writel(0x00000001, &axi_qos->qosconf);
+ writel(0x00002190, &axi_qos->qosctset0);
+ writel(0x00000020, &axi_qos->qosreqctr);
+ writel(0x00002004, &axi_qos->qosthres0);
+ writel(0x00000001, &axi_qos->qosthres1);
+ writel(0x00000001, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_VSPDU0CR_BASE;
+ writel(0x00000001, &axi_qos->qosconf);
+ writel(0x00002190, &axi_qos->qosctset0);
+ writel(0x00000020, &axi_qos->qosreqctr);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00000001, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_VSPDU0CW_BASE;
+ writel(0x00000001, &axi_qos->qosconf);
+ writel(0x00002190, &axi_qos->qosctset0);
+ writel(0x00000020, &axi_qos->qosreqctr);
+ writel(0x00002004, &axi_qos->qosthres0);
+ writel(0x00000001, &axi_qos->qosthres1);
+ writel(0x00000001, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_VSPDU1CR_BASE;
+ writel(0x00000001, &axi_qos->qosconf);
+ writel(0x00002190, &axi_qos->qosctset0);
+ writel(0x00000020, &axi_qos->qosreqctr);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00000001, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_VSPDU1CW_BASE;
+ writel(0x00000001, &axi_qos->qosconf);
+ writel(0x00002190, &axi_qos->qosctset0);
+ writel(0x00000020, &axi_qos->qosreqctr);
+ writel(0x00002004, &axi_qos->qosthres0);
+ writel(0x00000001, &axi_qos->qosthres1);
+ writel(0x00000001, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_VIN0W_BASE;
+ writel(0x00000001, &axi_qos->qosconf);
+ writel(0x00001FF0, &axi_qos->qosctset0);
+ writel(0x00000020, &axi_qos->qosreqctr);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00002001, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_VSP0R_BASE;
+ writel(0x00000001, &axi_qos->qosconf);
+ writel(0x000020C8, &axi_qos->qosctset0);
+ writel(0x00000020, &axi_qos->qosreqctr);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00000001, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_VSP0W_BASE;
+ writel(0x00000001, &axi_qos->qosconf);
+ writel(0x000020C8, &axi_qos->qosctset0);
+ writel(0x00000020, &axi_qos->qosreqctr);
+ writel(0x00002004, &axi_qos->qosthres0);
+ writel(0x00000001, &axi_qos->qosthres1);
+ writel(0x00000001, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_FDP0R_BASE;
+ writel(0x00000001, &axi_qos->qosconf);
+ writel(0x000020C8, &axi_qos->qosctset0);
+ writel(0x00000020, &axi_qos->qosreqctr);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00000001, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_FDP0W_BASE;
+ writel(0x00000001, &axi_qos->qosconf);
+ writel(0x000020C8, &axi_qos->qosctset0);
+ writel(0x00000020, &axi_qos->qosreqctr);
+ writel(0x00002004, &axi_qos->qosthres0);
+ writel(0x00000001, &axi_qos->qosthres1);
+ writel(0x00000001, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_IMSR_BASE;
+ writel(0x00000001, &axi_qos->qosconf);
+ writel(0x000020C8, &axi_qos->qosctset0);
+ writel(0x00000020, &axi_qos->qosreqctr);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00000001, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_IMSW_BASE;
+ writel(0x00000001, &axi_qos->qosconf);
+ writel(0x000020C8, &axi_qos->qosctset0);
+ writel(0x00000020, &axi_qos->qosreqctr);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00000001, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_VSP1R_BASE;
+ writel(0x00000001, &axi_qos->qosconf);
+ writel(0x000020C8, &axi_qos->qosctset0);
+ writel(0x00000020, &axi_qos->qosreqctr);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00000001, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_VSP1W_BASE;
+ writel(0x00000001, &axi_qos->qosconf);
+ writel(0x000020C8, &axi_qos->qosctset0);
+ writel(0x00000020, &axi_qos->qosreqctr);
+ writel(0x00002004, &axi_qos->qosthres0);
+ writel(0x00000001, &axi_qos->qosthres1);
+ writel(0x00000001, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_FDP1R_BASE;
+ writel(0x00000001, &axi_qos->qosconf);
+ writel(0x000020C8, &axi_qos->qosctset0);
+ writel(0x00000020, &axi_qos->qosreqctr);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00000001, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_FDP1W_BASE;
+ writel(0x00000001, &axi_qos->qosconf);
+ writel(0x000020C8, &axi_qos->qosctset0);
+ writel(0x00000020, &axi_qos->qosreqctr);
+ writel(0x00002004, &axi_qos->qosthres0);
+ writel(0x00000001, &axi_qos->qosthres1);
+ writel(0x00000001, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_IMRR_BASE;
+ writel(0x00000001, &axi_qos->qosconf);
+ writel(0x000020C8, &axi_qos->qosctset0);
+ writel(0x00000020, &axi_qos->qosreqctr);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00000001, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_IMRW_BASE;
+ writel(0x00000001, &axi_qos->qosconf);
+ writel(0x000020C8, &axi_qos->qosctset0);
+ writel(0x00000020, &axi_qos->qosreqctr);
+ writel(0x00002004, &axi_qos->qosthres0);
+ writel(0x00000001, &axi_qos->qosthres1);
+ writel(0x00000001, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_FDP2R_BASE;
+ writel(0x00000001, &axi_qos->qosconf);
+ writel(0x000020C8, &axi_qos->qosctset0);
+ writel(0x00000020, &axi_qos->qosreqctr);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00000001, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_FDP2W_BASE;
+ writel(0x00000001, &axi_qos->qosconf);
+ writel(0x000020C8, &axi_qos->qosctset0);
+ writel(0x00000020, &axi_qos->qosreqctr);
+ writel(0x00002004, &axi_qos->qosthres0);
+ writel(0x00000001, &axi_qos->qosthres1);
+ writel(0x00000001, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_VSPD0R_BASE;
+ writel(0x00000003, &axi_qos->qosconf);
+ writel(0x000020C8, &axi_qos->qosctset0);
+ writel(0x00000001, &axi_qos->qosreqctr);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00000001, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_VSPD0W_BASE;
+ writel(0x00000003, &axi_qos->qosconf);
+ writel(0x000020C8, &axi_qos->qosctset0);
+ writel(0x00000001, &axi_qos->qosreqctr);
+ writel(0x00000001, &axi_qos->qosthres0);
+ writel(0x00000001, &axi_qos->qosthres1);
+ writel(0x00000001, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_VSPD1R_BASE;
+ writel(0x00000003, &axi_qos->qosconf);
+ writel(0x000020C8, &axi_qos->qosctset0);
+ writel(0x00000001, &axi_qos->qosreqctr);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00000001, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_VSPD1W_BASE;
+ writel(0x00000003, &axi_qos->qosconf);
+ writel(0x000020C8, &axi_qos->qosctset0);
+ writel(0x00000001, &axi_qos->qosreqctr);
+ writel(0x00000001, &axi_qos->qosthres0);
+ writel(0x00000001, &axi_qos->qosthres1);
+ writel(0x00000001, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_DU0R_BASE;
+ writel(0x00000003, &axi_qos->qosconf);
+ writel(0x00002063, &axi_qos->qosctset0);
+ writel(0x00000001, &axi_qos->qosreqctr);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00000001, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_DU0W_BASE;
+ writel(0x00000003, &axi_qos->qosconf);
+ writel(0x00002063, &axi_qos->qosctset0);
+ writel(0x00000001, &axi_qos->qosreqctr);
+ writel(0x00000001, &axi_qos->qosthres0);
+ writel(0x00000001, &axi_qos->qosthres1);
+ writel(0x00000001, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_DU1R_BASE;
+ writel(0x00000003, &axi_qos->qosconf);
+ writel(0x00002063, &axi_qos->qosctset0);
+ writel(0x00000001, &axi_qos->qosreqctr);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00000001, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_DU1W_BASE;
+ writel(0x00000003, &axi_qos->qosconf);
+ writel(0x00002063, &axi_qos->qosctset0);
+ writel(0x00000001, &axi_qos->qosreqctr);
+ writel(0x00000001, &axi_qos->qosthres0);
+ writel(0x00000001, &axi_qos->qosthres1);
+ writel(0x00000001, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_VCP0CR_BASE;
+ writel(0x00000001, &axi_qos->qosconf);
+ writel(0x00002073, &axi_qos->qosctset0);
+ writel(0x00000020, &axi_qos->qosreqctr);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00000001, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_VCP0CW_BASE;
+ writel(0x00000001, &axi_qos->qosconf);
+ writel(0x00002073, &axi_qos->qosctset0);
+ writel(0x00000020, &axi_qos->qosreqctr);
+ writel(0x00002004, &axi_qos->qosthres0);
+ writel(0x00000001, &axi_qos->qosthres1);
+ writel(0x00000001, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_VCP0VR_BASE;
+ writel(0x00000001, &axi_qos->qosconf);
+ writel(0x00002073, &axi_qos->qosctset0);
+ writel(0x00000020, &axi_qos->qosreqctr);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00000001, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_VCP0VW_BASE;
+ writel(0x00000001, &axi_qos->qosconf);
+ writel(0x00002073, &axi_qos->qosctset0);
+ writel(0x00000020, &axi_qos->qosreqctr);
+ writel(0x00002004, &axi_qos->qosthres0);
+ writel(0x00000001, &axi_qos->qosthres1);
+ writel(0x00000001, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_VPC0R_BASE;
+ writel(0x00000001, &axi_qos->qosconf);
+ writel(0x00002073, &axi_qos->qosctset0);
+ writel(0x00000020, &axi_qos->qosreqctr);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00000001, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_VCP1CR_BASE;
+ writel(0x00000001, &axi_qos->qosconf);
+ writel(0x00002073, &axi_qos->qosctset0);
+ writel(0x00000020, &axi_qos->qosreqctr);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00000001, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_VCP1CW_BASE;
+ writel(0x00000001, &axi_qos->qosconf);
+ writel(0x00002073, &axi_qos->qosctset0);
+ writel(0x00000020, &axi_qos->qosreqctr);
+ writel(0x00002004, &axi_qos->qosthres0);
+ writel(0x00000001, &axi_qos->qosthres1);
+ writel(0x00000001, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_VCP1VR_BASE;
+ writel(0x00000001, &axi_qos->qosconf);
+ writel(0x00002073, &axi_qos->qosctset0);
+ writel(0x00000020, &axi_qos->qosreqctr);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00000001, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_VCP1VW_BASE;
+ writel(0x00000001, &axi_qos->qosconf);
+ writel(0x00002073, &axi_qos->qosctset0);
+ writel(0x00000020, &axi_qos->qosreqctr);
+ writel(0x00002004, &axi_qos->qosthres0);
+ writel(0x00000001, &axi_qos->qosthres1);
+ writel(0x00000001, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_VPC1R_BASE;
+ writel(0x00000001, &axi_qos->qosconf);
+ writel(0x00002073, &axi_qos->qosctset0);
+ writel(0x00000020, &axi_qos->qosreqctr);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00000001, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+}
+
+void qos_init(void)
+{
+ if (rmobile_get_cpu_rev_integer() >= R8A7790_CUT_ES2X)
+ qos_init_es2();
+ else
+ qos_init_es1();
+}
diff --git a/board/samsung/odroid/odroid.c b/board/samsung/odroid/odroid.c
index fd5d2d2..5edb250 100644
--- a/board/samsung/odroid/odroid.c
+++ b/board/samsung/odroid/odroid.c
@@ -158,10 +158,10 @@
* For MOUThpm = 1000 MHz (MOUTapll)
* doutcopy = MOUThpm / (ratio + 1) = 200 (4)
* sclkhpm = doutcopy / (ratio + 1) = 200 (4)
- * cores_out = armclk / (ratio + 1) = 1000 (0)
+ * cores_out = armclk / (ratio + 1) = 200 (4)
*/
clr = COPY_RATIO(7) | HPM_RATIO(7) | CORES_RATIO(7);
- set = COPY_RATIO(4) | HPM_RATIO(4) | CORES_RATIO(0);
+ set = COPY_RATIO(4) | HPM_RATIO(4) | CORES_RATIO(4);
clrsetbits_le32(&clk->div_cpu1, clr, set);
@@ -195,8 +195,8 @@
while (readl(&clk->mux_stat_dmc) & MUX_STAT_DMC_CHANGING)
continue;
- /* Set MPLL to 880MHz */
- set = SDIV(0) | PDIV(3) | MDIV(110) | FSEL(0) | PLL_ENABLE(1);
+ /* Set MPLL to 800MHz */
+ set = SDIV(0) | PDIV(3) | MDIV(100) | FSEL(0) | PLL_ENABLE(1);
clrsetbits_le32(&clk->mpll_con0, clr_pll_con0, set);
@@ -220,15 +220,15 @@
DMC_RATIO(7) | DMCD_RATIO(7) | DMCP_RATIO(7);
/*
* For:
- * MOUTdmc = 880 MHz
- * MOUTdphy = 880 MHz
+ * MOUTdmc = 800 MHz
+ * MOUTdphy = 800 MHz
*
- * aclk_acp = MOUTdmc / (ratio + 1) = 220 (3)
- * pclk_acp = aclk_acp / (ratio + 1) = 110 (1)
- * sclk_dphy = MOUTdphy / (ratio + 1) = 440 (1)
- * sclk_dmc = MOUTdmc / (ratio + 1) = 440 (1)
- * aclk_dmcd = sclk_dmc / (ratio + 1) = 220 (1)
- * aclk_dmcp = aclk_dmcd / (ratio + 1) = 110 (1)
+ * aclk_acp = MOUTdmc / (ratio + 1) = 200 (3)
+ * pclk_acp = aclk_acp / (ratio + 1) = 100 (1)
+ * sclk_dphy = MOUTdphy / (ratio + 1) = 400 (1)
+ * sclk_dmc = MOUTdmc / (ratio + 1) = 400 (1)
+ * aclk_dmcd = sclk_dmc / (ratio + 1) = 200 (1)
+ * aclk_dmcp = aclk_dmcd / (ratio + 1) = 100 (1)
*/
set = ACP_RATIO(3) | ACP_PCLK_RATIO(1) | DPHY_RATIO(1) |
DMC_RATIO(1) | DMCD_RATIO(1) | DMCP_RATIO(1);
@@ -244,13 +244,13 @@
C2C_ACLK_RATIO(7) | DVSEM_RATIO(127) | DPM_RATIO(127);
/*
* For:
- * MOUTg2d = 880 MHz
- * MOUTc2c = 880 Mhz
+ * MOUTg2d = 800 MHz
+ * MOUTc2c = 800 Mhz
* MOUTpwi = 108 MHz
*
- * sclk_g2d_acp = MOUTg2d / (ratio + 1) = 440 (1)
- * sclk_c2c = MOUTc2c / (ratio + 1) = 440 (1)
- * aclk_c2c = sclk_c2c / (ratio + 1) = 220 (1)
+ * sclk_g2d_acp = MOUTg2d / (ratio + 1) = 400 (1)
+ * sclk_c2c = MOUTc2c / (ratio + 1) = 400 (1)
+ * aclk_c2c = sclk_c2c / (ratio + 1) = 200 (1)
* sclk_pwi = MOUTpwi / (ratio + 1) = 18 (5)
*/
set = G2D_ACP_RATIO(1) | C2C_RATIO(1) | PWI_RATIO(5) |
@@ -282,9 +282,9 @@
clr = UART0_RATIO(15) | UART1_RATIO(15) | UART2_RATIO(15) |
UART3_RATIO(15) | UART4_RATIO(15);
/*
- * For MOUTuart0-4: 880MHz
+ * For MOUTuart0-4: 800MHz
*
- * SCLK_UARTx = MOUTuartX / (ratio + 1) = 110 (7)
+ * SCLK_UARTx = MOUTuartX / (ratio + 1) = 100 (7)
*/
set = UART0_RATIO(7) | UART1_RATIO(7) | UART2_RATIO(7) |
UART3_RATIO(7) | UART4_RATIO(7);
@@ -298,12 +298,12 @@
clr = MMC0_RATIO(15) | MMC0_PRE_RATIO(255) | MMC1_RATIO(15) |
MMC1_PRE_RATIO(255);
/*
- * For MOUTmmc0-3 = 880 MHz (MPLL)
+ * For MOUTmmc0-3 = 800 MHz (MPLL)
*
- * DOUTmmc1 = MOUTmmc1 / (ratio + 1) = 110 (7)
- * sclk_mmc1 = DOUTmmc1 / (ratio + 1) = 60 (1)
- * DOUTmmc0 = MOUTmmc0 / (ratio + 1) = 110 (7)
- * sclk_mmc0 = DOUTmmc0 / (ratio + 1) = 60 (1)
+ * DOUTmmc1 = MOUTmmc1 / (ratio + 1) = 100 (7)
+ * sclk_mmc1 = DOUTmmc1 / (ratio + 1) = 50 (1)
+ * DOUTmmc0 = MOUTmmc0 / (ratio + 1) = 100 (7)
+ * sclk_mmc0 = DOUTmmc0 / (ratio + 1) = 50 (1)
*/
set = MMC0_RATIO(7) | MMC0_PRE_RATIO(1) | MMC1_RATIO(7) |
MMC1_PRE_RATIO(1);
@@ -318,12 +318,12 @@
clr = MMC2_RATIO(15) | MMC2_PRE_RATIO(255) | MMC3_RATIO(15) |
MMC3_PRE_RATIO(255);
/*
- * For MOUTmmc0-3 = 880 MHz (MPLL)
+ * For MOUTmmc0-3 = 800 MHz (MPLL)
*
- * DOUTmmc3 = MOUTmmc3 / (ratio + 1) = 110 (7)
- * sclk_mmc3 = DOUTmmc3 / (ratio + 1) = 60 (1)
- * DOUTmmc2 = MOUTmmc2 / (ratio + 1) = 110 (7)
- * sclk_mmc2 = DOUTmmc2 / (ratio + 1) = 60 (1)
+ * DOUTmmc3 = MOUTmmc3 / (ratio + 1) = 100 (7)
+ * sclk_mmc3 = DOUTmmc3 / (ratio + 1) = 50 (1)
+ * DOUTmmc2 = MOUTmmc2 / (ratio + 1) = 100 (7)
+ * sclk_mmc2 = DOUTmmc2 / (ratio + 1) = 50 (1)
*/
set = MMC2_RATIO(7) | MMC2_PRE_RATIO(1) | MMC3_RATIO(7) |
MMC3_PRE_RATIO(1);
@@ -337,10 +337,10 @@
/* CLK_DIV_FSYS3 */
clr = MMC4_RATIO(15) | MMC4_PRE_RATIO(255);
/*
- * For MOUTmmc4 = 880 MHz (MPLL)
+ * For MOUTmmc4 = 800 MHz (MPLL)
*
- * DOUTmmc4 = MOUTmmc4 / (ratio + 1) = 110 (7)
- * sclk_mmc4 = DOUTmmc4 / (ratio + 1) = 110 (0)
+ * DOUTmmc4 = MOUTmmc4 / (ratio + 1) = 100 (7)
+ * sclk_mmc4 = DOUTmmc4 / (ratio + 1) = 100 (0)
*/
set = MMC4_RATIO(7) | MMC4_PRE_RATIO(0);
diff --git a/board/samsung/smdk5250/MAINTAINERS b/board/samsung/smdk5250/MAINTAINERS
index 8a2a4aa..070593e 100644
--- a/board/samsung/smdk5250/MAINTAINERS
+++ b/board/samsung/smdk5250/MAINTAINERS
@@ -6,7 +6,7 @@
F: configs/smdk5250_defconfig
SNOW BOARD
-M: Rajeshwari Shinde <rajeshwari.s@samsung.com>
+M: Akshay Saraswat <akshay.s@samsung.com>
S: Maintained
F: include/configs/snow.h
F: configs/snow_defconfig
diff --git a/board/samsung/smdk5420/MAINTAINERS b/board/samsung/smdk5420/MAINTAINERS
index c8241a8..e0f5c7a 100644
--- a/board/samsung/smdk5420/MAINTAINERS
+++ b/board/samsung/smdk5420/MAINTAINERS
@@ -4,9 +4,5 @@
F: board/samsung/smdk5420/
F: include/configs/peach-pit.h
F: configs/peach-pit_defconfig
-
-SMDK5420 BOARD
-M: Rajeshwari Shinde <rajeshwari.s@samsung.com>
-S: Maintained
F: include/configs/smdk5420.h
F: configs/smdk5420_defconfig
diff --git a/configs/cgtqmx6qeval_defconfig b/configs/cgtqmx6qeval_defconfig
index 6699381..4eba4be 100644
--- a/configs/cgtqmx6qeval_defconfig
+++ b/configs/cgtqmx6qeval_defconfig
@@ -1,3 +1,3 @@
-CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/freescale/imx/ddr/mx6q_4x_mt41j128.cfg,MX6Q"
+CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/congatec/cgtqmx6eval/imximage.cfg,MX6Q"
CONFIG_ARM=y
CONFIG_TARGET_CGTQMX6EVAL=y
diff --git a/configs/mx6dlarm2_defconfig b/configs/mx6dlarm2_defconfig
new file mode 100644
index 0000000..de0193f
--- /dev/null
+++ b/configs/mx6dlarm2_defconfig
@@ -0,0 +1,3 @@
+CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/freescale/mx6qarm2/imximage_mx6dl.cfg,MX6DL,DDR_MB=2048"
+CONFIG_ARM=y
+CONFIG_TARGET_MX6QARM2=y
diff --git a/configs/mx6dlarm2_lpddr2_defconfig b/configs/mx6dlarm2_lpddr2_defconfig
new file mode 100644
index 0000000..cc432cf
--- /dev/null
+++ b/configs/mx6dlarm2_lpddr2_defconfig
@@ -0,0 +1,3 @@
+CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/freescale/mx6qarm2/imximage_mx6dl.cfg,MX6DL,MX6DL_LPDDR2,DDR_MB=512"
+CONFIG_ARM=y
+CONFIG_TARGET_MX6QARM2=y
diff --git a/configs/mx6qarm2_defconfig b/configs/mx6qarm2_defconfig
index bdcc672..3fe3559 100644
--- a/configs/mx6qarm2_defconfig
+++ b/configs/mx6qarm2_defconfig
@@ -1,3 +1,3 @@
-CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/freescale/mx6qarm2/imximage.cfg"
+CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/freescale/mx6qarm2/imximage.cfg,MX6Q,DDR_MB=2048"
CONFIG_ARM=y
CONFIG_TARGET_MX6QARM2=y
diff --git a/configs/mx6qarm2_lpddr2_defconfig b/configs/mx6qarm2_lpddr2_defconfig
new file mode 100644
index 0000000..491e22a
--- /dev/null
+++ b/configs/mx6qarm2_lpddr2_defconfig
@@ -0,0 +1,3 @@
+CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/freescale/mx6qarm2/imximage.cfg,MX6Q,MX6DQ_LPDDR2,DDR_MB=512"
+CONFIG_ARM=y
+CONFIG_TARGET_MX6QARM2=y
diff --git a/configs/mx6qsabresd_defconfig b/configs/mx6qsabresd_defconfig
index dc8e254..67c1b77 100644
--- a/configs/mx6qsabresd_defconfig
+++ b/configs/mx6qsabresd_defconfig
@@ -1,3 +1,3 @@
-CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/freescale/imx/ddr/mx6q_4x_mt41j128.cfg,MX6Q"
+CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/freescale/mx6sabresd/mx6q_4x_mt41j128.cfg,MX6Q"
CONFIG_ARM=y
CONFIG_TARGET_MX6SABRESD=y
diff --git a/configs/ot1200_defconfig b/configs/ot1200_defconfig
new file mode 100644
index 0000000..c516038
--- /dev/null
+++ b/configs/ot1200_defconfig
@@ -0,0 +1,3 @@
+CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/bachmann/ot1200/mx6q_4x_mt41j128.cfg,MX6Q"
+CONFIG_ARM=y
+CONFIG_TARGET_OT1200=y
diff --git a/configs/s5p_goni_defconfig b/configs/s5p_goni_defconfig
index c0c3509..618e590 100644
--- a/configs/s5p_goni_defconfig
+++ b/configs/s5p_goni_defconfig
@@ -1,2 +1,4 @@
CONFIG_ARM=y
+CONFIG_ARCH_S5PC1XX=y
CONFIG_TARGET_S5P_GONI=y
+CONFIG_DEFAULT_DEVICE_TREE="s5pc1xx-goni"
diff --git a/configs/smdkc100_defconfig b/configs/smdkc100_defconfig
index 7455235..041030f 100644
--- a/configs/smdkc100_defconfig
+++ b/configs/smdkc100_defconfig
@@ -1,2 +1,4 @@
CONFIG_ARM=y
CONFIG_TARGET_SMDKC100=y
+CONFIG_ARCH_S5PC1XX=y
+CONFIG_DEFAULT_DEVICE_TREE="s5pc1xx-smdkc100"
diff --git a/configs/smdkv310_defconfig b/configs/smdkv310_defconfig
index 44da273..0d1a24f 100644
--- a/configs/smdkv310_defconfig
+++ b/configs/smdkv310_defconfig
@@ -2,3 +2,4 @@
+S:CONFIG_ARM=y
+S:CONFIG_ARCH_EXYNOS=y
+S:CONFIG_TARGET_SMDKV310=y
+CONFIG_DEFAULT_DEVICE_TREE="exynos4210-smdkv310"
diff --git a/configs/vf610twr_defconfig b/configs/vf610twr_defconfig
index 10e6432..7de374a 100644
--- a/configs/vf610twr_defconfig
+++ b/configs/vf610twr_defconfig
@@ -1,3 +1,3 @@
-CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/freescale/vf610twr/imximage.cfg"
+CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/freescale/vf610twr/imximage.cfg,ENV_IS_IN_MMC"
CONFIG_ARM=y
CONFIG_TARGET_VF610TWR=y
diff --git a/configs/vf610twr_nand_defconfig b/configs/vf610twr_nand_defconfig
new file mode 100644
index 0000000..e78db26
--- /dev/null
+++ b/configs/vf610twr_nand_defconfig
@@ -0,0 +1,3 @@
+CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/freescale/vf610twr/imximage.cfg,ENV_IS_IN_NAND"
+CONFIG_ARM=y
+CONFIG_TARGET_VF610TWR=y
diff --git a/drivers/mmc/s5p_sdhci.c b/drivers/mmc/s5p_sdhci.c
index 2ff0ec2..637dd97 100644
--- a/drivers/mmc/s5p_sdhci.c
+++ b/drivers/mmc/s5p_sdhci.c
@@ -14,9 +14,7 @@
#include <asm/arch/mmc.h>
#include <asm/arch/clk.h>
#include <errno.h>
-#ifdef CONFIG_OF_CONTROL
#include <asm/arch/pinmux.h>
-#endif
static char *S5P_NAME = "SAMSUNG SDHCI";
static void s5p_sdhci_set_control_reg(struct sdhci_host *host)
diff --git a/drivers/mtd/nand/Makefile b/drivers/mtd/nand/Makefile
index 47eb34f..1f02bfc 100644
--- a/drivers/mtd/nand/Makefile
+++ b/drivers/mtd/nand/Makefile
@@ -53,6 +53,7 @@
obj-$(CONFIG_NAND_KIRKWOOD) += kirkwood_nand.o
obj-$(CONFIG_NAND_KMETER1) += kmeter1_nand.o
obj-$(CONFIG_NAND_MPC5121_NFC) += mpc5121_nfc.o
+obj-$(CONFIG_NAND_VF610_NFC) += vf610_nfc.o
obj-$(CONFIG_NAND_MXC) += mxc_nand.o
obj-$(CONFIG_NAND_MXS) += mxs_nand.o
obj-$(CONFIG_NAND_NDFC) += ndfc.o
diff --git a/drivers/mtd/nand/vf610_nfc.c b/drivers/mtd/nand/vf610_nfc.c
new file mode 100644
index 0000000..7feb3a7
--- /dev/null
+++ b/drivers/mtd/nand/vf610_nfc.c
@@ -0,0 +1,724 @@
+/*
+ * Copyright 2009-2014 Freescale Semiconductor, Inc. and others
+ *
+ * Description: MPC5125, VF610, MCF54418 and Kinetis K70 Nand driver.
+ * Ported to U-Boot by Stefan Agner
+ * Based on RFC driver posted on Kernel Mailing list by Bill Pringlemeir
+ * Jason ported to M54418TWR and MVFA5.
+ * Authors: Stefan Agner <stefan.agner@toradex.com>
+ * Bill Pringlemeir <bpringlemeir@nbsps.com>
+ * Shaohui Xie <b21989@freescale.com>
+ * Jason Jin <Jason.jin@freescale.com>
+ *
+ * Based on original driver mpc5121_nfc.c.
+ *
+ * This is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * Limitations:
+ * - Untested on MPC5125 and M54418.
+ * - DMA not used.
+ * - 2K pages or less.
+ * - Only 2K page w. 64+OOB and hardware ECC.
+ */
+
+#include <common.h>
+#include <malloc.h>
+
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/nand.h>
+#include <linux/mtd/partitions.h>
+
+#include <nand.h>
+#include <errno.h>
+#include <asm/io.h>
+
+/* Register Offsets */
+#define NFC_FLASH_CMD1 0x3F00
+#define NFC_FLASH_CMD2 0x3F04
+#define NFC_COL_ADDR 0x3F08
+#define NFC_ROW_ADDR 0x3F0c
+#define NFC_ROW_ADDR_INC 0x3F14
+#define NFC_FLASH_STATUS1 0x3F18
+#define NFC_FLASH_STATUS2 0x3F1c
+#define NFC_CACHE_SWAP 0x3F28
+#define NFC_SECTOR_SIZE 0x3F2c
+#define NFC_FLASH_CONFIG 0x3F30
+#define NFC_IRQ_STATUS 0x3F38
+
+/* Addresses for NFC MAIN RAM BUFFER areas */
+#define NFC_MAIN_AREA(n) ((n) * 0x1000)
+
+#define PAGE_2K 0x0800
+#define OOB_64 0x0040
+
+/*
+ * NFC_CMD2[CODE] values. See section:
+ * - 31.4.7 Flash Command Code Description, Vybrid manual
+ * - 23.8.6 Flash Command Sequencer, MPC5125 manual
+ *
+ * Briefly these are bitmasks of controller cycles.
+ */
+#define READ_PAGE_CMD_CODE 0x7EE0
+#define PROGRAM_PAGE_CMD_CODE 0x7FC0
+#define ERASE_CMD_CODE 0x4EC0
+#define READ_ID_CMD_CODE 0x4804
+#define RESET_CMD_CODE 0x4040
+#define STATUS_READ_CMD_CODE 0x4068
+
+/* NFC ECC mode define */
+#define ECC_BYPASS 0
+#define ECC_45_BYTE 6
+
+/*** Register Mask and bit definitions */
+
+/* NFC_FLASH_CMD1 Field */
+#define CMD_BYTE2_MASK 0xFF000000
+#define CMD_BYTE2_SHIFT 24
+
+/* NFC_FLASH_CM2 Field */
+#define CMD_BYTE1_MASK 0xFF000000
+#define CMD_BYTE1_SHIFT 24
+#define CMD_CODE_MASK 0x00FFFF00
+#define CMD_CODE_SHIFT 8
+#define BUFNO_MASK 0x00000006
+#define BUFNO_SHIFT 1
+#define START_BIT (1<<0)
+
+/* NFC_COL_ADDR Field */
+#define COL_ADDR_MASK 0x0000FFFF
+#define COL_ADDR_SHIFT 0
+
+/* NFC_ROW_ADDR Field */
+#define ROW_ADDR_MASK 0x00FFFFFF
+#define ROW_ADDR_SHIFT 0
+#define ROW_ADDR_CHIP_SEL_RB_MASK 0xF0000000
+#define ROW_ADDR_CHIP_SEL_RB_SHIFT 28
+#define ROW_ADDR_CHIP_SEL_MASK 0x0F000000
+#define ROW_ADDR_CHIP_SEL_SHIFT 24
+
+/* NFC_FLASH_STATUS2 Field */
+#define STATUS_BYTE1_MASK 0x000000FF
+
+/* NFC_FLASH_CONFIG Field */
+#define CONFIG_ECC_SRAM_ADDR_MASK 0x7FC00000
+#define CONFIG_ECC_SRAM_ADDR_SHIFT 22
+#define CONFIG_ECC_SRAM_REQ_BIT (1<<21)
+#define CONFIG_DMA_REQ_BIT (1<<20)
+#define CONFIG_ECC_MODE_MASK 0x000E0000
+#define CONFIG_ECC_MODE_SHIFT 17
+#define CONFIG_FAST_FLASH_BIT (1<<16)
+#define CONFIG_16BIT (1<<7)
+#define CONFIG_BOOT_MODE_BIT (1<<6)
+#define CONFIG_ADDR_AUTO_INCR_BIT (1<<5)
+#define CONFIG_BUFNO_AUTO_INCR_BIT (1<<4)
+#define CONFIG_PAGE_CNT_MASK 0xF
+#define CONFIG_PAGE_CNT_SHIFT 0
+
+/* NFC_IRQ_STATUS Field */
+#define IDLE_IRQ_BIT (1<<29)
+#define IDLE_EN_BIT (1<<20)
+#define CMD_DONE_CLEAR_BIT (1<<18)
+#define IDLE_CLEAR_BIT (1<<17)
+
+#define NFC_TIMEOUT (1000)
+
+/* ECC status placed at end of buffers. */
+#define ECC_SRAM_ADDR ((PAGE_2K+256-8) >> 3)
+#define ECC_STATUS_MASK 0x80
+#define ECC_ERR_COUNT 0x3F
+
+/*
+ * ECC status is stored at NFC_CFG[ECCADD] +4 for little-endian
+ * and +7 for big-endian SOC.
+ */
+#ifdef CONFIG_VF610
+#define ECC_OFFSET 4
+#else
+#define ECC_OFFSET 7
+#endif
+
+struct vf610_nfc {
+ struct mtd_info *mtd;
+ struct nand_chip chip;
+ void __iomem *regs;
+ uint column;
+ int spareonly;
+ int page;
+ /* Status and ID are in alternate locations. */
+ int alt_buf;
+#define ALT_BUF_ID 1
+#define ALT_BUF_STAT 2
+ struct clk *clk;
+};
+
+#define mtd_to_nfc(_mtd) \
+ (struct vf610_nfc *)((struct nand_chip *)_mtd->priv)->priv
+
+static u8 bbt_pattern[] = {'B', 'b', 't', '0' };
+static u8 mirror_pattern[] = {'1', 't', 'b', 'B' };
+
+static struct nand_bbt_descr bbt_main_descr = {
+ .options = NAND_BBT_LASTBLOCK | NAND_BBT_CREATE | NAND_BBT_WRITE |
+ NAND_BBT_2BIT | NAND_BBT_VERSION,
+ .offs = 11,
+ .len = 4,
+ .veroffs = 15,
+ .maxblocks = 4,
+ .pattern = bbt_pattern,
+};
+
+static struct nand_bbt_descr bbt_mirror_descr = {
+ .options = NAND_BBT_LASTBLOCK | NAND_BBT_CREATE | NAND_BBT_WRITE |
+ NAND_BBT_2BIT | NAND_BBT_VERSION,
+ .offs = 11,
+ .len = 4,
+ .veroffs = 15,
+ .maxblocks = 4,
+ .pattern = mirror_pattern,
+};
+
+static struct nand_ecclayout vf610_nfc_ecc45 = {
+ .eccbytes = 45,
+ .eccpos = {19, 20, 21, 22, 23,
+ 24, 25, 26, 27, 28, 29, 30, 31,
+ 32, 33, 34, 35, 36, 37, 38, 39,
+ 40, 41, 42, 43, 44, 45, 46, 47,
+ 48, 49, 50, 51, 52, 53, 54, 55,
+ 56, 57, 58, 59, 60, 61, 62, 63},
+ .oobfree = {
+ {.offset = 8,
+ .length = 11} }
+};
+
+static inline u32 vf610_nfc_read(struct mtd_info *mtd, uint reg)
+{
+ struct vf610_nfc *nfc = mtd_to_nfc(mtd);
+
+ return readl(nfc->regs + reg);
+}
+
+static inline void vf610_nfc_write(struct mtd_info *mtd, uint reg, u32 val)
+{
+ struct vf610_nfc *nfc = mtd_to_nfc(mtd);
+
+ writel(val, nfc->regs + reg);
+}
+
+static inline void vf610_nfc_set(struct mtd_info *mtd, uint reg, u32 bits)
+{
+ vf610_nfc_write(mtd, reg, vf610_nfc_read(mtd, reg) | bits);
+}
+
+static inline void vf610_nfc_clear(struct mtd_info *mtd, uint reg, u32 bits)
+{
+ vf610_nfc_write(mtd, reg, vf610_nfc_read(mtd, reg) & ~bits);
+}
+
+static inline void vf610_nfc_set_field(struct mtd_info *mtd, u32 reg,
+ u32 mask, u32 shift, u32 val)
+{
+ vf610_nfc_write(mtd, reg,
+ (vf610_nfc_read(mtd, reg) & (~mask)) | val << shift);
+}
+
+static inline void vf610_nfc_memcpy(void *dst, const void *src, size_t n)
+{
+ /*
+ * Use this accessor for the interal SRAM buffers. On ARM we can
+ * treat the SRAM buffer as if its memory, hence use memcpy
+ */
+ memcpy(dst, src, n);
+}
+
+/* Clear flags for upcoming command */
+static inline void vf610_nfc_clear_status(void __iomem *regbase)
+{
+ void __iomem *reg = regbase + NFC_IRQ_STATUS;
+ u32 tmp = __raw_readl(reg);
+ tmp |= CMD_DONE_CLEAR_BIT | IDLE_CLEAR_BIT;
+ __raw_writel(tmp, reg);
+}
+
+/* Wait for complete operation */
+static inline void vf610_nfc_done(struct mtd_info *mtd)
+{
+ struct vf610_nfc *nfc = mtd_to_nfc(mtd);
+ uint start;
+
+ /*
+ * Barrier is needed after this write. This write need
+ * to be done before reading the next register the first
+ * time.
+ * vf610_nfc_set implicates such a barrier by using writel
+ * to write to the register.
+ */
+ vf610_nfc_set(mtd, NFC_FLASH_CMD2, START_BIT);
+
+ start = get_timer(0);
+
+ while (!(vf610_nfc_read(mtd, NFC_IRQ_STATUS) & IDLE_IRQ_BIT)) {
+ if (get_timer(start) > NFC_TIMEOUT) {
+ printf("Timeout while waiting for !BUSY.\n");
+ return;
+ }
+ }
+ vf610_nfc_clear_status(nfc->regs);
+}
+
+static u8 vf610_nfc_get_id(struct mtd_info *mtd, int col)
+{
+ u32 flash_id;
+
+ if (col < 4) {
+ flash_id = vf610_nfc_read(mtd, NFC_FLASH_STATUS1);
+ return (flash_id >> (3-col)*8) & 0xff;
+ } else {
+ flash_id = vf610_nfc_read(mtd, NFC_FLASH_STATUS2);
+ return flash_id >> 24;
+ }
+}
+
+static u8 vf610_nfc_get_status(struct mtd_info *mtd)
+{
+ return vf610_nfc_read(mtd, NFC_FLASH_STATUS2) & STATUS_BYTE1_MASK;
+}
+
+/* Single command */
+static void vf610_nfc_send_command(void __iomem *regbase, u32 cmd_byte1,
+ u32 cmd_code)
+{
+ void __iomem *reg = regbase + NFC_FLASH_CMD2;
+ u32 tmp;
+ vf610_nfc_clear_status(regbase);
+
+ tmp = __raw_readl(reg);
+ tmp &= ~(CMD_BYTE1_MASK | CMD_CODE_MASK | BUFNO_MASK);
+ tmp |= cmd_byte1 << CMD_BYTE1_SHIFT;
+ tmp |= cmd_code << CMD_CODE_SHIFT;
+ __raw_writel(tmp, reg);
+}
+
+/* Two commands */
+static void vf610_nfc_send_commands(void __iomem *regbase, u32 cmd_byte1,
+ u32 cmd_byte2, u32 cmd_code)
+{
+ void __iomem *reg = regbase + NFC_FLASH_CMD1;
+ u32 tmp;
+ vf610_nfc_send_command(regbase, cmd_byte1, cmd_code);
+
+ tmp = __raw_readl(reg);
+ tmp &= ~CMD_BYTE2_MASK;
+ tmp |= cmd_byte2 << CMD_BYTE2_SHIFT;
+ __raw_writel(tmp, reg);
+}
+
+static void vf610_nfc_addr_cycle(struct mtd_info *mtd, int column, int page)
+{
+ if (column != -1) {
+ struct vf610_nfc *nfc = mtd_to_nfc(mtd);
+ if (nfc->chip.options | NAND_BUSWIDTH_16)
+ column = column/2;
+ vf610_nfc_set_field(mtd, NFC_COL_ADDR, COL_ADDR_MASK,
+ COL_ADDR_SHIFT, column);
+ }
+ if (page != -1)
+ vf610_nfc_set_field(mtd, NFC_ROW_ADDR, ROW_ADDR_MASK,
+ ROW_ADDR_SHIFT, page);
+}
+
+/* Send command to NAND chip */
+static void vf610_nfc_command(struct mtd_info *mtd, unsigned command,
+ int column, int page)
+{
+ struct vf610_nfc *nfc = mtd_to_nfc(mtd);
+
+ nfc->column = max(column, 0);
+ nfc->spareonly = 0;
+ nfc->alt_buf = 0;
+
+ switch (command) {
+ case NAND_CMD_PAGEPROG:
+ nfc->page = -1;
+ vf610_nfc_send_commands(nfc->regs, NAND_CMD_SEQIN,
+ command, PROGRAM_PAGE_CMD_CODE);
+ vf610_nfc_addr_cycle(mtd, column, page);
+ break;
+
+ case NAND_CMD_RESET:
+ vf610_nfc_send_command(nfc->regs, command, RESET_CMD_CODE);
+ break;
+ /*
+ * NFC does not support sub-page reads and writes,
+ * so emulate them using full page transfers.
+ */
+ case NAND_CMD_READOOB:
+ nfc->spareonly = 1;
+ case NAND_CMD_SEQIN: /* Pre-read for partial writes. */
+ case NAND_CMD_READ0:
+ column = 0;
+ /* Already read? */
+ if (nfc->page == page)
+ return;
+ nfc->page = page;
+ vf610_nfc_send_commands(nfc->regs, NAND_CMD_READ0,
+ NAND_CMD_READSTART, READ_PAGE_CMD_CODE);
+ vf610_nfc_addr_cycle(mtd, column, page);
+ break;
+
+ case NAND_CMD_ERASE1:
+ if (nfc->page == page)
+ nfc->page = -1;
+ vf610_nfc_send_commands(nfc->regs, command,
+ NAND_CMD_ERASE2, ERASE_CMD_CODE);
+ vf610_nfc_addr_cycle(mtd, column, page);
+ break;
+
+ case NAND_CMD_READID:
+ nfc->alt_buf = ALT_BUF_ID;
+ vf610_nfc_send_command(nfc->regs, command, READ_ID_CMD_CODE);
+ break;
+
+ case NAND_CMD_STATUS:
+ nfc->alt_buf = ALT_BUF_STAT;
+ vf610_nfc_send_command(nfc->regs, command,
+ STATUS_READ_CMD_CODE);
+ break;
+ default:
+ return;
+ }
+
+ vf610_nfc_done(mtd);
+}
+
+static inline void vf610_nfc_read_spare(struct mtd_info *mtd, void *buf,
+ int len)
+{
+ struct vf610_nfc *nfc = mtd_to_nfc(mtd);
+
+ len = min(mtd->oobsize, (uint)len);
+ if (len > 0)
+ vf610_nfc_memcpy(buf, nfc->regs + mtd->writesize, len);
+}
+
+/* Read data from NFC buffers */
+static void vf610_nfc_read_buf(struct mtd_info *mtd, u_char *buf, int len)
+{
+ struct vf610_nfc *nfc = mtd_to_nfc(mtd);
+ uint c = nfc->column;
+ uint l;
+
+ /* Handle main area */
+ if (!nfc->spareonly) {
+ l = min((uint)len, mtd->writesize - c);
+ nfc->column += l;
+
+ if (!nfc->alt_buf)
+ vf610_nfc_memcpy(buf, nfc->regs + NFC_MAIN_AREA(0) + c,
+ l);
+ else
+ if (nfc->alt_buf & ALT_BUF_ID)
+ *buf = vf610_nfc_get_id(mtd, c);
+ else
+ *buf = vf610_nfc_get_status(mtd);
+
+ buf += l;
+ len -= l;
+ }
+
+ /* Handle spare area access */
+ if (len) {
+ nfc->column += len;
+ vf610_nfc_read_spare(mtd, buf, len);
+ }
+}
+
+/* Write data to NFC buffers */
+static void vf610_nfc_write_buf(struct mtd_info *mtd, const u_char *buf,
+ int len)
+{
+ struct vf610_nfc *nfc = mtd_to_nfc(mtd);
+ uint c = nfc->column;
+ uint l;
+
+ l = min((uint)len, mtd->writesize + mtd->oobsize - c);
+ nfc->column += l;
+ vf610_nfc_memcpy(nfc->regs + NFC_MAIN_AREA(0) + c, buf, l);
+}
+
+/* Read byte from NFC buffers */
+static u8 vf610_nfc_read_byte(struct mtd_info *mtd)
+{
+ u8 tmp;
+ vf610_nfc_read_buf(mtd, &tmp, sizeof(tmp));
+ return tmp;
+}
+
+/* Read word from NFC buffers */
+static u16 vf610_nfc_read_word(struct mtd_info *mtd)
+{
+ u16 tmp;
+ vf610_nfc_read_buf(mtd, (u_char *)&tmp, sizeof(tmp));
+ return tmp;
+}
+
+/* If not provided, upper layers apply a fixed delay. */
+static int vf610_nfc_dev_ready(struct mtd_info *mtd)
+{
+ /* NFC handles R/B internally; always ready. */
+ return 1;
+}
+
+/*
+ * This function supports Vybrid only (MPC5125 would have full RB and four CS)
+ */
+static void vf610_nfc_select_chip(struct mtd_info *mtd, int chip)
+{
+#ifdef CONFIG_VF610
+ u32 tmp = vf610_nfc_read(mtd, NFC_ROW_ADDR);
+ tmp &= ~(ROW_ADDR_CHIP_SEL_RB_MASK | ROW_ADDR_CHIP_SEL_MASK);
+ tmp |= 1 << ROW_ADDR_CHIP_SEL_RB_SHIFT;
+
+ if (chip == 0)
+ tmp |= 1 << ROW_ADDR_CHIP_SEL_SHIFT;
+ else if (chip == 1)
+ tmp |= 2 << ROW_ADDR_CHIP_SEL_SHIFT;
+
+ vf610_nfc_write(mtd, NFC_ROW_ADDR, tmp);
+#endif
+}
+
+/* Count the number of 0's in buff upto max_bits */
+static inline int count_written_bits(uint8_t *buff, int size, int max_bits)
+{
+ uint32_t *buff32 = (uint32_t *)buff;
+ int k, written_bits = 0;
+
+ for (k = 0; k < (size / 4); k++) {
+ written_bits += hweight32(~buff32[k]);
+ if (written_bits > max_bits)
+ break;
+ }
+
+ return written_bits;
+}
+
+static inline int vf610_nfc_correct_data(struct mtd_info *mtd, u_char *dat)
+{
+ struct vf610_nfc *nfc = mtd_to_nfc(mtd);
+ u8 ecc_status;
+ u8 ecc_count;
+ int flip;
+
+ ecc_status = __raw_readb(nfc->regs + ECC_SRAM_ADDR * 8 + ECC_OFFSET);
+ ecc_count = ecc_status & ECC_ERR_COUNT;
+ if (!(ecc_status & ECC_STATUS_MASK))
+ return ecc_count;
+
+ /* If 'ecc_count' zero or less then buffer is all 0xff or erased. */
+ flip = count_written_bits(dat, nfc->chip.ecc.size, ecc_count);
+
+ /* ECC failed. */
+ if (flip > ecc_count) {
+ nfc->page = -1;
+ return -1;
+ }
+
+ /* Erased page. */
+ memset(dat, 0xff, nfc->chip.ecc.size);
+ return 0;
+}
+
+
+static int vf610_nfc_read_page(struct mtd_info *mtd, struct nand_chip *chip,
+ uint8_t *buf, int oob_required, int page)
+{
+ int eccsize = chip->ecc.size;
+ int stat;
+ uint8_t *p = buf;
+
+
+ vf610_nfc_read_buf(mtd, p, eccsize);
+
+ if (oob_required)
+ vf610_nfc_read_buf(mtd, chip->oob_poi, mtd->oobsize);
+
+ stat = vf610_nfc_correct_data(mtd, p);
+
+ if (stat < 0)
+ mtd->ecc_stats.failed++;
+ else
+ mtd->ecc_stats.corrected += stat;
+
+ return 0;
+}
+
+/*
+ * ECC will be calculated automatically
+ */
+static int vf610_nfc_write_page(struct mtd_info *mtd, struct nand_chip *chip,
+ const uint8_t *buf, int oob_required)
+{
+ vf610_nfc_write_buf(mtd, buf, mtd->writesize);
+ if (oob_required)
+ vf610_nfc_write_buf(mtd, chip->oob_poi, mtd->oobsize);
+
+ return 0;
+}
+
+struct vf610_nfc_config {
+ int hardware_ecc;
+ int width;
+ int flash_bbt;
+};
+
+static int vf610_nfc_nand_init(int devnum, void __iomem *addr)
+{
+ struct mtd_info *mtd = &nand_info[devnum];
+ struct nand_chip *chip;
+ struct vf610_nfc *nfc;
+ int err = 0;
+ int page_sz;
+ struct vf610_nfc_config cfg = {
+ .hardware_ecc = 1,
+#ifdef CONFIG_SYS_NAND_BUSWIDTH_16BIT
+ .width = 16,
+#else
+ .width = 8,
+#endif
+ .flash_bbt = 1,
+ };
+
+ nfc = malloc(sizeof(*nfc));
+ if (!nfc) {
+ printf(KERN_ERR "%s: Memory exhausted!\n", __func__);
+ return -ENOMEM;
+ }
+
+ chip = &nfc->chip;
+ nfc->regs = addr;
+
+ mtd->priv = chip;
+ chip->priv = nfc;
+
+ if (cfg.width == 16) {
+ chip->options |= NAND_BUSWIDTH_16;
+ vf610_nfc_set(mtd, NFC_FLASH_CONFIG, CONFIG_16BIT);
+ } else {
+ chip->options &= ~NAND_BUSWIDTH_16;
+ vf610_nfc_clear(mtd, NFC_FLASH_CONFIG, CONFIG_16BIT);
+ }
+
+ chip->dev_ready = vf610_nfc_dev_ready;
+ chip->cmdfunc = vf610_nfc_command;
+ chip->read_byte = vf610_nfc_read_byte;
+ chip->read_word = vf610_nfc_read_word;
+ chip->read_buf = vf610_nfc_read_buf;
+ chip->write_buf = vf610_nfc_write_buf;
+ chip->select_chip = vf610_nfc_select_chip;
+
+ /* Bad block options. */
+ if (cfg.flash_bbt)
+ chip->bbt_options = NAND_BBT_USE_FLASH | NAND_BBT_CREATE;
+
+ /* Default to software ECC until flash ID. */
+ vf610_nfc_set_field(mtd, NFC_FLASH_CONFIG,
+ CONFIG_ECC_MODE_MASK,
+ CONFIG_ECC_MODE_SHIFT, ECC_BYPASS);
+
+ chip->bbt_td = &bbt_main_descr;
+ chip->bbt_md = &bbt_mirror_descr;
+
+ page_sz = PAGE_2K + OOB_64;
+ page_sz += cfg.width == 16 ? 1 : 0;
+ vf610_nfc_write(mtd, NFC_SECTOR_SIZE, page_sz);
+
+ /* Set configuration register. */
+ vf610_nfc_clear(mtd, NFC_FLASH_CONFIG, CONFIG_ADDR_AUTO_INCR_BIT);
+ vf610_nfc_clear(mtd, NFC_FLASH_CONFIG, CONFIG_BUFNO_AUTO_INCR_BIT);
+ vf610_nfc_clear(mtd, NFC_FLASH_CONFIG, CONFIG_BOOT_MODE_BIT);
+ vf610_nfc_clear(mtd, NFC_FLASH_CONFIG, CONFIG_DMA_REQ_BIT);
+ vf610_nfc_set(mtd, NFC_FLASH_CONFIG, CONFIG_FAST_FLASH_BIT);
+
+ /* Enable Idle IRQ */
+ vf610_nfc_set(mtd, NFC_IRQ_STATUS, IDLE_EN_BIT);
+
+ /* PAGE_CNT = 1 */
+ vf610_nfc_set_field(mtd, NFC_FLASH_CONFIG, CONFIG_PAGE_CNT_MASK,
+ CONFIG_PAGE_CNT_SHIFT, 1);
+
+ /* Set ECC_STATUS offset */
+ vf610_nfc_set_field(mtd, NFC_FLASH_CONFIG,
+ CONFIG_ECC_SRAM_ADDR_MASK,
+ CONFIG_ECC_SRAM_ADDR_SHIFT, ECC_SRAM_ADDR);
+
+ /* first scan to find the device and get the page size */
+ if (nand_scan_ident(mtd, CONFIG_SYS_MAX_NAND_DEVICE, NULL)) {
+ err = -ENXIO;
+ goto error;
+ }
+
+ chip->ecc.mode = NAND_ECC_SOFT; /* default */
+
+ page_sz = mtd->writesize + mtd->oobsize;
+
+ /* Single buffer only, max 256 OOB minus ECC status */
+ if (page_sz > PAGE_2K + 256 - 8) {
+ dev_err(nfc->dev, "Unsupported flash size\n");
+ err = -ENXIO;
+ goto error;
+ }
+ page_sz += cfg.width == 16 ? 1 : 0;
+ vf610_nfc_write(mtd, NFC_SECTOR_SIZE, page_sz);
+
+ if (cfg.hardware_ecc) {
+ if (mtd->writesize != PAGE_2K && mtd->oobsize < 64) {
+ dev_err(nfc->dev, "Unsupported flash with hwecc\n");
+ err = -ENXIO;
+ goto error;
+ }
+
+ chip->ecc.layout = &vf610_nfc_ecc45;
+
+ /* propagate ecc.layout to mtd_info */
+ mtd->ecclayout = chip->ecc.layout;
+ chip->ecc.read_page = vf610_nfc_read_page;
+ chip->ecc.write_page = vf610_nfc_write_page;
+ chip->ecc.mode = NAND_ECC_HW;
+
+ chip->ecc.bytes = 45;
+ chip->ecc.size = PAGE_2K;
+ chip->ecc.strength = 24;
+
+ /* set ECC mode to 45 bytes OOB with 24 bits correction */
+ vf610_nfc_set_field(mtd, NFC_FLASH_CONFIG,
+ CONFIG_ECC_MODE_MASK,
+ CONFIG_ECC_MODE_SHIFT, ECC_45_BYTE);
+
+ /* Enable ECC_STATUS */
+ vf610_nfc_set(mtd, NFC_FLASH_CONFIG, CONFIG_ECC_SRAM_REQ_BIT);
+ }
+
+ /* second phase scan */
+ err = nand_scan_tail(mtd);
+ if (err)
+ return err;
+
+ err = nand_register(devnum);
+ if (err)
+ return err;
+
+ return 0;
+
+error:
+ return err;
+}
+
+void board_nand_init(void)
+{
+ int err = vf610_nfc_nand_init(0, (void __iomem *)CONFIG_SYS_NAND_BASE);
+ if (err)
+ printf("VF610 NAND init failed (err %d)\n", err);
+}
diff --git a/drivers/net/macb.c b/drivers/net/macb.c
index 01a94a4..375c8a4 100644
--- a/drivers/net/macb.c
+++ b/drivers/net/macb.c
@@ -479,31 +479,22 @@
/* First check for GMAC */
if (macb_is_gem(macb)) {
lpa = macb_mdio_read(macb, MII_STAT1000);
- if (lpa & (1 << 11)) {
- speed = 1000;
- duplex = 1;
- } else {
- if (lpa & (1 << 10)) {
- speed = 1000;
- duplex = 1;
- } else {
- speed = 0;
- }
- }
- if (speed == 1000) {
- printf("%s: link up, %dMbps %s-duplex (lpa: 0x%04x)\n",
+ if (lpa & (LPA_1000FULL | LPA_1000HALF)) {
+ duplex = ((lpa & LPA_1000FULL) ? 1 : 0);
+
+ printf("%s: link up, 1000Mbps %s-duplex (lpa: 0x%04x)\n",
netdev->name,
- speed,
duplex ? "full" : "half",
lpa);
ncfgr = macb_readl(macb, NCFGR);
- ncfgr &= ~(GEM_BIT(GBE) | MACB_BIT(SPD) | MACB_BIT(FD));
- if (speed)
- ncfgr |= GEM_BIT(GBE);
+ ncfgr &= ~(MACB_BIT(SPD) | MACB_BIT(FD));
+ ncfgr |= GEM_BIT(GBE);
+
if (duplex)
ncfgr |= MACB_BIT(FD);
+
macb_writel(macb, NCFGR, ncfgr);
return 1;
diff --git a/drivers/power/pmic/Makefile b/drivers/power/pmic/Makefile
index a472f61..e7b07eb 100644
--- a/drivers/power/pmic/Makefile
+++ b/drivers/power/pmic/Makefile
@@ -11,7 +11,8 @@
obj-$(CONFIG_POWER_MUIC_MAX8997) += muic_max8997.o
obj-$(CONFIG_POWER_MAX77686) += pmic_max77686.o
obj-$(CONFIG_POWER_PFUZE100) += pmic_pfuze100.o
-obj-$(CONFIG_POWER_TPS65090) += pmic_tps65090.o
+obj-$(CONFIG_POWER_TPS65090_I2C) += pmic_tps65090.o
+obj-$(CONFIG_POWER_TPS65090_EC) += pmic_tps65090_ec.o
obj-$(CONFIG_POWER_TPS65217) += pmic_tps65217.o
obj-$(CONFIG_POWER_TPS65218) += pmic_tps65218.o
obj-$(CONFIG_POWER_TPS65910) += pmic_tps65910.o
diff --git a/drivers/power/pmic/pmic_tps65090_ec.c b/drivers/power/pmic/pmic_tps65090_ec.c
new file mode 100644
index 0000000..ac0d44f
--- /dev/null
+++ b/drivers/power/pmic/pmic_tps65090_ec.c
@@ -0,0 +1,218 @@
+/*
+ * Copyright (c) 2013 The Chromium OS Authors.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <cros_ec.h>
+#include <errno.h>
+#include <power/tps65090_pmic.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#define TPS65090_ADDR 0x48
+
+static struct tps65090 {
+ struct cros_ec_dev *dev; /* The CROS_EC device */
+} config;
+
+/* TPS65090 register addresses */
+enum {
+ REG_IRQ1 = 0,
+ REG_CG_CTRL0 = 4,
+ REG_CG_STATUS1 = 0xa,
+ REG_FET1_CTRL = 0x0f,
+ REG_FET2_CTRL,
+ REG_FET3_CTRL,
+ REG_FET4_CTRL,
+ REG_FET5_CTRL,
+ REG_FET6_CTRL,
+ REG_FET7_CTRL,
+ TPS65090_NUM_REGS,
+};
+
+enum {
+ IRQ1_VBATG = 1 << 3,
+ CG_CTRL0_ENC_MASK = 0x01,
+
+ MAX_FET_NUM = 7,
+ MAX_CTRL_READ_TRIES = 5,
+
+ /* TPS65090 FET_CTRL register values */
+ FET_CTRL_TOFET = 1 << 7, /* Timeout, startup, overload */
+ FET_CTRL_PGFET = 1 << 4, /* Power good for FET status */
+ FET_CTRL_WAIT = 3 << 2, /* Overcurrent timeout max */
+ FET_CTRL_ADENFET = 1 << 1, /* Enable output auto discharge */
+ FET_CTRL_ENFET = 1 << 0, /* Enable FET */
+};
+
+/**
+ * tps65090_read - read a byte from tps6090
+ *
+ * @param reg The register address to read from.
+ * @param val We'll return value value read here.
+ * @return 0 if ok; error if EC returns failure.
+ */
+static int tps65090_read(u32 reg, u8 *val)
+{
+ return cros_ec_i2c_xfer(config.dev, TPS65090_ADDR, reg, 1,
+ val, 1, true);
+}
+
+/**
+ * tps65090_write - write a byte to tps6090
+ *
+ * @param reg The register address to write to.
+ * @param val The value to write.
+ * @return 0 if ok; error if EC returns failure.
+ */
+static int tps65090_write(u32 reg, u8 val)
+{
+ return cros_ec_i2c_xfer(config.dev, TPS65090_ADDR, reg, 1,
+ &val, 1, false);
+}
+
+/**
+ * Checks for a valid FET number
+ *
+ * @param fet_id FET number to check
+ * @return 0 if ok, -EINVAL if FET value is out of range
+ */
+static int tps65090_check_fet(unsigned int fet_id)
+{
+ if (fet_id == 0 || fet_id > MAX_FET_NUM) {
+ debug("parameter fet_id is out of range, %u not in 1 ~ %u\n",
+ fet_id, MAX_FET_NUM);
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+/**
+ * Set the power state for a FET
+ *
+ * @param fet_id Fet number to set (1..MAX_FET_NUM)
+ * @param set 1 to power on FET, 0 to power off
+ * @return -EIO if we got a comms error, -EAGAIN if the FET failed to
+ * change state. If all is ok, returns 0.
+ */
+static int tps65090_fet_set(int fet_id, bool set)
+{
+ int retry;
+ u8 reg, value;
+
+ value = FET_CTRL_ADENFET | FET_CTRL_WAIT;
+ if (set)
+ value |= FET_CTRL_ENFET;
+
+ if (tps65090_write(REG_FET1_CTRL + fet_id - 1, value))
+ return -EIO;
+
+ /* Try reading until we get a result */
+ for (retry = 0; retry < MAX_CTRL_READ_TRIES; retry++) {
+ if (tps65090_read(REG_FET1_CTRL + fet_id - 1, ®))
+ return -EIO;
+
+ /* Check that the fet went into the expected state */
+ if (!!(reg & FET_CTRL_PGFET) == set)
+ return 0;
+
+ /* If we got a timeout, there is no point in waiting longer */
+ if (reg & FET_CTRL_TOFET)
+ break;
+
+ mdelay(1);
+ }
+
+ debug("FET %d: Power good should have set to %d but reg=%#02x\n",
+ fet_id, set, reg);
+ return -EAGAIN;
+}
+
+int tps65090_fet_enable(unsigned int fet_id)
+{
+ ulong start;
+ int loops;
+ int ret;
+
+ ret = tps65090_check_fet(fet_id);
+ if (ret)
+ return ret;
+
+ start = get_timer(0);
+ for (loops = 0;; loops++) {
+ ret = tps65090_fet_set(fet_id, true);
+ if (!ret)
+ break;
+
+ if (get_timer(start) > 100)
+ break;
+
+ /* Turn it off and try again until we time out */
+ tps65090_fet_set(fet_id, false);
+ }
+
+ if (ret) {
+ debug("%s: FET%d failed to power on: time=%lums, loops=%d\n",
+ __func__, fet_id, get_timer(start), loops);
+ } else if (loops) {
+ debug("%s: FET%d powered on after %lums, loops=%d\n",
+ __func__, fet_id, get_timer(start), loops);
+ }
+ /*
+ * Unfortunately, there are some conditions where the power
+ * good bit will be 0, but the fet still comes up. One such
+ * case occurs with the lcd backlight. We'll just return 0 here
+ * and assume that the fet will eventually come up.
+ */
+ if (ret == -EAGAIN)
+ ret = 0;
+
+ return ret;
+}
+
+int tps65090_fet_disable(unsigned int fet_id)
+{
+ int ret;
+
+ ret = tps65090_check_fet(fet_id);
+ if (ret)
+ return ret;
+
+ ret = tps65090_fet_set(fet_id, false);
+
+ return ret;
+}
+
+int tps65090_fet_is_enabled(unsigned int fet_id)
+{
+ u8 reg = 0;
+ int ret;
+
+ ret = tps65090_check_fet(fet_id);
+ if (ret)
+ return ret;
+ ret = tps65090_read(REG_FET1_CTRL + fet_id - 1, ®);
+ if (ret) {
+ debug("fail to read FET%u_CTRL register over I2C", fet_id);
+ return -EIO;
+ }
+
+ return reg & FET_CTRL_ENFET;
+}
+
+int tps65090_init(void)
+{
+ puts("TPS65090 PMIC EC init\n");
+
+ config.dev = board_get_cros_ec_dev();
+ if (!config.dev) {
+ debug("%s: no cros_ec device: cannot init tps65090\n",
+ __func__);
+ return -ENODEV;
+ }
+
+ return 0;
+}
diff --git a/drivers/usb/host/ehci-mx6.c b/drivers/usb/host/ehci-mx6.c
index c0a557b..9ec5a0a 100644
--- a/drivers/usb/host/ehci-mx6.c
+++ b/drivers/usb/host/ehci-mx6.c
@@ -174,7 +174,7 @@
static void usb_oc_config(int index)
{
- struct usbnc_regs *usbnc = (struct usbnc_regs *)(USBOH3_USB_BASE_ADDR +
+ struct usbnc_regs *usbnc = (struct usbnc_regs *)(USB_BASE_ADDR +
USB_OTHERREGS_OFFSET);
void __iomem *ctrl = (void __iomem *)(&usbnc->ctrl[index]);
u32 val;
@@ -207,7 +207,7 @@
struct ehci_hccr **hccr, struct ehci_hcor **hcor)
{
enum usb_init_type type;
- struct usb_ehci *ehci = (struct usb_ehci *)(USBOH3_USB_BASE_ADDR +
+ struct usb_ehci *ehci = (struct usb_ehci *)(USB_BASE_ADDR +
(0x200 * index));
if (index > 3)
diff --git a/drivers/usb/host/ehci-mxs.c b/drivers/usb/host/ehci-mxs.c
index 4d652b3..6b8d969 100644
--- a/drivers/usb/host/ehci-mxs.c
+++ b/drivers/usb/host/ehci-mxs.c
@@ -77,6 +77,16 @@
return 0;
}
+int __weak board_ehci_hcd_init(int port)
+{
+ return 0;
+}
+
+int __weak board_ehci_hcd_exit(int port)
+{
+ return 0;
+}
+
int ehci_hcd_init(int index, enum usb_init_type init,
struct ehci_hccr **hccr, struct ehci_hcor **hcor)
{
@@ -90,6 +100,10 @@
return -EINVAL;
}
+ ret = board_ehci_hcd_init(index);
+ if (ret)
+ return ret;
+
port = &mxs_port[index];
/* Reset the PHY block */
@@ -154,5 +168,7 @@
/* Disable USB clock */
ret = ehci_mxs_toggle_clock(port, 0);
+ board_ehci_hcd_exit(index);
+
return ret;
}
diff --git a/include/configs/arndale.h b/include/configs/arndale.h
index 43077cf..f9ee40f 100644
--- a/include/configs/arndale.h
+++ b/include/configs/arndale.h
@@ -9,109 +9,19 @@
#ifndef __CONFIG_ARNDALE_H
#define __CONFIG_ARNDALE_H
-/* High Level Configuration Options */
-#define CONFIG_SAMSUNG /* in a SAMSUNG core */
-#define CONFIG_S5P /* S5P Family */
-#define CONFIG_EXYNOS5 /* which is in a Exynos5 Family */
-#define CONFIG_EXYNOS5250
-
-#include <asm/arch/cpu.h> /* get chip and board defs */
-
-#define CONFIG_SYS_GENERIC_BOARD
-#define CONFIG_ARCH_CPU_INIT
-#define CONFIG_DISPLAY_CPUINFO
-#define CONFIG_DISPLAY_BOARDINFO
-
-
-/* Allow tracing to be enabled */
-#define CONFIG_TRACE
-#define CONFIG_CMD_TRACE
-#define CONFIG_TRACE_BUFFER_SIZE (16 << 20)
-#define CONFIG_TRACE_EARLY_SIZE (8 << 20)
-#define CONFIG_TRACE_EARLY
-#define CONFIG_TRACE_EARLY_ADDR 0x50000000
-
-/* Keep L2 Cache Disabled */
-#define CONFIG_SYS_DCACHE_OFF
-
-#define CONFIG_SYS_SDRAM_BASE 0x40000000
-#define CONFIG_SYS_TEXT_BASE 0x43E00000
-
-/* input clock of PLL: SMDK5250 has 24MHz input clock */
-#define CONFIG_SYS_CLK_FREQ 24000000
-
-#define CONFIG_SETUP_MEMORY_TAGS
-#define CONFIG_CMDLINE_TAG
-#define CONFIG_INITRD_TAG
-#define CONFIG_CMDLINE_EDITING
-
-/* Power Down Modes */
-#define S5P_CHECK_SLEEP 0x00000BAD
-#define S5P_CHECK_DIDLE 0xBAD00000
-#define S5P_CHECK_LPA 0xABAD0000
-
-/* Offset for inform registers */
-#define INFORM0_OFFSET 0x800
-#define INFORM1_OFFSET 0x804
-
-/* Size of malloc() pool */
-#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (4 << 20))
-
-/* select serial console configuration */
-#define CONFIG_BAUDRATE 115200
-#define EXYNOS5_DEFAULT_UART_OFFSET 0x010000
-#define CONFIG_SILENT_CONSOLE
-
-/* Console configuration */
-#define CONFIG_CONSOLE_MUX
-#define CONFIG_SYS_CONSOLE_IS_IN_ENV
-#define EXYNOS_DEVICE_SETTINGS \
- "stdin=serial\0" \
- "stdout=serial\0" \
- "stderr=serial\0"
-
-#define CONFIG_EXTRA_ENV_SETTINGS \
- EXYNOS_DEVICE_SETTINGS
+#include "exynos5250-common.h"
/* SD/MMC configuration */
-#define CONFIG_GENERIC_MMC
-#define CONFIG_MMC
-#define CONFIG_SDHCI
-#define CONFIG_S5P_SDHCI
-#define CONFIG_DWMMC
-#define CONFIG_EXYNOS_DWMMC
#define CONFIG_SUPPORT_EMMC_BOOT
-#define CONFIG_BOUNCE_BUFFER
-
-
-#define CONFIG_BOARD_EARLY_INIT_F
-#define CONFIG_SKIP_LOWLEVEL_INIT
-
-/* PWM */
-#define CONFIG_PWM
/* allow to overwrite serial and ethaddr */
#define CONFIG_ENV_OVERWRITE
-/* Command definition*/
-#include <config_cmd_default.h>
-
-#define CONFIG_CMD_PING
-#define CONFIG_CMD_ELF
-#define CONFIG_CMD_MMC
#define CONFIG_CMD_EXT2
-#define CONFIG_CMD_FAT
-#define CONFIG_CMD_NET
-#define CONFIG_CMD_HASH
-
-#define CONFIG_BOOTDELAY 3
-#define CONFIG_ZERO_BOOTDELAY_CHECK
/* USB */
-#define CONFIG_CMD_USB
#define CONFIG_USB_EHCI
#define CONFIG_USB_EHCI_EXYNOS
-#define CONFIG_USB_STORAGE
#define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 3
#define CONFIG_USB_HOST_ETHER
@@ -119,106 +29,23 @@
/* MMC SPL */
#define CONFIG_EXYNOS_SPL
-#define COPY_BL2_FNPTR_ADDR 0x02020030
-
-#define CONFIG_SPL_LIBCOMMON_SUPPORT
-
-/* specific .lds file */
-#define CONFIG_SPL_LDSCRIPT "board/samsung/common/exynos-uboot-spl.lds"
-#define CONFIG_SPL_TEXT_BASE 0x02023400
-#define CONFIG_SPL_MAX_FOOTPRINT (14 * 1024)
-
-#define CONFIG_BOOTCOMMAND "mmc read 40007000 451 2000; bootm 40007000"
/* Miscellaneous configurable options */
-#define CONFIG_SYS_LONGHELP /* undef to save memory */
-#define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */
#define CONFIG_SYS_PROMPT "ARNDALE # "
-#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
-#define CONFIG_SYS_PBSIZE 384 /* Print Buffer Size */
-#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
#define CONFIG_DEFAULT_CONSOLE "console=ttySAC2,115200n8\0"
-/* Boot Argument Buffer Size */
-#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
-/* memtest works on */
-#define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE
-#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_SDRAM_BASE + 0x5E00000)
-#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + 0x3E00000)
-
-#define CONFIG_RD_LVL
#define CONFIG_NR_DRAM_BANKS 8
#define SDRAM_BANK_SIZE (256UL << 20UL) /* 256 MB */
-#define PHYS_SDRAM_1 CONFIG_SYS_SDRAM_BASE
-#define PHYS_SDRAM_1_SIZE SDRAM_BANK_SIZE
-#define PHYS_SDRAM_2 (CONFIG_SYS_SDRAM_BASE + SDRAM_BANK_SIZE)
-#define PHYS_SDRAM_2_SIZE SDRAM_BANK_SIZE
-#define PHYS_SDRAM_3 (CONFIG_SYS_SDRAM_BASE + (2 * SDRAM_BANK_SIZE))
-#define PHYS_SDRAM_3_SIZE SDRAM_BANK_SIZE
-#define PHYS_SDRAM_4 (CONFIG_SYS_SDRAM_BASE + (3 * SDRAM_BANK_SIZE))
-#define PHYS_SDRAM_4_SIZE SDRAM_BANK_SIZE
-#define PHYS_SDRAM_5 (CONFIG_SYS_SDRAM_BASE + (4 * SDRAM_BANK_SIZE))
-#define PHYS_SDRAM_5_SIZE SDRAM_BANK_SIZE
-#define PHYS_SDRAM_6 (CONFIG_SYS_SDRAM_BASE + (5 * SDRAM_BANK_SIZE))
-#define PHYS_SDRAM_6_SIZE SDRAM_BANK_SIZE
-#define PHYS_SDRAM_7 (CONFIG_SYS_SDRAM_BASE + (6 * SDRAM_BANK_SIZE))
-#define PHYS_SDRAM_7_SIZE SDRAM_BANK_SIZE
-#define PHYS_SDRAM_8 (CONFIG_SYS_SDRAM_BASE + (7 * SDRAM_BANK_SIZE))
-#define PHYS_SDRAM_8_SIZE SDRAM_BANK_SIZE
-#define CONFIG_SYS_MONITOR_BASE 0x00000000
-
-/* FLASH and environment organization */
-#define CONFIG_SYS_NO_FLASH
-#undef CONFIG_CMD_IMLS
#define CONFIG_IDENT_STRING " for ARNDALE"
-#define CONFIG_SYS_MMC_ENV_DEV 0
-
#define CONFIG_ENV_IS_IN_MMC
-#define CONFIG_SECURE_BL1_ONLY
-
-/* Secure FW size configuration */
-#ifdef CONFIG_SECURE_BL1_ONLY
-#define CONFIG_SEC_FW_SIZE (8 << 10) /* 8KB */
-#else
-#define CONFIG_SEC_FW_SIZE 0
-#endif
-
-/* Configuration of BL1, BL2, ENV Blocks on mmc */
-#define CONFIG_RES_BLOCK_SIZE (512)
-#define CONFIG_BL1_SIZE (16 << 10) /*16 K reserved for BL1*/
-#define CONFIG_BL2_SIZE (512UL << 10UL) /* 512 KB */
-#define CONFIG_ENV_SIZE (16 << 10) /* 16 KB */
-
-#define CONFIG_BL1_OFFSET (CONFIG_RES_BLOCK_SIZE + CONFIG_SEC_FW_SIZE)
-#define CONFIG_BL2_OFFSET (CONFIG_BL1_OFFSET + CONFIG_BL1_SIZE)
#define CONFIG_ENV_OFFSET (CONFIG_BL2_OFFSET + CONFIG_BL2_SIZE)
-/* U-boot copy size from boot Media to DRAM.*/
-#define BL2_START_OFFSET (CONFIG_BL2_OFFSET/512)
-#define BL2_SIZE_BLOC_COUNT (CONFIG_BL2_SIZE/512)
-
-#define CONFIG_DOS_PARTITION
-#define CONFIG_EFI_PARTITION
-#define CONFIG_CMD_PART
-#define CONFIG_PARTITION_UUIDS
-
-
#define CONFIG_IRAM_STACK 0x02050000
#define CONFIG_SYS_INIT_SP_ADDR CONFIG_IRAM_STACK
-/* I2C */
-#define CONFIG_SYS_I2C_INIT_BOARD
-#define CONFIG_SYS_I2C
-#define CONFIG_CMD_I2C
-#define CONFIG_SYS_I2C_S3C24X0_SPEED 100000 /* 100 Kbps */
-#define CONFIG_SYS_I2C_S3C24X0
-#define CONFIG_MAX_I2C_NUM 8
-#define CONFIG_SYS_I2C_S3C24X0_SLAVE 0x0
-#define CONFIG_I2C_EDID
-
/* PMIC */
#define CONFIG_PMIC
#define CONFIG_POWER_I2C
@@ -227,26 +54,6 @@
#define CONFIG_PREBOOT
-/* Ethernet Controllor Driver */
-#ifdef CONFIG_CMD_NET
-#define CONFIG_SMC911X
-#define CONFIG_SMC911X_BASE 0x5000000
-#define CONFIG_SMC911X_16_BIT
-#define CONFIG_ENV_SROM_BANK 1
-#endif /*CONFIG_CMD_NET*/
-
-/* Enable PXE Support */
-#ifdef CONFIG_CMD_NET
-#define CONFIG_CMD_PXE
-#define CONFIG_MENU
-#endif
-
-/* Enable devicetree support */
-#define CONFIG_OF_LIBFDT
-
-/* Enable Time Command */
-#define CONFIG_CMD_TIME
-
#define CONFIG_S5P_PA_SYSRAM 0x02020000
#define CONFIG_SMP_PEN_ADDR CONFIG_S5P_PA_SYSRAM
diff --git a/include/configs/at91sam9263ek.h b/include/configs/at91sam9263ek.h
index 48c12ea..b666d94 100644
--- a/include/configs/at91sam9263ek.h
+++ b/include/configs/at91sam9263ek.h
@@ -48,6 +48,8 @@
#define CONFIG_CMD_BOOTZ
#define CONFIG_OF_LIBFDT
+#define CONFIG_SYS_GENERIC_BOARD
+
/*
* Hardware drivers
*/
diff --git a/include/configs/cm_fx6.h b/include/configs/cm_fx6.h
index 10d02b4..7cf241e 100644
--- a/include/configs/cm_fx6.h
+++ b/include/configs/cm_fx6.h
@@ -222,7 +222,6 @@
#define CONFIG_MII
#define CONFIG_ETHPRIME "FEC0"
#define CONFIG_ARP_TIMEOUT 200UL
-#define CONFIG_NETMASK 255.255.255.0
#define CONFIG_NET_RETRY_COUNT 5
/* USB */
diff --git a/include/configs/corvus.h b/include/configs/corvus.h
index 6171060..eb1584d 100644
--- a/include/configs/corvus.h
+++ b/include/configs/corvus.h
@@ -18,6 +18,8 @@
#define MACH_TYPE_CORVUS 2066
+#define CONFIG_SYS_GENERIC_BOARD
+
/*
* Warning: changing CONFIG_SYS_TEXT_BASE requires
* adapting the initial boot program.
diff --git a/include/configs/exynos-common.h b/include/configs/exynos-common.h
new file mode 100644
index 0000000..371f32d
--- /dev/null
+++ b/include/configs/exynos-common.h
@@ -0,0 +1,91 @@
+/*
+ * Copyright (C) 2013 Samsung Electronics
+ *
+ * Common configuration settings for the SAMSUNG EXYNOS boards.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef __EXYNOS_COMMON_H
+#define __EXYNOS_COMMON_H
+
+/* High Level Configuration Options */
+#define CONFIG_SAMSUNG /* in a SAMSUNG core */
+#define CONFIG_S5P /* S5P Family */
+
+#include <asm/arch/cpu.h> /* get chip and board defs */
+#include <linux/sizes.h>
+
+#define CONFIG_SYS_GENERIC_BOARD
+#define CONFIG_ARCH_CPU_INIT
+#define CONFIG_DISPLAY_CPUINFO
+#define CONFIG_DISPLAY_BOARDINFO
+#define CONFIG_SKIP_LOWLEVEL_INIT
+#define CONFIG_BOARD_EARLY_INIT_F
+
+/* Enable fdt support */
+#define CONFIG_OF_LIBFDT
+
+/* Keep L2 Cache Disabled */
+#define CONFIG_CMD_CACHE
+
+/* input clock of PLL: 24MHz input clock */
+#define CONFIG_SYS_CLK_FREQ 24000000
+
+#define CONFIG_SETUP_MEMORY_TAGS
+#define CONFIG_CMDLINE_TAG
+#define CONFIG_INITRD_TAG
+#define CONFIG_CMDLINE_EDITING
+#define CONFIG_ENV_OVERWRITE
+
+/* Size of malloc() pool before and after relocation */
+#define CONFIG_SYS_MALLOC_F_LEN (1 << 10)
+#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (80 << 20))
+
+/* select serial console configuration */
+#define CONFIG_BAUDRATE 115200
+
+/* SD/MMC configuration */
+#define CONFIG_GENERIC_MMC
+#define CONFIG_MMC
+#define CONFIG_S5P_SDHCI
+#define CONFIG_SDHCI
+#define CONFIG_DWMMC
+#define CONFIG_EXYNOS_DWMMC
+#define CONFIG_BOUNCE_BUFFER
+
+#define CONFIG_BOOTDELAY 3
+#define CONFIG_ZERO_BOOTDELAY_CHECK
+
+/* PWM */
+#define CONFIG_PWM
+
+/* Command definition*/
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_MMC
+#define CONFIG_CMD_EXT4
+#define CONFIG_CMD_EXT4_WRITE
+#define CONFIG_CMD_FAT
+#define CONFIG_FAT_WRITE
+
+#define CONFIG_DOS_PARTITION
+#define CONFIG_EFI_PARTITION
+#define CONFIG_CMD_PART
+#define CONFIG_PARTITION_UUIDS
+
+/* Miscellaneous configurable options */
+#define CONFIG_SYS_LONGHELP /* undef to save memory */
+#define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */
+#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
+#define CONFIG_SYS_PBSIZE 384 /* Print Buffer Size */
+#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
+
+/* Boot Argument Buffer Size */
+#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
+
+/* FLASH and environment organization */
+#define CONFIG_SYS_NO_FLASH
+#undef CONFIG_CMD_IMLS
+
+#endif /* __CONFIG_H */
diff --git a/include/configs/exynos4-common.h b/include/configs/exynos4-common.h
new file mode 100644
index 0000000..89ba14e
--- /dev/null
+++ b/include/configs/exynos4-common.h
@@ -0,0 +1,68 @@
+/*
+ * Copyright (C) 2014 Samsung Electronics
+ *
+ * Configuration settings for the SAMSUNG EXYNOS5 board.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef __CONFIG_EXYNOS4_COMMON_H
+#define __CONFIG_EXYNOS4_COMMON_H
+
+#define CONFIG_EXYNOS4 /* Exynos4 Family */
+
+#include "exynos-common.h"
+
+#define CONFIG_BOARD_COMMON
+
+#define CONFIG_SYS_CACHELINE_SIZE 32
+#define CONFIG_REVISION_TAG
+
+/* SD/MMC configuration */
+#define CONFIG_MMC_SDMA
+#define CONFIG_MMC_DEFAULT_DEV 0
+
+#undef CONFIG_CMD_FPGA
+#undef CONFIG_CMD_MISC
+#undef CONFIG_CMD_NET
+#undef CONFIG_CMD_NFS
+#undef CONFIG_CMD_XIMG
+#undef CONFIG_CMD_ONENAND
+#undef CONFIG_CMD_MTDPARTS
+#define CONFIG_CMD_DFU
+#define CONFIG_CMD_GPT
+#define CONFIG_CMD_PMIC
+#define CONFIG_CMD_SETEXPR
+
+/* USB Composite download gadget - g_dnl */
+#define CONFIG_USBDOWNLOAD_GADGET
+
+/* TIZEN THOR downloader support */
+#define CONFIG_CMD_THOR_DOWNLOAD
+#define CONFIG_THOR_FUNCTION
+
+#define CONFIG_DFU_FUNCTION
+#define CONFIG_DFU_MMC
+#define CONFIG_SYS_DFU_DATA_BUF_SIZE SZ_32M
+#define DFU_DEFAULT_POLL_TIMEOUT 300
+
+/* USB Samsung's IDs */
+#define CONFIG_G_DNL_VENDOR_NUM 0x04E8
+#define CONFIG_G_DNL_PRODUCT_NUM 0x6601
+#define CONFIG_G_DNL_THOR_VENDOR_NUM CONFIG_G_DNL_VENDOR_NUM
+#define CONFIG_G_DNL_THOR_PRODUCT_NUM 0x685D
+#define CONFIG_G_DNL_UMS_VENDOR_NUM 0x0525
+#define CONFIG_G_DNL_UMS_PRODUCT_NUM 0xA4A5
+#define CONFIG_G_DNL_MANUFACTURER "Samsung"
+
+#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 2 sectors */
+
+#define CONFIG_USB_GADGET
+#define CONFIG_USB_GADGET_S3C_UDC_OTG
+#define CONFIG_USB_GADGET_DUALSPEED
+#define CONFIG_USB_GADGET_VBUS_DRAW 2
+
+#define CONFIG_CMD_USB_MASS_STORAGE
+#define CONFIG_USB_GADGET_MASS_STORAGE
+
+#endif /* __CONFIG_EXYNOS4_COMMON_H */
diff --git a/include/configs/exynos4-dt.h b/include/configs/exynos4-dt.h
deleted file mode 100644
index 99472ac..0000000
--- a/include/configs/exynos4-dt.h
+++ /dev/null
@@ -1,139 +0,0 @@
-/*
- * Copyright (C) 2014 Samsung Electronics
- *
- * Configuration settings for the SAMSUNG EXYNOS5 board.
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-/* High Level Configuration Options */
-#define CONFIG_SAMSUNG /* in a SAMSUNG core */
-#define CONFIG_S5P /* S5P Family */
-#define CONFIG_EXYNOS4 /* which is in a Exynos4 Family */
-
-#include <asm/arch/cpu.h> /* get chip and board defs */
-
-#define CONFIG_ARCH_CPU_INIT
-#define CONFIG_DISPLAY_CPUINFO
-#define CONFIG_DISPLAY_BOARDINFO
-#define CONFIG_BOARD_COMMON
-#define CONFIG_SYS_GENERIC_BOARD
-
-#define CONFIG_SYS_CACHELINE_SIZE 32
-
-/* input clock of PLL: EXYNOS4 boards have 24MHz input clock */
-#define CONFIG_SYS_CLK_FREQ 24000000
-
-#define CONFIG_SETUP_MEMORY_TAGS
-#define CONFIG_CMDLINE_TAG
-#define CONFIG_REVISION_TAG
-#define CONFIG_INITRD_TAG
-#define CONFIG_CMDLINE_EDITING
-
-#include <linux/sizes.h>
-
-/* SD/MMC configuration */
-#define CONFIG_GENERIC_MMC
-#define CONFIG_MMC
-#define CONFIG_S5P_SDHCI
-#define CONFIG_SDHCI
-#define CONFIG_MMC_SDMA
-#define CONFIG_DWMMC
-#define CONFIG_EXYNOS_DWMMC
-#define CONFIG_BOUNCE_BUFFER
-#define CONFIG_MMC_DEFAULT_DEV 0
-
-/* PWM */
-#define CONFIG_PWM
-
-#define CONFIG_BOARD_EARLY_INIT_F
-#define CONFIG_SKIP_LOWLEVEL_INIT
-
-/* allow to overwrite serial and ethaddr */
-#define CONFIG_ENV_OVERWRITE
-
-/* Command definition*/
-#include <config_cmd_default.h>
-
-#undef CONFIG_CMD_FPGA
-#undef CONFIG_CMD_MISC
-#undef CONFIG_CMD_NET
-#undef CONFIG_CMD_NFS
-#undef CONFIG_CMD_XIMG
-#undef CONFIG_CMD_CACHE
-#undef CONFIG_CMD_ONENAND
-#undef CONFIG_CMD_MTDPARTS
-#define CONFIG_CMD_CACHE
-#define CONFIG_CMD_MMC
-#define CONFIG_CMD_DFU
-#define CONFIG_CMD_GPT
-#define CONFIG_CMD_PMIC
-#define CONFIG_CMD_SETEXPR
-
-#define CONFIG_BOOTDELAY 3
-#define CONFIG_ZERO_BOOTDELAY_CHECK
-
-/* FAT */
-#define CONFIG_CMD_FAT
-#define CONFIG_FAT_WRITE
-
-/* EXT4 */
-#define CONFIG_CMD_EXT4
-#define CONFIG_CMD_EXT4_WRITE
-
-/* USB Composite download gadget - g_dnl */
-#define CONFIG_USBDOWNLOAD_GADGET
-
-/* TIZEN THOR downloader support */
-#define CONFIG_CMD_THOR_DOWNLOAD
-#define CONFIG_THOR_FUNCTION
-
-#define CONFIG_DFU_FUNCTION
-#define CONFIG_DFU_MMC
-#define CONFIG_SYS_DFU_DATA_BUF_SIZE SZ_32M
-#define DFU_DEFAULT_POLL_TIMEOUT 300
-
-/* USB Samsung's IDs */
-#define CONFIG_G_DNL_VENDOR_NUM 0x04E8
-#define CONFIG_G_DNL_PRODUCT_NUM 0x6601
-#define CONFIG_G_DNL_THOR_VENDOR_NUM CONFIG_G_DNL_VENDOR_NUM
-#define CONFIG_G_DNL_THOR_PRODUCT_NUM 0x685D
-#define CONFIG_G_DNL_UMS_VENDOR_NUM 0x0525
-#define CONFIG_G_DNL_UMS_PRODUCT_NUM 0xA4A5
-#define CONFIG_G_DNL_MANUFACTURER "Samsung"
-
-/* Miscellaneous configurable options */
-#define CONFIG_SYS_LONGHELP /* undef to save memory */
-#define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */
-#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
-#define CONFIG_SYS_PBSIZE 384 /* Print Buffer Size */
-#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
-/* Boot Argument Buffer Size */
-#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
-
-/* FLASH and environment organization */
-#define CONFIG_SYS_NO_FLASH
-#undef CONFIG_CMD_IMLS
-
-#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 2 sectors */
-
-#define CONFIG_DOS_PARTITION
-#define CONFIG_EFI_PARTITION
-#define CONFIG_CMD_PART
-#define CONFIG_PARTITION_UUIDS
-
-#define CONFIG_USB_GADGET
-#define CONFIG_USB_GADGET_S3C_UDC_OTG
-#define CONFIG_USB_GADGET_DUALSPEED
-#define CONFIG_USB_GADGET_VBUS_DRAW 2
-
-#define CONFIG_CMD_USB_MASS_STORAGE
-#define CONFIG_USB_GADGET_MASS_STORAGE
-
-/* Enable devicetree support */
-#define CONFIG_OF_LIBFDT
-
-#endif /* __CONFIG_H */
diff --git a/include/configs/exynos5-dt.h b/include/configs/exynos5-common.h
similarity index 64%
rename from include/configs/exynos5-dt.h
rename to include/configs/exynos5-common.h
index 1dc3002..ba591e7 100644
--- a/include/configs/exynos5-dt.h
+++ b/include/configs/exynos5-common.h
@@ -6,22 +6,14 @@
* SPDX-License-Identifier: GPL-2.0+
*/
-#ifndef __CONFIG_H
-#define __CONFIG_H
+#ifndef __CONFIG_EXYNOS5_COMMON_H
+#define __CONFIG_EXYNOS5_COMMON_H
-/* High Level Configuration Options */
-#define CONFIG_SAMSUNG /* in a SAMSUNG core */
-#define CONFIG_S5P /* S5P Family */
-#define CONFIG_EXYNOS5 /* which is in a Exynos5 Family */
+#define CONFIG_EXYNOS5 /* Exynos5 Family */
-#include <asm/arch/cpu.h> /* get chip and board defs */
+#include "exynos-common.h"
-#define CONFIG_SYS_GENERIC_BOARD
-#define CONFIG_ARCH_CPU_INIT
-#define CONFIG_DISPLAY_CPUINFO
-#define CONFIG_DISPLAY_BOARDINFO
-#define CONFIG_BOARD_COMMON
-#define CONFIG_ARCH_EARLY_INIT_R
+#define CONFIG_SYS_CACHELINE_SIZE 64
#define CONFIG_EXYNOS_SPL
/* Allow tracing to be enabled */
@@ -32,22 +24,11 @@
#define CONFIG_TRACE_EARLY
#define CONFIG_TRACE_EARLY_ADDR 0x50000000
-/* Keep L2 Cache Disabled */
-#define CONFIG_SYS_DCACHE_OFF
-#define CONFIG_SYS_CACHELINE_SIZE 64
/* Enable ACE acceleration for SHA1 and SHA256 */
#define CONFIG_EXYNOS_ACE_SHA
#define CONFIG_SHA_HW_ACCEL
-/* input clock of PLL: SMDK5250 has 24MHz input clock */
-#define CONFIG_SYS_CLK_FREQ 24000000
-
-#define CONFIG_SETUP_MEMORY_TAGS
-#define CONFIG_CMDLINE_TAG
-#define CONFIG_INITRD_TAG
-#define CONFIG_CMDLINE_EDITING
-
/* Power Down Modes */
#define S5P_CHECK_SLEEP 0x00000BAD
#define S5P_CHECK_DIDLE 0xBAD00000
@@ -59,66 +40,26 @@
#define INFORM2_OFFSET 0x808
#define INFORM3_OFFSET 0x80c
-/* Size of malloc() pool */
-#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (4 << 20))
-
/* select serial console configuration */
#define CONFIG_BAUDRATE 115200
#define EXYNOS5_DEFAULT_UART_OFFSET 0x010000
#define CONFIG_SILENT_CONSOLE
-
-/* Enable keyboard */
-#define CONFIG_CROS_EC /* CROS_EC protocol */
-#define CONFIG_CROS_EC_SPI /* Support CROS_EC over SPI */
-#define CONFIG_CROS_EC_I2C /* Support CROS_EC over I2C */
-#define CONFIG_CROS_EC_KEYB /* CROS_EC keyboard input */
-#define CONFIG_CMD_CROS_EC
-#define CONFIG_KEYBOARD
-
-/* Console configuration */
-#define CONFIG_CONSOLE_MUX
#define CONFIG_SYS_CONSOLE_IS_IN_ENV
+#define CONFIG_CONSOLE_MUX
+
#define EXYNOS_DEVICE_SETTINGS \
- "stdin=serial,cros-ec-keyb\0" \
- "stdout=serial,lcd\0" \
- "stderr=serial,lcd\0"
+ "stdin=serial\0" \
+ "stdout=serial\0" \
+ "stderr=serial\0"
#define CONFIG_EXTRA_ENV_SETTINGS \
EXYNOS_DEVICE_SETTINGS
-/* SD/MMC configuration */
-#define CONFIG_GENERIC_MMC
-#define CONFIG_MMC
-#define CONFIG_SDHCI
-#define CONFIG_S5P_SDHCI
-#define CONFIG_DWMMC
-#define CONFIG_EXYNOS_DWMMC
-#define CONFIG_SUPPORT_EMMC_BOOT
-#define CONFIG_BOUNCE_BUFFER
-
-#define CONFIG_BOARD_EARLY_INIT_F
-#define CONFIG_SKIP_LOWLEVEL_INIT
-
-/* PWM */
-#define CONFIG_PWM
-
-/* allow to overwrite serial and ethaddr */
-#define CONFIG_ENV_OVERWRITE
-
-/* Command definition*/
-#include <config_cmd_default.h>
-
#define CONFIG_CMD_PING
#define CONFIG_CMD_ELF
-#define CONFIG_CMD_MMC
-#define CONFIG_CMD_EXT2
-#define CONFIG_CMD_FAT
#define CONFIG_CMD_NET
#define CONFIG_CMD_HASH
-#define CONFIG_BOOTDELAY 3
-#define CONFIG_ZERO_BOOTDELAY_CHECK
-
/* Thermal Management Unit */
#define CONFIG_EXYNOS_TMU
#define CONFIG_CMD_DTT
@@ -133,6 +74,7 @@
/* MMC SPL */
#define COPY_BL2_FNPTR_ADDR 0x02020030
+#define CONFIG_SUPPORT_EMMC_BOOT
#define CONFIG_SPL_LIBCOMMON_SUPPORT
#define CONFIG_SPL_GPIO_SUPPORT
@@ -140,15 +82,7 @@
/* specific .lds file */
#define CONFIG_SPL_LDSCRIPT "board/samsung/common/exynos-uboot-spl.lds"
-/* Miscellaneous configurable options */
-#define CONFIG_SYS_LONGHELP /* undef to save memory */
-#define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */
-#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
-#define CONFIG_SYS_PBSIZE 384 /* Print Buffer Size */
-#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
-#define CONFIG_DEFAULT_CONSOLE "console=ttySAC1,115200n8\0"
/* Boot Argument Buffer Size */
-#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
/* memtest works on */
#define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE
#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_SDRAM_BASE + 0x5E00000)
@@ -175,10 +109,6 @@
#define CONFIG_SYS_MONITOR_BASE 0x00000000
-/* FLASH and environment organization */
-#define CONFIG_SYS_NO_FLASH
-#undef CONFIG_CMD_IMLS
-
#define CONFIG_SYS_MMC_ENV_DEV 0
#define CONFIG_SECURE_BL1_ONLY
@@ -199,23 +129,13 @@
#define CONFIG_BL1_OFFSET (CONFIG_RES_BLOCK_SIZE + CONFIG_SEC_FW_SIZE)
#define CONFIG_BL2_OFFSET (CONFIG_BL1_OFFSET + CONFIG_BL1_SIZE)
-/* Store environment at the end of a 4 MB SPI flash */
-#define FLASH_SIZE (0x4 << 20)
-#define CONFIG_ENV_OFFSET (FLASH_SIZE - CONFIG_BL2_SIZE)
-
/* U-boot copy size from boot Media to DRAM.*/
#define BL2_START_OFFSET (CONFIG_BL2_OFFSET/512)
#define BL2_SIZE_BLOC_COUNT (CONFIG_BL2_SIZE/512)
-#define CONFIG_SPI_BOOTING
#define EXYNOS_COPY_SPI_FNPTR_ADDR 0x02020058
#define SPI_FLASH_UBOOT_POS (CONFIG_SEC_FW_SIZE + CONFIG_BL1_SIZE)
-#define CONFIG_DOS_PARTITION
-#define CONFIG_EFI_PARTITION
-#define CONFIG_CMD_PART
-#define CONFIG_PARTITION_UUIDS
-
/* I2C */
#define CONFIG_SYS_I2C_INIT_BOARD
#define CONFIG_SYS_I2C
@@ -227,10 +147,6 @@
#define CONFIG_I2C_EDID
/* SPI */
-#define CONFIG_ENV_IS_IN_SPI_FLASH
-#define CONFIG_SPI_FLASH
-#define CONFIG_ENV_SPI_BASE 0x12D30000
-
#ifdef CONFIG_SPI_FLASH
#define CONFIG_EXYNOS_SPI
#define CONFIG_CMD_SF
@@ -250,11 +166,6 @@
#define CONFIG_ENV_SPI_MAX_HZ 50000000
#endif
-/* PMIC */
-#define CONFIG_POWER
-#define CONFIG_POWER_I2C
-#define CONFIG_POWER_TPS65090
-
/* Ethernet Controllor Driver */
#ifdef CONFIG_CMD_NET
#define CONFIG_SMC911X
@@ -269,9 +180,6 @@
#define CONFIG_MENU
#endif
-/* Enable devicetree support */
-#define CONFIG_OF_LIBFDT
-
/* SHA hashing */
#define CONFIG_CMD_HASH
#define CONFIG_HASH_VERIFY
@@ -291,4 +199,8 @@
#define EXYNOS_USB_SECONDARY_BOOT 0xfeed0002
#define EXYNOS_IRAM_SECONDARY_BASE 0x02020018
-#endif /* __CONFIG_H */
+/* Enable FIT support and comparison */
+#define CONFIG_FIT
+#define CONFIG_FIT_BEST_MATCH
+
+#endif /* __CONFIG_EXYNOS5_COMMON_H */
diff --git a/include/configs/exynos5-dt-common.h b/include/configs/exynos5-dt-common.h
new file mode 100644
index 0000000..66547fa
--- /dev/null
+++ b/include/configs/exynos5-dt-common.h
@@ -0,0 +1,35 @@
+/*
+ * Copyright (C) 2014 Google, Inc
+ *
+ * Configuration settings for generic Exynos 5 board
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef __CONFIG_EXYNOS5_DT_COMMON_H
+#define __CONFIG_EXYNOS5_DT_COMMON_H
+
+#include "exynos5-common.h"
+
+/* PMIC */
+#define CONFIG_POWER
+#define CONFIG_POWER_I2C
+#define CONFIG_POWER_TPS65090
+
+/* Enable keyboard */
+#define CONFIG_CROS_EC /* CROS_EC protocol */
+#define CONFIG_CROS_EC_KEYB /* CROS_EC keyboard input */
+#define CONFIG_CMD_CROS_EC
+#define CONFIG_KEYBOARD
+
+/* Console configuration */
+#undef EXYNOS_DEVICE_SETTINGS
+#define EXYNOS_DEVICE_SETTINGS \
+ "stdin=serial,cros-ec-keyb\0" \
+ "stdout=serial,lcd\0" \
+ "stderr=serial,lcd\0"
+
+#define CONFIG_EXTRA_ENV_SETTINGS \
+ EXYNOS_DEVICE_SETTINGS
+
+#endif
diff --git a/include/configs/exynos5250-dt.h b/include/configs/exynos5250-common.h
similarity index 88%
rename from include/configs/exynos5250-dt.h
rename to include/configs/exynos5250-common.h
index c24984b..713614f 100644
--- a/include/configs/exynos5250-dt.h
+++ b/include/configs/exynos5250-common.h
@@ -10,7 +10,7 @@
#ifndef __CONFIG_5250_H
#define __CONFIG_5250_H
-#include <configs/exynos5-dt.h>
+#include <configs/exynos5-common.h>
#define CONFIG_EXYNOS5250
#define CONFIG_SYS_SDRAM_BASE 0x40000000
@@ -24,8 +24,6 @@
/* USB */
#define CONFIG_CMD_USB
-#define CONFIG_USB_XHCI
-#define CONFIG_USB_XHCI_EXYNOS
#define CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS 2
#define CONFIG_USB_STORAGE
@@ -33,9 +31,6 @@
#define CONFIG_BOOTCOMMAND "mmc read 40007000 451 2000; bootm 40007000"
-#define CONFIG_SYS_PROMPT "SMDK5250 # "
-#define CONFIG_IDENT_STRING " for SMDK5250"
-
#define CONFIG_IRAM_STACK 0x02050000
#define CONFIG_SYS_INIT_SP_ADDR CONFIG_IRAM_STACK
diff --git a/include/configs/exynos5420.h b/include/configs/exynos5420-common.h
similarity index 71%
rename from include/configs/exynos5420.h
rename to include/configs/exynos5420-common.h
index d2a9556..b0f940c 100644
--- a/include/configs/exynos5420.h
+++ b/include/configs/exynos5420-common.h
@@ -9,7 +9,18 @@
#ifndef __CONFIG_EXYNOS5420_H
#define __CONFIG_EXYNOS5420_H
-#define CONFIG_EXYNOS5420 /* which is in a Exynos5 Family */
+#define CONFIG_EXYNOS5420
+
+#define CONFIG_ENV_IS_IN_SPI_FLASH
+#define CONFIG_SPI_FLASH
+#define CONFIG_ENV_SPI_BASE 0x12D30000
+#define FLASH_SIZE (0x4 << 20)
+#define CONFIG_ENV_OFFSET (FLASH_SIZE - CONFIG_BL2_SIZE)
+#define CONFIG_SPI_BOOTING
+
+#include <configs/exynos5-common.h>
+
+#define CONFIG_ARCH_EARLY_INIT_R
#define MACH_TYPE_SMDK5420 8002
#define CONFIG_MACH_TYPE MACH_TYPE_SMDK5420
@@ -31,14 +42,12 @@
#define CONFIG_MAX_I2C_NUM 11
-/* Enable FIT support and comparison */
-#define CONFIG_FIT
-#define CONFIG_FIT_BEST_MATCH
-
#define CONFIG_BOARD_REV_GPIO_COUNT 2
#define CONFIG_BOOTCOMMAND "mmc read 20007000 451 2000; bootm 20007000"
+#define CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS 2
+
/*
* Put the initial stack pointer 1KB below this to allow room for the
* SPL marker. This value is arbitrary, but gd_t is placed starting here.
@@ -49,4 +58,7 @@
#define CONFIG_NR_DRAM_BANKS 7
#define SDRAM_BANK_SIZE (512UL << 20UL) /* 512 MB */
+/* Miscellaneous configurable options */
+#define CONFIG_DEFAULT_CONSOLE "console=ttySAC1,115200n8\0"
+
#endif /* __CONFIG_EXYNOS5420_H */
diff --git a/include/configs/koelsch.h b/include/configs/koelsch.h
index 21667d1..e015e90 100644
--- a/include/configs/koelsch.h
+++ b/include/configs/koelsch.h
@@ -89,6 +89,7 @@
/* SCIF */
#define CONFIG_SCIF_CONSOLE
#define CONFIG_CONS_SCIF0
+#define CONFIG_SCIF_USE_EXT_CLK
#undef CONFIG_SYS_CONSOLE_INFO_QUIET
#undef CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE
#undef CONFIG_SYS_CONSOLE_ENV_OVERWRITE
diff --git a/include/configs/lager.h b/include/configs/lager.h
index 6e9d67d..699135f 100644
--- a/include/configs/lager.h
+++ b/include/configs/lager.h
@@ -90,6 +90,7 @@
/* SCIF */
#define CONFIG_SCIF_CONSOLE
#define CONFIG_CONS_SCIF0
+#define CONFIG_SCIF_USE_EXT_CLK
#undef CONFIG_SYS_CONSOLE_INFO_QUIET
#undef CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE
#undef CONFIG_SYS_CONSOLE_ENV_OVERWRITE
@@ -167,7 +168,7 @@
#define CONFIG_PLL1_DIV2_CLK_FREQ (CONFIG_PLL1_CLK_FREQ / 2)
#define CONFIG_MP_CLK_FREQ (CONFIG_PLL1_DIV2_CLK_FREQ / 15)
#define CONFIG_HP_CLK_FREQ (CONFIG_PLL1_CLK_FREQ / 12)
-#define CONFIG_SH_SCIF_CLK_FREQ CONFIG_MP_CLK_FREQ
+#define CONFIG_SH_SCIF_CLK_FREQ 14745600 /* External Clock */
#define CONFIG_SYS_TMU_CLK_DIV 4
diff --git a/include/configs/m28evk.h b/include/configs/m28evk.h
index fccd29d..efe770b 100644
--- a/include/configs/m28evk.h
+++ b/include/configs/m28evk.h
@@ -32,6 +32,7 @@
#define CONFIG_CMD_EXT4
#define CONFIG_CMD_EXT4_WRITE
#define CONFIG_CMD_FAT
+#define CONFIG_CMD_FS_GENERIC
#define CONFIG_CMD_GPIO
#define CONFIG_CMD_GREPENV
#define CONFIG_CMD_I2C
@@ -236,7 +237,7 @@
"addargs=run addcons addmtd addmisc\0" \
"mmcload=" \
"mmc rescan ; " \
- "ext4load mmc 0:2 ${kernel_addr_r} ${bootfile}\0" \
+ "load mmc 0:2 ${kernel_addr_r} ${bootfile}\0" \
"ubiload=" \
"ubi part UBI ; ubifsmount ubi0:rootfs ; " \
"ubifsload ${kernel_addr_r} /boot/${bootfile}\0" \
@@ -279,10 +280,12 @@
"bootm ${kernel_addr_r}\0" \
"try_bootscript=" \
"mmc rescan;" \
- "if ext4load mmc 0:2 ${kernel_addr_r} ${bootscript};" \
- "then;" \
- "\techo Running bootscript...;" \
- "\tsource ${kernel_addr_r};" \
+ "if test -e mmc 0:2 ${bootscript} ; then " \
+ "if load mmc 0:2 ${kernel_addr_r} ${bootscript};" \
+ "then ; " \
+ "echo Running bootscript... ; " \
+ "source ${kernel_addr_r} ; " \
+ "fi ; " \
"fi\0"
/* The rest of the configuration is shared */
diff --git a/include/configs/m53evk.h b/include/configs/m53evk.h
index df6a226..c133ba9 100644
--- a/include/configs/m53evk.h
+++ b/include/configs/m53evk.h
@@ -38,6 +38,7 @@
#define CONFIG_CMD_EXT4
#define CONFIG_CMD_EXT4_WRITE
#define CONFIG_CMD_FAT
+#define CONFIG_CMD_FS_GENERIC
#define CONFIG_CMD_GREPENV
#define CONFIG_CMD_I2C
#define CONFIG_CMD_MII
@@ -305,7 +306,7 @@
"addargs=run addcons addmtd addmisc\0" \
"mmcload=" \
"mmc rescan ; " \
- "ext4load mmc 0:1 ${kernel_addr_r} ${bootfile}\0" \
+ "load mmc 0:1 ${kernel_addr_r} ${bootfile}\0" \
"ubiload=" \
"ubi part UBI ; ubifsmount ubi0:rootfs ; " \
"ubifsload ${kernel_addr_r} /boot/${bootfile}\0" \
@@ -348,10 +349,12 @@
"bootm ${kernel_addr_r}\0" \
"try_bootscript=" \
"mmc rescan;" \
- "if ext4load mmc 0:1 ${kernel_addr_r} ${bootscript};" \
- "then;" \
- "\techo Running bootscript...;" \
- "\tsource ${kernel_addr_r};" \
+ "if test -e mmc 0:1 ${bootscript} ; then " \
+ "if load mmc 0:1 ${kernel_addr_r} ${bootscript};" \
+ "then ; " \
+ "echo Running bootscript... ; " \
+ "source ${kernel_addr_r} ; " \
+ "fi ; " \
"fi\0"
#endif /* __M53EVK_CONFIG_H__ */
diff --git a/include/configs/mx25pdk.h b/include/configs/mx25pdk.h
index d464ad9..c02e29b 100644
--- a/include/configs/mx25pdk.h
+++ b/include/configs/mx25pdk.h
@@ -14,6 +14,7 @@
#define CONFIG_MX25
#define CONFIG_SYS_TEXT_BASE 0x81200000
#define CONFIG_MXC_GPIO
+#define CONFIG_SYS_GENERIC_BOARD
#define CONFIG_SYS_TIMER_RATE 32768
#define CONFIG_SYS_TIMER_COUNTER \
@@ -100,7 +101,7 @@
#define CONFIG_MMC
#define CONFIG_GENERIC_MMC
#define CONFIG_FSL_ESDHC
-#define CONFIG_SYS_FSL_ESDHC_ADDR 0
+#define CONFIG_SYS_FSL_ESDHC_ADDR IMX_MMC_SDHC1_BASE
#define CONFIG_SYS_FSL_ESDHC_NUM 1
/* PMIC Configs */
diff --git a/include/configs/mx51evk.h b/include/configs/mx51evk.h
index b389475..d6e8ec4 100644
--- a/include/configs/mx51evk.h
+++ b/include/configs/mx51evk.h
@@ -26,6 +26,7 @@
#define CONFIG_SETUP_MEMORY_TAGS
#define CONFIG_INITRD_TAG
#define CONFIG_REVISION_TAG
+#define CONFIG_SYS_GENERIC_BOARD
#define CONFIG_OF_LIBFDT
@@ -69,7 +70,7 @@
* MMC Configs
* */
#define CONFIG_FSL_ESDHC
-#define CONFIG_SYS_FSL_ESDHC_ADDR 0
+#define CONFIG_SYS_FSL_ESDHC_ADDR MMC_SDHC1_BASE_ADDR
#define CONFIG_SYS_FSL_ESDHC_NUM 2
#define CONFIG_MMC
diff --git a/include/configs/mx6qarm2.h b/include/configs/mx6qarm2.h
index 35c0a85..6e01fa0 100644
--- a/include/configs/mx6qarm2.h
+++ b/include/configs/mx6qarm2.h
@@ -10,7 +10,6 @@
#define __CONFIG_H
#define CONFIG_MX6
-#define CONFIG_MX6Q
#include "mx6_common.h"
@@ -37,7 +36,7 @@
/* MMC Configs */
#define CONFIG_FSL_ESDHC
#define CONFIG_FSL_USDHC
-#define CONFIG_SYS_FSL_ESDHC_ADDR 0
+#define CONFIG_SYS_FSL_ESDHC_ADDR USDHC4_BASE_ADDR
#define CONFIG_SYS_FSL_USDHC_NUM 2
#define CONFIG_MMC
@@ -69,18 +68,22 @@
#define CONFIG_BOOTDELAY 3
-#define CONFIG_LOADADDR 0x10800000
+#define CONFIG_LOADADDR 0x12000000
#define CONFIG_SYS_TEXT_BASE 0x17800000
#define CONFIG_EXTRA_ENV_SETTINGS \
"script=boot.scr\0" \
"image=zImage\0" \
"console=ttymxc3\0" \
+ "fdt_file=imx6q-arm2.dtb\0" \
+ "fdt_addr=0x18000000\0" \
"fdt_high=0xffffffff\0" \
"initrd_high=0xffffffff\0" \
+ "boot_fdt=try\0" \
+ "ip_dyn=yes\0" \
"mmcdev=1\0" \
- "mmcpart=2\0" \
- "mmcroot=/dev/mmcblk0p3 rootwait rw\0" \
+ "mmcpart=1\0" \
+ "mmcroot=/dev/mmcblk0p2 rootwait rw\0" \
"mmcargs=setenv bootargs console=${console},${baudrate} " \
"root=${mmcroot}\0" \
"loadbootscript=" \
@@ -88,15 +91,46 @@
"bootscript=echo Running bootscript from mmc ...; " \
"source\0" \
"loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
+ "loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
"mmcboot=echo Booting from mmc ...; " \
"run mmcargs; " \
- "bootz\0" \
+ "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
+ "if run loadfdt; then " \
+ "bootz ${loadaddr} - ${fdt_addr}; " \
+ "else " \
+ "if test ${boot_fdt} = try; then " \
+ "bootz; " \
+ "else " \
+ "echo WARN: Cannot load the DT; " \
+ "fi; " \
+ "fi; " \
+ "else " \
+ "bootz; " \
+ "fi;\0" \
"netargs=setenv bootargs console=${console},${baudrate} " \
"root=/dev/nfs " \
"ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
"netboot=echo Booting from net ...; " \
"run netargs; " \
- "dhcp ${image}; bootz\0" \
+ "if test ${ip_dyn} = yes; then " \
+ "setenv get_cmd dhcp; " \
+ "else " \
+ "setenv get_cmd tftp; " \
+ "fi; " \
+ "${get_cmd} ${image}; " \
+ "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
+ "if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \
+ "bootz ${loadaddr} - ${fdt_addr}; " \
+ "else " \
+ "if test ${boot_fdt} = try; then " \
+ "bootz; " \
+ "else " \
+ "echo WARN: Cannot load the DT; " \
+ "fi; " \
+ "fi; " \
+ "else " \
+ "bootz; " \
+ "fi;\0"
#define CONFIG_BOOTCOMMAND \
"mmc dev ${mmcdev};" \
@@ -134,7 +168,6 @@
/* Physical Memory Map */
#define CONFIG_NR_DRAM_BANKS 1
#define PHYS_SDRAM MMDC0_ARB_BASE_ADDR
-#define PHYS_SDRAM_SIZE (2u * 1024 * 1024 * 1024)
#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM
#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR
diff --git a/include/configs/mx6slevk.h b/include/configs/mx6slevk.h
index 4208ba1..fddedf1 100644
--- a/include/configs/mx6slevk.h
+++ b/include/configs/mx6slevk.h
@@ -40,7 +40,7 @@
/* MMC Configs */
#define CONFIG_FSL_ESDHC
#define CONFIG_FSL_USDHC
-#define CONFIG_SYS_FSL_ESDHC_ADDR 0
+#define CONFIG_SYS_FSL_ESDHC_ADDR USDHC2_BASE_ADDR
#define CONFIG_MMC
#define CONFIG_CMD_MMC
diff --git a/include/configs/mx6sxsabresd.h b/include/configs/mx6sxsabresd.h
index b92d944..e02ea18 100644
--- a/include/configs/mx6sxsabresd.h
+++ b/include/configs/mx6sxsabresd.h
@@ -159,7 +159,7 @@
/* MMC Configuration */
#define CONFIG_FSL_ESDHC
#define CONFIG_FSL_USDHC
-#define CONFIG_SYS_FSL_ESDHC_ADDR 0
+#define CONFIG_SYS_FSL_ESDHC_ADDR USDHC4_BASE_ADDR
#define CONFIG_MMC
#define CONFIG_CMD_MMC
@@ -204,8 +204,8 @@
#define CONFIG_PCI_PNP
#define CONFIG_PCI_SCAN_SHOW
#define CONFIG_PCIE_IMX
-#define CONFIG_PCIE_IMX_PERST_GPIO IMX_GPIO_NR(2, 1)
-#define CONFIG_PCIE_IMX_POWER_GPIO IMX_GPIO_NR(2, 0)
+#define CONFIG_PCIE_IMX_PERST_GPIO IMX_GPIO_NR(2, 0)
+#define CONFIG_PCIE_IMX_POWER_GPIO IMX_GPIO_NR(2, 1)
#endif
/* FLASH and environment organization */
diff --git a/include/configs/nitrogen6x.h b/include/configs/nitrogen6x.h
index 39d5bb3..6d379ed 100644
--- a/include/configs/nitrogen6x.h
+++ b/include/configs/nitrogen6x.h
@@ -32,6 +32,7 @@
#define CONFIG_BOARD_EARLY_INIT_F
#define CONFIG_MISC_INIT_R
#define CONFIG_MXC_GPIO
+#define CONFIG_CMD_GPIO
#define CONFIG_CI_UDC
#define CONFIG_USBD_HS
#define CONFIG_USB_GADGET_DUALSPEED
@@ -63,6 +64,7 @@
#define CONFIG_SYS_I2C
#define CONFIG_SYS_I2C_MXC
#define CONFIG_SYS_I2C_SPEED 100000
+#define CONFIG_I2C_EDID
/* MMC Configs */
#define CONFIG_FSL_ESDHC
@@ -75,6 +77,8 @@
#define CONFIG_GENERIC_MMC
#define CONFIG_BOUNCE_BUFFER
#define CONFIG_CMD_EXT2
+#define CONFIG_CMD_EXT4
+#define CONFIG_CMD_EXT4_WRITE
#define CONFIG_CMD_FAT
#define CONFIG_DOS_PARTITION
@@ -122,6 +126,8 @@
#define CONFIG_EHCI_HCD_INIT_AFTER_RESET /* For OTG port */
#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW)
#define CONFIG_MXC_USB_FLAGS 0
+#define CONFIG_USB_KEYBOARD
+#define CONFIG_SYS_USB_EVENT_POLL_VIA_CONTROL_EP
/* Miscellaneous commands */
#define CONFIG_CMD_BMODE
@@ -137,7 +143,6 @@
#define CONFIG_VIDEO_BMP_RLE8
#define CONFIG_SPLASH_SCREEN
#define CONFIG_BMP_16BPP
-#define CONFIG_VIDEO_LOGO
#define CONFIG_IPUV3_CLK 260000000
#define CONFIG_CMD_HDMIDETECT
#define CONFIG_CONSOLE_MUX
@@ -173,7 +178,14 @@
#define CONFIG_DRIVE_MMC
#endif
-#define CONFIG_DRIVE_TYPES CONFIG_DRIVE_SATA CONFIG_DRIVE_MMC
+#ifdef CONFIG_USB_STORAGE
+#define CONFIG_DRIVE_USB "usb "
+#else
+#define CONFIG_DRIVE_USB
+#endif
+
+#define CONFIG_DRIVE_TYPES CONFIG_DRIVE_SATA CONFIG_DRIVE_MMC CONFIG_DRIVE_USB
+#define CONFIG_UMSDEVS CONFIG_DRIVE_SATA CONFIG_DRIVE_MMC
#if defined(CONFIG_SABRELITE)
#define CONFIG_EXTRA_ENV_SETTINGS \
@@ -186,7 +198,7 @@
"fdt_addr=0x18000000\0" \
"boot_fdt=try\0" \
"ip_dyn=yes\0" \
- "mmcdev=0\0" \
+ "mmcdevs=0 1\0" \
"mmcpart=1\0" \
"mmcroot=/dev/mmcblk0p2 rootwait rw\0" \
"mmcargs=setenv bootargs console=${console},${baudrate} " \
@@ -238,47 +250,71 @@
"fi;\0"
#define CONFIG_BOOTCOMMAND \
- "mmc dev ${mmcdev}; if mmc rescan; then " \
- "if run loadbootscript; then " \
- "run bootscript; " \
- "else " \
- "if run loaduimage; then " \
- "run mmcboot; " \
- "else run netboot; " \
- "fi; " \
- "fi; " \
- "else run netboot; fi"
+ "for mmcdev in ${mmcdevs}; do " \
+ "mmc dev ${mmcdev}; " \
+ "if mmc rescan; then " \
+ "if run loadbootscript; then " \
+ "run bootscript; " \
+ "else " \
+ "if run loaduimage; then " \
+ "run mmcboot; " \
+ "fi; " \
+ "fi; " \
+ "fi; " \
+ "done; " \
+ "run netboot; "
#else
#define CONFIG_EXTRA_ENV_SETTINGS \
+ "bootdevs=" CONFIG_DRIVE_TYPES "\0" \
+ "umsdevs=" CONFIG_UMSDEVS "\0" \
"console=ttymxc1\0" \
"clearenv=if sf probe || sf probe || sf probe 1 ; then " \
"sf erase 0xc0000 0x2000 && " \
"echo restored environment to factory default ; fi\0" \
- "bootcmd=for dtype in " CONFIG_DRIVE_TYPES \
+ "bootcmd=for dtype in ${bootdevs}" \
"; do " \
+ "if itest.s \"xusb\" == \"x${dtype}\" ; then " \
+ "usb start ;" \
+ "fi; " \
"for disk in 0 1 ; do ${dtype} dev ${disk} ;" \
- "for fs in fat ext2 ; do " \
- "${fs}load " \
- "${dtype} ${disk}:1 " \
- "10008000 " \
- "/6x_bootscript" \
- "&& source 10008000 ; " \
- "done ; " \
+ "load " \
+ "${dtype} ${disk}:1 " \
+ "10008000 " \
+ "/6x_bootscript" \
+ "&& source 10008000 ; " \
"done ; " \
"done; " \
"setenv stdout serial,vga ; " \
"echo ; echo 6x_bootscript not found ; " \
"echo ; echo serial console at 115200, 8N1 ; echo ; " \
"echo details at http://boundarydevices.com/6q_bootscript ; " \
- "setenv stdout serial\0" \
- "upgradeu=for dtype in " CONFIG_DRIVE_TYPES \
+ "setenv stdout serial;" \
+ "setenv stdin serial,usbkbd;" \
+ "for dtype in ${umsdevs} ; do " \
+ "if itest.s sata == ${dtype}; then " \
+ "initcmd='sata init' ;" \
+ "else " \
+ "initcmd='mmc rescan' ;" \
+ "fi; " \
+ "for disk in 0 1 ; do " \
+ "if $initcmd && $dtype dev $disk ; then " \
+ "setenv stdout serial,vga; " \
+ "echo expose ${dtype} ${disk} " \
+ "over USB; " \
+ "ums 0 $dtype $disk ;" \
+ "fi; " \
+ " done; " \
+ "done ;" \
+ "setenv stdout serial,vga; " \
+ "echo no block devices found;" \
+ "\0" \
+ "initrd_high=0xffffffff\0" \
+ "upgradeu=for dtype in ${bootdevs}" \
"; do " \
"for disk in 0 1 ; do ${dtype} dev ${disk} ;" \
- "for fs in fat ext2 ; do " \
- "${fs}load ${dtype} ${disk}:1 10008000 " \
- "/6x_upgrade " \
- "&& source 10008000 ; " \
- "done ; " \
+ "load ${dtype} ${disk}:1 10008000 " \
+ "/6x_upgrade " \
+ "&& source 10008000 ; " \
"done ; " \
"done\0" \
@@ -292,7 +328,7 @@
/* Print Buffer Size */
#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
-#define CONFIG_SYS_MAXARGS 16
+#define CONFIG_SYS_MAXARGS 48
#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
#define CONFIG_SYS_MEMTEST_START 0x10000000
@@ -349,6 +385,7 @@
#define CONFIG_CMD_BMP
#define CONFIG_CMD_TIME
+#define CONFIG_CMD_MEMTEST
#define CONFIG_SYS_ALT_MEMTEST
#define CONFIG_CMD_BOOTZ
@@ -365,4 +402,22 @@
#define CONFIG_PCIE_IMX
#endif
+#define CONFIG_CMD_ELF
+
+#define CONFIG_USB_GADGET
+#define CONFIG_CMD_USB_MASS_STORAGE
+#define CONFIG_USB_GADGET_MASS_STORAGE
+#define CONFIG_USBDOWNLOAD_GADGET
+#define CONFIG_USB_GADGET_VBUS_DRAW 2
+
+/* Netchip IDs */
+#define CONFIG_G_DNL_VENDOR_NUM 0x0525
+#define CONFIG_G_DNL_PRODUCT_NUM 0xa4a5
+#define CONFIG_G_DNL_MANUFACTURER "Boundary"
+
+#define CONFIG_CMD_FASTBOOT
+#define CONFIG_ANDROID_BOOT_IMAGE
+#define CONFIG_USB_FASTBOOT_BUF_ADDR CONFIG_SYS_LOAD_ADDR
+#define CONFIG_USB_FASTBOOT_BUF_SIZE 0x07000000
+
#endif /* __CONFIG_H */
diff --git a/include/configs/odroid.h b/include/configs/odroid.h
index b616ac2..b928af8 100644
--- a/include/configs/odroid.h
+++ b/include/configs/odroid.h
@@ -12,7 +12,7 @@
#ifndef __CONFIG_ODROID_U3_H
#define __CONFIG_ODROID_U3_H
-#include <configs/exynos4-dt.h>
+#include <configs/exynos4-common.h>
#define CONFIG_SYS_PROMPT "Odroid # " /* Monitor Command Prompt */
@@ -37,8 +37,6 @@
#define CONFIG_SYS_TEXT_BASE 0x43e00000
#include <linux/sizes.h>
-/* Size of malloc() pool */
-#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (80 * SZ_1M))
/* select serial console configuration */
#define CONFIG_SERIAL1
diff --git a/include/configs/origen.h b/include/configs/origen.h
index fb1536c..da9d6a1 100644
--- a/include/configs/origen.h
+++ b/include/configs/origen.h
@@ -9,7 +9,7 @@
#ifndef __CONFIG_ORIGEN_H
#define __CONFIG_ORIGEN_H
-#include <configs/exynos4-dt.h>
+#include <configs/exynos4-common.h>
#define CONFIG_SYS_PROMPT "ORIGEN # "
@@ -35,9 +35,6 @@
#define CONFIG_MACH_TYPE MACH_TYPE_ORIGEN
-/* Size of malloc() pool */
-#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (80 * SZ_1M))
-
/* select serial console configuration */
#define CONFIG_SERIAL2
#define CONFIG_BAUDRATE 115200
diff --git a/include/configs/ot1200.h b/include/configs/ot1200.h
new file mode 100644
index 0000000..071880f
--- /dev/null
+++ b/include/configs/ot1200.h
@@ -0,0 +1,197 @@
+/*
+ * Copyright (C) 2010-2013 Freescale Semiconductor, Inc.
+ * Copyright (C) 2014 Bachmann electronic GmbH
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+#include "mx6_common.h"
+#define CONFIG_MX6
+#define CONFIG_DISPLAY_CPUINFO
+#define CONFIG_DISPLAY_BOARDINFO
+
+#include <asm/arch/imx-regs.h>
+#include <asm/imx-common/gpio.h>
+
+#define CONFIG_CMDLINE_TAG
+#define CONFIG_SETUP_MEMORY_TAGS
+#define CONFIG_INITRD_TAG
+#define CONFIG_REVISION_TAG
+#define CONFIG_SYS_GENERIC_BOARD
+
+/* Size of malloc() pool */
+#define CONFIG_SYS_MALLOC_LEN (10 * 1024 * 1024)
+
+#define CONFIG_BOARD_EARLY_INIT_F
+#define CONFIG_MISC_INIT_R
+#define CONFIG_MXC_GPIO
+
+/* FUSE Configs */
+#define CONFIG_CMD_FUSE
+#define CONFIG_MXC_OCOTP
+
+/* UART Configs */
+#define CONFIG_MXC_UART
+#define CONFIG_MXC_UART_BASE UART1_BASE
+
+/* SF Configs */
+#define CONFIG_CMD_SF
+#define CONFIG_SPI
+#define CONFIG_SPI_FLASH
+#define CONFIG_SPI_FLASH_STMICRO
+#define CONFIG_SPI_FLASH_WINBOND
+#define CONFIG_SPI_FLASH_MACRONIX
+#define CONFIG_SPI_FLASH_SST
+#define CONFIG_MXC_SPI
+#define CONFIG_SF_DEFAULT_BUS 2
+#define CONFIG_SF_DEFAULT_CS (0|(IMX_GPIO_NR(1, 3)<<8))
+#define CONFIG_SF_DEFAULT_SPEED 25000000
+#define CONFIG_SF_DEFAULT_MODE (SPI_MODE_0)
+
+/* IO expander */
+#define CONFIG_PCA953X
+#define CONFIG_SYS_I2C_PCA953X_ADDR 0x20
+#define CONFIG_SYS_I2C_PCA953X_WIDTH { {0x20, 16} }
+#define CONFIG_CMD_PCA953X
+#define CONFIG_CMD_PCA953X_INFO
+
+/* I2C Configs */
+#define CONFIG_CMD_I2C
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_MXC
+#define CONFIG_SYS_I2C_SPEED 100000
+
+/* OCOTP Configs */
+#define CONFIG_CMD_IMXOTP
+#define CONFIG_IMX_OTP
+#define IMX_OTP_BASE OCOTP_BASE_ADDR
+#define IMX_OTP_ADDR_MAX 0x7F
+#define IMX_OTP_DATA_ERROR_VAL 0xBADABADA
+#define IMX_OTPWRITE_ENABLED
+
+/* MMC Configs */
+#define CONFIG_FSL_ESDHC
+#define CONFIG_FSL_USDHC
+#define CONFIG_SYS_FSL_ESDHC_ADDR 0
+#define CONFIG_SYS_FSL_USDHC_NUM 2
+
+#define CONFIG_MMC
+#define CONFIG_CMD_MMC
+#define CONFIG_GENERIC_MMC
+#define CONFIG_BOUNCE_BUFFER
+
+#ifdef CONFIG_MX6Q
+#define CONFIG_CMD_SATA
+#endif
+
+/*
+ * SATA Configs
+ */
+#ifdef CONFIG_CMD_SATA
+#define CONFIG_DWC_AHSATA
+#define CONFIG_SYS_SATA_MAX_DEVICE 1
+#define CONFIG_DWC_AHSATA_PORT_ID 0
+#define CONFIG_DWC_AHSATA_BASE_ADDR SATA_ARB_BASE_ADDR
+#define CONFIG_LBA48
+#define CONFIG_LIBATA
+#endif
+
+
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_NET
+#define CONFIG_FEC_MXC
+#define CONFIG_MII
+#define IMX_FEC_BASE ENET_BASE_ADDR
+#define CONFIG_FEC_XCV_TYPE MII100
+#define CONFIG_ETHPRIME "FEC"
+#define CONFIG_FEC_MXC_PHYADDR 0x5
+#define CONFIG_PHYLIB
+#define CONFIG_PHY_SMSC
+
+/* Miscellaneous commands */
+#define CONFIG_CMD_BMODE
+#define CONFIG_CMD_SETEXPR
+
+/* allow to overwrite serial and ethaddr */
+#define CONFIG_ENV_OVERWRITE
+#define CONFIG_CONS_INDEX 1
+#define CONFIG_BAUDRATE 115200
+
+/* Command definition */
+#include <config_cmd_default.h>
+
+#undef CONFIG_CMD_IMLS
+
+#define CONFIG_BOOTDELAY 2
+
+#define CONFIG_PREBOOT ""
+
+#define CONFIG_LOADADDR 0x12000000
+#define CONFIG_SYS_TEXT_BASE 0x17800000
+
+/* Miscellaneous configurable options */
+#define CONFIG_SYS_LONGHELP
+#define CONFIG_SYS_HUSH_PARSER
+#define CONFIG_SYS_CBSIZE 1024
+
+/* Print Buffer Size */
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
+#define CONFIG_SYS_MAXARGS 16
+#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
+
+#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR
+
+#define CONFIG_CMDLINE_EDITING
+
+/* Physical Memory Map */
+#define CONFIG_NR_DRAM_BANKS 1
+#define PHYS_SDRAM MMDC0_ARB_BASE_ADDR
+#define PHYS_SDRAM_SIZE (1u * 1024 * 1024 * 1024)
+
+#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM
+#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR
+#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE
+
+#define CONFIG_SYS_INIT_SP_OFFSET \
+ (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP_ADDR \
+ (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
+
+/* FLASH and environment organization */
+#define CONFIG_SYS_NO_FLASH
+
+#define CONFIG_ENV_IS_IN_SPI_FLASH
+#define CONFIG_ENV_SIZE (64 * 1024) /* 64 kb */
+#define CONFIG_ENV_OFFSET (1024 * 1024)
+/* M25P16 has an erase size of 64 KiB */
+#define CONFIG_ENV_SECT_SIZE (64 * 1024)
+#define CONFIG_ENV_SPI_BUS CONFIG_SF_DEFAULT_BUS
+#define CONFIG_ENV_SPI_CS CONFIG_SF_DEFAULT_CS
+#define CONFIG_ENV_SPI_MODE CONFIG_SF_DEFAULT_MODE
+#define CONFIG_ENV_SPI_MAX_HZ CONFIG_SF_DEFAULT_SPEED
+
+#define CONFIG_OF_LIBFDT
+#define CONFIG_CMD_BOOTZ
+
+#ifndef CONFIG_SYS_DCACHE_OFF
+#define CONFIG_CMD_CACHE
+#endif
+
+#define CONFIG_CMD_BOOTZ
+#define CONFIG_SUPPORT_RAW_INITRD
+
+/* FS Configs */
+#define CONFIG_CMD_EXT3
+#define CONFIG_CMD_EXT4
+#define CONFIG_DOS_PARTITION
+#define CONFIG_CMD_FS_GENERIC
+
+#define CONFIG_BOOTP_SERVERIP
+#define CONFIG_BOOTP_BOOTFILE
+
+#endif /* __CONFIG_H */
diff --git a/include/configs/peach-pit.h b/include/configs/peach-pit.h
index 987cef5..ab8ac60 100644
--- a/include/configs/peach-pit.h
+++ b/include/configs/peach-pit.h
@@ -9,10 +9,16 @@
#ifndef __CONFIG_PEACH_PIT_H
#define __CONFIG_PEACH_PIT_H
-#include <configs/exynos5-dt.h>
+#define CONFIG_ENV_IS_IN_SPI_FLASH
+#define CONFIG_SPI_FLASH
+#define CONFIG_ENV_SPI_BASE 0x12D30000
+#define FLASH_SIZE (0x4 << 20)
+#define CONFIG_ENV_OFFSET (FLASH_SIZE - CONFIG_BL2_SIZE)
-#include <configs/exynos5420.h>
+#include <configs/exynos5420-common.h>
+#include <configs/exynos5-dt-common.h>
+#define CONFIG_BOARD_COMMON
/* select serial console configuration */
#define CONFIG_SERIAL3 /* use SERIAL 3 */
@@ -30,4 +36,10 @@
#define LCD_BPP LCD_COLOR16
#endif
+#define CONFIG_POWER_TPS65090_EC
+#define CONFIG_CROS_EC_SPI /* Support CROS_EC over SPI */
+
+#define CONFIG_USB_XHCI
+#define CONFIG_USB_XHCI_EXYNOS
+
#endif /* __CONFIG_PEACH_PIT_H */
diff --git a/include/configs/s5p_goni.h b/include/configs/s5p_goni.h
index a51215d..0c6e9c7 100644
--- a/include/configs/s5p_goni.h
+++ b/include/configs/s5p_goni.h
@@ -39,8 +39,9 @@
#define CONFIG_INITRD_TAG
#define CONFIG_CMDLINE_EDITING
-/* Size of malloc() pool.*/
-#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 80 * SZ_1M)
+/* Size of malloc() pool before and after relocation */
+#define CONFIG_SYS_MALLOC_F_LEN (1 << 10)
+#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (80 << 20))
/*
* select serial console configuration
@@ -53,6 +54,7 @@
#define CONFIG_MMC
#define CONFIG_SDHCI
#define CONFIG_S5P_SDHCI
+#define SDHCI_MAX_HOSTS 4
/* PWM */
#define CONFIG_PWM 1
@@ -106,7 +108,6 @@
",12m(modem)"\
",60m(qboot)\0"
-#define CONFIG_BOOTDELAY 1
#define CONFIG_ZERO_BOOTDELAY_CHECK
/* partitions definitions */
@@ -283,4 +284,6 @@
#define CONFIG_CMD_USB_MASS_STORAGE
#define CONFIG_USB_GADGET_MASS_STORAGE
+#define CONFIG_OF_LIBFDT
+
#endif /* __CONFIG_H */
diff --git a/include/configs/s5pc210_universal.h b/include/configs/s5pc210_universal.h
index 082d51c..27f3d0a 100644
--- a/include/configs/s5pc210_universal.h
+++ b/include/configs/s5pc210_universal.h
@@ -10,7 +10,7 @@
#ifndef __CONFIG_UNIVERSAL_H
#define __CONFIG_UNIVERSAL_H
-#include <configs/exynos4-dt.h>
+#include <configs/exynos4-common.h>
#define CONFIG_SYS_PROMPT "Universal # " /* Monitor Command Prompt */
@@ -27,9 +27,6 @@
#define SDRAM_BANK_SIZE (256 << 20) /* 256 MB */
-/* Size of malloc() pool */
-#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (80 * SZ_1M))
-
/* select serial console configuration */
#define CONFIG_SERIAL2
#define CONFIG_BAUDRATE 115200
diff --git a/include/configs/smdk5250.h b/include/configs/smdk5250.h
index 6117094..8395372 100644
--- a/include/configs/smdk5250.h
+++ b/include/configs/smdk5250.h
@@ -9,11 +9,26 @@
#ifndef __CONFIG_SMDK_H
#define __CONFIG_SMDK_H
-#include <configs/exynos5250-dt.h>
+#define CONFIG_ENV_IS_IN_SPI_FLASH
+#define CONFIG_SPI_FLASH
+#define CONFIG_ENV_SPI_BASE 0x12D30000
+#define FLASH_SIZE (0x4 << 20)
+#define CONFIG_ENV_OFFSET (FLASH_SIZE - CONFIG_BL2_SIZE)
+#define CONFIG_SPI_BOOTING
+#include <configs/exynos5250-common.h>
+
+
+#define CONFIG_BOARD_COMMON
+#define CONFIG_ARCH_EARLY_INIT_R
+
+#define CONFIG_USB_XHCI
+#define CONFIG_USB_XHCI_EXYNOS
+
+#define CONFIG_SYS_PROMPT "SMDK5250 # "
+#define CONFIG_IDENT_STRING " for SMDK5250"
-/* Enable FIT support and comparison */
-#define CONFIG_FIT
-#define CONFIG_FIT_BEST_MATCH
+/* Miscellaneous configurable options */
+#define CONFIG_DEFAULT_CONSOLE "console=ttySAC1,115200n8\0"
#endif /* __CONFIG_SMDK_H */
diff --git a/include/configs/smdk5420.h b/include/configs/smdk5420.h
index 36a156f..fd2d482 100644
--- a/include/configs/smdk5420.h
+++ b/include/configs/smdk5420.h
@@ -9,9 +9,9 @@
#ifndef __CONFIG_SMDK5420_H
#define __CONFIG_SMDK5420_H
-#include <configs/exynos5-dt.h>
+#include <configs/exynos5420-common.h>
-#include <configs/exynos5420.h>
+#define CONFIG_BOARD_COMMON
#define CONFIG_SMDK5420 /* which is in a SMDK5420 */
@@ -21,5 +21,6 @@
#define CONFIG_SYS_PROMPT "SMDK5420 # "
#define CONFIG_IDENT_STRING " for SMDK5420"
+#define CONFIG_DEFAULT_CONSOLE "console=ttySAC1,115200n8\0"
#endif /* __CONFIG_SMDK5420_H */
diff --git a/include/configs/smdkc100.h b/include/configs/smdkc100.h
index c9a2e15..22835ff 100644
--- a/include/configs/smdkc100.h
+++ b/include/configs/smdkc100.h
@@ -47,6 +47,10 @@
* 1MB = 0x100000, 0x100000 = 1024 * 1024
*/
#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (1 << 20))
+
+/* Small malloc pool before relocation */
+#define CONFIG_SYS_MALLOC_F_LEN (1 << 10)
+
/*
* select serial console configuration
*/
@@ -217,4 +221,6 @@
#define CONFIG_ENV_SROM_BANK 3 /* Select SROM Bank-3 for Ethernet*/
#endif /* CONFIG_CMD_NET */
+#define CONFIG_OF_LIBFDT
+
#endif /* __CONFIG_H */
diff --git a/include/configs/smdkv310.h b/include/configs/smdkv310.h
index 048c178..a2469eb 100644
--- a/include/configs/smdkv310.h
+++ b/include/configs/smdkv310.h
@@ -9,71 +9,42 @@
#ifndef __CONFIG_H
#define __CONFIG_H
+#include "exynos4-common.h"
+
+#undef CONFIG_BOARD_COMMON
+#undef CONFIG_USB_GADGET
+#undef CONFIG_USB_GADGET_S3C_UDC_OTG
+#undef CONFIG_CMD_USB_MASS_STORAGE
+#undef CONFIG_REVISION_TAG
+#undef CONFIG_CMD_THOR_DOWNLOAD
+#undef CONFIG_CMD_DFU
+
/* High Level Configuration Options */
-#define CONFIG_SAMSUNG 1 /* in a SAMSUNG core */
-#define CONFIG_S5P 1 /* S5P Family */
-#define CONFIG_EXYNOS4 /* EXYNOS4 Family */
#define CONFIG_EXYNOS4210 1 /* which is a EXYNOS4210 SoC */
#define CONFIG_SMDKV310 1 /* working with SMDKV310*/
-#include <asm/arch/cpu.h> /* get chip and board defs */
-
-#define CONFIG_ARCH_CPU_INIT
-#define CONFIG_DISPLAY_CPUINFO
-#define CONFIG_DISPLAY_BOARDINFO
-#define CONFIG_BOARD_EARLY_INIT_F
-
/* Mach Type */
#define CONFIG_MACH_TYPE MACH_TYPE_SMDKV310
#define CONFIG_SYS_SDRAM_BASE 0x40000000
#define CONFIG_SYS_TEXT_BASE 0x43E00000
-/* input clock of PLL: SMDKV310 has 24MHz input clock */
-#define CONFIG_SYS_CLK_FREQ 24000000
-
-#define CONFIG_SETUP_MEMORY_TAGS
-#define CONFIG_CMDLINE_TAG
-#define CONFIG_INITRD_TAG
-#define CONFIG_CMDLINE_EDITING
-
/* Handling Sleep Mode*/
#define S5P_CHECK_SLEEP 0x00000BAD
#define S5P_CHECK_DIDLE 0xBAD00000
#define S5P_CHECK_LPA 0xABAD0000
-/* Size of malloc() pool */
-#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (1 << 20))
-
/* select serial console configuration */
#define CONFIG_SERIAL1 1 /* use SERIAL 1 */
-#define CONFIG_BAUDRATE 115200
#define EXYNOS4_DEFAULT_UART_OFFSET 0x010000
-/* SD/MMC configuration */
-#define CONFIG_GENERIC_MMC
-#define CONFIG_MMC
-#define CONFIG_SDHCI
-#define CONFIG_S5P_SDHCI
-
-/* PWM */
-#define CONFIG_PWM 1
-
/* allow to overwrite serial and ethaddr */
#define CONFIG_ENV_OVERWRITE
-/* Command definition*/
-#include <config_cmd_default.h>
-
#define CONFIG_CMD_PING
#define CONFIG_CMD_ELF
#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_MMC
#define CONFIG_CMD_NET
-#define CONFIG_CMD_FAT
-
-#define CONFIG_BOOTDELAY 3
-#define CONFIG_ZERO_BOOTDELAY_CHECK
/* MMC SPL */
#define CONFIG_SKIP_LOWLEVEL_INIT
@@ -84,15 +55,8 @@
#define CONFIG_BOOTCOMMAND "fatload mmc 0 40007000 uImage; bootm 40007000"
/* Miscellaneous configurable options */
-#define CONFIG_SYS_LONGHELP /* undef to save memory */
-#define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */
#define CONFIG_SYS_PROMPT "SMDKV310 # "
-#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size*/
-#define CONFIG_SYS_PBSIZE 384 /* Print Buffer Size */
-#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
#define CONFIG_DEFAULT_CONSOLE "console=ttySAC2,115200n8\0"
-/* Boot Argument Buffer Size */
-#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
/* memtest works on */
#define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE
#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_SDRAM_BASE + 0x6000000)
@@ -111,8 +75,6 @@
#define PHYS_SDRAM_4_SIZE SDRAM_BANK_SIZE
/* FLASH and environment organization */
-#define CONFIG_SYS_NO_FLASH 1
-#undef CONFIG_CMD_IMLS
#define CONFIG_IDENT_STRING " for SMDKC210/V310"
#define CONFIG_CLK_1000_400_200
@@ -126,7 +88,6 @@
#define RESERVE_BLOCK_SIZE (512)
#define BL1_SIZE (16 << 10) /*16 K reserved for BL1*/
#define CONFIG_ENV_OFFSET (RESERVE_BLOCK_SIZE + BL1_SIZE)
-#define CONFIG_DOS_PARTITION 1
#define CONFIG_SPL_LDSCRIPT "board/samsung/common/exynos-uboot-spl.lds"
#define CONFIG_SPL_MAX_FOOTPRINT (14 * 1024)
@@ -146,6 +107,4 @@
#define CONFIG_ENV_SROM_BANK 1
#endif /*CONFIG_CMD_NET*/
-/* Enable devicetree support */
-#define CONFIG_OF_LIBFDT
#endif /* __CONFIG_H */
diff --git a/include/configs/snow.h b/include/configs/snow.h
index fbaaa59..7eaa586 100644
--- a/include/configs/snow.h
+++ b/include/configs/snow.h
@@ -9,11 +9,28 @@
#ifndef __CONFIG_SNOW_H
#define __CONFIG_SNOW_H
-#include <configs/exynos5250-dt.h>
+#define CONFIG_ENV_IS_IN_SPI_FLASH
+#define CONFIG_SPI_FLASH
+#define CONFIG_ENV_SPI_BASE 0x12D30000
+#define FLASH_SIZE (0x4 << 20)
+#define CONFIG_ENV_OFFSET (FLASH_SIZE - CONFIG_BL2_SIZE)
+#define CONFIG_SPI_BOOTING
+#include <configs/exynos5250-common.h>
+#include <configs/exynos5-dt-common.h>
+
+
+#define CONFIG_CROS_EC_I2C /* Support CROS_EC over I2C */
+#define CONFIG_POWER_TPS65090_I2C
+
+#define CONFIG_BOARD_COMMON
+#define CONFIG_ARCH_EARLY_INIT_R
+
+#define CONFIG_USB_XHCI
+#define CONFIG_USB_XHCI_EXYNOS
-/* Enable FIT support and comparison */
-#define CONFIG_FIT
-#define CONFIG_FIT_BEST_MATCH
+#define CONFIG_SYS_PROMPT "snow # "
+#define CONFIG_IDENT_STRING " for snow"
+#define CONFIG_DEFAULT_CONSOLE "console=ttySAC1,115200n8\0"
#endif /* __CONFIG_SNOW_H */
diff --git a/include/configs/socfpga_cyclone5.h b/include/configs/socfpga_cyclone5.h
index 8d54bf8..60d7e20 100644
--- a/include/configs/socfpga_cyclone5.h
+++ b/include/configs/socfpga_cyclone5.h
@@ -53,7 +53,7 @@
/* Ethernet on SoC (EMAC) */
#if defined(CONFIG_CMD_NET)
-#define CONFIG_EMAC_BASE SOCFPGA_EMAC0_ADDRESS
+#define CONFIG_EMAC_BASE SOCFPGA_EMAC1_ADDRESS
#define CONFIG_PHY_INTERFACE_MODE PHY_INTERFACE_MODE_RGMII
#define CONFIG_EPHY0_PHY_ADDR 0
diff --git a/include/configs/taurus.h b/include/configs/taurus.h
index 20d4cee..aadf4cd 100644
--- a/include/configs/taurus.h
+++ b/include/configs/taurus.h
@@ -24,6 +24,8 @@
#define MACH_TYPE_TAURUS 2067
#define MACH_TYPE_AXM 2068
+#define CONFIG_SYS_GENERIC_BOARD
+
/*
* Warning: changing CONFIG_SYS_TEXT_BASE requires
* adapting the initial boot program.
diff --git a/include/configs/trats.h b/include/configs/trats.h
index 43751e7..b21ea2d 100644
--- a/include/configs/trats.h
+++ b/include/configs/trats.h
@@ -10,7 +10,7 @@
#ifndef __CONFIG_TRATS_H
#define __CONFIG_TRATS_H
-#include <configs/exynos4-dt.h>
+#include <configs/exynos4-common.h>
#define CONFIG_SYS_PROMPT "Trats # " /* Monitor Command Prompt */
@@ -39,10 +39,6 @@
#define CONFIG_SYS_TEXT_BASE 0x63300000
-#include <linux/sizes.h>
-/* Size of malloc() pool */
-#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (80 * SZ_1M))
-
/* select serial console configuration */
#define CONFIG_SERIAL2
#define CONFIG_BAUDRATE 115200
diff --git a/include/configs/trats2.h b/include/configs/trats2.h
index e9a04f7..42481ab 100644
--- a/include/configs/trats2.h
+++ b/include/configs/trats2.h
@@ -11,7 +11,7 @@
#ifndef __CONFIG_TRATS2_H
#define __CONFIG_TRATS2_H
-#include <configs/exynos4-dt.h>
+#include <configs/exynos4-common.h>
#define CONFIG_SYS_PROMPT "Trats2 # " /* Monitor Command Prompt */
@@ -36,10 +36,6 @@
#define CONFIG_SYS_TEXT_BASE 0x43e00000
-#include <linux/sizes.h>
-/* Size of malloc() pool */
-#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (80 * SZ_1M))
-
/* select serial console configuration */
#define CONFIG_SERIAL2
#define CONFIG_BAUDRATE 115200
diff --git a/include/configs/vf610twr.h b/include/configs/vf610twr.h
index 0342550..6fd0b17 100644
--- a/include/configs/vf610twr.h
+++ b/include/configs/vf610twr.h
@@ -14,6 +14,7 @@
#define CONFIG_VF610
+#define CONFIG_SYS_GENERIC_BOARD
#define CONFIG_DISPLAY_CPUINFO
#define CONFIG_DISPLAY_BOARDINFO
@@ -44,6 +45,41 @@
#undef CONFIG_CMD_IMLS
+/* NAND support */
+#define CONFIG_CMD_NAND
+#define CONFIG_CMD_NAND_TRIMFFS
+
+#ifdef CONFIG_CMD_NAND
+#define CONFIG_NAND_VF610_NFC
+#define CONFIG_SYS_NAND_SELF_INIT
+#define CONFIG_USE_ARCH_MEMCPY
+#define CONFIG_SYS_NAND_BUSWIDTH_16BIT
+#define CONFIG_SYS_MAX_NAND_DEVICE 1
+#define CONFIG_SYS_NAND_BASE NFC_BASE_ADDR
+
+/* UBI */
+#define CONFIG_CMD_UBI
+#define CONFIG_CMD_UBIFS
+#define CONFIG_CMD_MTDPARTS
+#define CONFIG_RBTREE
+#define CONFIG_LZO
+#define CONFIG_MTD_DEVICE
+#define CONFIG_MTD_PARTITIONS
+
+/* Dynamic MTD partition support */
+#define CONFIG_CMD_MTDPARTS
+#define CONFIG_MTD_PARTITIONS
+#define CONFIG_MTD_DEVICE
+#define MTDIDS_DEFAULT "nand0=fsl_nfc"
+#define MTDPARTS_DEFAULT "mtdparts=fsl_nfc:" \
+ "128k(vf-bcb)ro," \
+ "1408k(u-boot)ro," \
+ "512k(u-boot-env)," \
+ "4m(kernel)," \
+ "512k(fdt)," \
+ "-(rootfs)"
+#endif
+
#define CONFIG_MMC
#define CONFIG_FSL_ESDHC
#define CONFIG_SYS_FSL_ESDHC_ADDR 0
@@ -218,11 +254,19 @@
/* FLASH and environment organization */
#define CONFIG_SYS_NO_FLASH
+#ifdef CONFIG_ENV_IS_IN_MMC
#define CONFIG_ENV_SIZE (8 * 1024)
-#define CONFIG_ENV_IS_IN_MMC
#define CONFIG_ENV_OFFSET (12 * 64 * 1024)
#define CONFIG_SYS_MMC_ENV_DEV 0
+#endif
+
+#ifdef CONFIG_ENV_IS_IN_NAND
+#define CONFIG_ENV_SIZE (64 * 2048)
+#define CONFIG_ENV_SECT_SIZE (64 * 2048)
+#define CONFIG_ENV_RANGE (512 * 1024)
+#define CONFIG_ENV_OFFSET 0x180000
+#endif
#define CONFIG_OF_LIBFDT
#define CONFIG_CMD_BOOTZ
diff --git a/include/configs/wandboard.h b/include/configs/wandboard.h
index 7d96908..9fb501a 100644
--- a/include/configs/wandboard.h
+++ b/include/configs/wandboard.h
@@ -110,6 +110,11 @@
#define CONFIG_IMX_HDMI
#define CONFIG_IMX_VIDEO_SKIP
+#define CONFIG_CMD_FUSE
+#ifdef CONFIG_CMD_FUSE
+#define CONFIG_MXC_OCOTP
+#endif
+
#if defined(CONFIG_MX6DL) || defined(CONFIG_MX6S)
#define CONFIG_DEFAULT_FDT_FILE "imx6dl-wandboard.dtb"
#elif defined(CONFIG_MX6Q)