ARM: dts: stm32f769: add display for STM32F769 disco board
Enable the display controller, mipi dsi bridge & panel.
Set panel display timings.
Signed-off-by: Yannick Fertré <yannick.fertre@st.com>
diff --git a/arch/arm/dts/stm32f769-disco-u-boot.dtsi b/arch/arm/dts/stm32f769-disco-u-boot.dtsi
index 209a82c..c1d7d6b 100644
--- a/arch/arm/dts/stm32f769-disco-u-boot.dtsi
+++ b/arch/arm/dts/stm32f769-disco-u-boot.dtsi
@@ -28,10 +28,72 @@
button-gpio = <&gpioa 0 0>;
};
+ dsi_host: dsi_host {
+ compatible = "synopsys,dw-mipi-dsi";
+ status = "okay";
+ };
+
led1 {
compatible = "st,led1";
led-gpio = <&gpioj 5 0>;
};
+
+ panel: panel {
+ compatible = "orisetech,otm8009a";
+ reset-gpios = <&gpioj 15 1>;
+ status = "okay";
+
+ port {
+ panel_in: endpoint {
+ remote-endpoint = <&dsi_out>;
+ };
+ };
+ };
+
+ soc {
+ dsi: dsi@40016c00 {
+ compatible = "st,stm32-dsi";
+ reg = <0x40016C00 0x800>;
+ resets = <&rcc STM32F7_APB2_RESET(DSI)>;
+ clocks = <&rcc 0 STM32F7_APB2_CLOCK(DSI)>,
+ <&rcc 0 STM32F7_APB2_CLOCK(LTDC)>,
+ <&clk_hse>;
+ clock-names = "pclk", "px_clk", "ref";
+ u-boot,dm-pre-reloc;
+ status = "okay";
+
+ ports {
+ port@0 {
+ dsi_out: endpoint {
+ remote-endpoint = <&panel_in>;
+ };
+ };
+ port@1 {
+ dsi_in: endpoint {
+ remote-endpoint = <&dp_out>;
+ };
+ };
+ };
+ };
+
+ ltdc: display-controller@40016800 {
+ compatible = "st,stm32-ltdc";
+ reg = <0x40016800 0x200>;
+ resets = <&rcc STM32F7_APB2_RESET(LTDC)>;
+ clocks = <&rcc 0 STM32F7_APB2_CLOCK(LTDC)>;
+
+ status = "okay";
+ u-boot,dm-pre-reloc;
+
+ ports {
+ port@0 {
+ dp_out: endpoint {
+ remote-endpoint = <&dsi_in>;
+ };
+ };
+ };
+ };
+ };
};
&fmc {