Fix low-level OHCI transfers for ARM920t and MPC5xxx
A new, Windows compatible init sequence was also backported from Linux 2.6,
but disabled with #undef NEW_INIT_SEQ as it wouldn't change the behaviour
of the memopry sticks we tested. Maybe it's not relevant for mass storage
devices. For recerence, see file common/usb.c, function usb_new_device(),
section #ifdef NEW_INIT_SEQ.
diff --git a/common/cmd_usb.c b/common/cmd_usb.c
index 4747592..3af8619 100644
--- a/common/cmd_usb.c
+++ b/common/cmd_usb.c
@@ -448,11 +448,17 @@
block_dev_desc_t *stor_dev;
#endif
- if ((strncmp(argv[1],"reset",5) == 0) ||
- (strncmp(argv[1],"start",5) == 0)){
+ if ((strncmp(argv[1], "reset", 5) == 0) ||
+ (strncmp(argv[1], "start", 5) == 0)){
usb_stop();
printf("(Re)start USB...\n");
- usb_init();
+ i = usb_init();
+#ifdef CONFIG_USB_STORAGE
+ /* try to recognize storage devices immediately */
+ if (i >= 0)
+ usb_stor_curr_dev = usb_stor_scan(1);
+
+#endif
return 0;
}
if (strncmp(argv[1],"stop",4) == 0) {
@@ -513,15 +519,18 @@
return 0;
}
#ifdef CONFIG_USB_STORAGE
- if (strncmp(argv[1],"scan",4) == 0) {
- printf("Scan for storage device:\n");
- usb_stor_curr_dev=usb_stor_scan(1);
- if (usb_stor_curr_dev==-1) {
- printf("No device found. Not initialized?\n");
- return 1;
- }
+ if (strncmp(argv[1], "scan", 4) == 0) {
+ printf(" NOTE: this command is obsolete and will be phased out\n");
+ printf(" please use 'usb storage' for USB storage devices information\n\n");
+ usb_stor_info();
return 0;
}
+
+ if (strncmp(argv[1], "stor", 4) == 0) {
+ usb_stor_info();
+ return 0;
+ }
+
if (strncmp(argv[1],"part",4) == 0) {
int devno, ok;
for (ok=0, devno=0; devno<USB_MAX_STOR_DEV; ++devno) {
@@ -560,8 +569,8 @@
return 1;
}
}
- if (strcmp(argv[1],"dev") == 0) {
- if (argc==3) {
+ if (strncmp(argv[1], "dev", 3) == 0) {
+ if (argc == 3) {
int dev = (int)simple_strtoul(argv[2], NULL, 10);
printf ("\nUSB device %d: ", dev);
if (dev >= USB_MAX_STOR_DEV) {
@@ -608,7 +617,7 @@
"usb stop [f] - stop USB [f]=force stop\n"
"usb tree - show USB device tree\n"
"usb info [dev] - show available USB devices\n"
- "usb scan - (re-)scan USB bus for storage devices\n"
+ "usb storage - show details of USB storage devices\n"
"usb dev [dev] - show or set current USB storage device\n"
"usb part [dev] - print partition table of one or all USB storage devices\n"
"usb read addr blk# cnt - read `cnt' blocks starting at block `blk#'\n"
diff --git a/common/usb.c b/common/usb.c
index 4136f8d..1738d95 100644
--- a/common/usb.c
+++ b/common/usb.c
@@ -37,6 +37,7 @@
#include <common.h>
#include <command.h>
#include <asm/processor.h>
+#include <linux/ctype.h>
#if (CONFIG_COMMANDS & CFG_CMD_USB)
@@ -46,7 +47,7 @@
#endif
-/* #define USB_DEBUG */
+#undef USB_DEBUG
#ifdef USB_DEBUG
#define USB_PRINTF(fmt,args...) printf (fmt ,##args)
@@ -70,6 +71,7 @@
int usb_hub_probe(struct usb_device *dev, int ifnum);
void usb_hub_reset(void);
+
/***********************************************************************
* wait_ms
*/
@@ -157,6 +159,7 @@
{
if((timeout==0)&&(!asynch_allowed)) /* request for a asynch control pipe is not allowed */
return -1;
+
/* set setup command */
setup_packet.requesttype = requesttype;
setup_packet.request = request;
@@ -330,8 +333,7 @@
int usb_clear_halt(struct usb_device *dev, int pipe)
{
int result;
- unsigned short status;
- int endp=usb_pipeendpoint(pipe)|(usb_pipein(pipe)<<7);
+ int endp = usb_pipeendpoint(pipe)|(usb_pipein(pipe)<<7);
result = usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
USB_REQ_CLEAR_FEATURE, USB_RECIP_ENDPOINT, 0, endp, NULL, 0, USB_CNTL_TIMEOUT * 3);
@@ -339,15 +341,14 @@
/* don't clear if failed */
if (result < 0)
return result;
- result = usb_control_msg(dev, usb_rcvctrlpipe(dev, 0),
- USB_REQ_GET_STATUS, USB_DIR_IN | USB_RECIP_ENDPOINT, 0, endp,
- &status, sizeof(status), USB_CNTL_TIMEOUT * 3);
- if (result < 0)
- return result;
- USB_PRINTF("usb_clear_halt: status 0x%x\n",status);
- if (status & 1)
- return -1; /* still halted */
+
+ /*
+ * NOTE: we do not get status and verify reset was successful
+ * as some devices are reported to lock up upon this check..
+ */
+
usb_endpoint_running(dev, usb_pipeendpoint(pipe), usb_pipeout(pipe));
+
/* toggle is reset on clear */
usb_settoggle(dev, usb_pipeendpoint(pipe), usb_pipeout(pipe), 0);
return 0;
@@ -423,7 +424,7 @@
struct usb_interface_descriptor *if_face = NULL;
int ret, i;
- for (i=0; i<dev->config.bNumInterfaces; i++) {
+ for (i = 0; i < dev->config.bNumInterfaces; i++) {
if (dev->config.if_desc[i].bInterfaceNumber == interface) {
if_face = &dev->config.if_desc[i];
break;
@@ -439,8 +440,6 @@
interface, NULL, 0, USB_CNTL_TIMEOUT * 5)) < 0)
return ret;
- if_face->act_altsetting = (unsigned char)alternate;
- usb_set_maxpacket(dev);
return 0;
}
@@ -511,11 +510,74 @@
*/
int usb_get_string(struct usb_device *dev, unsigned short langid, unsigned char index, void *buf, int size)
{
- return usb_control_msg(dev, usb_rcvctrlpipe(dev, 0),
- USB_REQ_GET_DESCRIPTOR, USB_DIR_IN,
- (USB_DT_STRING << 8) + index, langid, buf, size, USB_CNTL_TIMEOUT);
+ int i;
+ int result;
+
+ for (i = 0; i < 3; ++i) {
+ /* some devices are flaky */
+ result = usb_control_msg(dev, usb_rcvctrlpipe(dev, 0),
+ USB_REQ_GET_DESCRIPTOR, USB_DIR_IN,
+ (USB_DT_STRING << 8) + index, langid, buf, size,
+ USB_CNTL_TIMEOUT);
+
+ if (result > 0)
+ break;
+ }
+
+ return result;
}
+
+static void usb_try_string_workarounds(unsigned char *buf, int *length)
+{
+ int newlength, oldlength = *length;
+
+ for (newlength = 2; newlength + 1 < oldlength; newlength += 2)
+ if (!isprint(buf[newlength]) || buf[newlength + 1])
+ break;
+
+ if (newlength > 2) {
+ buf[0] = newlength;
+ *length = newlength;
+ }
+}
+
+
+static int usb_string_sub(struct usb_device *dev, unsigned int langid,
+ unsigned int index, unsigned char *buf)
+{
+ int rc;
+
+ /* Try to read the string descriptor by asking for the maximum
+ * possible number of bytes */
+ rc = usb_get_string(dev, langid, index, buf, 255);
+
+ /* If that failed try to read the descriptor length, then
+ * ask for just that many bytes */
+ if (rc < 2) {
+ rc = usb_get_string(dev, langid, index, buf, 2);
+ if (rc == 2)
+ rc = usb_get_string(dev, langid, index, buf, buf[0]);
+ }
+
+ if (rc >= 2) {
+ if (!buf[0] && !buf[1])
+ usb_try_string_workarounds(buf, &rc);
+
+ /* There might be extra junk at the end of the descriptor */
+ if (buf[0] < rc)
+ rc = buf[0];
+
+ rc = rc - (rc & 1); /* force a multiple of two */
+ }
+
+ if (rc < 2)
+ rc = -1;
+
+ return rc;
+}
+
+
/********************************************************************
* usb_string:
* Get string index and translate it to ascii.
@@ -535,7 +597,7 @@
/* get langid for strings if it's not yet known */
if (!dev->have_langid) {
- err = usb_get_string(dev, 0, 0, tbuf, 4);
+ err = usb_string_sub(dev, 0, 0, tbuf);
if (err < 0) {
USB_PRINTF("error getting string descriptor 0 (error=%x)\n",dev->status);
return -1;
@@ -550,22 +612,11 @@
dev->devnum, dev->string_langid);
}
}
- /* Just ask for a maximum length string and then take the length
- * that was returned. */
- err = usb_get_string(dev, dev->string_langid, index, tbuf, 4);
- if (err < 0)
- return err;
- u=tbuf[0];
- USB_PRINTF("Strn Len %d, index %d\n",u,index);
- if (u > USB_BUFSIZ) {
- USB_PRINTF("usb_string: failed to get string - too long: %d\n", u);
- return -1;
- }
-
- err = usb_get_string(dev, dev->string_langid, index, tbuf, u);
+ err = usb_string_sub(dev, dev->string_langid, index, tbuf);
if (err < 0)
return err;
+
size--; /* leave room for trailing NULL char in output buffer */
for (idx = 0, u = 2; u < err; u += 2) {
if (idx >= size)
@@ -641,11 +692,66 @@
/* We still haven't set the Address yet */
addr = dev->devnum;
dev->devnum = 0;
+
+#undef NEW_INIT_SEQ
+#ifdef NEW_INIT_SEQ
+ /* this is a Windows scheme of initialization sequence, with double
+ * reset of the device. Some equipment is said to work only with such
+ * init sequence; this patch is based on the work by Alan Stern:
+ * http://sourceforge.net/mailarchive/forum.php?thread_id=5729457&forum_id=5398
+ */
+ int j;
+ struct usb_device_descriptor *desc;
+ int port = -1;
+ struct usb_device *parent = dev->parent;
+ unsigned short portstatus;
+
+ /* send 64-byte GET-DEVICE-DESCRIPTOR request. Since the descriptor is
+ * only 18 bytes long, this will terminate with a short packet. But if
+ * the maxpacket size is 8 or 16 the device may be waiting to transmit
+ * some more. */
+
+ desc = (struct usb_device_descriptor *)tmpbuf;
+ desc->bMaxPacketSize0 = 0;
+ for (j = 0; j < 3; ++j) {
+ err = usb_get_descriptor(dev, USB_DT_DEVICE, 0, desc, 64);
+ if (err < 0) {
+ USB_PRINTF("usb_new_device: 64 byte descr\n");
+ break;
+ }
+ }
+ dev->descriptor.bMaxPacketSize0 = desc->bMaxPacketSize0;
+
+ /* find the port number we're at */
+ if (parent) {
+
+ for (j = 0; j < parent->maxchild; j++) {
+ if (parent->children[j] == dev) {
+ port = j;
+ break;
+ }
+ }
+ if (port < 0) {
+ printf("usb_new_device: cannot locate device's port..\n");
+ return 1;
+ }
+
+ /* reset the port for the second time */
+ err = hub_port_reset(dev->parent, port, &portstatus);
+ if (err < 0) {
+ printf("\n Couldn't reset port %i\n", port);
+ return 1;
+ }
+ }
+#else
+ /* and this is the old and known way of initializing devices */
err = usb_get_descriptor(dev, USB_DT_DEVICE, 0, &dev->descriptor, 8);
if (err < 8) {
printf("\n USB device not responding, giving up (status=%lX)\n",dev->status);
return 1;
}
+#endif
+
dev->epmaxpacketin [0] = dev->descriptor.bMaxPacketSize0;
dev->epmaxpacketout[0] = dev->descriptor.bMaxPacketSize0;
switch (dev->descriptor.bMaxPacketSize0) {
@@ -723,7 +829,7 @@
/* device 0 is always present (root hub, so let it analyze) */
dev=usb_alloc_new_device();
usb_new_device(dev);
- printf("%d USB Devices found\n",dev_index);
+ printf("%d USB Device(s) found\n",dev_index);
/* insert "driver" if possible */
#ifdef CONFIG_USB_KEYBOARD
drv_usb_kbd_init();
@@ -821,39 +927,15 @@
#define MAX_TRIES 5
-void usb_hub_port_connect_change(struct usb_device *dev, int port)
+static int hub_port_reset(struct usb_device *dev, int port,
+ unsigned short *portstat)
{
- struct usb_device *usb;
+ int tries;
struct usb_port_status portsts;
unsigned short portstatus, portchange;
- int tries;
- /* Check status */
- if (usb_get_port_status(dev, port + 1, &portsts)<0) {
- USB_HUB_PRINTF("get_port_status failed\n");
- return;
- }
-
- portstatus = swap_16(portsts.wPortStatus);
- portchange = swap_16(portsts.wPortChange);
- USB_HUB_PRINTF("portstatus %x, change %x, %s\n", portstatus, portchange,
- portstatus&(1<<USB_PORT_FEAT_LOWSPEED) ? "Low Speed" : "High Speed");
-
- /* Clear the connection change status */
- usb_clear_port_feature(dev, port + 1, USB_PORT_FEAT_C_CONNECTION);
-
- /* Disconnect any existing devices under this port */
- if (((!(portstatus & USB_PORT_STAT_CONNECTION)) &&
- (!(portstatus & USB_PORT_STAT_ENABLE)))|| (dev->children[port])) {
- USB_HUB_PRINTF("usb_disconnect(&hub->children[port]);\n");
- /* Return now if nothing is connected */
- if (!(portstatus & USB_PORT_STAT_CONNECTION))
- return;
- }
- wait_ms(200);
-
- /* Reset the port */
+ USB_HUB_PRINTF("hub_port_reset: resetting port %d...\n", port);
for(tries=0;tries<MAX_TRIES;tries++) {
usb_set_port_feature(dev, port + 1, USB_PORT_FEAT_RESET);
@@ -861,7 +943,7 @@
if (usb_get_port_status(dev, port + 1, &portsts)<0) {
USB_HUB_PRINTF("get_port_status failed status %lX\n",dev->status);
- return;
+ return -1;
}
portstatus = swap_16(portsts.wPortStatus);
portchange = swap_16(portsts.wPortChange);
@@ -873,10 +955,12 @@
(portstatus & USB_PORT_STAT_ENABLE) ? 1 : 0);
if ((portchange & USB_PORT_STAT_C_CONNECTION) ||
!(portstatus & USB_PORT_STAT_CONNECTION))
- return;
+ return -1;
- if (portstatus & USB_PORT_STAT_ENABLE)
+ if (portstatus & USB_PORT_STAT_ENABLE) {
+
break;
+ }
wait_ms(200);
}
@@ -884,10 +968,52 @@
if (tries==MAX_TRIES) {
USB_HUB_PRINTF("Cannot enable port %i after %i retries, disabling port.\n", port+1, MAX_TRIES);
USB_HUB_PRINTF("Maybe the USB cable is bad?\n");
- return;
+ return -1;
}
usb_clear_port_feature(dev, port + 1, USB_PORT_FEAT_C_RESET);
+ *portstat = portstatus;
+ return 0;
+
+}
+
+
+void usb_hub_port_connect_change(struct usb_device *dev, int port)
+{
+ struct usb_device *usb;
+ struct usb_port_status portsts;
+ unsigned short portstatus, portchange;
+
+ /* Check status */
+ if (usb_get_port_status(dev, port + 1, &portsts)<0) {
+ USB_HUB_PRINTF("get_port_status failed\n");
+ return;
+ }
+
+ portstatus = swap_16(portsts.wPortStatus);
+ portchange = swap_16(portsts.wPortChange);
+ USB_HUB_PRINTF("portstatus %x, change %x, %s\n", portstatus, portchange,
+ portstatus&(1<<USB_PORT_FEAT_LOWSPEED) ? "Low Speed" : "High Speed");
+
+ /* Clear the connection change status */
+ usb_clear_port_feature(dev, port + 1, USB_PORT_FEAT_C_CONNECTION);
+
+ /* Disconnect any existing devices under this port */
+ if (((!(portstatus & USB_PORT_STAT_CONNECTION)) &&
+ (!(portstatus & USB_PORT_STAT_ENABLE)))|| (dev->children[port])) {
+ USB_HUB_PRINTF("usb_disconnect(&hub->children[port]);\n");
+ /* Return now if nothing is connected */
+ if (!(portstatus & USB_PORT_STAT_CONNECTION))
+ return;
+ }
+ wait_ms(200);
+
+ /* Reset the port */
+ if (hub_port_reset(dev, port, &portstatus) < 0) {
+ printf("cannot reset port %i!?\n", port + 1);
+ return;
+ }
+
wait_ms(200);
/* Allocate a new device struct for it */
diff --git a/common/usb_storage.c b/common/usb_storage.c
index 605a1ce..5397bb2 100644
--- a/common/usb_storage.c
+++ b/common/usb_storage.c
@@ -121,7 +121,7 @@
#define UMASS_BBB_CSW_SIZE 13
#define USB_MAX_STOR_DEV 5
-static int usb_max_devs; /* number of highest available usb device */
+static int usb_max_devs = 0; /* number of highest available usb device */
static block_dev_desc_t usb_dev_desc[USB_MAX_STOR_DEV];
@@ -177,7 +177,24 @@
}
/*********************************************************************************
- * (re)-scan the usb and reports device info
+ * show info on storage devices; 'usb start/init' must be invoked earlier
+ * as we only retrieve structures populated during devices initialization
+ */
+void usb_stor_info(void)
+{
+ int i;
+
+ if (usb_max_devs > 0)
+ for (i = 0; i < usb_max_devs; i++) {
+ printf (" Device %d: ", i);
+ dev_print(&usb_dev_desc[i]);
+ }
+ else
+ printf("No storage devices, perhaps not 'usb start'ed..?\n");
+}
+
+/*********************************************************************************
+ * scan the usb and reports device info
* to the user if mode = 1
* returns current device or -1 if no
*/
@@ -190,7 +207,7 @@
memset(usb_stor_buf, 0, sizeof(usb_stor_buf));
if(mode==1) {
- printf(" scanning bus for storage devices...\n");
+ printf(" scanning bus for storage devices... ");
}
usb_disable_asynch(1); /* asynch transfer not allowed */
@@ -202,6 +219,7 @@
usb_dev_desc[i].part_type=PART_TYPE_UNKNOWN;
usb_dev_desc[i].block_read=usb_stor_read;
}
+
usb_max_devs=0;
for(i=0;i<USB_MAX_DEVICE;i++) {
dev=usb_get_dev_index(i); /* get device */
@@ -211,21 +229,17 @@
}
if(usb_storage_probe(dev,0,&usb_stor[usb_max_devs])) { /* ok, it is a storage devices */
/* get info and fill it in */
-
- if(usb_stor_get_info(dev, &usb_stor[usb_max_devs], &usb_dev_desc[usb_max_devs])) {
- if(mode==1) {
- printf (" Device %d: ", usb_max_devs);
- dev_print(&usb_dev_desc[usb_max_devs]);
- } /* if mode */
+ if(usb_stor_get_info(dev, &usb_stor[usb_max_devs], &usb_dev_desc[usb_max_devs]))
usb_max_devs++;
- } /* if get info ok */
} /* if storage device */
if(usb_max_devs==USB_MAX_STOR_DEV) {
printf("max USB Storage Device reached: %d stopping\n",usb_max_devs);
break;
}
} /* for */
+
usb_disable_asynch(0); /* asynch transfer allowed */
+ printf("%d Storage Device(s) found\n", usb_max_devs);
if(usb_max_devs>0)
return 0;
else
@@ -367,11 +381,13 @@
result = usb_control_msg(us->pusb_dev, usb_sndctrlpipe(us->pusb_dev,0),
US_BBB_RESET, USB_TYPE_CLASS | USB_RECIP_INTERFACE,
0, us->ifnum, 0, 0, USB_CNTL_TIMEOUT*5);
+
if((result < 0) && (us->pusb_dev->status & USB_ST_STALLED))
{
USB_STOR_PRINTF("RESET:stall\n");
return -1;
}
+
/* long wait for reset */
wait_ms(150);
USB_STOR_PRINTF("BBB_reset result %d: status %X reset\n",result,us->pusb_dev->status);
@@ -640,7 +656,9 @@
retry = 0;
again:
USB_STOR_PRINTF("STATUS phase\n");
- result = usb_bulk_msg(us->pusb_dev, pipein, &csw, UMASS_BBB_CSW_SIZE, &actlen, USB_CNTL_TIMEOUT*5);
+ result = usb_bulk_msg(us->pusb_dev, pipein, &csw, UMASS_BBB_CSW_SIZE,
+ &actlen, USB_CNTL_TIMEOUT*5);
+
/* special handling of STALL in STATUS phase */
if((result < 0) && (retry < 1) && (us->pusb_dev->status & USB_ST_STALLED)) {
USB_STOR_PRINTF("STATUS:stall\n");
@@ -797,7 +815,7 @@
static int usb_inquiry(ccb *srb,struct us_data *ss)
{
int retry,i;
- retry=3;
+ retry=5;
do {
memset(&srb->cmd[0],0,12);
srb->cmd[0]=SCSI_INQUIRY;
@@ -838,7 +856,7 @@
static int usb_test_unit_ready(ccb *srb,struct us_data *ss)
{
- int retries=10;
+ int retries = 10;
do {
memset(&srb->cmd[0],0,12);
@@ -859,7 +877,7 @@
static int usb_read_capacity(ccb *srb,struct us_data *ss)
{
int retry;
- retry=2; /* retries */
+ retry = 3; /* retries */
do {
memset(&srb->cmd[0],0,12);
srb->cmd[0]=SCSI_RD_CAPAC;
@@ -972,9 +990,6 @@
int protocol = 0;
int subclass = 0;
-
- memset(ss, 0, sizeof(struct us_data));
-
/* let's examine the device now */
iface = &dev->config.if_desc[ifnum];
@@ -996,6 +1011,8 @@
return 0;
}
+ memset(ss, 0, sizeof(struct us_data));
+
/* At this point, we know we've got a live one */
USB_STOR_PRINTF("\n\nUSB Mass Storage device detected\n");
@@ -1103,50 +1120,62 @@
unsigned char perq,modi;
unsigned long cap[2];
unsigned long *capacity,*blksz;
- ccb *pccb=&usb_ccb;
+ ccb *pccb = &usb_ccb;
- /* For some mysterious reason the 256MB flash disk of Ours Technology, Inc
- * doesn't survive this reset */
- if (dev->descriptor.idVendor != 0xea0 || dev->descriptor.idProduct != 0x6828)
+ /* for some reasons a couple of devices would not survive this reset */
+ if (
+ /* Sony USM256E */
+ (dev->descriptor.idVendor == 0x054c &&
+ dev->descriptor.idProduct == 0x019e)
+
+ ||
+ /* USB007 Mini-USB2 Flash Drive */
+ (dev->descriptor.idVendor == 0x066f &&
+ dev->descriptor.idProduct == 0x2010)
+ )
+ USB_STOR_PRINTF("usb_stor_get_info: skipping RESET..\n");
+ else
ss->transport_reset(ss);
- pccb->pdata=usb_stor_buf;
- dev_desc->target=dev->devnum;
- pccb->lun=dev_desc->lun;
+ pccb->pdata = usb_stor_buf;
+
+ dev_desc->target = dev->devnum;
+ pccb->lun = dev_desc->lun;
USB_STOR_PRINTF(" address %d\n",dev_desc->target);
if(usb_inquiry(pccb,ss))
return -1;
- perq=usb_stor_buf[0];
- modi=usb_stor_buf[1];
- if((perq & 0x1f)==0x1f) {
+
+ perq = usb_stor_buf[0];
+ modi = usb_stor_buf[1];
+ if((perq & 0x1f) == 0x1f) {
return 0; /* skip unknown devices */
}
- if((modi&0x80)==0x80) {/* drive is removable */
- dev_desc->removable=1;
+ if((modi&0x80) == 0x80) {/* drive is removable */
+ dev_desc->removable = 1;
}
memcpy(&dev_desc->vendor[0], &usb_stor_buf[8], 8);
memcpy(&dev_desc->product[0], &usb_stor_buf[16], 16);
memcpy(&dev_desc->revision[0], &usb_stor_buf[32], 4);
- dev_desc->vendor[8]=0;
- dev_desc->product[16]=0;
- dev_desc->revision[4]=0;
+ dev_desc->vendor[8] = 0;
+ dev_desc->product[16] = 0;
+ dev_desc->revision[4] = 0;
USB_STOR_PRINTF("ISO Vers %X, Response Data %X\n",usb_stor_buf[2],usb_stor_buf[3]);
if(usb_test_unit_ready(pccb,ss)) {
printf("Device NOT ready\n Request Sense returned %02X %02X %02X\n",pccb->sense_buf[2],pccb->sense_buf[12],pccb->sense_buf[13]);
- if(dev_desc->removable==1) {
- dev_desc->type=perq;
+ if(dev_desc->removable == 1) {
+ dev_desc->type = perq;
return 1;
}
else
return 0;
}
- pccb->pdata=(unsigned char *)&cap[0];
+ pccb->pdata = (unsigned char *)&cap[0];
memset(pccb->pdata,0,8);
- if(usb_read_capacity(pccb,ss)!=0) {
+ if(usb_read_capacity(pccb,ss) != 0) {
printf("READ_CAP ERROR\n");
- cap[0]=2880;
- cap[1]=0x200;
+ cap[0] = 2880;
+ cap[1] = 0x200;
}
USB_STOR_PRINTF("Read Capacity returns: 0x%lx, 0x%lx\n",cap[0],cap[1]);
#if 0
@@ -1166,13 +1195,13 @@
(((unsigned long)(cap[1]) & (unsigned long)0xff000000UL) >> 24) ));
#endif
/* this assumes bigendian! */
- cap[0]+=1;
- capacity=&cap[0];
- blksz=&cap[1];
+ cap[0] += 1;
+ capacity = &cap[0];
+ blksz = &cap[1];
USB_STOR_PRINTF("Capacity = 0x%lx, blocksz = 0x%lx\n",*capacity,*blksz);
- dev_desc->lba=*capacity;
- dev_desc->blksz=*blksz;
- dev_desc->type=perq;
+ dev_desc->lba = *capacity;
+ dev_desc->blksz = *blksz;
+ dev_desc->type = perq;
USB_STOR_PRINTF(" address %d\n",dev_desc->target);
USB_STOR_PRINTF("partype: %d\n",dev_desc->part_type);