mmc: tegra: move pad_init_mmc() into MMC driver
pad_init_mmc() is performing an SoC-specific operation, using registers
within the MMC controller. There's no reason to implement this code
outside the MMC driver, so move it inside the driver.
Cc: Jaehoon Chung <jh80.chung@samsung.com>
Signed-off-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Tom Warren <twarren@nvidia.com>
diff --git a/arch/arm/include/asm/arch-tegra/tegra_mmc.h b/arch/arm/include/asm/arch-tegra/tegra_mmc.h
index 07ef4c0..fecb659 100644
--- a/arch/arm/include/asm/arch-tegra/tegra_mmc.h
+++ b/arch/arm/include/asm/arch-tegra/tegra_mmc.h
@@ -151,7 +151,5 @@
struct mmc_config cfg; /* mmc configuration */
};
-void pad_init_mmc(struct mmc_host *host);
-
#endif /* __ASSEMBLY__ */
#endif /* __TEGRA_MMC_H_ */
diff --git a/arch/arm/mach-tegra/board186.c b/arch/arm/mach-tegra/board186.c
index 1b9799f..8b76205 100644
--- a/arch/arm/mach-tegra/board186.c
+++ b/arch/arm/mach-tegra/board186.c
@@ -7,7 +7,6 @@
#include <common.h>
#include <asm/arch/tegra.h>
#include <asm/arch-tegra/mmc.h>
-#include <asm/arch-tegra/tegra_mmc.h>
DECLARE_GLOBAL_DATA_PTR;
@@ -31,10 +30,6 @@
return 0;
}
-void pad_init_mmc(struct mmc_host *host)
-{
-}
-
int board_mmc_init(bd_t *bd)
{
tegra_mmc_init();
diff --git a/arch/arm/mach-tegra/board2.c b/arch/arm/mach-tegra/board2.c
index 9158ace..e3cdb00 100644
--- a/arch/arm/mach-tegra/board2.c
+++ b/arch/arm/mach-tegra/board2.c
@@ -33,7 +33,6 @@
#include <usb.h>
#endif
#ifdef CONFIG_TEGRA_MMC
-#include <asm/arch-tegra/tegra_mmc.h>
#include <asm/arch-tegra/mmc.h>
#endif
#include <asm/arch-tegra/xusb-padctl.h>
@@ -248,34 +247,6 @@
return 0;
}
-
-void pad_init_mmc(struct mmc_host *host)
-{
-#if defined(CONFIG_TEGRA30)
- enum periph_id id = host->mmc_id;
- u32 val;
-
- debug("%s: sdmmc address = %08x, id = %d\n", __func__,
- (unsigned int)host->reg, id);
-
- /* Set the pad drive strength for SDMMC1 or 3 only */
- if (id != PERIPH_ID_SDMMC1 && id != PERIPH_ID_SDMMC3) {
- debug("%s: settings are only valid for SDMMC1/SDMMC3!\n",
- __func__);
- return;
- }
-
- val = readl(&host->reg->sdmemcmppadctl);
- val &= 0xFFFFFFF0;
- val |= MEMCOMP_PADCTRL_VREF;
- writel(val, &host->reg->sdmemcmppadctl);
-
- val = readl(&host->reg->autocalcfg);
- val &= 0xFFFF0000;
- val |= AUTO_CAL_PU_OFFSET | AUTO_CAL_PD_OFFSET | AUTO_CAL_ENABLED;
- writel(val, &host->reg->autocalcfg);
-#endif /* T30 */
-}
#endif /* MMC */
/*
diff --git a/drivers/mmc/tegra_mmc.c b/drivers/mmc/tegra_mmc.c
index 08b4bd4..5e6cfe7 100644
--- a/drivers/mmc/tegra_mmc.c
+++ b/drivers/mmc/tegra_mmc.c
@@ -448,6 +448,34 @@
debug("mmc_set_ios: hostctl = %08X\n", ctrl);
}
+static void pad_init_mmc(struct mmc_host *host)
+{
+#if defined(CONFIG_TEGRA30)
+ enum periph_id id = host->mmc_id;
+ u32 val;
+
+ debug("%s: sdmmc address = %08x, id = %d\n", __func__,
+ (unsigned int)host->reg, id);
+
+ /* Set the pad drive strength for SDMMC1 or 3 only */
+ if (id != PERIPH_ID_SDMMC1 && id != PERIPH_ID_SDMMC3) {
+ debug("%s: settings are only valid for SDMMC1/SDMMC3!\n",
+ __func__);
+ return;
+ }
+
+ val = readl(&host->reg->sdmemcmppadctl);
+ val &= 0xFFFFFFF0;
+ val |= MEMCOMP_PADCTRL_VREF;
+ writel(val, &host->reg->sdmemcmppadctl);
+
+ val = readl(&host->reg->autocalcfg);
+ val &= 0xFFFF0000;
+ val |= AUTO_CAL_PU_OFFSET | AUTO_CAL_PD_OFFSET | AUTO_CAL_ENABLED;
+ writel(val, &host->reg->autocalcfg);
+#endif
+}
+
static void mmc_reset(struct mmc_host *host, struct mmc *mmc)
{
unsigned int timeout;