arm: mach-k3: Move sysfw-loader into R5 directory
SYSFW is only ever loaded by the R5 core, move the code into that
directory. While here also move the related Kconfig symbols.
Signed-off-by: Andrew Davis <afd@ti.com>
diff --git a/arch/arm/mach-k3/Kconfig b/arch/arm/mach-k3/Kconfig
index 6ed0719..c95a419 100644
--- a/arch/arm/mach-k3/Kconfig
+++ b/arch/arm/mach-k3/Kconfig
@@ -109,53 +109,6 @@
Use this option to set the index of the serial device to be used
for the early console during SPL execution.
-config K3_LOAD_SYSFW
- bool
- depends on CPU_V7R
-
-config K3_SYSFW_IMAGE_NAME
- string "File name of SYSFW firmware and configuration blob"
- depends on K3_LOAD_SYSFW
- default "sysfw.itb"
- help
- Filename of the combined System Firmware and configuration image tree
- blob to be loaded when booting from a filesystem.
-
-config K3_SYSFW_IMAGE_MMCSD_RAW_MODE_SECT
- hex "MMC sector to load SYSFW firmware and configuration blob from"
- depends on K3_LOAD_SYSFW && SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR
- default 0x3600
- help
- Address on the MMC to load the combined System Firmware and
- configuration image tree blob from, when the MMC is being used
- in raw mode. Units: MMC sectors (1 sector = 512 bytes).
-
-config K3_SYSFW_IMAGE_MMCSD_RAW_MODE_PART
- hex "MMC partition to load SYSFW firmware and configuration blob from"
- depends on K3_LOAD_SYSFW && SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION
- default 2
- help
- Partition on the MMC to the combined System Firmware and configuration
- image tree blob from, when the MMC is being used in raw mode.
-
-config K3_SYSFW_IMAGE_SIZE_MAX
- int "Amount of memory dynamically allocated for loading SYSFW blob"
- depends on K3_LOAD_SYSFW
- default 280000
- help
- Amount of memory (in bytes) reserved through dynamic allocation at
- runtime for loading the combined System Firmware and configuration image
- tree blob. Keep it as tight as possible, as this directly affects the
- overall SPL memory footprint.
-
-config K3_SYSFW_IMAGE_SPI_OFFS
- hex "SPI offset of SYSFW firmware and configuration blob"
- depends on K3_LOAD_SYSFW
- default 0x6C0000
- help
- Offset of the combined System Firmware and configuration image tree
- blob to be loaded when booting from a SPI flash memory.
-
config SYS_K3_SPL_ATF
bool "Start Cortex-A from SPL"
depends on CPU_V7R
@@ -187,6 +140,10 @@
help
SWRV for X509 certificate used for boot images
+if CPU_V7R
+source "arch/arm/mach-k3/r5/Kconfig"
+endif
+
source "arch/arm/mach-k3/am65x/Kconfig"
source "arch/arm/mach-k3/am64x/Kconfig"
source "arch/arm/mach-k3/am62x/Kconfig"