avr32: Add simple paging support
Use the MMU hardware to set up 1:1 mappings between physical and virtual
addresses. This allows us to bypass the cache when accessing the flash
without having to do any physical-to-virtual address mapping in the CFI
driver.
The virtual memory mappings are defined at compile time through a sorted
array of virtual memory range objects. When a TLB miss exception
happens, the exception handler does a binary search through the array
until it finds a matching entry and loads it into the TLB. The u-boot
image itself is covered by a fixed TLB entry which is never replaced.
This makes the 'saveenv' command work again on ATNGW100 and other boards
using the CFI driver, hopefully without breaking any rules.
Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
diff --git a/include/configs/atngw100.h b/include/configs/atngw100.h
index 4ed5514..83056b6 100644
--- a/include/configs/atngw100.h
+++ b/include/configs/atngw100.h
@@ -49,6 +49,9 @@
#define CONFIG_SYS_CLKDIV_PBA 2
#define CONFIG_SYS_CLKDIV_PBB 1
+/* Reserve VM regions for SDRAM and NOR flash */
+#define CONFIG_SYS_NR_VM_REGIONS 2
+
/*
* The PLLOPT register controls the PLL like this:
* icp = PLLOPT<2>
diff --git a/include/configs/atstk1002.h b/include/configs/atstk1002.h
index b258f2d..6416d17 100644
--- a/include/configs/atstk1002.h
+++ b/include/configs/atstk1002.h
@@ -73,6 +73,9 @@
*/
#define CONFIG_SYS_CLKDIV_PBB 1
+/* Reserve VM regions for SDRAM and NOR flash */
+#define CONFIG_SYS_NR_VM_REGIONS 2
+
/*
* The PLLOPT register controls the PLL like this:
* icp = PLLOPT<2>
diff --git a/include/configs/atstk1003.h b/include/configs/atstk1003.h
index 2ef2552..a4d9b0b 100644
--- a/include/configs/atstk1003.h
+++ b/include/configs/atstk1003.h
@@ -73,6 +73,9 @@
*/
#define CONFIG_SYS_CLKDIV_PBB 1
+/* Reserve VM regions for SDRAM and NOR flash */
+#define CONFIG_SYS_NR_VM_REGIONS 2
+
/*
* The PLLOPT register controls the PLL like this:
* icp = PLLOPT<2>
diff --git a/include/configs/atstk1004.h b/include/configs/atstk1004.h
index 195be82..06bb5da 100644
--- a/include/configs/atstk1004.h
+++ b/include/configs/atstk1004.h
@@ -73,6 +73,9 @@
*/
#define CONFIG_SYS_CLKDIV_PBB 1
+/* Reserve VM regions for SDRAM and NOR flash */
+#define CONFIG_SYS_NR_VM_REGIONS 2
+
/*
* The PLLOPT register controls the PLL like this:
* icp = PLLOPT<2>
diff --git a/include/configs/atstk1006.h b/include/configs/atstk1006.h
index f93118e..d3cbee6 100644
--- a/include/configs/atstk1006.h
+++ b/include/configs/atstk1006.h
@@ -73,6 +73,9 @@
*/
#define CONFIG_SYS_CLKDIV_PBB 1
+/* Reserve VM regions for SDRAM and NOR flash */
+#define CONFIG_SYS_NR_VM_REGIONS 2
+
/*
* The PLLOPT register controls the PLL like this:
* icp = PLLOPT<2>
diff --git a/include/configs/favr-32-ezkit.h b/include/configs/favr-32-ezkit.h
index 739ff0d..1c381c7 100644
--- a/include/configs/favr-32-ezkit.h
+++ b/include/configs/favr-32-ezkit.h
@@ -70,6 +70,9 @@
*/
#define CONFIG_SYS_CLKDIV_PBB 1
+/* Reserve VM regions for SDRAM and NOR flash */
+#define CONFIG_SYS_NR_VM_REGIONS 2
+
/*
* The PLLOPT register controls the PLL like this:
* icp = PLLOPT<2>
diff --git a/include/configs/hammerhead.h b/include/configs/hammerhead.h
index 0c70af5..8ca04ea 100644
--- a/include/configs/hammerhead.h
+++ b/include/configs/hammerhead.h
@@ -47,6 +47,9 @@
#define CONFIG_SYS_CLKDIV_PBA 2
#define CONFIG_SYS_CLKDIV_PBB 1
+/* Reserve VM regions for SDRAM and NOR flash */
+#define CONFIG_SYS_NR_VM_REGIONS 2
+
/*
* The PLLOPT register controls the PLL like this:
* icp = PLLOPT<2>
diff --git a/include/configs/mimc200.h b/include/configs/mimc200.h
index 36488b3..6ed9e75 100644
--- a/include/configs/mimc200.h
+++ b/include/configs/mimc200.h
@@ -51,6 +51,9 @@
#define CONFIG_SYS_CLKDIV_PBA 2
#define CONFIG_SYS_CLKDIV_PBB 1
+/* Reserve VM regions for SDRAM, NOR flash and FRAM */
+#define CONFIG_SYS_NR_VM_REGIONS 3
+
/*
* The PLLOPT register controls the PLL like this:
* icp = PLLOPT<2>