Merge ../u-boot
diff --git a/Makefile b/Makefile
index 8d500f5..63e7dcb 100644
--- a/Makefile
+++ b/Makefile
@@ -144,7 +144,7 @@
CROSS_COMPILE = m68k-elf-
endif
ifeq ($(ARCH),microblaze)
-CROSS_COMPILE = mb-
+CROSS_COMPILE = microblaze-uclinux-
endif
ifeq ($(ARCH),blackfin)
CROSS_COMPILE = bfin-uclinux-
@@ -201,8 +201,9 @@
LIBS += cpu/ixp/npe/libnpe.a
endif
LIBS += lib_$(ARCH)/lib$(ARCH).a
-LIBS += fs/cramfs/libcramfs.a fs/fat/libfat.a fs/fdos/libfdos.a fs/jffs2/libjffs2.a \
- fs/reiserfs/libreiserfs.a fs/ext2/libext2fs.a
+LIBS += fs/cramfs/libcramfs.a fs/ext2/libext2fs.a fs/fat/libfat.a \
+ fs/fdos/libfdos.a fs/jffs2/libjffs2.a fs/reiserfs/libreiserfs.a \
+ fs/romfs/libromfs.a
LIBS += net/libnet.a
LIBS += disk/libdisk.a
LIBS += rtc/librtc.a
@@ -325,14 +326,14 @@
tags ctags:
ctags -w -o $(OBJTREE)/ctags `find $(SUBDIRS) include \
lib_generic board/$(BOARDDIR) cpu/$(CPU) lib_$(ARCH) \
- fs/cramfs fs/fat fs/fdos fs/jffs2 \
+ fs/cramfs fs/fat fs/fdos fs/jffs2 fs/romfs\
net disk rtc dtt drivers drivers/sk98lin common \
\( -name CVS -prune \) -o \( -name '*.[ch]' -print \)`
etags:
etags -a -o $(OBJTREE)/etags `find $(SUBDIRS) include \
lib_generic board/$(BOARDDIR) cpu/$(CPU) lib_$(ARCH) \
- fs/cramfs fs/fat fs/fdos fs/jffs2 \
+ fs/cramfs fs/fat fs/fdos fs/jffs2 fs/romfs\
net disk rtc dtt drivers drivers/sk98lin common \
\( -name CVS -prune \) -o \( -name '*.[ch]' -print \)`
diff --git a/board/xilinx/xupv2p/Makefile b/board/xilinx/xupv2p/Makefile
index 9ab5633..99e7047 100644
--- a/board/xilinx/xupv2p/Makefile
+++ b/board/xilinx/xupv2p/Makefile
@@ -22,32 +22,17 @@
#
include $(TOPDIR)/config.mk
-ifneq ($(OBJTREE),$(SRCTREE))
-$(shell mkdir -p $(obj)../common)
-$(shell mkdir -p $(obj)../xilinx_enet)
-endif
-
-INCS := -I../common -I../xilinx_enet
-CFLAGS += $(INCS)
-HOST_CFLAGS += $(INCS)
LIB = $(obj)lib$(BOARD).a
-COBJS = $(BOARD).o \
- ../xilinx_enet/emac_adapter.o ../xilinx_enet/xemac.o \
- ../xilinx_enet/xemac_options.o ../xilinx_enet/xemac_polled.o \
- ../xilinx_enet/xemac_intr.o ../xilinx_enet/xemac_g.o \
- ../xilinx_enet/xemac_intr_dma.o ../common/xipif_v1_23_b.o \
- ../common/xbasic_types.o ../common/xdma_channel.o \
- ../common/xdma_channel_sg.o ../common/xpacket_fifo_v1_00_b.o \
- ../common/xversion.o \
+COBJS = $(BOARD).o
SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
OBJS := $(addprefix $(obj),$(COBJS))
SOBJS := $(addprefix $(obj),$(SOBJS))
-$(LIB): $(OBJS) $(SOBJS)
- $(AR) $(ARFLAGS) $@ $^
+$(LIB): $(obj).depend $(OBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS)
clean:
rm -f $(SOBJS) $(OBJS)
diff --git a/board/xilinx/xupv2p/config.mk b/board/xilinx/xupv2p/config.mk
index c07b0b3..eedfb24 100644
--- a/board/xilinx/xupv2p/config.mk
+++ b/board/xilinx/xupv2p/config.mk
@@ -25,8 +25,8 @@
# Version: Xilinx EDK 8.2.02 EDK_Im_Sp2.4
#
-TEXT_BASE = 0x38000000
+TEXT_BASE = 0x30000000
+PLATFORM_CPPFLAGS += -mxl-pattern-compare
PLATFORM_CPPFLAGS += -mno-xl-soft-mul
-PLATFORM_CPPFLAGS += -mno-xl-soft-div
-PLATFORM_CPPFLAGS += -mxl-barrel-shift
+PLATFORM_CPPFLAGS += -mcpu=v5.00.c
diff --git a/board/xilinx/xupv2p/xparameters.h b/board/xilinx/xupv2p/xparameters.h
index a96c693..0bb7a80 100644
--- a/board/xilinx/xupv2p/xparameters.h
+++ b/board/xilinx/xupv2p/xparameters.h
@@ -28,17 +28,24 @@
/* System Clock Frequency */
#define XILINX_CLOCK_FREQ 100000000
+/* Microblaze is microblaze_0 */
+#define XILINX_USE_MSR_INSTR 1
+#define XILINX_PVR 0
+#define XILINX_FSL_NUMBER 0
+
/* Interrupt controller is opb_intc_0 */
#define XILINX_INTC_BASEADDR 0x41200000
-#define XILINX_INTC_NUM_INTR_INPUTS 11
+#define XILINX_INTC_NUM_INTR_INPUTS 7
/* Timer pheriphery is opb_timer_1 */
#define XILINX_TIMER_BASEADDR 0x41c00000
-#define XILINX_TIMER_IRQ 1
+#define XILINX_TIMER_IRQ 0
/* Uart pheriphery is RS232_Uart_1 */
-#define XILINX_UART_BASEADDR 0x40600000
-#define XILINX_UART_BAUDRATE 115200
+#define XILINX_UARTLITE_BASEADDR 0x40600000
+#define XILINX_UARTLITE_BAUDRATE 115200
+
+/* IIC doesn't exist */
/* GPIO is LEDs_4Bit*/
#define XILINX_GPIO_BASEADDR 0x40000000
@@ -51,14 +58,10 @@
/* Sysace Controller is SysACE_CompactFlash */
#define XILINX_SYSACE_BASEADDR 0x41800000
-#define XILINX_SYSACE_HIGHADDR 0x4180ffff
#define XILINX_SYSACE_MEM_WIDTH 16
/* Ethernet controller is Ethernet_MAC */
-#define XPAR_XEMAC_NUM_INSTANCES 1
-#define XPAR_OPB_ETHERNET_0_DEVICE_ID 0
-#define XPAR_OPB_ETHERNET_0_BASEADDR 0x40c00000
-#define XPAR_OPB_ETHERNET_0_HIGHADDR 0x40c0ffff
-#define XPAR_OPB_ETHERNET_0_DMA_PRESENT 1
-#define XPAR_OPB_ETHERNET_0_ERR_COUNT_EXIST 1
-#define XPAR_OPB_ETHERNET_0_MII_EXIST 1
+#define XILINX_EMAC_BASEADDR 0x40c00000
+#define XILINX_EMAC_DMA_PRESENT 3
+#define XILINX_EMAC_HALF_DUPLEX_EXIST 1
+#define XILINX_EMAC_MII_EXIST 1
diff --git a/common/cmd_jffs2.c b/common/cmd_jffs2.c
index 513a226..3e6061a 100644
--- a/common/cmd_jffs2.c
+++ b/common/cmd_jffs2.c
@@ -85,7 +85,7 @@
*/
/*
- * JFFS2/CRAMFS support
+ * JFFS2/CRAMFS/ROMFS support
*/
#include <common.h>
#include <command.h>
@@ -175,6 +175,11 @@
extern int cramfs_ls (struct part_info *info, char *filename);
extern int cramfs_info (struct part_info *info);
+extern int romfs_check (struct part_info *info);
+extern int romfs_load (char *loadoffset, struct part_info *info, char *filename);
+extern int romfs_ls (struct part_info *info, char *filename);
+extern int romfs_info (struct part_info *info);
+
static struct part_info* jffs2_part_info(struct mtd_device *dev, unsigned int part_num);
/* command line only routines */
@@ -1874,14 +1879,22 @@
if ((part = jffs2_part_info(current_dev, current_partnum))){
- /* check partition type for cramfs */
- fsname = (cramfs_check(part) ? "CRAMFS" : "JFFS2");
+ /* check partition type for JFFS2, cramfs, romfs */
+ if (cramfs_check(part)) {
+ fsname = "CRAMFS";
+ } else if (romfs_check(part)) {
+ fsname = "ROMFS";
+ } else {
+ fsname = "JFFS2";
+ }
printf("### %s loading '%s' to 0x%lx\n", fsname, filename, offset);
if (cramfs_check(part)) {
size = cramfs_load ((char *) offset, part, filename);
+ } else if (romfs_check(part)){
+ size = romfs_load ((char *) offset, part, filename);
} else {
- /* if this is not cramfs assume jffs2 */
+ /* if this is not cramfs or romfs assume jffs2 */
size = jffs2_1pass_load((char *)offset, part, filename);
}
@@ -1928,8 +1941,10 @@
/* check partition type for cramfs */
if (cramfs_check(part)) {
ret = cramfs_ls (part, filename);
+ } else if (romfs_check(part)) {
+ ret = romfs_ls (part, filename);
} else {
- /* if this is not cramfs assume jffs2 */
+ /* if this is not cramfs or romfs assume jffs2 */
ret = jffs2_1pass_ls(part, filename);
}
@@ -1951,7 +1966,6 @@
int do_jffs2_fsinfo(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
{
struct part_info *part;
- char *fsname;
int ret;
/* make sure we are in sync with env variables */
@@ -1961,13 +1975,17 @@
if ((part = jffs2_part_info(current_dev, current_partnum))){
/* check partition type for cramfs */
- fsname = (cramfs_check(part) ? "CRAMFS" : "JFFS2");
- printf("### filesystem type is %s\n", fsname);
+ puts("### filesystem type is ");
if (cramfs_check(part)) {
+ puts("CRAMFS\n");
ret = cramfs_info (part);
+ } else if (romfs_check(part)) {
+ puts("ROMFS\n");
+ ret = romfs_info (part);
} else {
- /* if this is not cramfs assume jffs2 */
+ /* if this is not cramfs or romfs assume jffs2 */
+ puts("JFFS2\n");
ret = jffs2_1pass_info(part);
}
diff --git a/common/cmd_mfsl.c b/common/cmd_mfsl.c
index 8d4c1a3..93cc873 100644
--- a/common/cmd_mfsl.c
+++ b/common/cmd_mfsl.c
@@ -357,7 +357,7 @@
reg = (unsigned int)simple_strtoul (argv[1], NULL, 16);
val = (unsigned int)simple_strtoul (argv[2], NULL, 16);
- if (argc < 1) {
+ if (argc < 2) {
printf ("Usage:\n%s\n", cmdtp->usage);
return 1;
}
@@ -382,6 +382,7 @@
puts ("ESR");
break;
default:
+ puts ("Unsupported register\n");
return 1;
}
printf (": 0x%08lx\n", val);
@@ -408,10 +409,10 @@
" 3 - blocking control write\n");
U_BOOT_CMD (rspr, 3, 1, do_rspr,
- "rmsr - read/write special purpose register\n",
+ "rspr - read/write special purpose register\n",
"- reg_num [write value] read/write special purpose register\n"
- " 0 - MSR - Machine status register\n"
- " 1 - EAR - Exception address register\n"
- " 2 - ESR - Exception status register\n");
+ " 1 - MSR - Machine status register\n"
+ " 3 - EAR - Exception address register\n"
+ " 5 - ESR - Exception status register\n");
#endif
diff --git a/cpu/microblaze/cache.c b/cpu/microblaze/cache.c
index 6ce0b55..4b7866f 100644
--- a/cpu/microblaze/cache.c
+++ b/cpu/microblaze/cache.c
@@ -1,7 +1,7 @@
/*
* (C) Copyright 2007 Michal Simek
*
- * Michal SIMEK <moonstr@monstr.eu>
+ * Michal SIMEK <monstr@monstr.eu>
*
* See file CREDITS for list of people who contributed to this
* project.
diff --git a/cpu/microblaze/start.S b/cpu/microblaze/start.S
index 3c027ff..8740284 100644
--- a/cpu/microblaze/start.S
+++ b/cpu/microblaze/start.S
@@ -33,15 +33,13 @@
addi r1, r0, CFG_INIT_SP_OFFSET
addi r1, r1, -4 /* Decrement SP to top of memory */
/* add opcode instruction for 32bit jump - 2 instruction imm & brai*/
- addi r6, r0, 0xb000 /* hex b000 opcode imm */
- bslli r6, r6, 16 /* shift */
+ addi r6, r0, 0xb0000000 /* hex b000 opcode imm */
swi r6, r0, 0x0 /* reset address */
swi r6, r0, 0x8 /* user vector exception */
swi r6, r0, 0x10 /* interrupt */
swi r6, r0, 0x20 /* hardware exception */
- addi r6, r0, 0xb808 /* hew b808 opcode brai*/
- bslli r6, r6, 16
+ addi r6, r0, 0xb8080000 /* hew b808 opcode brai*/
swi r6, r0, 0x4 /* reset address */
swi r6, r0, 0xC /* user vector exception */
swi r6, r0, 0x14 /* interrupt */
diff --git a/cpu/microblaze/timer.c b/cpu/microblaze/timer.c
index ab1cb12..b350453 100644
--- a/cpu/microblaze/timer.c
+++ b/cpu/microblaze/timer.c
@@ -33,10 +33,17 @@
timestamp = 0;
}
+#ifdef CFG_TIMER_0
ulong get_timer (ulong base)
{
return (timestamp - base);
}
+#else
+ulong get_timer (ulong base)
+{
+ return (timestamp++ - base);
+}
+#endif
void set_timer (ulong t)
{
diff --git a/drivers/net/Makefile b/drivers/net/Makefile
index 37d69b9..0639859 100644
--- a/drivers/net/Makefile
+++ b/drivers/net/Makefile
@@ -24,8 +24,7 @@
include $(TOPDIR)/config.mk
LIB := $(obj)libnet.a
-
-COBJS := mcffec.o
+COBJS := mcffec.o xilinx_emac.o xilinx_emaclite.o
SRCS := $(COBJS:.o=.c)
OBJS := $(addprefix $(obj),$(COBJS))
diff --git a/drivers/net/xilinx_emac.c b/drivers/net/xilinx_emac.c
new file mode 100644
index 0000000..36e627a
--- /dev/null
+++ b/drivers/net/xilinx_emac.c
@@ -0,0 +1,374 @@
+/*
+ * (C) Copyright 2007 Michal Simek
+ *
+ * Michal SIMEK <monstr@monstr.eu>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ * Based on Xilinx drivers
+ *
+ */
+
+#include <config.h>
+#include <common.h>
+#include <net.h>
+#include <asm/io.h>
+#include "xilinx_emac.h"
+
+#ifdef XILINX_EMAC
+
+#undef DEBUG
+
+#define ENET_MAX_MTU PKTSIZE
+#define ENET_ADDR_LENGTH 6
+
+static unsigned int etherrxbuff[PKTSIZE_ALIGN/4]; /* Receive buffer */
+
+static u8 emacaddr[ENET_ADDR_LENGTH] = { 0x00, 0x0a, 0x35, 0x00, 0x22, 0x01 };
+
+static xemac emac;
+
+void eth_halt(void)
+{
+#ifdef DEBUG
+ puts ("eth_halt\n");
+#endif
+}
+
+int eth_init(bd_t * bis)
+{
+ u32 helpreg;
+#ifdef DEBUG
+ printf("EMAC Initialization Started\n\r");
+#endif
+ if (emac.isstarted) {
+ puts("Emac is started\n");
+ return 0;
+ }
+
+ memset (&emac, 0, sizeof (xemac));
+
+ emac.baseaddress = XILINX_EMAC_BASEADDR;
+
+ /* Setting up FIFOs */
+ emac.recvfifo.regbaseaddress = emac.baseaddress +
+ XEM_PFIFO_RXREG_OFFSET;
+ emac.recvfifo.databaseaddress = emac.baseaddress +
+ XEM_PFIFO_RXDATA_OFFSET;
+ out_be32 (emac.recvfifo.regbaseaddress, XPF_RESET_FIFO_MASK);
+
+ emac.sendfifo.regbaseaddress = emac.baseaddress +
+ XEM_PFIFO_TXREG_OFFSET;
+ emac.sendfifo.databaseaddress = emac.baseaddress +
+ XEM_PFIFO_TXDATA_OFFSET;
+ out_be32 (emac.sendfifo.regbaseaddress, XPF_RESET_FIFO_MASK);
+
+ /* Reset the entire IPIF */
+ out_be32 (emac.baseaddress + XIIF_V123B_RESETR_OFFSET,
+ XIIF_V123B_RESET_MASK);
+
+ /* Stopping EMAC for setting up MAC */
+ helpreg = in_be32 (emac.baseaddress + XEM_ECR_OFFSET);
+ helpreg &= ~(XEM_ECR_XMIT_ENABLE_MASK | XEM_ECR_RECV_ENABLE_MASK);
+ out_be32 (emac.baseaddress + XEM_ECR_OFFSET, helpreg);
+
+ if (!getenv("ethaddr")) {
+ memcpy(bis->bi_enetaddr, emacaddr, ENET_ADDR_LENGTH);
+ }
+
+ /* Set the device station address high and low registers */
+ helpreg = (bis->bi_enetaddr[0] << 8) | bis->bi_enetaddr[1];
+ out_be32 (emac.baseaddress + XEM_SAH_OFFSET, helpreg);
+ helpreg = (bis->bi_enetaddr[2] << 24) | (bis->bi_enetaddr[3] << 16) |
+ (bis->bi_enetaddr[4] << 8) | bis->bi_enetaddr[5];
+ out_be32 (emac.baseaddress + XEM_SAL_OFFSET, helpreg);
+
+
+ helpreg = XEM_ECR_UNICAST_ENABLE_MASK | XEM_ECR_BROAD_ENABLE_MASK |
+ XEM_ECR_FULL_DUPLEX_MASK | XEM_ECR_XMIT_FCS_ENABLE_MASK |
+ XEM_ECR_XMIT_PAD_ENABLE_MASK | XEM_ECR_PHY_ENABLE_MASK;
+ out_be32 (emac.baseaddress + XEM_ECR_OFFSET, helpreg);
+
+ emac.isstarted = 1;
+
+ /* Enable the transmitter, and receiver */
+ helpreg = in_be32 (emac.baseaddress + XEM_ECR_OFFSET);
+ helpreg &= ~(XEM_ECR_XMIT_RESET_MASK | XEM_ECR_RECV_RESET_MASK);
+ helpreg |= (XEM_ECR_XMIT_ENABLE_MASK | XEM_ECR_RECV_ENABLE_MASK);
+ out_be32 (emac.baseaddress + XEM_ECR_OFFSET, helpreg);
+
+ printf("EMAC Initialization complete\n\r");
+ return 0;
+}
+
+int eth_send(volatile void *ptr, int len)
+{
+ u32 intrstatus;
+ u32 xmitstatus;
+ u32 fifocount;
+ u32 wordcount;
+ u32 extrabytecount;
+ u32 *wordbuffer = (u32 *) ptr;
+
+ if (len > ENET_MAX_MTU)
+ len = ENET_MAX_MTU;
+
+ /*
+ * Check for overruns and underruns for the transmit status and length
+ * FIFOs and make sure the send packet FIFO is not deadlocked.
+ * Any of these conditions is bad enough that we do not want to
+ * continue. The upper layer software should reset the device to resolve
+ * the error.
+ */
+ intrstatus = in_be32 ((emac.baseaddress) + XIIF_V123B_IISR_OFFSET);
+ if (intrstatus & (XEM_EIR_XMIT_SFIFO_OVER_MASK |
+ XEM_EIR_XMIT_LFIFO_OVER_MASK)) {
+#ifdef DEBUG
+ puts ("Transmitting overrun error\n");
+#endif
+ return 0;
+ } else if (intrstatus & (XEM_EIR_XMIT_SFIFO_UNDER_MASK |
+ XEM_EIR_XMIT_LFIFO_UNDER_MASK)) {
+#ifdef DEBUG
+ puts ("Transmitting underrun error\n");
+#endif
+ return 0;
+ } else if (in_be32 (emac.sendfifo.regbaseaddress +
+ XPF_COUNT_STATUS_REG_OFFSET) & XPF_DEADLOCK_MASK) {
+#ifdef DEBUG
+ puts("Transmitting fifo error\n");
+#endif
+ return 0;
+ }
+
+ /*
+ * Before writing to the data FIFO, make sure the length FIFO is not
+ * full. The data FIFO might not be full yet even though the length FIFO
+ * is. This avoids an overrun condition on the length FIFO and keeps the
+ * FIFOs in sync.
+ *
+ * Clear the latched LFIFO_FULL bit so next time around the most
+ * current status is represented
+ */
+ if (intrstatus & XEM_EIR_XMIT_LFIFO_FULL_MASK) {
+ out_be32 ((emac.baseaddress) + XIIF_V123B_IISR_OFFSET,
+ intrstatus & XEM_EIR_XMIT_LFIFO_FULL_MASK);
+#ifdef DEBUG
+ puts ("Fifo is full\n");
+#endif
+ return 0;
+ }
+
+ /* get the count of how many words may be inserted into the FIFO */
+ fifocount = in_be32 (emac.sendfifo.regbaseaddress +
+ XPF_COUNT_STATUS_REG_OFFSET) & XPF_COUNT_MASK;
+ wordcount = len >> 2;
+ extrabytecount = len & 0x3;
+
+ if (fifocount < wordcount) {
+#ifdef DEBUG
+ puts ("Sending packet is larger then size of FIFO\n");
+#endif
+ return 0;
+ }
+
+ for (fifocount = 0; fifocount < wordcount; fifocount++) {
+ out_be32 (emac.sendfifo.databaseaddress, wordbuffer[fifocount]);
+ }
+ if (extrabytecount > 0) {
+ u32 lastword = 0;
+ u8 *extrabytesbuffer = (u8 *) (wordbuffer + wordcount);
+
+ if (extrabytecount == 1) {
+ lastword = extrabytesbuffer[0] << 24;
+ } else if (extrabytecount == 2) {
+ lastword = extrabytesbuffer[0] << 24 |
+ extrabytesbuffer[1] << 16;
+ } else if (extrabytecount == 3) {
+ lastword = extrabytesbuffer[0] << 24 |
+ extrabytesbuffer[1] << 16 |
+ extrabytesbuffer[2] << 8;
+ }
+ out_be32 (emac.sendfifo.databaseaddress, lastword);
+ }
+
+ /* Loop on the MAC's status to wait for any pause to complete */
+ intrstatus = in_be32 ((emac.baseaddress) + XIIF_V123B_IISR_OFFSET);
+ while ((intrstatus & XEM_EIR_XMIT_PAUSE_MASK) != 0) {
+ intrstatus = in_be32 ((emac.baseaddress) +
+ XIIF_V123B_IISR_OFFSET);
+ /* Clear the pause status from the transmit status register */
+ out_be32 ((emac.baseaddress) + XIIF_V123B_IISR_OFFSET,
+ intrstatus & XEM_EIR_XMIT_PAUSE_MASK);
+ }
+
+ /*
+ * Set the MAC's transmit packet length register to tell it to transmit
+ */
+ out_be32 (emac.baseaddress + XEM_TPLR_OFFSET, len);
+
+ /*
+ * Loop on the MAC's status to wait for the transmit to complete.
+ * The transmit status is in the FIFO when the XMIT_DONE bit is set.
+ */
+ do {
+ intrstatus = in_be32 ((emac.baseaddress) +
+ XIIF_V123B_IISR_OFFSET);
+ }
+ while ((intrstatus & XEM_EIR_XMIT_DONE_MASK) == 0);
+
+ xmitstatus = in_be32 (emac.baseaddress + XEM_TSR_OFFSET);
+
+ if (intrstatus & (XEM_EIR_XMIT_SFIFO_OVER_MASK |
+ XEM_EIR_XMIT_LFIFO_OVER_MASK)) {
+#ifdef DEBUG
+ puts ("Transmitting overrun error\n");
+#endif
+ return 0;
+ } else if (intrstatus & (XEM_EIR_XMIT_SFIFO_UNDER_MASK |
+ XEM_EIR_XMIT_LFIFO_UNDER_MASK)) {
+#ifdef DEBUG
+ puts ("Transmitting underrun error\n");
+#endif
+ return 0;
+ }
+
+ /* Clear the interrupt status register of transmit statuses */
+ out_be32 ((emac.baseaddress) + XIIF_V123B_IISR_OFFSET,
+ intrstatus & XEM_EIR_XMIT_ALL_MASK);
+
+ /*
+ * Collision errors are stored in the transmit status register
+ * instead of the interrupt status register
+ */
+ if ((xmitstatus & XEM_TSR_EXCESS_DEFERRAL_MASK) ||
+ (xmitstatus & XEM_TSR_LATE_COLLISION_MASK)) {
+#ifdef DEBUG
+ puts ("Transmitting collision error\n");
+#endif
+ return 0;
+ }
+ return 1;
+}
+
+int eth_rx(void)
+{
+ u32 pktlength;
+ u32 intrstatus;
+ u32 fifocount;
+ u32 wordcount;
+ u32 extrabytecount;
+ u32 lastword;
+ u8 *extrabytesbuffer;
+
+ if (in_be32 (emac.recvfifo.regbaseaddress + XPF_COUNT_STATUS_REG_OFFSET)
+ & XPF_DEADLOCK_MASK) {
+ out_be32 (emac.recvfifo.regbaseaddress, XPF_RESET_FIFO_MASK);
+#ifdef DEBUG
+ puts ("Receiving FIFO deadlock\n");
+#endif
+ return 0;
+ }
+
+ /*
+ * Get the interrupt status to know what happened (whether an error
+ * occurred and/or whether frames have been received successfully).
+ * When clearing the intr status register, clear only statuses that
+ * pertain to receive.
+ */
+ intrstatus = in_be32 ((emac.baseaddress) + XIIF_V123B_IISR_OFFSET);
+ /*
+ * Before reading from the length FIFO, make sure the length FIFO is not
+ * empty. We could cause an underrun error if we try to read from an
+ * empty FIFO.
+ */
+ if (!(intrstatus & XEM_EIR_RECV_DONE_MASK)) {
+#ifdef DEBUG
+ /* puts("Receiving FIFO is empty\n"); */
+#endif
+ return 0;
+ }
+
+ /*
+ * Determine, from the MAC, the length of the next packet available
+ * in the data FIFO (there should be a non-zero length here)
+ */
+ pktlength = in_be32 (emac.baseaddress + XEM_RPLR_OFFSET);
+ if (!pktlength) {
+ return 0;
+ }
+
+ /*
+ * Write the RECV_DONE bit in the status register to clear it. This bit
+ * indicates the RPLR is non-empty, and we know it's set at this point.
+ * We clear it so that subsequent entry into this routine will reflect
+ * the current status. This is done because the non-empty bit is latched
+ * in the IPIF, which means it may indicate a non-empty condition even
+ * though there is something in the FIFO.
+ */
+ out_be32 ((emac.baseaddress) + XIIF_V123B_IISR_OFFSET,
+ XEM_EIR_RECV_DONE_MASK);
+
+ fifocount = in_be32 (emac.recvfifo.regbaseaddress +
+ XPF_COUNT_STATUS_REG_OFFSET) & XPF_COUNT_MASK;
+
+ if ((fifocount * 4) < pktlength) {
+#ifdef DEBUG
+ puts ("Receiving FIFO is smaller than packet size.\n");
+#endif
+ return 0;
+ }
+
+ wordcount = pktlength >> 2;
+ extrabytecount = pktlength & 0x3;
+
+ for (fifocount = 0; fifocount < wordcount; fifocount++) {
+ etherrxbuff[fifocount] =
+ in_be32 (emac.recvfifo.databaseaddress);
+ }
+
+ /*
+ * if there are extra bytes to handle, read the last word from the FIFO
+ * and insert the extra bytes into the buffer
+ */
+ if (extrabytecount > 0) {
+ extrabytesbuffer = (u8 *) (etherrxbuff + wordcount);
+
+ lastword = in_be32 (emac.recvfifo.databaseaddress);
+
+ /*
+ * one extra byte in the last word, put the byte into the next
+ * location of the buffer, bytes in a word of the FIFO are
+ * ordered from most significant byte to least
+ */
+ if (extrabytecount == 1) {
+ extrabytesbuffer[0] = (u8) (lastword >> 24);
+ } else if (extrabytecount == 2) {
+ extrabytesbuffer[0] = (u8) (lastword >> 24);
+ extrabytesbuffer[1] = (u8) (lastword >> 16);
+ } else if (extrabytecount == 3) {
+ extrabytesbuffer[0] = (u8) (lastword >> 24);
+ extrabytesbuffer[1] = (u8) (lastword >> 16);
+ extrabytesbuffer[2] = (u8) (lastword >> 8);
+ }
+ }
+ NetReceive((uchar *)etherrxbuff, pktlength);
+ return 1;
+}
+#endif
diff --git a/drivers/net/xilinx_emac.h b/drivers/net/xilinx_emac.h
new file mode 100644
index 0000000..966598e
--- /dev/null
+++ b/drivers/net/xilinx_emac.h
@@ -0,0 +1,148 @@
+/*
+ * (C) Copyright 2007 Michal Simek
+ *
+ * Michal SIMEK <monstr@monstr.eu>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ * Based on Xilinx drivers
+ *
+ */
+
+typedef struct {
+ u32 regbaseaddress; /* Base address of registers */
+ u32 databaseaddress; /* Base address of data for FIFOs */
+} xpacketfifov100b;
+
+typedef struct {
+ u32 baseaddress; /* Base address (of IPIF) */
+ u32 isstarted; /* Device is currently started 0-no, 1-yes */
+ xpacketfifov100b recvfifo; /* FIFO used to receive frames */
+ xpacketfifov100b sendfifo; /* FIFO used to send frames */
+} xemac;
+
+#define XIIF_V123B_IISR_OFFSET 32UL /* IP interrupt status register */
+#define XIIF_V123B_RESET_MASK 0xAUL
+#define XIIF_V123B_RESETR_OFFSET 64UL /* reset register */
+
+/* This constant is used with the Reset Register */
+#define XPF_RESET_FIFO_MASK 0x0000000A
+#define XPF_COUNT_STATUS_REG_OFFSET 4UL
+
+/* These constants are used with the Occupancy/Vacancy Count Register. This
+ * register also contains FIFO status */
+#define XPF_COUNT_MASK 0x0000FFFF
+#define XPF_DEADLOCK_MASK 0x20000000
+
+/* Offset of the MAC registers from the IPIF base address */
+#define XEM_REG_OFFSET 0x1100UL
+
+/*
+ * Register offsets for the Ethernet MAC. Each register is 32 bits.
+ */
+#define XEM_ECR_OFFSET (XEM_REG_OFFSET + 0x4) /* MAC Control */
+#define XEM_SAH_OFFSET (XEM_REG_OFFSET + 0xC) /* Station addr, high */
+#define XEM_SAL_OFFSET (XEM_REG_OFFSET + 0x10) /* Station addr, low */
+#define XEM_RPLR_OFFSET (XEM_REG_OFFSET + 0x1C) /* Rx packet length */
+#define XEM_TPLR_OFFSET (XEM_REG_OFFSET + 0x20) /* Tx packet length */
+#define XEM_TSR_OFFSET (XEM_REG_OFFSET + 0x24) /* Tx status */
+
+
+
+#define XEM_PFIFO_OFFSET 0x2000UL
+/* Tx registers */
+#define XEM_PFIFO_TXREG_OFFSET (XEM_PFIFO_OFFSET + 0x0)
+/* Rx registers */
+#define XEM_PFIFO_RXREG_OFFSET (XEM_PFIFO_OFFSET + 0x10)
+/* Tx keyhole */
+#define XEM_PFIFO_TXDATA_OFFSET (XEM_PFIFO_OFFSET + 0x100)
+/* Rx keyhole */
+#define XEM_PFIFO_RXDATA_OFFSET (XEM_PFIFO_OFFSET + 0x200)
+
+
+/*
+ * EMAC Interrupt Registers (Status and Enable) masks. These registers are
+ * part of the IPIF IP Interrupt registers
+ */
+/* A mask for all transmit interrupts, used in polled mode */
+#define XEM_EIR_XMIT_ALL_MASK (XEM_EIR_XMIT_DONE_MASK |\
+ XEM_EIR_XMIT_ERROR_MASK | \
+ XEM_EIR_XMIT_SFIFO_EMPTY_MASK |\
+ XEM_EIR_XMIT_LFIFO_FULL_MASK)
+
+/* Xmit complete */
+#define XEM_EIR_XMIT_DONE_MASK 0x00000001UL
+/* Recv complete */
+#define XEM_EIR_RECV_DONE_MASK 0x00000002UL
+/* Xmit error */
+#define XEM_EIR_XMIT_ERROR_MASK 0x00000004UL
+/* Recv error */
+#define XEM_EIR_RECV_ERROR_MASK 0x00000008UL
+/* Xmit status fifo empty */
+#define XEM_EIR_XMIT_SFIFO_EMPTY_MASK 0x00000010UL
+/* Recv length fifo empty */
+#define XEM_EIR_RECV_LFIFO_EMPTY_MASK 0x00000020UL
+/* Xmit length fifo full */
+#define XEM_EIR_XMIT_LFIFO_FULL_MASK 0x00000040UL
+/* Recv length fifo overrun */
+#define XEM_EIR_RECV_LFIFO_OVER_MASK 0x00000080UL
+/* Recv length fifo underrun */
+#define XEM_EIR_RECV_LFIFO_UNDER_MASK 0x00000100UL
+/* Xmit status fifo overrun */
+#define XEM_EIR_XMIT_SFIFO_OVER_MASK 0x00000200UL
+/* Transmit status fifo underrun */
+#define XEM_EIR_XMIT_SFIFO_UNDER_MASK 0x00000400UL
+/* Transmit length fifo overrun */
+#define XEM_EIR_XMIT_LFIFO_OVER_MASK 0x00000800UL
+/* Transmit length fifo underrun */
+#define XEM_EIR_XMIT_LFIFO_UNDER_MASK 0x00001000UL
+/* Transmit pause pkt received */
+#define XEM_EIR_XMIT_PAUSE_MASK 0x00002000UL
+
+/*
+ * EMAC Control Register (ECR)
+ */
+/* Full duplex mode */
+#define XEM_ECR_FULL_DUPLEX_MASK 0x80000000UL
+/* Reset transmitter */
+#define XEM_ECR_XMIT_RESET_MASK 0x40000000UL
+/* Enable transmitter */
+#define XEM_ECR_XMIT_ENABLE_MASK 0x20000000UL
+/* Reset receiver */
+#define XEM_ECR_RECV_RESET_MASK 0x10000000UL
+/* Enable receiver */
+#define XEM_ECR_RECV_ENABLE_MASK 0x08000000UL
+/* Enable PHY */
+#define XEM_ECR_PHY_ENABLE_MASK 0x04000000UL
+/* Enable xmit pad insert */
+#define XEM_ECR_XMIT_PAD_ENABLE_MASK 0x02000000UL
+/* Enable xmit FCS insert */
+#define XEM_ECR_XMIT_FCS_ENABLE_MASK 0x01000000UL
+/* Enable unicast addr */
+#define XEM_ECR_UNICAST_ENABLE_MASK 0x00020000UL
+/* Enable broadcast addr */
+#define XEM_ECR_BROAD_ENABLE_MASK 0x00008000UL
+
+/*
+ * Transmit Status Register (TSR)
+ */
+/* Transmit excess deferral */
+#define XEM_TSR_EXCESS_DEFERRAL_MASK 0x80000000UL
+/* Transmit late collision */
+#define XEM_TSR_LATE_COLLISION_MASK 0x01000000UL
diff --git a/drivers/net/xilinx_emaclite.c b/drivers/net/xilinx_emaclite.c
new file mode 100644
index 0000000..5d8eaa5
--- /dev/null
+++ b/drivers/net/xilinx_emaclite.c
@@ -0,0 +1,376 @@
+/*
+ * (C) Copyright 2007 Michal Simek
+ *
+ * Michal SIMEK <monstr@monstr.eu>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <net.h>
+#include <config.h>
+#include <asm/io.h>
+
+#ifdef XILINX_EMACLITE_BASEADDR
+
+#undef DEBUG
+
+#define ENET_MAX_MTU PKTSIZE
+#define ENET_MAX_MTU_ALIGNED PKTSIZE_ALIGN
+#define ENET_ADDR_LENGTH 6
+
+/* EmacLite constants */
+#define XEL_BUFFER_OFFSET 0x0800 /* Next buffer's offset */
+#define XEL_TPLR_OFFSET 0x07F4 /* Tx packet length */
+#define XEL_TSR_OFFSET 0x07FC /* Tx status */
+#define XEL_RSR_OFFSET 0x17FC /* Rx status */
+#define XEL_RXBUFF_OFFSET 0x1000 /* Receive Buffer */
+
+/* Xmit complete */
+#define XEL_TSR_XMIT_BUSY_MASK 0x00000001UL
+/* Xmit interrupt enable bit */
+#define XEL_TSR_XMIT_IE_MASK 0x00000008UL
+/* Buffer is active, SW bit only */
+#define XEL_TSR_XMIT_ACTIVE_MASK 0x80000000UL
+/* Program the MAC address */
+#define XEL_TSR_PROGRAM_MASK 0x00000002UL
+/* define for programming the MAC address into the EMAC Lite */
+#define XEL_TSR_PROG_MAC_ADDR (XEL_TSR_XMIT_BUSY_MASK | XEL_TSR_PROGRAM_MASK)
+
+/* Transmit packet length upper byte */
+#define XEL_TPLR_LENGTH_MASK_HI 0x0000FF00UL
+/* Transmit packet length lower byte */
+#define XEL_TPLR_LENGTH_MASK_LO 0x000000FFUL
+
+/* Recv complete */
+#define XEL_RSR_RECV_DONE_MASK 0x00000001UL
+/* Recv interrupt enable bit */
+#define XEL_RSR_RECV_IE_MASK 0x00000008UL
+
+typedef struct {
+ unsigned int baseaddress; /* Base address for device (IPIF) */
+ unsigned int nexttxbuffertouse; /* Next TX buffer to write to */
+ unsigned int nextrxbuffertouse; /* Next RX buffer to read from */
+ unsigned char deviceid; /* Unique ID of device - for future */
+} xemaclite;
+
+static xemaclite emaclite;
+
+static char etherrxbuff[PKTSIZE_ALIGN/4]; /* Receive buffer */
+
+/* hardcoded MAC address for the Xilinx EMAC Core when env is nowhere*/
+#ifdef CFG_ENV_IS_NOWHERE
+static u8 emacaddr[ENET_ADDR_LENGTH] = { 0x00, 0x0a, 0x35, 0x00, 0x22, 0x01 };
+#endif
+
+void xemaclite_alignedread (u32 * srcptr, void *destptr, unsigned bytecount)
+{
+ unsigned int i;
+ u32 alignbuffer;
+ u32 *to32ptr;
+ u32 *from32ptr;
+ u8 *to8ptr;
+ u8 *from8ptr;
+
+ from32ptr = (u32 *) srcptr;
+
+ /* Word aligned buffer, no correction needed. */
+ to32ptr = (u32 *) destptr;
+ while (bytecount > 3) {
+ *to32ptr++ = *from32ptr++;
+ bytecount -= 4;
+ }
+ to8ptr = (u8 *) to32ptr;
+
+ alignbuffer = *from32ptr++;
+ from8ptr = (u8 *) & alignbuffer;
+
+ for (i = 0; i < bytecount; i++) {
+ *to8ptr++ = *from8ptr++;
+ }
+}
+
+void xemaclite_alignedwrite (void *srcptr, u32 destptr, unsigned bytecount)
+{
+ unsigned i;
+ u32 alignbuffer;
+ u32 *to32ptr = (u32 *) destptr;
+ u32 *from32ptr;
+ u8 *to8ptr;
+ u8 *from8ptr;
+
+ from32ptr = (u32 *) srcptr;
+ while (bytecount > 3) {
+
+ *to32ptr++ = *from32ptr++;
+ bytecount -= 4;
+ }
+
+ alignbuffer = 0;
+ to8ptr = (u8 *) & alignbuffer;
+ from8ptr = (u8 *) from32ptr;
+
+ for (i = 0; i < bytecount; i++) {
+ *to8ptr++ = *from8ptr++;
+ }
+
+ *to32ptr++ = alignbuffer;
+}
+
+void eth_halt (void)
+{
+#ifdef DEBUG
+ puts ("eth_halt\n");
+#endif
+}
+
+int eth_init (bd_t * bis)
+{
+#ifdef DEBUG
+ puts ("EmacLite Initialization Started\n");
+#endif
+ memset (&emaclite, 0, sizeof (xemaclite));
+ emaclite.baseaddress = XILINX_EMACLITE_BASEADDR;
+
+ if (!getenv("ethaddr")) {
+ memcpy(bis->bi_enetaddr, emacaddr, ENET_ADDR_LENGTH);
+ }
+
+/*
+ * TX - TX_PING & TX_PONG initialization
+ */
+ /* Restart PING TX */
+ out_be32 (emaclite.baseaddress + XEL_TSR_OFFSET, 0);
+ /* Copy MAC address */
+ xemaclite_alignedwrite (bis->bi_enetaddr,
+ emaclite.baseaddress, ENET_ADDR_LENGTH);
+ /* Set the length */
+ out_be32 (emaclite.baseaddress + XEL_TPLR_OFFSET, ENET_ADDR_LENGTH);
+ /* Update the MAC address in the EMAC Lite */
+ out_be32 (emaclite.baseaddress + XEL_TSR_OFFSET, XEL_TSR_PROG_MAC_ADDR);
+ /* Wait for EMAC Lite to finish with the MAC address update */
+ while ((in_be32 (emaclite.baseaddress + XEL_TSR_OFFSET) &
+ XEL_TSR_PROG_MAC_ADDR) != 0) ;
+
+#ifdef XILINX_EMACLITE_TX_PING_PONG
+ /* The same operation with PONG TX */
+ out_be32 (emaclite.baseaddress + XEL_TSR_OFFSET + XEL_BUFFER_OFFSET, 0);
+ xemaclite_alignedwrite (bis->bi_enetaddr, emaclite.baseaddress +
+ XEL_BUFFER_OFFSET, ENET_ADDR_LENGTH);
+ out_be32 (emaclite.baseaddress + XEL_TPLR_OFFSET, ENET_ADDR_LENGTH);
+ out_be32 (emaclite.baseaddress + XEL_TSR_OFFSET + XEL_BUFFER_OFFSET,
+ XEL_TSR_PROG_MAC_ADDR);
+ while ((in_be32 (emaclite.baseaddress + XEL_TSR_OFFSET +
+ XEL_BUFFER_OFFSET) & XEL_TSR_PROG_MAC_ADDR) != 0) ;
+#endif
+
+/*
+ * RX - RX_PING & RX_PONG initialization
+ */
+ /* Write out the value to flush the RX buffer */
+ out_be32 (emaclite.baseaddress + XEL_RSR_OFFSET, XEL_RSR_RECV_IE_MASK);
+#ifdef XILINX_EMACLITE_RX_PING_PONG
+ out_be32 (emaclite.baseaddress + XEL_RSR_OFFSET + XEL_BUFFER_OFFSET,
+ XEL_RSR_RECV_IE_MASK);
+#endif
+
+#ifdef DEBUG
+ puts ("EmacLite Initialization complete\n");
+#endif
+ return 0;
+}
+
+int xemaclite_txbufferavailable (xemaclite * instanceptr)
+{
+ u32 reg;
+ u32 txpingbusy;
+ u32 txpongbusy;
+ /*
+ * Read the other buffer register
+ * and determine if the other buffer is available
+ */
+ reg = in_be32 (instanceptr->baseaddress +
+ instanceptr->nexttxbuffertouse + 0);
+ txpingbusy = ((reg & XEL_TSR_XMIT_BUSY_MASK) ==
+ XEL_TSR_XMIT_BUSY_MASK);
+
+ reg = in_be32 (instanceptr->baseaddress +
+ (instanceptr->nexttxbuffertouse ^ XEL_TSR_OFFSET) + 0);
+ txpongbusy = ((reg & XEL_TSR_XMIT_BUSY_MASK) ==
+ XEL_TSR_XMIT_BUSY_MASK);
+
+ return (!(txpingbusy && txpongbusy));
+}
+
+int eth_send (volatile void *ptr, int len) {
+
+ unsigned int reg;
+ unsigned int baseaddress;
+
+ unsigned maxtry = 1000;
+
+ if (len > ENET_MAX_MTU)
+ len = ENET_MAX_MTU;
+
+ while (!xemaclite_txbufferavailable (&emaclite) && maxtry) {
+ udelay (10);
+ maxtry--;
+ }
+
+ if (!maxtry) {
+ printf ("Error: Timeout waiting for ethernet TX buffer\n");
+ /* Restart PING TX */
+ out_be32 (emaclite.baseaddress + XEL_TSR_OFFSET, 0);
+#ifdef XILINX_EMACLITE_TX_PING_PONG
+ out_be32 (emaclite.baseaddress + XEL_TSR_OFFSET +
+ XEL_BUFFER_OFFSET, 0);
+#endif
+ return 0;
+ }
+
+ /* Determine the expected TX buffer address */
+ baseaddress = (emaclite.baseaddress + emaclite.nexttxbuffertouse);
+
+ /* Determine if the expected buffer address is empty */
+ reg = in_be32 (baseaddress + XEL_TSR_OFFSET);
+ if (((reg & XEL_TSR_XMIT_BUSY_MASK) == 0)
+ && ((in_be32 ((baseaddress) + XEL_TSR_OFFSET)
+ & XEL_TSR_XMIT_ACTIVE_MASK) == 0)) {
+
+#ifdef XILINX_EMACLITE_TX_PING_PONG
+ emaclite.nexttxbuffertouse ^= XEL_BUFFER_OFFSET;
+#endif
+#ifdef DEBUG
+ printf ("Send packet from 0x%x\n", baseaddress);
+#endif
+ /* Write the frame to the buffer */
+ xemaclite_alignedwrite ((void *) ptr, baseaddress, len);
+ out_be32 (baseaddress + XEL_TPLR_OFFSET,(len &
+ (XEL_TPLR_LENGTH_MASK_HI | XEL_TPLR_LENGTH_MASK_LO)));
+ reg = in_be32 (baseaddress + XEL_TSR_OFFSET);
+ reg |= XEL_TSR_XMIT_BUSY_MASK;
+ if ((reg & XEL_TSR_XMIT_IE_MASK) != 0) {
+ reg |= XEL_TSR_XMIT_ACTIVE_MASK;
+ }
+ out_be32 (baseaddress + XEL_TSR_OFFSET, reg);
+ return 1;
+ }
+#ifdef XILINX_EMACLITE_TX_PING_PONG
+ /* Switch to second buffer */
+ baseaddress ^= XEL_BUFFER_OFFSET;
+ /* Determine if the expected buffer address is empty */
+ reg = in_be32 (baseaddress + XEL_TSR_OFFSET);
+ if (((reg & XEL_TSR_XMIT_BUSY_MASK) == 0)
+ && ((in_be32 ((baseaddress) + XEL_TSR_OFFSET)
+ & XEL_TSR_XMIT_ACTIVE_MASK) == 0)) {
+#ifdef DEBUG
+ printf ("Send packet from 0x%x\n", baseaddress);
+#endif
+ /* Write the frame to the buffer */
+ xemaclite_alignedwrite ((void *) ptr, baseaddress, len);
+ out_be32 (baseaddress + XEL_TPLR_OFFSET,(len &
+ (XEL_TPLR_LENGTH_MASK_HI | XEL_TPLR_LENGTH_MASK_LO)));
+ reg = in_be32 (baseaddress + XEL_TSR_OFFSET);
+ reg |= XEL_TSR_XMIT_BUSY_MASK;
+ if ((reg & XEL_TSR_XMIT_IE_MASK) != 0) {
+ reg |= XEL_TSR_XMIT_ACTIVE_MASK;
+ }
+ out_be32 (baseaddress + XEL_TSR_OFFSET, reg);
+ return 1;
+ }
+#endif
+ puts ("Error while sending frame\n");
+ return 0;
+}
+
+int eth_rx (void)
+{
+ unsigned int length;
+ unsigned int reg;
+ unsigned int baseaddress;
+
+ baseaddress = emaclite.baseaddress + emaclite.nextrxbuffertouse;
+ reg = in_be32 (baseaddress + XEL_RSR_OFFSET);
+#ifdef DEBUG
+ printf ("Testing data at address 0x%x\n", baseaddress);
+#endif
+ if ((reg & XEL_RSR_RECV_DONE_MASK) == XEL_RSR_RECV_DONE_MASK) {
+#ifdef XILINX_EMACLITE_RX_PING_PONG
+ emaclite.nextrxbuffertouse ^= XEL_BUFFER_OFFSET;
+#endif
+ } else {
+#ifndef XILINX_EMACLITE_RX_PING_PONG
+#ifdef DEBUG
+ printf ("No data was available - address 0x%x\n", baseaddress);
+#endif
+ return 0;
+#else
+ baseaddress ^= XEL_BUFFER_OFFSET;
+ reg = in_be32 (baseaddress + XEL_RSR_OFFSET);
+ if ((reg & XEL_RSR_RECV_DONE_MASK) !=
+ XEL_RSR_RECV_DONE_MASK) {
+#ifdef DEBUG
+ printf ("No data was available - address 0x%x\n",
+ baseaddress);
+#endif
+ return 0;
+ }
+#endif
+ }
+ /* Get the length of the frame that arrived */
+ switch(((in_be32 (baseaddress + XEL_RXBUFF_OFFSET + 0xC)) &
+ 0xFFFF0000 ) >> 16) {
+ case 0x806:
+ length = 42 + 20; /* FIXME size of ARP */
+#ifdef DEBUG
+ puts ("ARP Packet\n");
+#endif
+ break;
+ case 0x800:
+ length = 14 + 14 +
+ (((in_be32 (baseaddress + XEL_RXBUFF_OFFSET + 0x10)) &
+ 0xFFFF0000) >> 16); /* FIXME size of IP packet */
+#ifdef DEBUG
+ puts("IP Packet\n");
+#endif
+ break;
+ default:
+#ifdef DEBUG
+ puts("Other Packet\n");
+#endif
+ length = ENET_MAX_MTU;
+ break;
+ }
+
+ xemaclite_alignedread ((u32 *) (baseaddress + XEL_RXBUFF_OFFSET),
+ etherrxbuff, length);
+
+ /* Acknowledge the frame */
+ reg = in_be32 (baseaddress + XEL_RSR_OFFSET);
+ reg &= ~XEL_RSR_RECV_DONE_MASK;
+ out_be32 (baseaddress + XEL_RSR_OFFSET, reg);
+
+#ifdef DEBUG
+ printf ("Packet receive from 0x%x, length %dB\n", baseaddress, length);
+#endif
+ NetReceive ((uchar *) etherrxbuff, length);
+ return 1;
+
+}
+#endif
diff --git a/drivers/serial_xuartlite.c b/drivers/serial_xuartlite.c
index ed59abe..1f3aaae 100644
--- a/drivers/serial_xuartlite.c
+++ b/drivers/serial_xuartlite.c
@@ -24,7 +24,7 @@
#include <config.h>
-#ifdef CONFIG_MICROBLAZE
+#ifdef XILINX_UARTLITE
#include <asm/serial_xuartlite.h>
diff --git a/fs/Makefile b/fs/Makefile
index 273d90e..118ae78 100644
--- a/fs/Makefile
+++ b/fs/Makefile
@@ -22,7 +22,7 @@
#
#
-SUBDIRS := jffs2 cramfs fdos fat reiserfs ext2
+SUBDIRS := romfs jffs2 cramfs fdos fat reiserfs ext2
$(obj).depend all:
@for dir in $(SUBDIRS) ; do \
diff --git a/fs/romfs/Makefile b/fs/romfs/Makefile
new file mode 100644
index 0000000..937d755
--- /dev/null
+++ b/fs/romfs/Makefile
@@ -0,0 +1,49 @@
+#
+# (C) Copyright 2000-2006
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB = $(obj)libromfs.a
+
+AOBJS =
+COBJS = romfs.o
+
+SRCS := $(AOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(AOBJS) $(COBJS))
+
+#CPPFLAGS +=
+
+all: $(LIB) $(AOBJS)
+
+$(LIB): $(obj).depend $(OBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS)
+
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
diff --git a/fs/romfs/romfs.c b/fs/romfs/romfs.c
new file mode 100644
index 0000000..15de3e1
--- /dev/null
+++ b/fs/romfs/romfs.c
@@ -0,0 +1,240 @@
+/*
+ * (C) Copyright 2007 Michal Simek
+ *
+ * Michal SIMEK <monstr@monstr.eu>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <malloc.h>
+#include <command.h>
+
+#if defined(CONFIG_CMD_JFFS2)
+
+#include <asm/byteorder.h>
+#include <linux/stat.h>
+#include <jffs2/jffs2.h>
+#include <jffs2/load_kernel.h>
+
+#undef DEBUG_ROMFS
+
+/* ROMFS superblock */
+struct romfs_super {
+ u32 word0;
+ u32 word1;
+ u32 size;
+ u32 checksum;
+ char name[0];
+};
+
+struct romfs_inode {
+ u32 next;
+ u32 spec;
+ u32 size;
+ u32 checksum;
+ char name[0];
+};
+
+extern flash_info_t flash_info[];
+#define PART_OFFSET(x) (x->offset + flash_info[x->dev->id->num].start[0])
+#define ALIGN(x) (((x) & 0xfffffff0))
+#define HEADERSIZE(name) (0x20 + ALIGN(strlen(name)))
+
+static unsigned long romfs_resolve (unsigned long begin, unsigned long offset,
+ unsigned long size, int raw, char *filename)
+{
+ unsigned long inodeoffset = 0, nextoffset;
+ struct romfs_inode *inode;
+#ifdef DEBUG_ROMFS
+ printf ("ROMFS_resolve: begin 0x%x, offset 0x%x, size 0x%x, raw 0x%x, \
+ filename %s\n", begin, offset, size, raw, filename);
+#endif
+
+ while (inodeoffset < size) {
+ inode = (struct romfs_inode *)(begin + offset + inodeoffset);
+ offset = 0;
+ nextoffset = ALIGN (inode->next);
+#ifdef DEBUG_ROMFS
+ printf("inode 0x%x, name %s - len 0x%x, next inode 0x%x, \
+ compare names 0x%x\n",
+ inode, inode->name, strlen (inode->name), nextoffset,
+ strncmp (filename, inode->name, strlen (filename)));
+#endif
+ if (!strncmp (filename, inode->name, strlen (inode->name))) {
+ char *p = strtok (NULL, "/");
+ if (raw && (p == NULL || *p == '\0')) {
+ return offset + inodeoffset;
+ }
+ return romfs_resolve (begin,
+ inodeoffset + HEADERSIZE (inode->name),
+ size, raw, p);
+ }
+ inodeoffset = nextoffset;
+ }
+
+ printf ("can't find corresponding entry\n");
+ return 0;
+}
+
+int romfs_load (char *loadoffset, struct part_info *info, char *filename)
+{
+ struct romfs_inode *inode;
+ struct romfs_super *sb;
+ char *data;
+ int pocet;
+ sb = (struct romfs_super *) PART_OFFSET (info);
+
+ unsigned long offset;
+
+ offset = romfs_resolve (PART_OFFSET (info), HEADERSIZE (sb->name),
+ sb->size, 1, strtok (filename, "/"));
+ if (offset <= 0)
+ return offset;
+
+ inode = (struct romfs_inode *)(PART_OFFSET (info) + offset);
+ data = (char *)((int)inode + HEADERSIZE (inode->name));
+ pocet = inode->size;
+ while (pocet--) {
+ *loadoffset++ = *data++;
+ }
+ return inode->size;
+}
+
+static int romfs_list_inode (struct part_info *info, unsigned long offset)
+{
+ struct romfs_inode *inode =
+ (struct romfs_inode *)(PART_OFFSET (info) + offset);
+ struct romfs_inode *hardlink = NULL;
+ char str[3], *data;
+
+/*
+ * mapping spec.info means
+ * 0 hard link link destination [file header]
+ * 1 directory first file's header
+ * 2 regular file unused, must be zero [MBZ]
+ * 3 symbolic link unused, MBZ (file data is the link content)
+ * 4 block device 16/16 bits major/minor number
+ * 5 char device - " -
+ * 6 socket unused, MBZ
+ * 7 fifo unused, MBZ
+ */
+ char attributes[] = "hdflbcsp";
+ str[0] = attributes[inode->next & 0x7];
+ str[1] = (inode->next & 0x8) ? 'x' : '-';
+ str[2] = '\0';
+
+ if ((str[0] == 'b') || (str[0] == 'c')) {
+#ifdef DEBUG_ROMFS
+ printf (" %s %3d,%3d %12s 0x%08x 0x%08x", str,
+ (inode->spec & 0xffff0000) >> 16,
+ inode->spec & 0x0000ffff, inode->name, inode,
+ inode->spec);
+#else
+ printf (" %s %3d,%3d %12s", str,
+ (inode->spec & 0xffff0000) >> 16,
+ inode->spec & 0x0000ffff);
+#endif
+ } else {
+#ifdef DEBUG_ROMFS
+ printf (" %s %7d %12s 0x%08x 0x%08x", str, inode->size,
+ inode->name, inode, inode->spec);
+#else
+ printf (" %s %7d %12s", str, inode->size, inode->name);
+#endif
+ if (str[0] == 'l') {
+ data = (char *)((int)inode + HEADERSIZE (inode->name));
+ puts (" -> ");
+ puts (data);
+ }
+ if (str[0] == 'h') {
+ hardlink = (struct romfs_inode *)(PART_OFFSET (info) +
+ inode->spec);
+ puts (" -> ");
+ puts (hardlink->name);
+ }
+ }
+ puts ("\n");
+ return ALIGN (inode->next);
+}
+
+int romfs_ls (struct part_info *info, char *filename)
+{
+ struct romfs_inode *inode;
+ unsigned long inodeoffset = 0, nextoffset;
+ unsigned long offset, size;
+ struct romfs_super *sb;
+ sb = (struct romfs_super *)PART_OFFSET (info);
+
+ if (strlen (filename) == 0 || !strcmp (filename, "/")) {
+ offset = HEADERSIZE (sb->name);
+ size = sb->size;
+ } else {
+ offset = romfs_resolve (PART_OFFSET (info),
+ HEADERSIZE (sb->name), sb->size, 1,
+ strtok (filename, "/"));
+
+ if (offset == 0) {
+ return offset;
+ }
+ inode = (struct romfs_inode *)(PART_OFFSET (info) + offset);
+ if ((inode->next & 0x7) != 1) {
+ return (romfs_list_inode (info, offset) > 0);
+ }
+
+ size = sb->size;
+ offset = offset + HEADERSIZE (inode->name);
+ }
+
+ inodeoffset = offset + inodeoffset;
+ while (inodeoffset < size) {
+ nextoffset = romfs_list_inode (info, inodeoffset);
+ if (nextoffset == 0)
+ break;
+ inodeoffset = nextoffset;
+ }
+ return 1;
+}
+
+int romfs_info (struct part_info *info)
+{
+ struct romfs_super *sb;
+ sb = (struct romfs_super *)PART_OFFSET (info);
+
+ printf ("name: \t\t%s, len %d B\n", sb->name, strlen (sb->name));
+ printf ("size of SB:\t%d B\n", HEADERSIZE (sb->name));
+ printf ("full size:\t%d B\n", sb->size);
+ printf ("checksum:\t0x%x\n", sb->checksum);
+ return 0;
+}
+
+int romfs_check (struct part_info *info)
+{
+ struct romfs_super *sb;
+ if (info->dev->id->type != MTD_DEV_TYPE_NOR)
+ return 0;
+
+ sb = (struct romfs_super *)PART_OFFSET (info);
+ if ((sb->word0 != 0x2D726F6D) || (sb->word1 != 0x3166732D)) {
+ return 0;
+ }
+ return 1;
+}
+
+#endif
diff --git a/include/configs/ml401.h b/include/configs/ml401.h
index 7eeae70..74fe888 100644
--- a/include/configs/ml401.h
+++ b/include/configs/ml401.h
@@ -1,7 +1,7 @@
/*
* (C) Copyright 2007 Czech Technical University.
*
- * Michal SIMEK <monstr@seznam.cz>
+ * Michal SIMEK <monstr@monstr.eu>
*
* See file CREDITS for list of people who contributed to this
* project.
@@ -32,6 +32,7 @@
#define CONFIG_ML401 1 /* ML401 Board */
/* uart */
+#define XILINX_UARTLITE
#define CONFIG_SERIAL_BASE XILINX_UART_BASEADDR
#define CONFIG_BAUDRATE XILINX_UART_BAUDRATE
#define CFG_BAUDRATE_TABLE { CONFIG_BAUDRATE }
@@ -86,7 +87,7 @@
* 0x11FB_F000 CFG_MONITOR_BASE
* MONITOR_CODE 256kB Env
* 0x13FF_F000 CFG_GBL_DATA_OFFSET
- * GLOBAL_DATA 4kB bd, gd
+ * GLOBAL_DATA 4kB bd, gd
* 0x1400_0000 CFG_SDRAM_BASE + CFG_SDRAM_SIZE
*/
@@ -99,7 +100,7 @@
/* global pointer */
#define CFG_GBL_DATA_SIZE 0x1000 /* size of global data */
/* start of global data */
-#define CFG_GBL_DATA_OFFSET (CFG_SDRAM_BASE + CFG_SDRAM_SIZE - CFG_GBL_DATA_SIZE)
+#define CFG_GBL_DATA_OFFSET (CFG_SDRAM_BASE + CFG_SDRAM_SIZE - CFG_GBL_DATA_SIZE)
/* monitor code */
#define SIZE 0x40000
@@ -145,6 +146,16 @@
#define CFG_FLASH_PROTECTION /* hardware flash protection */
#endif /* !FLASH */
+/* system ace */
+#ifdef XILINX_SYSACE_BASEADDR
+ #define CONFIG_SYSTEMACE
+ /* #define DEBUG_SYSTEMACE */
+ #define SYSTEMACE_CONFIG_FPGA
+ #define CFG_SYSTEMACE_BASE XILINX_SYSACE_BASEADDR
+ #define CFG_SYSTEMACE_WIDTH XILINX_SYSACE_MEM_WIDTH
+ #define CONFIG_DOS_PARTITION
+#endif
+
/*
* BOOTP options
*/
@@ -153,28 +164,21 @@
#define CONFIG_BOOTP_GATEWAY
#define CONFIG_BOOTP_HOSTNAME
-
/*
* Command line configuration.
*/
#include <config_cmd_default.h>
#define CONFIG_CMD_ASKENV
-#define CONFIG_CMD_AUTOSCRIPT
-#define CONFIG_CMD_BDI
#define CONFIG_CMD_CACHE
-#define CONFIG_CMD_EXT2
-#define CONFIG_CMD_FAT
-#define CONFIG_CMD_IMI
#define CONFIG_CMD_IRQ
-#define CONFIG_CMD_LOADB
-#define CONFIG_CMD_LOADS
-#define CONFIG_CMD_MEMORY
-#define CONFIG_CMD_MISC
#define CONFIG_CMD_MFSL
-#define CONFIG_CMD_NET
#define CONFIG_CMD_PING
-#define CONFIG_CMD_RUN
+
+#if defined(CONFIG_SYSTEMACE)
+ #define CONFIG_CMD_EXT2
+ #define CONFIG_CMD_FAT
+#endif
#if defined(FLASH)
#define CONFIG_CMD_ECHO
@@ -186,6 +190,8 @@
#define CONFIG_CMD_ENV
#define CONFIG_CMD_SAVES
#endif
+#else
+ #undef CONFIG_CMD_FLASH
#endif
#if defined(CONFIG_CMD_JFFS2)
@@ -210,24 +216,16 @@
#define CONFIG_BOOTDELAY 30
#define CONFIG_BOOTARGS "root=romfs"
#define CONFIG_HOSTNAME "ml401"
-#define CONFIG_BOOTCOMMAND "base 0;tftp 11000000 image.img;bootm"
+#define CONFIG_BOOTCOMMAND "base 0;tftp 11000000 image.img;bootm"
#define CONFIG_IPADDR 192.168.0.3
-#define CONFIG_SERVERIP 192.168.0.5
-#define CONFIG_GATEWAYIP 192.168.0.1
+#define CONFIG_SERVERIP 192.168.0.5
+#define CONFIG_GATEWAYIP 192.168.0.1
#define CONFIG_ETHADDR 00:E0:0C:00:00:FD
/* architecture dependent code */
#define CFG_USR_EXCEP /* user exception */
#define CFG_HZ 1000
-/* system ace */
-#define CONFIG_SYSTEMACE
-/* #define DEBUG_SYSTEMACE */
-#define SYSTEMACE_CONFIG_FPGA
-#define CFG_SYSTEMACE_BASE XILINX_SYSACE_BASEADDR
-#define CFG_SYSTEMACE_WIDTH XILINX_SYSACE_MEM_WIDTH
-#define CONFIG_DOS_PARTITION
-
#define CONFIG_PREBOOT "echo U-BOOT for ML401;setenv preboot;echo"
#define CONFIG_EXTRA_ENV_SETTINGS "unlock=yes\0" /* hardware flash protection */\
diff --git a/include/configs/suzaku.h b/include/configs/suzaku.h
index 08ac9cb..9a2eec1 100644
--- a/include/configs/suzaku.h
+++ b/include/configs/suzaku.h
@@ -48,6 +48,7 @@
#define CFG_MALLOC_LEN (256 << 10) /* Reserve 256 kB for malloc */
#define CFG_MALLOC_BASE (CFG_MONITOR_BASE - (1024 * 1024))
+#define XILINX_UARTLITE
#define CONFIG_BAUDRATE 115200
#define CFG_BAUDRATE_TABLE { 115200 }
@@ -55,21 +56,16 @@
#define MICROBLAZE_SYSREG_BASE_ADDR 0xFFFFA000
#define MICROBLAZE_SYSREG_RECONFIGURE (1 << 0)
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_BOOTFILESIZE
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-
-
/*
* Command line configuration.
*/
#include <config_cmd_default.h>
+#undef CONFIG_CMD_BDI
+#undef CONFIG_CMD_ENV
+#undef CONFIG_CMD_MEMORY
+#undef CONFIG_CMD_NET
+#undef CONFIG_CMD_MISC
#define CFG_UART1_BASE (0xFFFF2000)
#define CONFIG_SERIAL_BASE CFG_UART1_BASE
@@ -108,4 +104,6 @@
#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET
+#define XILINX_CLOCK_FREQ 50000000
+
#endif /* __CONFIG_H */
diff --git a/include/configs/xupv2p.h b/include/configs/xupv2p.h
index 35001d7..006a132 100644
--- a/include/configs/xupv2p.h
+++ b/include/configs/xupv2p.h
@@ -31,13 +31,34 @@
#define CONFIG_XUPV2P 1
/* uart */
-#define CONFIG_SERIAL_BASE XILINX_UART_BASEADDR
-#define CONFIG_BAUDRATE XILINX_UART_BAUDRATE
+#ifdef XILINX_UARTLITE_BASEADDR
+#define XILINX_UARTLITE
+#define CONFIG_SERIAL_BASE XILINX_UARTLITE_BASEADDR
+#define CONFIG_BAUDRATE XILINX_UARTLITE_BAUDRATE
#define CFG_BAUDRATE_TABLE { CONFIG_BAUDRATE }
+#else
+#ifdef XILINX_UART16550_BASEADDR
+#define CFG_NS16550
+#define CFG_NS16550_SERIAL
+#define CFG_NS16550_REG_SIZE 4
+#define CONFIG_CONS_INDEX 1
+#define CFG_NS16550_COM1 XILINX_UART16550_BASEADDR
+#define CFG_NS16550_CLK XILINX_UART16550_CLOCK_HZ
+
+#define CONFIG_BAUDRATE 115200
+#define CFG_BAUDRATE_TABLE { 9600, 115200 }
+#endif
+#endif
/* ethernet */
-#define CONFIG_EMAC 1
-#define XPAR_EMAC_0_DEVICE_ID XPAR_XEMAC_NUM_INSTANCES
+#ifdef XILINX_EMAC_BASEADDR
+#define XILINX_EMAC 1
+#else
+#ifdef XILINX_EMACLITE_BASEADDR
+#define XILINX_EMACLITE 1
+#endif
+#endif
+#undef ET_DEBUG
/*
* setting reset address
@@ -48,11 +69,13 @@
* U-BOOT auto-relocate to TEXT_BASE. After RESET command Microblaze
* jump to CFG_RESET_ADDRESS where is the original U-BOOT code.
*/
-#define CFG_RESET_ADDRESS 0x36000000
+/* #define CFG_RESET_ADDRESS 0x36000000 */
/* gpio */
+#ifdef XILINX_GPIO_BASEADDR
#define CFG_GPIO_0 1
#define CFG_GPIO_0_ADDR XILINX_GPIO_BASEADDR
+#endif
/* interrupt controller */
#define CFG_INTC_0 1
@@ -119,7 +142,6 @@
#define CFG_ENV_SIZE 0x1000
#define CFG_ENV_ADDR (CFG_MONITOR_BASE - CFG_ENV_SIZE)
-
/*
* BOOTP options
*/
@@ -128,29 +150,24 @@
#define CONFIG_BOOTP_GATEWAY
#define CONFIG_BOOTP_HOSTNAME
-
/*
* Command line configuration.
*/
#include <config_cmd_default.h>
-#define CONFIG_CMD_MEMORY
-#define CONFIG_CMD_IRQ
-#define CONFIG_CMD_BDI
-#define CONFIG_CMD_NET
-#define CONFIG_CMD_IMI
-#define CONFIG_CMD_ECHO
-#define CONFIG_CMD_CACHE
-#define CONFIG_CMD_RUN
-#define CONFIG_CMD_AUTOSCRIPT
+#undef CONFIG_CMD_FLASH
+#undef CONFIG_CMD_IMLS
+
#define CONFIG_CMD_ASKENV
-#define CONFIG_CMD_LOADS
-#define CONFIG_CMD_LOADB
-#define CONFIG_CMD_MISC
-#define CONFIG_CMD_FAT
-#define CONFIG_CMD_EXT2
+#define CONFIG_CMD_CACHE
+#define CONFIG_CMD_IRQ
+#define CONFIG_CMD_MFSL
#define CONFIG_CMD_PING
+#ifdef XILINX_SYSACE_BASEADDR
+#define CONFIG_CMD_EXT2
+#define CONFIG_CMD_FAT
+#endif
/* Miscellaneous configurable options */
#define CFG_PROMPT "U-Boot-mONStR> "
@@ -162,7 +179,7 @@
#define CONFIG_BOOTDELAY 30
#define CONFIG_BOOTARGS "root=romfs"
-#define CONFIG_HOSTNAME "ml401"
+#define CONFIG_HOSTNAME "xupv2p"
#define CONFIG_BOOTCOMMAND "base 0;tftp 11000000 image.img;bootm"
#define CONFIG_IPADDR 192.168.0.3
#define CONFIG_SERVERIP 192.168.0.5
@@ -178,11 +195,13 @@
"echo"
/* system ace */
+#ifdef XILINX_SYSACE_BASEADDR
#define CONFIG_SYSTEMACE
/* #define DEBUG_SYSTEMACE */
#define SYSTEMACE_CONFIG_FPGA
#define CFG_SYSTEMACE_BASE XILINX_SYSACE_BASEADDR
#define CFG_SYSTEMACE_WIDTH XILINX_SYSACE_MEM_WIDTH
#define CONFIG_DOS_PARTITION
+#endif
#endif /* __CONFIG_H */
diff --git a/lib_microblaze/time.c b/lib_microblaze/time.c
index 3fa1b11..0fef834 100644
--- a/lib_microblaze/time.c
+++ b/lib_microblaze/time.c
@@ -26,9 +26,17 @@
#include <common.h>
+#ifdef CFG_TIMER_0
void udelay (unsigned long usec)
{
int i;
i = get_timer (0);
while ((get_timer (0) - i) < (usec / 1000)) ;
}
+#else
+void udelay (unsigned long usec)
+{
+ unsigned int i;
+ for (i = 0; i < (usec * XILINX_CLOCK_FREQ / 10000000); i++);
+}
+#endif