diff --git a/board/mbx8xx/mbx8xx.c b/board/mbx8xx/mbx8xx.c
new file mode 100644
index 0000000..9a9bf80
--- /dev/null
+++ b/board/mbx8xx/mbx8xx.c
@@ -0,0 +1,379 @@
+/*
+ * (C) Copyright 2000
+ * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
+ * Marius Groeger <mgroeger@sysgo.de>
+ *
+ * Board specific routines for the MBX
+ *
+ * - initialisation
+ * - interface to VPD data (mac address, clock speeds)
+ * - memory controller
+ * - serial io initialisation
+ * - ethernet io initialisation
+ *
+ * -----------------------------------------------------------------
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <commproc.h>
+#include <mpc8xx.h>
+#include "dimm.h"
+#include "vpd.h"
+#include "csr.h"
+
+/* ------------------------------------------------------------------------- */
+
+static const uint sdram_table_40[] = {
+	/* DRAM - single read. (offset 0 in upm RAM)
+	 */
+	0xCFAFC004, 0x0FAFC404, 0x0CAF0C04, 0x30AF0C00,
+	0xF1BF4805, 0xFFFFC005, 0xFFFFC005, 0xFFFFC005,
+
+	/* DRAM - burst read. (offset 8 in upm RAM)
+	 */
+	0xCFAFC004, 0x0FAFC404, 0x0CAF0C04, 0x03AF0C08,
+	0x0CAF0C04, 0x03AF0C08, 0x0CAF0C04, 0x03AF0C08,
+	0x0CAF0C04, 0x30AF0C00, 0xF3BF4805, 0xFFFFC005,
+	0xFFFFC005, 0xFFFFC005, 0xFFFFC005, 0xFFFFC005,
+
+	/* DRAM - single write. (offset 18 in upm RAM)
+	 */
+	0xCFFF0004, 0x0FFF0404, 0x0CFF0C00, 0x33FF4804,
+	0xFFFFC005, 0xFFFFC005, 0xFFFFC005, 0xFFFFC005,
+
+	/* DRAM - burst write. (offset 20 in upm RAM)
+	 */
+	0xCFFF0004, 0x0FFF0404, 0x0CFF0C00, 0x03FF0C0C,
+	0x0CFF0C00, 0x03FF0C0C, 0x0CFF0C00, 0x03FF0C0C,
+	0x0CFF0C00, 0x33FF4804, 0xFFFFC005, 0xFFFFC005,
+	0xFFFFC005, 0xFFFFC005, 0xFFFFC005, 0xFFFFC005,
+
+	/* refresh  (offset 30 in upm RAM)
+	 */
+	0xFCFFC004, 0xC0FFC004, 0x01FFC004, 0x0FFFC004,
+	0x3FFFC004, 0xFFFFC005, 0xFFFFC005, 0xFFFFC005,
+	0xFFFFC005, 0xFFFFC005, 0xFFFFC005, 0xFFFFC005,
+
+	/* exception. (offset 3c in upm RAM)
+	 */
+	0xFFFFC007, 0xFFFFC007, 0xFFFFC007, 0xFFFFC007,
+};
+
+static const uint sdram_table_50[] = {
+	/* DRAM - single read. (offset 0 in upm RAM)
+	 */
+	0xCFAFC004, 0x0FAFC404, 0x0CAF8C04, 0x10AF0C04,
+	0xF0AF0C00, 0xF3BF4805, 0xFFFFC005, 0xFFFFC005,
+
+	/* DRAM - burst read. (offset 8 in upm RAM)
+	 */
+	0xCFAFC004, 0X0FAFC404, 0X0CAF8C04, 0X00AF0C04,
+  /*	0X07AF0C08, 0X0CAF0C04, 0X01AF0C04, 0X0FAF0C04,	*/
+	0X07AF0C08, 0X0CAF0C04, 0X01AF0C04, 0X0FAF0C08,
+	0X0CAF0C04, 0X01AF0C04, 0X0FAF0C08, 0X0CAF0C04,
+  /*	0X10AF0C04, 0XF0AFC000, 0XF3FF4805, 0XFFFFC005,	*/
+	0X10AF0C04, 0XF0AFC000, 0XF3BF4805, 0XFFFFC005,
+
+	/* DRAM - single write. (offset 18 in upm RAM)
+	 */
+	0xCFFF0004, 0x0FFF0404, 0x0CFF0C00, 0x13FF4804,
+	0xFFFFC004, 0xFFFFC005, 0xFFFFC005, 0xFFFFC005,
+
+	/* DRAM - burst write. (offset 20 in upm RAM)
+	 */
+	0xCFFF0004, 0x0FFF0404, 0x0CFF0C00, 0x03FF0C0C,
+	0x0CFF0C00, 0x03FF0C0C, 0x0CFF0C00, 0x03FF0C0C,
+	0x0CFF0C00, 0x13FF4804, 0xFFFFC004, 0xFFFFC005,
+	0xFFFFC005, 0xFFFFC005, 0xFFFFC005, 0xFFFFC005,
+
+	/* refresh  (offset 30 in upm RAM)
+	 */
+	0xFCFFC004, 0xC0FFC004, 0x01FFC004, 0x0FFFC004,
+	0x1FFFC004, 0xFFFFC004, 0xFFFFC005, 0xFFFFC005,
+	0xFFFFC005, 0xFFFFC005, 0xFFFFC005, 0xFFFFC005,
+
+	/* exception. (offset 3c in upm RAM)
+	 */
+	0xFFFFC007, 0xFFFFC007, 0xFFFFC007, 0xFFFFC007,
+};
+
+/* ------------------------------------------------------------------------- */
+
+static unsigned int get_reffreq(void);
+static unsigned int board_get_cpufreq(void);
+
+void mbx_init (void)
+{
+	volatile immap_t *immr = (immap_t *) CFG_IMMR;
+	volatile memctl8xx_t *memctl = &immr->im_memctl;
+	ulong speed, refclock, plprcr, sccr;
+	ulong br0_32 = memctl->memc_br0 & 0x400;
+
+	/* real-time clock status and control register */
+	immr->im_sitk.sitk_rtcsck = KAPWR_KEY;
+	immr->im_sit.sit_rtcsc = 0x00C3;
+
+	/* SIEL and SIMASK Registers (see MBX PRG 2-3) */
+	immr->im_siu_conf.sc_simask = 0x00000000;
+	immr->im_siu_conf.sc_siel = 0xAAAA0000;
+	immr->im_siu_conf.sc_tesr = 0xFFFFFFFF;
+
+	/*
+	 * Prepare access to i2c bus. The MBX offers 3 devices on the i2c bus:
+	 * 1. Vital Product Data (contains clock speeds, MAC address etc, see vpd.h)
+	 * 2. RAM  Specs (see dimm.h)
+	 * 2. DIMM Specs (see dimm.h)
+	 */
+	vpd_init ();
+
+	/* system clock and reset control register */
+	immr->im_clkrstk.cark_sccrk = KAPWR_KEY;
+	sccr = immr->im_clkrst.car_sccr;
+	sccr &= SCCR_MASK;
+	sccr |= CFG_SCCR;
+	immr->im_clkrst.car_sccr = sccr;
+
+	speed = board_get_cpufreq ();
+	refclock = get_reffreq ();
+
+#if ((CFG_PLPRCR & PLPRCR_MF_MSK) != 0)
+	plprcr = CFG_PLPRCR;
+#else
+	plprcr = immr->im_clkrst.car_plprcr;
+	plprcr &= PLPRCR_MF_MSK;	/* isolate MF field */
+	plprcr |= CFG_PLPRCR;		/* reset control bits   */
+#endif
+
+#ifdef CFG_USE_OSCCLK			/* See doc/README.MBX ! */
+	plprcr |= ((speed + refclock / 2) / refclock - 1) << 20;
+#endif
+
+	immr->im_clkrstk.cark_plprcrk = KAPWR_KEY;
+	immr->im_clkrst.car_plprcr = plprcr;
+
+	/*
+	 * preliminary setup of memory controller:
+	 * - map Flash, otherwise configuration/status
+	 *    registers won't be accessible when read
+	 *    by board_init_f.
+	 * - map NVRAM and configuation/status registers.
+	 * - map pci registers.
+	 * - DON'T map ram yet, this is done in initdram().
+	 */
+	switch (speed / 1000000) {
+	case 40:
+		memctl->memc_br0 = 0xFE000000 | br0_32 | 1;
+		memctl->memc_or0 = 0xFF800930;
+		memctl->memc_or4 = CFG_NVRAM_OR | 0x920;
+		memctl->memc_br4 = CFG_NVRAM_BASE | 0x401;
+		break;
+	case 50:
+		memctl->memc_br0 = 0xFE000000 | br0_32 | 1;
+		memctl->memc_or0 = 0xFF800940;
+		memctl->memc_or4 = CFG_NVRAM_OR | 0x930;
+		memctl->memc_br4 = CFG_NVRAM_BASE | 0x401;
+		break;
+	default:
+		hang ();
+		break;
+	}
+#ifdef CONFIG_USE_PCI
+	memctl->memc_or5 = CFG_PCIMEM_OR;
+	memctl->memc_br5 = CFG_PCIMEM_BASE | 0x001;
+	memctl->memc_or6 = CFG_PCIBRIDGE_OR;
+	memctl->memc_br6 = CFG_PCIBRIDGE_BASE | 0x001;
+#endif
+	/*
+	 * FIXME: I do not understand why I have to call this to
+	 * initialise the control register here before booting from
+	 * the PCMCIA card but if I do not the Linux kernel falls
+	 * over in a big heap. If you can answer this question I
+	 * would like to know about it.
+	 */
+	board_ether_init();
+}
+
+void board_serial_init (void)
+{
+	MBX_CSR1 &= ~(CSR1_COM1EN | CSR1_XCVRDIS);
+}
+
+void board_ether_init (void)
+{
+	MBX_CSR1 &= ~(CSR1_EAEN | CSR1_ELEN);
+	MBX_CSR1 |= CSR1_ETEN | CSR1_TPEN | CSR1_FDDIS;
+}
+
+static unsigned int board_get_cpufreq (void)
+{
+#ifndef CONFIG_8xx_GCLK_FREQ
+	vpd_packet_t *packet;
+
+	packet = vpd_find_packet (VPD_PID_ICS);
+	return *((ulong *) packet->data);
+#else
+	return((unsigned int)CONFIG_8xx_GCLK_FREQ );
+#endif /* CONFIG_8xx_GCLK_FREQ */
+}
+
+static unsigned int get_reffreq (void)
+{
+	vpd_packet_t *packet;
+
+	packet = vpd_find_packet (VPD_PID_RCS);
+	return *((ulong *) packet->data);
+}
+
+void board_get_enetaddr (uchar * addr)
+{
+	int i;
+	vpd_packet_t *packet;
+
+	packet = vpd_find_packet (VPD_PID_EA);
+	for (i = 0; i < 6; i++)
+		addr[i] = packet->data[i];
+}
+
+/*
+ * Check Board Identity:
+ */
+
+int checkboard (void)
+{
+	vpd_packet_t *packet;
+	int i;
+	const char *const fmt =
+		"\n	 *** Warning: Low Battery Status - %s Battery ***";
+
+	puts ("Board: ");
+
+	packet = vpd_find_packet (VPD_PID_PID);
+	for (i = 0; i < packet->size; i++) {
+		serial_putc (packet->data[i]);
+	}
+	packet = vpd_find_packet (VPD_PID_MT);
+	for (i = 0; i < packet->size; i++) {
+		serial_putc (packet->data[i]);
+	}
+	serial_putc ('(');
+	packet = vpd_find_packet (VPD_PID_FAN);
+	for (i = 0; i < packet->size; i++) {
+		serial_putc (packet->data[i]);
+	}
+	serial_putc (')');
+
+	if (!(MBX_CSR2 & SR2_BATGD))
+		printf (fmt, "On-Board");
+	if (!(MBX_CSR2 & SR2_NVBATGD))
+		printf (fmt, "NVRAM");
+
+	serial_putc ('\n');
+
+	return (0);
+}
+
+/* ------------------------------------------------------------------------- */
+
+static ulong get_ramsize (dimm_t * dimm)
+{
+	ulong size = 0;
+
+	if (dimm->fmt == 1 || dimm->fmt == 2 || dimm->fmt == 3
+		|| dimm->fmt == 4) {
+		size = (1 << (dimm->n_row + dimm->n_col)) * dimm->n_banks *
+			((dimm->data_w_hi << 8 | dimm->data_w_lo) / 8);
+	}
+
+	return size;
+}
+
+long int initdram (int board_type)
+{
+	volatile immap_t *immap = (immap_t *) CFG_IMMR;
+	volatile memctl8xx_t *memctl = &immap->im_memctl;
+	unsigned long ram_sz = 0;
+	unsigned long dimm_sz = 0;
+	dimm_t vpd_dimm, vpd_dram;
+	unsigned int speed = board_get_cpufreq () / 1000000;
+
+	if (vpd_read (0xa2, (uchar *) & vpd_dimm, sizeof (vpd_dimm), 0) > 0) {
+		dimm_sz = get_ramsize (&vpd_dimm);
+	}
+	if (vpd_read (0xa6, (uchar *) & vpd_dram, sizeof (vpd_dram), 0) > 0) {
+		ram_sz = get_ramsize (&vpd_dram);
+	}
+
+	/*
+	 * Only initialize memory controller when running from FLASH.
+	 * When running from RAM, don't touch it.
+	 */
+	if ((ulong) initdram & 0xff000000) {
+		ulong dimm_bank;
+		ulong br0_32 = memctl->memc_br0 & 0x400;
+
+		switch (speed) {
+		case 40:
+			upmconfig (UPMA, (uint *) sdram_table_40,
+					   sizeof (sdram_table_40) / sizeof (uint));
+			memctl->memc_mptpr = 0x0200;
+			memctl->memc_mamr = dimm_sz ? 0x06801000 : 0x13801000;
+			memctl->memc_or7 = 0xff800930;
+			memctl->memc_br7 = 0xfc000000 | (br0_32 ^ br0_32) | 1;
+			break;
+		case 50:
+			upmconfig (UPMA, (uint *) sdram_table_50,
+					   sizeof (sdram_table_50) / sizeof (uint));
+			memctl->memc_mptpr = 0x0200;
+			memctl->memc_mamr = dimm_sz ? 0x08801000 : 0x1880100;
+			memctl->memc_or7 = 0xff800940;
+			memctl->memc_br7 = 0xfc000000 | (br0_32 ^ br0_32) | 1;
+			break;
+		default:
+			hang ();
+			break;
+		}
+
+		/* now map ram and dimm, largest one first */
+		dimm_bank = dimm_sz / 2;
+		if (!dimm_sz) {
+			memctl->memc_or1 = ~(ram_sz - 1) | 0x400;
+			memctl->memc_br1 = CFG_SDRAM_BASE | 0x81;
+			memctl->memc_br2 = 0;
+			memctl->memc_br3 = 0;
+		} else if (ram_sz > dimm_bank) {
+			memctl->memc_or1 = ~(ram_sz - 1) | 0x400;
+			memctl->memc_br1 = CFG_SDRAM_BASE | 0x81;
+			memctl->memc_or2 = ~(dimm_bank - 1) | 0x400;
+			memctl->memc_br2 = (CFG_SDRAM_BASE + ram_sz) | 0x81;
+			memctl->memc_or3 = ~(dimm_bank - 1) | 0x400;
+			memctl->memc_br3 = (CFG_SDRAM_BASE + ram_sz + dimm_bank) \
+								     | 0x81;
+		} else {
+			memctl->memc_or2 = ~(dimm_bank - 1) | 0x400;
+			memctl->memc_br2 = CFG_SDRAM_BASE | 0x81;
+			memctl->memc_or3 = ~(dimm_bank - 1) | 0x400;
+			memctl->memc_br3 = (CFG_SDRAM_BASE + dimm_bank) | 0x81;
+			memctl->memc_or1 = ~(ram_sz - 1) | 0x400;
+			memctl->memc_br1 = (CFG_SDRAM_BASE + dimm_sz) | 0x81;
+		}
+	}
+
+	return ram_sz + dimm_sz;
+}