net ppc: fix ethernet device names with spaces
since commit 1384f3bb8a4f9066805b70c1418eda78ecb73fdd ethernet names
with spaces drop a
Warning: eth device name has a space!
message. This patch fix it for:
- "FEC ETHERNET" devices found on
mpc512x, mpc5xxx, mpc8xx and mpc8220 boards.
renamed to "FEC".
- "SCC ETHERNET" devices found on
mpc8xx, mpc82xx based boards. Renamed to "SCC".
- "HDLC ETHERNET" devices found on mpc8xx boards
Renamed to "HDLC"
- "FCC ETHERNET" devices found on mpc8260 and mpc85xx based
boards. Renamed to "FCC"
Tested on the kup4k board.
Signed-off-by: Heiko Schocher <hs@denx.de>
Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
diff --git a/board/freescale/mpc8560ads/mpc8560ads.c b/board/freescale/mpc8560ads/mpc8560ads.c
index 489f90b..423e9d7 100644
--- a/board/freescale/mpc8560ads/mpc8560ads.c
+++ b/board/freescale/mpc8560ads/mpc8560ads.c
@@ -236,7 +236,7 @@
#endif
#if defined(CONFIG_MII) && defined(CONFIG_ETHER_ON_FCC)
/* reset PHY */
- miiphy_reset("FCC1 ETHERNET", 0x0);
+ miiphy_reset("FCC1", 0x0);
/* change PHY address to 0x02 */
bb_miiphy_write(NULL, 0, PHY_MIPSCR, 0xf028);
diff --git a/board/funkwerk/vovpn-gw/vovpn-gw.c b/board/funkwerk/vovpn-gw/vovpn-gw.c
index 889ba3f..e856ada 100644
--- a/board/funkwerk/vovpn-gw/vovpn-gw.c
+++ b/board/funkwerk/vovpn-gw/vovpn-gw.c
@@ -198,7 +198,7 @@
iop->pdat |= 0x00080000;
for (i=0; i<100; i++) {
udelay(20000);
- if (bb_miiphy_read("FCC1 ETHERNET", CONFIG_SYS_PHY_ADDR,2,&val ) == 0) {
+ if (bb_miiphy_read("FCC1", CONFIG_SYS_PHY_ADDR,2,&val ) == 0) {
break;
}
}
diff --git a/board/keymile/common/keymile_hdlc_enet.c b/board/keymile/common/keymile_hdlc_enet.c
index ce5e4d6..a545211 100644
--- a/board/keymile/common/keymile_hdlc_enet.c
+++ b/board/keymile/common/keymile_hdlc_enet.c
@@ -40,7 +40,7 @@
#define TOUT_LOOP 50000
/*
- * Since, except during initialization, ethact is always HDLC ETHERNET
+ * Since, except during initialization, ethact is always HDLC
* while we're in the driver, just use serial_printf() everywhere for
* output. This avoids possible conflicts when netconsole is being
* used.
@@ -124,7 +124,7 @@
seth = dev;
#endif
- sprintf(dev->name, "HDLC ETHERNET");
+ sprintf(dev->name, "HDLC");
dev->init = keymile_hdlc_enet_init;
dev->halt = keymile_hdlc_enet_halt;
dev->send = keymile_hdlc_enet_send;
diff --git a/board/keymile/km8xx/km8xx_hdlc_enet.c b/board/keymile/km8xx/km8xx_hdlc_enet.c
index 0478288..ca00576 100644
--- a/board/keymile/km8xx/km8xx_hdlc_enet.c
+++ b/board/keymile/km8xx/km8xx_hdlc_enet.c
@@ -34,7 +34,7 @@
char keymile_slot; /* our slot number in the backplane */
/*
- * Since, except during initialization, ethact is always HDLC ETHERNET
+ * Since, except during initialization, ethact is always HDLC
* while we're in the driver, just use serial_printf() everywhere for
* output. This avoids possible conflicts when netconsole is being
* used.
diff --git a/board/motionpro/motionpro.c b/board/motionpro/motionpro.c
index b369219..47ef6e5 100644
--- a/board/motionpro/motionpro.c
+++ b/board/motionpro/motionpro.c
@@ -90,8 +90,8 @@
{
unsigned short mode_control;
- miiphy_read("FEC ETHERNET", CONFIG_PHY_ADDR, 0x15, &mode_control);
- miiphy_write("FEC ETHERNET", CONFIG_PHY_ADDR, 0x15,
+ miiphy_read("FEC", CONFIG_PHY_ADDR, 0x15, &mode_control);
+ miiphy_write("FEC", CONFIG_PHY_ADDR, 0x15,
mode_control & 0xfffe);
return;
}
diff --git a/board/sbc8560/sbc8560.c b/board/sbc8560/sbc8560.c
index 10ba62f..77abde5 100644
--- a/board/sbc8560/sbc8560.c
+++ b/board/sbc8560/sbc8560.c
@@ -225,7 +225,7 @@
#endif
#if defined(CONFIG_MII) && defined(CONFIG_ETHER_ON_FCC)
/* reset PHY */
- miiphy_reset("FCC1 ETHERNET", 0x0);
+ miiphy_reset("FCC1", 0x0);
/* change PHY address to 0x02 */
bb_miiphy_write(NULL, 0, PHY_MIPSCR, 0xf028);
diff --git a/board/stx/stxgp3/stxgp3.c b/board/stx/stxgp3/stxgp3.c
index 3804fe0..25d5211 100644
--- a/board/stx/stxgp3/stxgp3.c
+++ b/board/stx/stxgp3/stxgp3.c
@@ -239,7 +239,7 @@
#endif
#if defined(CONFIG_MII) && defined(CONFIG_ETHER_ON_FCC)
/* reset PHY */
- miiphy_reset("FCC1 ETHERNET", 0x0);
+ miiphy_reset("FCC1", 0x0);
/* change PHY address to 0x02 */
bb_miiphy_write(NULL, 0, PHY_MIPSCR, 0xf028);
diff --git a/board/stx/stxssa/stxssa.c b/board/stx/stxssa/stxssa.c
index 0b2584c..1e0acab 100644
--- a/board/stx/stxssa/stxssa.c
+++ b/board/stx/stxssa/stxssa.c
@@ -238,7 +238,7 @@
#endif
#if defined(CONFIG_MII) && defined(CONFIG_ETHER_ON_FCC)
/* reset PHY */
- miiphy_reset("FCC1 ETHERNET", 0x0);
+ miiphy_reset("FCC1", 0x0);
/* change PHY address to 0x02 */
bb_miiphy_write(NULL, 0, PHY_MIPSCR, 0xf028);
diff --git a/board/stx/stxxtc/stxxtc.c b/board/stx/stxxtc/stxxtc.c
index 717dbe2..6693a70 100644
--- a/board/stx/stxxtc/stxxtc.c
+++ b/board/stx/stxxtc/stxxtc.c
@@ -481,12 +481,12 @@
mii_init();
for (phyno = 0; phyno < 32; ++phyno) {
- miiphy_read("FEC ETHERNET", phyno, PHY_PHYIDR1, &v);
+ miiphy_read("FEC", phyno, PHY_PHYIDR1, &v);
if (v == 0xFFFF)
continue;
- miiphy_write("FEC ETHERNET", phyno, PHY_BMCR, PHY_BMCR_POWD);
+ miiphy_write("FEC", phyno, PHY_BMCR, PHY_BMCR_POWD);
udelay(10000);
- miiphy_write("FEC ETHERNET", phyno, PHY_BMCR, PHY_BMCR_RESET | PHY_BMCR_AUTON);
+ miiphy_write("FEC", phyno, PHY_BMCR, PHY_BMCR_RESET | PHY_BMCR_AUTON);
udelay(10000);
}
}
diff --git a/board/tqc/tqm8xx/tqm8xx.c b/board/tqc/tqm8xx/tqm8xx.c
index 53f79e8..cde780b 100644
--- a/board/tqc/tqm8xx/tqm8xx.c
+++ b/board/tqc/tqm8xx/tqm8xx.c
@@ -745,13 +745,13 @@
return 0;
for (i = 0; i < 2; i++) {
- ret = miiphy_read("FEC ETHERNET", phy[i], PHY_BMCR, ®);
+ ret = miiphy_read("FEC", phy[i], PHY_BMCR, ®);
if (ret) {
printf("Cannot read BMCR on PHY %d\n", phy[i]);
return 0;
}
/* Auto-negotiation off, hard set full duplex, 100Mbps */
- ret = miiphy_write("FEC ETHERNET", phy[i],
+ ret = miiphy_write("FEC", phy[i],
PHY_BMCR, (reg | PHY_BMCR_100MB |
PHY_BMCR_DPLX) & ~PHY_BMCR_AUTON);
if (ret) {