ARM64: zynqmp: Show information about bootmode
Showing information about bootmode is very useful to make sure
that correct bootmode is selected.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
diff --git a/board/xilinx/zynqmp/zynqmp.c b/board/xilinx/zynqmp/zynqmp.c
index 6bdec20..9c176d0 100644
--- a/board/xilinx/zynqmp/zynqmp.c
+++ b/board/xilinx/zynqmp/zynqmp.c
@@ -82,22 +82,28 @@
reg = readl(&crlapb_base->boot_mode);
bootmode = reg & BOOT_MODES_MASK;
+ puts("Bootmode: ");
switch (bootmode) {
case JTAG_MODE:
- setenv("modeboot", "netboot");
+ puts("JTAG_MODE\n");
+ setenv("modeboot", "jtagboot");
break;
case QSPI_MODE_24BIT:
case QSPI_MODE_32BIT:
setenv("modeboot", "qspiboot");
+ puts("QSPI_MODE\n");
break;
case SD_MODE:
case EMMC_MODE:
+ puts("SD_MODE\n");
setenv("modeboot", "sdboot");
break;
case SD_MODE1:
+ puts("SD_MODE1\n");
setenv("modeboot", "sdboot1");
break;
case NAND_MODE:
+ puts("NAND_MODE\n");
setenv("modeboot", "nandboot");
break;
default: