arm: dts: sunxi: h3: Update DT files
Update the H3 DT files from the Linux 5.12 release.
The changes update some boards, and don't affect U-Boot, but fix Gigabit
Ethernet when this DT is passed on to the Linux kernel.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
diff --git a/arch/arm/dts/sun8i-h2-plus-bananapi-m2-zero.dts b/arch/arm/dts/sun8i-h2-plus-bananapi-m2-zero.dts
index d277d04..f3f7a2c 100644
--- a/arch/arm/dts/sun8i-h2-plus-bananapi-m2-zero.dts
+++ b/arch/arm/dts/sun8i-h2-plus-bananapi-m2-zero.dts
@@ -31,7 +31,7 @@
pwr_led {
label = "bananapi-m2-zero:red:pwr";
- gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>; /* PL10 */
+ gpios = <&r_pio 0 10 GPIO_ACTIVE_LOW>; /* PL10 */
default-state = "on";
};
};
@@ -62,6 +62,35 @@
states = <1100000 0>, <1300000 1>;
};
+ reg_vcc_dram: vcc-dram {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc-dram";
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-always-on;
+ regulator-boot-on;
+ enable-active-high;
+ gpio = <&r_pio 0 9 GPIO_ACTIVE_HIGH>; /* PL9 */
+ vin-supply = <®_vcc5v0>;
+ };
+
+ reg_vcc1v2: vcc1v2 {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc1v2";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-always-on;
+ regulator-boot-on;
+ enable-active-high;
+ gpio = <&r_pio 0 8 GPIO_ACTIVE_HIGH>; /* PL8 */
+ vin-supply = <®_vcc5v0>;
+ };
+
+ poweroff {
+ compatible = "regulator-poweroff";
+ cpu-supply = <®_vcc1v2>;
+ };
+
wifi_pwrseq: wifi_pwrseq {
compatible = "mmc-pwrseq-simple";
reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 */
@@ -125,6 +154,7 @@
bluetooth {
compatible = "brcm,bcm43438-bt";
+ max-speed = <1500000>;
clocks = <&rtc 1>;
clock-names = "lpo";
vbat-supply = <®_vcc3v3>;
@@ -134,6 +164,70 @@
shutdown-gpios = <&pio 6 12 GPIO_ACTIVE_HIGH>; /* PG12 */
};
+};
+
+&pio {
+ gpio-line-names =
+ /* PA */
+ "CON2-P13", "CON2-P11", "CON2-P22", "CON2-P15",
+ "CON3-P03", "CON3-P02", "CON2-P07", "CON2-P29",
+ "CON2-P31", "CON2-P33", "CON2-P35", "CON2-P05",
+ "CON2-P03", "CON2-P08", "CON2-P10", "CON2-P16",
+ "CON2-P12", "CON2-P37", "CON2-P28", "CON2-P27",
+ "CON2-P40", "CON2-P38", "", "",
+ "", "", "", "", "", "", "", "",
+
+ /* PB */
+ "", "", "", "", "", "", "", "",
+ "", "", "", "", "", "", "", "",
+ "", "", "", "", "", "", "", "",
+ "", "", "", "", "", "", "", "",
+
+ /* PC */
+ "CON2-P19", "CON2-P21", "CON2-P23", "CON2-P24",
+ "CON2-P18", "", "", "CON2-P26",
+ "", "", "", "", "", "", "", "",
+ "", "", "", "", "", "", "", "",
+ "", "", "", "", "", "", "", "",
+
+ /* PD */
+ "", "", "", "", "", "", "", "",
+ "", "", "", "", "", "", "CSI-PWR-EN", "",
+ "", "", "", "", "", "", "", "",
+ "", "", "", "", "", "", "", "",
+
+ /* PE */
+ "CN3-P17", "CN3-P13", "CN3-P09", "CN3-P07",
+ "CN3-P19", "CN3-P21", "CN3-P22", "CN3-P20",
+ "CN3-P18", "CN3-P16", "CN3-P14", "CN3-P12",
+ "CN3-P05", "CN3-P03", "CN3-P06", "CN3-P08",
+ "", "", "", "", "", "", "", "",
+ "", "", "", "", "", "", "", "",
+
+ /* PF */
+ "SDC0-D1", "SDC0-D0", "SDC0-CLK", "SDC0-CMD", "SDC0-D3",
+ "SDC0-D2", "SDC0-DET", "",
+ "", "", "", "", "", "", "", "",
+ "", "", "", "", "", "", "", "",
+ "", "", "", "", "", "", "", "",
+
+ /* PG */
+ "WL-SDIO-CLK", "WL-SDIO-CMD", "WL-SDIO-D0", "WL-SDIO-D1",
+ "WL-SDIO-D2", "WL-SDIO-D3", "BT-UART-TX", "BT-UART-RX",
+ "BT-UART-RTS", "BT-UART-CTS", "WL-WAKE-AP", "BT-WAKE-AP",
+ "BT-RST-N", "AP-WAKE-BT", "", "",
+ "", "", "", "", "", "", "", "",
+ "", "", "", "", "", "", "", "";
+};
+
+&r_pio {
+ gpio-line-names =
+ /* PL */
+ "", "CPUX-SET", "CON2-P32", "POWER-KEY", "CON2-P36",
+ "VCC-IO-EN", "USB0-ID", "WL-PWR-EN",
+ "PWR-STB", "PWR-DRAM", "PWR-LED", "IR-RX", "", "", "", "",
+ "", "", "", "", "", "", "", "",
+ "", "", "", "", "", "", "", "";
};
&usb_otg {
diff --git a/arch/arm/dts/sun8i-h3-beelink-x2.dts b/arch/arm/dts/sun8i-h3-beelink-x2.dts
index 45a2444..62b5280 100644
--- a/arch/arm/dts/sun8i-h3-beelink-x2.dts
+++ b/arch/arm/dts/sun8i-h3-beelink-x2.dts
@@ -75,13 +75,13 @@
leds {
compatible = "gpio-leds";
- blue {
+ led-0 {
label = "beelink-x2:blue:pwr";
gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>; /* PL10 */
default-state = "on";
};
- red {
+ led-1 {
label = "beelink-x2:red:standby";
gpios = <&pio 0 15 GPIO_ACTIVE_HIGH>; /* PA15 */
};
diff --git a/arch/arm/dts/sun8i-h3-nanopi-duo2.dts b/arch/arm/dts/sun8i-h3-nanopi-duo2.dts
index 6b14927..8e7dfcf 100644
--- a/arch/arm/dts/sun8i-h3-nanopi-duo2.dts
+++ b/arch/arm/dts/sun8i-h3-nanopi-duo2.dts
@@ -25,13 +25,13 @@
leds {
compatible = "gpio-leds";
- pwr {
+ led-0 {
label = "nanopi:red:pwr";
gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>; /* PL10 */
default-state = "on";
};
- status {
+ led-1 {
label = "nanopi:green:status";
gpios = <&pio 0 10 GPIO_ACTIVE_HIGH>; /* PA10 */
};
diff --git a/arch/arm/dts/sun8i-h3-nanopi-neo-air.dts b/arch/arm/dts/sun8i-h3-nanopi-neo-air.dts
index 07867a0..be49eab 100644
--- a/arch/arm/dts/sun8i-h3-nanopi-neo-air.dts
+++ b/arch/arm/dts/sun8i-h3-nanopi-neo-air.dts
@@ -61,13 +61,13 @@
leds {
compatible = "gpio-leds";
- pwr {
+ led-0 {
label = "nanopi:green:pwr";
gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>; /* PL10 */
default-state = "on";
};
- status {
+ led-1 {
label = "nanopi:blue:status";
gpios = <&pio 0 10 GPIO_ACTIVE_HIGH>; /* PA10 */
};
diff --git a/arch/arm/dts/sun8i-h3-nanopi.dtsi b/arch/arm/dts/sun8i-h3-nanopi.dtsi
index 4df29a6..c7c3e7d 100644
--- a/arch/arm/dts/sun8i-h3-nanopi.dtsi
+++ b/arch/arm/dts/sun8i-h3-nanopi.dtsi
@@ -60,13 +60,13 @@
leds {
compatible = "gpio-leds";
- status {
+ led-0 {
label = "nanopi:blue:status";
gpios = <&pio 0 10 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "heartbeat";
};
- pwr {
+ led-1 {
label = "nanopi:green:pwr";
gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>;
default-state = "on";
diff --git a/arch/arm/dts/sun8i-h3-orangepi-pc-plus.dts b/arch/arm/dts/sun8i-h3-orangepi-pc-plus.dts
index 71fb732..babf4cf 100644
--- a/arch/arm/dts/sun8i-h3-orangepi-pc-plus.dts
+++ b/arch/arm/dts/sun8i-h3-orangepi-pc-plus.dts
@@ -53,11 +53,6 @@
};
};
-&emac {
- /* LEDs changed to active high on the plus */
- /delete-property/ allwinner,leds-active-low;
-};
-
&mmc1 {
vmmc-supply = <®_vcc3v3>;
bus-width = <4>;
diff --git a/arch/arm/dts/sun8i-h3-orangepi-plus2e.dts b/arch/arm/dts/sun8i-h3-orangepi-plus2e.dts
index 6dbf7b2..b6ca45d 100644
--- a/arch/arm/dts/sun8i-h3-orangepi-plus2e.dts
+++ b/arch/arm/dts/sun8i-h3-orangepi-plus2e.dts
@@ -67,7 +67,7 @@
pinctrl-0 = <&emac_rgmii_pins>;
phy-supply = <®_gmac_3v3>;
phy-handle = <&ext_rgmii_phy>;
- phy-mode = "rgmii";
+ phy-mode = "rgmii-id";
status = "okay";
};
diff --git a/arch/arm/dts/sun8i-h3-orangepi-zero-plus2.dts b/arch/arm/dts/sun8i-h3-orangepi-zero-plus2.dts
index b8f46e2..561ea1d 100644
--- a/arch/arm/dts/sun8i-h3-orangepi-zero-plus2.dts
+++ b/arch/arm/dts/sun8i-h3-orangepi-zero-plus2.dts
@@ -70,6 +70,21 @@
};
};
+ leds {
+ compatible = "gpio-leds";
+
+ led-0 {
+ label = "orangepi:green:pwr";
+ gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>;
+ default-state = "on";
+ };
+
+ led-1 {
+ label = "orangepi:red:status";
+ gpios = <&pio 0 17 GPIO_ACTIVE_HIGH>;
+ };
+ };
+
reg_vcc3v3: vcc3v3 {
compatible = "regulator-fixed";
regulator-name = "vcc3v3";
@@ -88,6 +103,10 @@
status = "okay";
};
+&ehci0 {
+ status = "okay";
+};
+
&hdmi {
status = "okay";
};
@@ -132,8 +151,27 @@
status = "okay";
};
+&ohci0 {
+ status = "okay";
+};
+
&uart0 {
pinctrl-names = "default";
pinctrl-0 = <&uart0_pa_pins>;
status = "okay";
};
+
+&usb_otg {
+ /*
+ * According to schematics CN1 MicroUSB port can be used to take
+ * external 5V to power up the board VBUS. On the contrary CN1 MicroUSB
+ * port cannot provide power externally even if the board is powered
+ * via GPIO pins. It thus makes sense to force peripheral mode.
+ */
+ dr_mode = "peripheral";
+ status = "okay";
+};
+
+&usbphy {
+ status = "okay";
+};