cfi_flash: support of long cmd in U-boot.
Some NOR flash chips needs support of commands with length grether than max
value size of uchar. For example all M18 family chips use 0x1ff command in
buffered write mode as value of program loops count.
Signed-off-by: Alexey Korolev <akorolev@infradead.org>
Signed-off-by: Vasiliy Leonenko <vasiliy.leonenko@mail.ru>
diff --git a/drivers/mtd/cfi_flash.c b/drivers/mtd/cfi_flash.c
index 68ab55f..90cb966 100644
--- a/drivers/mtd/cfi_flash.c
+++ b/drivers/mtd/cfi_flash.c
@@ -298,17 +298,25 @@
/*-----------------------------------------------------------------------
* make a proper sized command based on the port and chip widths
*/
-static void flash_make_cmd (flash_info_t * info, uchar cmd, void *cmdbuf)
+static void flash_make_cmd (flash_info_t * info, ulong cmd, void *cmdbuf)
{
int i;
+ int cword_offset;
+ int cp_offset;
+ uchar val;
uchar *cp = (uchar *) cmdbuf;
+ for (i = info->portwidth; i > 0; i--){
+ cword_offset = (info->portwidth-i)%info->chipwidth;
#if defined(__LITTLE_ENDIAN) || defined(CFG_WRITE_SWAPPED_DATA)
- for (i = info->portwidth; i > 0; i--)
+ cp_offset = info->portwidth - i;
+ val = *((uchar*)&cmd + cword_offset);
#else
- for (i = 1; i <= info->portwidth; i++)
+ cp_offset = i - 1;
+ val = *((uchar*)&cmd + sizeof(ulong) - cword_offset - 1);
#endif
- *cp++ = (i & (info->chipwidth - 1)) ? '\0' : cmd;
+ cp[cp_offset] = (cword_offset >= sizeof(ulong)) ? 0x00 : val;
+ }
}
#ifdef DEBUG
@@ -422,7 +430,7 @@
* Write a proper sized command to the correct address
*/
static void flash_write_cmd (flash_info_t * info, flash_sect_t sect,
- uint offset, uchar cmd)
+ uint offset, ulong cmd)
{
void *addr;
@@ -911,7 +919,7 @@
/* reduce the number of loops by the width of
* the port */
cnt = len >> shift;
- flash_write_cmd (info, sector, 0, (uchar) cnt - 1);
+ flash_write_cmd (info, sector, 0, cnt - 1);
while (cnt-- > 0) {
switch (info->portwidth) {
case FLASH_CFI_8BIT:
@@ -953,7 +961,7 @@
#endif
flash_write_cmd(info, sector, offset, AMD_CMD_WRITE_TO_BUFFER);
cnt = len >> shift;
- flash_write_cmd(info, sector, offset, (uchar)cnt - 1);
+ flash_write_cmd(info, sector, offset, cnt - 1);
switch (info->portwidth) {
case FLASH_CFI_8BIT: