arch: arm: dts: an7581: Add eMMC nodes
Add eMMC nodes with the fixed regulator and fixed clock. It's also
needed to assign the clock and set it to 200MHz as it's set to 150Mhz by
default.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
diff --git a/arch/arm/dts/an7581-u-boot.dtsi b/arch/arm/dts/an7581-u-boot.dtsi
index a569044..46526ff 100644
--- a/arch/arm/dts/an7581-u-boot.dtsi
+++ b/arch/arm/dts/an7581-u-boot.dtsi
@@ -14,6 +14,21 @@
};
};
+ clk25m: oscillator {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <25000000>;
+ clock-output-names = "clkxtal";
+ };
+
+ vmmc_3v3: regulator-vmmc-3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "vmmc";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
soc {
chip_scu: syscon@1fa20000 {
compatible = "airoha,en7581-chip-scu", "syscon";
@@ -43,6 +58,24 @@
compatible = "airoha,en7581-switch";
reg = <0 0x1fb58000 0 0x8000>;
};
+
+ mmc0: mmc@1fa0e000 {
+ compatible = "mediatek,mt7622-mmc";
+ reg = <0x0 0x1fa0e000 0x0 0x1000>,
+ <0x0 0x1fa0c000 0x0 0x60>;
+ interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&scuclk EN7581_CLK_EMMC>, <&clk25m>;
+ clock-names = "source", "hclk";
+ bus-width = <4>;
+ max-frequency = <52000000>;
+ vmmc-supply = <&vmmc_3v3>;
+ disable-wp;
+ cap-mmc-highspeed;
+ non-removable;
+
+ assigned-clocks = <&scuclk EN7581_CLK_EMMC>;
+ assigned-clock-rates = <200000000>;
+ };
};
};