sunxi: video: Add support for using PORTD hsync/vsync pins with tcon1
Add support for using PORTD hsync/vsync pins with tcon1, this is a preparation
patch for adding native VGA support.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Ian Campbell <ijc@hellion.org.uk>
diff --git a/drivers/video/sunxi_display.c b/drivers/video/sunxi_display.c
index bb18fe2..eda04f7 100644
--- a/drivers/video/sunxi_display.c
+++ b/drivers/video/sunxi_display.c
@@ -572,11 +572,12 @@
#ifdef CONFIG_VIDEO_HDMI
static void sunxi_lcdc_tcon1_mode_set(const struct ctfb_res_modes *mode,
- int *clk_div, int *clk_double)
+ int *clk_div, int *clk_double,
+ bool use_portd_hvsync)
{
struct sunxi_lcdc_reg * const lcdc =
(struct sunxi_lcdc_reg *)SUNXI_LCD0_BASE;
- int bp, clk_delay, total;
+ int bp, clk_delay, total, val;
/* Use tcon1 */
clrsetbits_le32(&lcdc->ctrl, SUNXI_LCDC_CTRL_IO_MAP_MASK,
@@ -606,6 +607,21 @@
writel(SUNXI_LCDC_X(mode->hsync_len) | SUNXI_LCDC_Y(mode->vsync_len),
&lcdc->tcon1_timing_sync);
+ if (use_portd_hvsync) {
+ sunxi_gpio_set_cfgpin(SUNXI_GPD(26), SUNXI_GPD0_LCD0);
+ sunxi_gpio_set_cfgpin(SUNXI_GPD(27), SUNXI_GPD0_LCD0);
+
+ val = 0;
+ if (mode->sync & FB_SYNC_HOR_HIGH_ACT)
+ val |= SUNXI_LCDC_TCON_HSYNC_MASK;
+ if (mode->sync & FB_SYNC_VERT_HIGH_ACT)
+ val |= SUNXI_LCDC_TCON_VSYNC_MASK;
+ writel(val, &lcdc->tcon1_io_polarity);
+
+ clrbits_le32(&lcdc->tcon1_io_tristate,
+ SUNXI_LCDC_TCON_VSYNC_MASK |
+ SUNXI_LCDC_TCON_HSYNC_MASK);
+ }
sunxi_lcdc_pll_set(1, mode->pixclock_khz, clk_div, clk_double);
}
@@ -749,7 +765,7 @@
#ifdef CONFIG_VIDEO_HDMI
int clk_div, clk_double;
sunxi_composer_mode_set(mode, address);
- sunxi_lcdc_tcon1_mode_set(mode, &clk_div, &clk_double);
+ sunxi_lcdc_tcon1_mode_set(mode, &clk_div, &clk_double, 0);
sunxi_hdmi_mode_set(mode, clk_div, clk_double);
sunxi_composer_enable();
sunxi_lcdc_enable();