timer: Add Cadence TTC timer counter support
This driver was tested on Xilinx ZynqMP SoC.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
diff --git a/drivers/timer/Kconfig b/drivers/timer/Kconfig
index 2c96896..8a31397 100644
--- a/drivers/timer/Kconfig
+++ b/drivers/timer/Kconfig
@@ -52,6 +52,13 @@
it is designed to offer maximum accuracy and efficient management,
even for systems with long response time.
+config CADENCE_TTC_TIMER
+ bool "Cadence TTC (Triple Timer Counter)"
+ depends on TIMER
+ help
+ Enables support for the cadence ttc driver. This driver is present
+ on Xilinx Zynq and ZynqMP SoCs.
+
config SANDBOX_TIMER
bool "Sandbox timer support"
depends on SANDBOX && TIMER
diff --git a/drivers/timer/Makefile b/drivers/timer/Makefile
index a8b531a..ee2fcb1 100644
--- a/drivers/timer/Makefile
+++ b/drivers/timer/Makefile
@@ -4,6 +4,7 @@
obj-y += timer-uclass.o
obj-$(CONFIG_ALTERA_TIMER) += altera_timer.o
+obj-$(CONFIG_CADENCE_TTC_TIMER) += cadence-ttc.o
obj-$(CONFIG_SANDBOX_TIMER) += sandbox_timer.o
obj-$(CONFIG_X86_TSC_TIMER) += tsc_timer.o
obj-$(CONFIG_OMAP_TIMER) += omap-timer.o
diff --git a/drivers/timer/cadence-ttc.c b/drivers/timer/cadence-ttc.c
new file mode 100644
index 0000000..5b91c8a
--- /dev/null
+++ b/drivers/timer/cadence-ttc.c
@@ -0,0 +1,91 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2018 Xilinx, Inc. (Michal Simek)
+ */
+
+#include <common.h>
+#include <dm.h>
+#include <errno.h>
+#include <timer.h>
+#include <asm/io.h>
+
+#define CNT_CNTRL_RESET BIT(4)
+
+struct cadence_ttc_regs {
+ u32 clk_cntrl1; /* 0x0 - Clock Control 1 */
+ u32 clk_cntrl2; /* 0x4 - Clock Control 2 */
+ u32 clk_cntrl3; /* 0x8 - Clock Control 3 */
+ u32 counter_cntrl1; /* 0xC - Counter Control 1 */
+ u32 counter_cntrl2; /* 0x10 - Counter Control 2 */
+ u32 counter_cntrl3; /* 0x14 - Counter Control 3 */
+ u32 counter_val1; /* 0x18 - Counter Control 1 */
+ u32 counter_val2; /* 0x1C - Counter Control 2 */
+ u32 counter_val3; /* 0x20 - Counter Control 3 */
+ u32 reserved[15];
+ u32 interrupt_enable1; /* 0x60 - Interrupt Enable 1 */
+ u32 interrupt_enable2; /* 0x64 - Interrupt Enable 2 */
+ u32 interrupt_enable3; /* 0x68 - Interrupt Enable 3 */
+};
+
+struct cadence_ttc_priv {
+ struct cadence_ttc_regs *regs;
+};
+
+static int cadence_ttc_get_count(struct udevice *dev, u64 *count)
+{
+ struct cadence_ttc_priv *priv = dev_get_priv(dev);
+
+ *count = readl(&priv->regs->counter_val1);
+
+ return 0;
+}
+
+static int cadence_ttc_probe(struct udevice *dev)
+{
+ struct cadence_ttc_priv *priv = dev_get_priv(dev);
+
+ /* Disable interrupts for sure */
+ writel(0, &priv->regs->interrupt_enable1);
+ writel(0, &priv->regs->interrupt_enable2);
+ writel(0, &priv->regs->interrupt_enable3);
+
+ /* Make sure that clocks are configured properly without prescaller */
+ writel(0, &priv->regs->clk_cntrl1);
+ writel(0, &priv->regs->clk_cntrl2);
+ writel(0, &priv->regs->clk_cntrl3);
+
+ /* Reset and enable this counter */
+ writel(CNT_CNTRL_RESET, &priv->regs->counter_cntrl1);
+
+ return 0;
+}
+
+static int cadence_ttc_ofdata_to_platdata(struct udevice *dev)
+{
+ struct cadence_ttc_priv *priv = dev_get_priv(dev);
+
+ priv->regs = map_physmem(devfdt_get_addr(dev),
+ sizeof(struct cadence_ttc_regs), MAP_NOCACHE);
+
+ return 0;
+}
+
+static const struct timer_ops cadence_ttc_ops = {
+ .get_count = cadence_ttc_get_count,
+};
+
+static const struct udevice_id cadence_ttc_ids[] = {
+ { .compatible = "cdns,ttc" },
+ {}
+};
+
+U_BOOT_DRIVER(cadence_ttc) = {
+ .name = "cadence_ttc",
+ .id = UCLASS_TIMER,
+ .of_match = cadence_ttc_ids,
+ .ofdata_to_platdata = cadence_ttc_ofdata_to_platdata,
+ .priv_auto_alloc_size = sizeof(struct cadence_ttc_priv),
+ .probe = cadence_ttc_probe,
+ .ops = &cadence_ttc_ops,
+ .flags = DM_FLAG_PRE_RELOC,
+};