cm-t54: add cm-t54 board support
Add cm-t54 board directory, config file. Enable build.
Basic support includes:
Serial console
SD/MMC
eMMC
USB
Ethernet
Signed-off-by: Dmitry Lifshitz <lifshitz@compulab.co.il>
Acked-by: Igor Grinberg <grinberg@compulab.co.il>
diff --git a/board/compulab/cm_t54/mux.c b/board/compulab/cm_t54/mux.c
new file mode 100644
index 0000000..da35383
--- /dev/null
+++ b/board/compulab/cm_t54/mux.c
@@ -0,0 +1,94 @@
+/*
+ * Pinmux configuration for Compulab CM-T54 board
+ *
+ * Copyright (C) 2014, Compulab Ltd - http://compulab.co.il/
+ *
+ * Author: Dmitry Lifshitz <lifshitz@compulab.co.il>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef _CM_T54_MUX_DATA_H
+#define _CM_T54_MUX_DATA_H
+
+#include <asm/arch/mux_omap5.h>
+#include <asm/arch/sys_proto.h>
+
+const struct pad_conf_entry core_padconf_array_essential[] = {
+ /* MMC1 - SD CARD */
+ {SDCARD_CLK, (PTU | IEN | M0)}, /* SDCARD_CLK */
+ {SDCARD_CMD, (PTU | IEN | M0)}, /* SDCARD_CMD */
+ {SDCARD_DATA0, (PTU | IEN | M0)}, /* SDCARD_DATA0 */
+ {SDCARD_DATA1, (PTU | IEN | M0)}, /* SDCARD_DATA1 */
+ {SDCARD_DATA2, (PTU | IEN | M0)}, /* SDCARD_DATA2 */
+ {SDCARD_DATA3, (PTU | IEN | M0)}, /* SDCARD_DATA3 */
+
+ /* SD CARD CD and WP GPIOs*/
+ {TIMER5_PWM_EVT, (PTU | IEN | M6)}, /* GPIO8_228 */
+ {TIMER6_PWM_EVT, (PTU | IEN | M6)}, /* GPIO8_229 */
+
+ /* MMC2 - eMMC */
+ {EMMC_CLK, (PTU | IEN | M0)}, /* EMMC_CLK */
+ {EMMC_CMD, (PTU | IEN | M0)}, /* EMMC_CMD */
+ {EMMC_DATA0, (PTU | IEN | M0)}, /* EMMC_DATA0 */
+ {EMMC_DATA1, (PTU | IEN | M0)}, /* EMMC_DATA1 */
+ {EMMC_DATA2, (PTU | IEN | M0)}, /* EMMC_DATA2 */
+ {EMMC_DATA3, (PTU | IEN | M0)}, /* EMMC_DATA3 */
+ {EMMC_DATA4, (PTU | IEN | M0)}, /* EMMC_DATA4 */
+ {EMMC_DATA5, (PTU | IEN | M0)}, /* EMMC_DATA5 */
+ {EMMC_DATA6, (PTU | IEN | M0)}, /* EMMC_DATA6 */
+ {EMMC_DATA7, (PTU | IEN | M0)}, /* EMMC_DATA7 */
+
+ /* UART4 */
+ {I2C5_SCL, (PTU | IEN | M2)}, /* UART4_RX */
+ {I2C5_SDA, (M2)}, /* UART4_TX */
+
+ /* Led */
+ {HSI2_CAFLAG, (PTU | M6)}, /* GPIO3_80 */
+
+ /* I2C1 */
+ {I2C1_PMIC_SCL, (PTU | IEN | M0)}, /* I2C1_PMIC_SCL */
+ {I2C1_PMIC_SDA, (PTU | IEN | M0)}, /* I2C1_PMIC_SDA */
+
+ /* USBB2, USBB3 */
+ {USBB2_HSIC_STROBE, (PTU | IEN | M0)}, /* USBB2_HSIC_STROBE */
+ {USBB2_HSIC_DATA, (PTU | IEN | M0)}, /* USBB2_HSIC_DATA */
+ {USBB3_HSIC_STROBE, (PTU | IEN | M0)}, /* USBB3_HSIC_STROBE */
+ {USBB3_HSIC_DATA, (PTU | IEN | M0)}, /* USBB3_HSIC_DATA */
+
+ /* USB Hub and USB Eth reset GPIOs */
+ {HSI2_CAREADY, (PTD | M6)}, /* GPIO3_76 */
+ {HSI2_ACDATA, (PTD | M6)}, /* GPIO3_83 */
+
+ /* I2C4 */
+ {I2C4_SCL, (PTU | IEN | M0)}, /* I2C4_SCL */
+ {I2C4_SDA, (PTU | IEN | M0)}, /* I2C4_SDA */
+};
+
+const struct pad_conf_entry wkup_padconf_array_essential[] = {
+ {SR_PMIC_SCL, (PTU | IEN | M0)}, /* SR_PMIC_SCL */
+ {SR_PMIC_SDA, (PTU | IEN | M0)}, /* SR_PMIC_SDA */
+ {SYS_32K, (IEN | M0)}, /* SYS_32K */
+
+ /* USB Hub clock */
+ {FREF_CLK1_OUT, (PTD | IEN | M0)}, /* FREF_CLK1_OUT */
+};
+
+/*
+ * Routine: set_muxconf_regs_essential
+ * Description: setup board pinmux configuration.
+ */
+void set_muxconf_regs_essential(void)
+{
+ do_set_mux((*ctrl)->control_padconf_core_base,
+ core_padconf_array_essential,
+ sizeof(core_padconf_array_essential) /
+ sizeof(struct pad_conf_entry));
+
+ do_set_mux((*ctrl)->control_padconf_wkup_base,
+ wkup_padconf_array_essential,
+ sizeof(wkup_padconf_array_essential) /
+ sizeof(struct pad_conf_entry));
+}
+
+#endif /* _CM_T54_MUX_DATA_H */