treewide: use linux/time.h for time conversion defines
Now that we have time conversion defines from in time.h there is no need
for each driver to define their own version.
Signed-off-by: Igor Prusov <ivprusov@salutedevices.com>
Reviewed-by: Svyatoslav Ryhel <clamor95@gmail.com> # tegra
Reviewed-by: Eugen Hristev <eugen.hristev@collabora.com> #at91
Reviewed-by: Caleb Connolly <caleb.connolly@linaro.org> #qcom geni
Reviewed-by: Stefan Bosch <stefan_b@posteo.net> #nanopi2
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
diff --git a/drivers/phy/meson-axg-mipi-dphy.c b/drivers/phy/meson-axg-mipi-dphy.c
index cf2a1cd..a69b6c9 100644
--- a/drivers/phy/meson-axg-mipi-dphy.c
+++ b/drivers/phy/meson-axg-mipi-dphy.c
@@ -25,6 +25,7 @@
#include <linux/bitops.h>
#include <linux/compat.h>
#include <linux/bitfield.h>
+#include <linux/time.h>
/* [31] soft reset for the phy.
* 1: reset. 0: dessert the reset.
@@ -170,8 +171,6 @@
#define MIPI_DSI_TEST_CTRL0 0x3c
#define MIPI_DSI_TEST_CTRL1 0x40
-#define NSEC_PER_MSEC 1000000L
-
struct phy_meson_axg_mipi_dphy_priv {
struct regmap *regmap;
#if CONFIG_IS_ENABLED(CLK)
diff --git a/drivers/phy/phy-core-mipi-dphy.c b/drivers/phy/phy-core-mipi-dphy.c
index ba5f648..bb61816 100644
--- a/drivers/phy/phy-core-mipi-dphy.c
+++ b/drivers/phy/phy-core-mipi-dphy.c
@@ -6,11 +6,10 @@
#include <common.h>
#include <div64.h>
+#include <linux/time.h>
#include <phy-mipi-dphy.h>
-#define PSEC_PER_SEC 1000000000000LL
-
/*
* Minimum D-PHY timings based on MIPI D-PHY specification. Derived
* from the valid ranges specified in Section 6.9, Table 14, Page 41
diff --git a/drivers/phy/rockchip/phy-rockchip-inno-dsidphy.c b/drivers/phy/rockchip/phy-rockchip-inno-dsidphy.c
index 9ed7af0..5be76e0 100644
--- a/drivers/phy/rockchip/phy-rockchip-inno-dsidphy.c
+++ b/drivers/phy/rockchip/phy-rockchip-inno-dsidphy.c
@@ -15,6 +15,7 @@
#include <linux/clk-provider.h>
#include <linux/delay.h>
#include <linux/math64.h>
+#include <linux/time.h>
#include <phy-mipi-dphy.h>
#include <reset.h>
@@ -186,8 +187,6 @@
#define DSI_PHY_STATUS 0xb0
#define PHY_LOCK BIT(0)
-#define PSEC_PER_SEC 1000000000000LL
-
#define msleep(a) udelay(a * 1000)
enum phy_max_rate {