| // SPDX-License-Identifier: GPL-2.0+ |
| /* |
| * Copyright 2013 Freescale Semiconductor, Inc. |
| */ |
| |
| #include <common.h> |
| #include <clock_legacy.h> |
| #include <console.h> |
| #include <env.h> |
| #include <env_internal.h> |
| #include <init.h> |
| #include <ns16550.h> |
| #include <malloc.h> |
| #include <mmc.h> |
| #include <nand.h> |
| #include <i2c.h> |
| #include <fsl_esdhc.h> |
| #include <spi_flash.h> |
| #include <asm/global_data.h> |
| #include "../common/spl.h" |
| |
| DECLARE_GLOBAL_DATA_PTR; |
| |
| phys_size_t get_effective_memsize(void) |
| { |
| return CONFIG_SYS_L2_SIZE; |
| } |
| |
| void board_init_f(ulong bootflag) |
| { |
| u32 plat_ratio, bus_clk; |
| ccsr_gur_t *gur = (void *)CONFIG_SYS_MPC85xx_GUTS_ADDR; |
| |
| console_init_f(); |
| |
| /* Set pmuxcr to allow both i2c1 and i2c2 */ |
| setbits_be32(&gur->pmuxcr, in_be32(&gur->pmuxcr) | 0x1000); |
| setbits_be32(&gur->pmuxcr, |
| in_be32(&gur->pmuxcr) | MPC85xx_PMUXCR_SD_DATA); |
| |
| /* Read back the register to synchronize the write. */ |
| in_be32(&gur->pmuxcr); |
| |
| #ifdef CONFIG_SPL_SPI_BOOT |
| clrbits_be32(&gur->pmuxcr, MPC85xx_PMUXCR_SD_DATA); |
| #endif |
| |
| /* initialize selected port with appropriate baud rate */ |
| plat_ratio = in_be32(&gur->porpllsr) & MPC85xx_PORPLLSR_PLAT_RATIO; |
| plat_ratio >>= 1; |
| bus_clk = CONFIG_SYS_CLK_FREQ * plat_ratio; |
| gd->bus_clk = bus_clk; |
| |
| ns16550_init((struct ns16550 *)CONFIG_SYS_NS16550_COM1, |
| bus_clk / 16 / CONFIG_BAUDRATE); |
| #ifdef CONFIG_SPL_MMC_BOOT |
| puts("\nSD boot...\n"); |
| #elif defined(CONFIG_SPL_SPI_BOOT) |
| puts("\nSPI Flash boot...\n"); |
| #endif |
| |
| /* copy code to RAM and jump to it - this should not return */ |
| /* NOTE - code has to be copied out of NAND buffer before |
| * other blocks can be read. |
| */ |
| relocate_code(CONFIG_SPL_RELOC_STACK, 0, CONFIG_SPL_RELOC_TEXT_BASE); |
| } |
| |
| void board_init_r(gd_t *gd, ulong dest_addr) |
| { |
| /* Pointer is writable since we allocated a register for it */ |
| gd = (gd_t *)CONFIG_SPL_GD_ADDR; |
| struct bd_info *bd; |
| |
| memset(gd, 0, sizeof(gd_t)); |
| bd = (struct bd_info *)(CONFIG_SPL_GD_ADDR + sizeof(gd_t)); |
| memset(bd, 0, sizeof(struct bd_info)); |
| gd->bd = bd; |
| |
| arch_cpu_init(); |
| get_clocks(); |
| mem_malloc_init(CONFIG_SPL_RELOC_MALLOC_ADDR, |
| CONFIG_SPL_RELOC_MALLOC_SIZE); |
| gd->flags |= GD_FLG_FULL_MALLOC_INIT; |
| |
| #ifndef CONFIG_SPL_NAND_BOOT |
| env_init(); |
| #endif |
| #ifdef CONFIG_SPL_MMC_BOOT |
| mmc_initialize(bd); |
| #endif |
| /* relocate environment function pointers etc. */ |
| #ifdef CONFIG_SPL_NAND_BOOT |
| nand_spl_load_image(CONFIG_ENV_OFFSET, CONFIG_ENV_SIZE, |
| (uchar *)SPL_ENV_ADDR); |
| gd->env_addr = (ulong)(SPL_ENV_ADDR); |
| gd->env_valid = ENV_VALID; |
| #else |
| env_relocate(); |
| #endif |
| |
| #ifdef CONFIG_SYS_I2C |
| i2c_init_all(); |
| #else |
| i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE); |
| #endif |
| |
| dram_init(); |
| #ifdef CONFIG_SPL_NAND_BOOT |
| puts("Tertiary program loader running in sram..."); |
| #else |
| puts("Second program loader running in sram...\n"); |
| #endif |
| |
| #ifdef CONFIG_SPL_MMC_BOOT |
| mmc_boot(); |
| #elif defined(CONFIG_SPL_SPI_BOOT) |
| fsl_spi_boot(); |
| #elif defined(CONFIG_SPL_NAND_BOOT) |
| nand_boot(); |
| #endif |
| } |