board: nuvoton: update console environment variable
If CONFIG_SYS_SKIP_UART_INIT is enabled, calculate the
current baud rate and update the "console" environment
variable.
Signed-off-by: Jim Liu <JJLIU0@nuvoton.com>
diff --git a/board/nuvoton/arbel_evb/Kconfig b/board/nuvoton/arbel_evb/Kconfig
index 33c589f..ed1c1ad 100644
--- a/board/nuvoton/arbel_evb/Kconfig
+++ b/board/nuvoton/arbel_evb/Kconfig
@@ -15,4 +15,5 @@
help
Reserve memory for ECC/GFX/OPTEE/TIP/CP.
+source "board/nuvoton/common/Kconfig"
endif
diff --git a/board/nuvoton/arbel_evb/arbel_evb.c b/board/nuvoton/arbel_evb/arbel_evb.c
index 59e1a42..8fc56c1 100644
--- a/board/nuvoton/arbel_evb/arbel_evb.c
+++ b/board/nuvoton/arbel_evb/arbel_evb.c
@@ -7,6 +7,7 @@
#include <dm.h>
#include <asm/io.h>
#include <asm/arch/gcr.h>
+#include "../common/uart.h"
#define SR_MII_CTRL_SWR_BIT15 15
@@ -90,3 +91,9 @@
return 0;
}
+int last_stage_init(void)
+{
+ board_set_console();
+
+ return 0;
+}
diff --git a/board/nuvoton/common/Kconfig b/board/nuvoton/common/Kconfig
new file mode 100644
index 0000000..61de7bc
--- /dev/null
+++ b/board/nuvoton/common/Kconfig
@@ -0,0 +1,9 @@
+if ARCH_NPCM
+
+config SYS_SKIP_UART_INIT
+ bool "Skip UART initialization"
+ depends on NPCM_SERIAL
+ help
+ Select this if the UART you want to use is already
+ initialized by the time U-Boot starts its execution.
+endif
diff --git a/board/nuvoton/common/Makefile b/board/nuvoton/common/Makefile
new file mode 100644
index 0000000..8fd83b2
--- /dev/null
+++ b/board/nuvoton/common/Makefile
@@ -0,0 +1 @@
+obj-$(CONFIG_SYS_SKIP_UART_INIT) += uart.o
diff --git a/board/nuvoton/common/uart.c b/board/nuvoton/common/uart.c
new file mode 100644
index 0000000..b35c795
--- /dev/null
+++ b/board/nuvoton/common/uart.c
@@ -0,0 +1,70 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (c) 2023 Nuvoton Technology Corp.
+ */
+
+#include <clk.h>
+#include <dm.h>
+#include <env.h>
+#include <serial.h>
+#include <linux/delay.h>
+
+#define UART_DLL 0x0
+#define UART_DLM 0x4
+#define UART_LCR 0xc
+#define LCR_DLAB BIT(7)
+
+void board_set_console(void)
+{
+ const unsigned long baudrate_table[] = CFG_SYS_BAUDRATE_TABLE;
+ struct udevice *dev = gd->cur_serial_dev;
+ unsigned int baudrate, max_delta;
+ void __iomem *uart_reg;
+ struct clk clk;
+ char string[32];
+ u32 uart_clk;
+ u8 dll, dlm;
+ u16 divisor;
+ int ret, i;
+
+ if (!dev)
+ return;
+
+ uart_reg = dev_read_addr_ptr(dev);
+ ret = clk_get_by_index(dev, 0, &clk);
+ if (ret)
+ return;
+
+ uart_clk = clk_get_rate(&clk);
+ setbits_8(uart_reg + UART_LCR, LCR_DLAB);
+ dll = readb(uart_reg + UART_DLL);
+ dlm = readb(uart_reg + UART_DLM);
+ clrbits_8(uart_reg + UART_LCR, LCR_DLAB);
+ divisor = dll | (dlm << 8);
+ baudrate = uart_clk / ((16 * (divisor + 2)));
+ for (i = 0; i < ARRAY_SIZE(baudrate_table); ++i) {
+ max_delta = baudrate_table[i] / 20;
+ if (abs(baudrate - baudrate_table[i]) < max_delta) {
+ /* The baudrate is supported */
+ gd->baudrate = baudrate_table[i];
+ break;
+ }
+ }
+
+ if (i == ARRAY_SIZE(baudrate_table)) {
+ /* current baudrate is not suitable, set to default */
+ divisor = DIV_ROUND_CLOSEST(uart_clk, 16 * gd->baudrate) - 2;
+ setbits_8(uart_reg + UART_LCR, LCR_DLAB);
+ writeb(divisor & 0xff, uart_reg + UART_DLL);
+ writeb(divisor >> 8, uart_reg + UART_DLM);
+ clrbits_8(uart_reg + UART_LCR, LCR_DLAB);
+ udelay(100);
+ printf("\r\nUART(source %u): change baudrate from %u to %u\n",
+ uart_clk, baudrate, uart_clk / ((16 * (divisor + 2))));
+ }
+
+ debug("Set env baudrate=%u\n", gd->baudrate);
+ snprintf(string, sizeof(string), "ttyS0,%un8", gd->baudrate);
+ env_set("console", string);
+
+}
diff --git a/board/nuvoton/common/uart.h b/board/nuvoton/common/uart.h
new file mode 100644
index 0000000..9cc8952
--- /dev/null
+++ b/board/nuvoton/common/uart.h
@@ -0,0 +1,11 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (c) 2023 Nuvoton Technology Corp.
+ */
+
+#ifndef _NUVOTON_UART_H
+#define _NUVOTON_UART_H
+
+void board_set_console(void);
+
+#endif /* _NUVOTON_COMMON_H */
diff --git a/board/nuvoton/poleg_evb/Kconfig b/board/nuvoton/poleg_evb/Kconfig
index d3f4c1d..6f7f1ef 100644
--- a/board/nuvoton/poleg_evb/Kconfig
+++ b/board/nuvoton/poleg_evb/Kconfig
@@ -22,4 +22,5 @@
endchoice
+source "board/nuvoton/common/Kconfig"
endif
diff --git a/board/nuvoton/poleg_evb/poleg_evb.c b/board/nuvoton/poleg_evb/poleg_evb.c
index 2052af6..7421911 100644
--- a/board/nuvoton/poleg_evb/poleg_evb.c
+++ b/board/nuvoton/poleg_evb/poleg_evb.c
@@ -10,6 +10,7 @@
#include <asm/io.h>
#include <asm/arch/gcr.h>
#include <asm/mach-types.h>
+#include "../common/uart.h"
DECLARE_GLOBAL_DATA_PTR;
@@ -53,3 +54,10 @@
return 0;
}
+
+int last_stage_init(void)
+{
+ board_set_console();
+
+ return 0;
+}