rockchip: pinctrl: Add rk322x gmac pinctrl support
Set gmac pins iomux and rgmii tx pins to 12ma drive-strength,
clean others to 2ma.
Signed-off-by: David Wu <david.wu@rock-chips.com>
Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
diff --git a/drivers/pinctrl/rockchip/pinctrl_rk322x.c b/drivers/pinctrl/rockchip/pinctrl_rk322x.c
index 28d9996..354fea2 100644
--- a/drivers/pinctrl/rockchip/pinctrl_rk322x.c
+++ b/drivers/pinctrl/rockchip/pinctrl_rk322x.c
@@ -470,6 +470,56 @@
CON_IOMUX_PWM0SEL_MASK = 1 << CON_IOMUX_PWM0SEL_SHIFT,
};
+/* GRF_GPIO2B_E */
+enum {
+ GRF_GPIO2B0_E_SHIFT = 0,
+ GRF_GPIO2B0_E_MASK = 3 << GRF_GPIO2B0_E_SHIFT,
+ GRF_GPIO2B1_E_SHIFT = 2,
+ GRF_GPIO2B1_E_MASK = 3 << GRF_GPIO2B1_E_SHIFT,
+ GRF_GPIO2B3_E_SHIFT = 6,
+ GRF_GPIO2B3_E_MASK = 3 << GRF_GPIO2B3_E_SHIFT,
+ GRF_GPIO2B4_E_SHIFT = 8,
+ GRF_GPIO2B4_E_MASK = 3 << GRF_GPIO2B4_E_SHIFT,
+ GRF_GPIO2B5_E_SHIFT = 10,
+ GRF_GPIO2B5_E_MASK = 3 << GRF_GPIO2B5_E_SHIFT,
+ GRF_GPIO2B6_E_SHIFT = 12,
+ GRF_GPIO2B6_E_MASK = 3 << GRF_GPIO2B6_E_SHIFT,
+};
+
+/* GRF_GPIO2C_E */
+enum {
+ GRF_GPIO2C0_E_SHIFT = 0,
+ GRF_GPIO2C0_E_MASK = 3 << GRF_GPIO2C0_E_SHIFT,
+ GRF_GPIO2C1_E_SHIFT = 2,
+ GRF_GPIO2C1_E_MASK = 3 << GRF_GPIO2C1_E_SHIFT,
+ GRF_GPIO2C2_E_SHIFT = 4,
+ GRF_GPIO2C2_E_MASK = 3 << GRF_GPIO2C2_E_SHIFT,
+ GRF_GPIO2C3_E_SHIFT = 6,
+ GRF_GPIO2C3_E_MASK = 3 << GRF_GPIO2C3_E_SHIFT,
+ GRF_GPIO2C4_E_SHIFT = 8,
+ GRF_GPIO2C4_E_MASK = 3 << GRF_GPIO2C4_E_SHIFT,
+ GRF_GPIO2C5_E_SHIFT = 10,
+ GRF_GPIO2C5_E_MASK = 3 << GRF_GPIO2C5_E_SHIFT,
+ GRF_GPIO2C6_E_SHIFT = 12,
+ GRF_GPIO2C6_E_MASK = 3 << GRF_GPIO2C6_E_SHIFT,
+ GRF_GPIO2C7_E_SHIFT = 14,
+ GRF_GPIO2C7_E_MASK = 3 << GRF_GPIO2C7_E_SHIFT,
+};
+
+/* GRF_GPIO2D_E */
+enum {
+ GRF_GPIO2D1_E_SHIFT = 2,
+ GRF_GPIO2D1_E_MASK = 3 << GRF_GPIO2D1_E_SHIFT,
+};
+
+/* GPIO Bias drive strength settings */
+enum GPIO_BIAS {
+ GPIO_BIAS_2MA = 0,
+ GPIO_BIAS_4MA,
+ GPIO_BIAS_8MA,
+ GPIO_BIAS_12MA,
+};
+
struct rk322x_pinctrl_priv {
struct rk322x_grf *grf;
};
@@ -632,6 +682,95 @@
break;
}
}
+
+#if CONFIG_IS_ENABLED(GMAC_ROCKCHIP)
+static void pinctrl_rk322x_gmac_config(struct rk322x_grf *grf, int gmac_id)
+{
+ switch (gmac_id) {
+ case PERIPH_ID_GMAC:
+ /* set rgmii pins mux */
+ rk_clrsetreg(&grf->gpio2b_iomux,
+ GPIO2B0_MASK |
+ GPIO2B1_MASK |
+ GPIO2B3_MASK |
+ GPIO2B4_MASK |
+ GPIO2B5_MASK |
+ GPIO2B6_MASK,
+ GPIO2B0_GMAC_RXDV << GPIO2B0_SHIFT |
+ GPIO2B1_GMAC_TXCLK << GPIO2B1_SHIFT |
+ GPIO2B3_GMAC_RXCLK << GPIO2B3_SHIFT |
+ GPIO2B4_GMAC_MDIO << GPIO2B4_SHIFT |
+ GPIO2B5_GMAC_TXEN << GPIO2B5_SHIFT |
+ GPIO2B6_GMAC_CLK << GPIO2B6_SHIFT);
+
+ rk_clrsetreg(&grf->gpio2c_iomux,
+ GPIO2C0_MASK |
+ GPIO2C1_MASK |
+ GPIO2C2_MASK |
+ GPIO2C3_MASK |
+ GPIO2C4_MASK |
+ GPIO2C5_MASK |
+ GPIO2C6_MASK |
+ GPIO2C7_MASK,
+ GPIO2C0_GMAC_RXD1 << GPIO2C0_SHIFT |
+ GPIO2C1_GMAC_RXD0 << GPIO2C1_SHIFT |
+ GPIO2C2_GMAC_TXD1 << GPIO2C2_SHIFT |
+ GPIO2C3_GMAC_TXD0 << GPIO2C3_SHIFT |
+ GPIO2C4_GMAC_RXD3 << GPIO2C4_SHIFT |
+ GPIO2C5_GMAC_RXD2 << GPIO2C5_SHIFT |
+ GPIO2C6_GMAC_TXD2 << GPIO2C6_SHIFT |
+ GPIO2C7_GMAC_TXD3 << GPIO2C7_SHIFT);
+
+ rk_clrsetreg(&grf->gpio2d_iomux,
+ GPIO2D1_MASK,
+ GPIO2D1_GMAC_MDC << GPIO2D1_SHIFT);
+
+ /*
+ * set rgmii tx pins to 12ma drive-strength,
+ * clean others with 2ma.
+ */
+ rk_clrsetreg(&grf->gpio2_e[1],
+ GRF_GPIO2B0_E_MASK |
+ GRF_GPIO2B1_E_MASK |
+ GRF_GPIO2B3_E_MASK |
+ GRF_GPIO2B4_E_MASK |
+ GRF_GPIO2B5_E_MASK |
+ GRF_GPIO2B6_E_MASK,
+ GPIO_BIAS_2MA << GRF_GPIO2B0_E_SHIFT |
+ GPIO_BIAS_12MA << GRF_GPIO2B1_E_SHIFT |
+ GPIO_BIAS_2MA << GRF_GPIO2B3_E_SHIFT |
+ GPIO_BIAS_2MA << GRF_GPIO2B4_E_SHIFT |
+ GPIO_BIAS_12MA << GRF_GPIO2B5_E_SHIFT |
+ GPIO_BIAS_2MA << GRF_GPIO2B6_E_SHIFT);
+
+ rk_clrsetreg(&grf->gpio2_e[2],
+ GRF_GPIO2C0_E_MASK |
+ GRF_GPIO2C1_E_MASK |
+ GRF_GPIO2C2_E_MASK |
+ GRF_GPIO2C3_E_MASK |
+ GRF_GPIO2C4_E_MASK |
+ GRF_GPIO2C5_E_MASK |
+ GRF_GPIO2C6_E_MASK |
+ GRF_GPIO2C7_E_MASK,
+ GPIO_BIAS_2MA << GRF_GPIO2C0_E_SHIFT |
+ GPIO_BIAS_2MA << GRF_GPIO2C1_E_SHIFT |
+ GPIO_BIAS_12MA << GRF_GPIO2C2_E_SHIFT |
+ GPIO_BIAS_12MA << GRF_GPIO2C3_E_SHIFT |
+ GPIO_BIAS_2MA << GRF_GPIO2C4_E_SHIFT |
+ GPIO_BIAS_2MA << GRF_GPIO2C5_E_SHIFT |
+ GPIO_BIAS_12MA << GRF_GPIO2C6_E_SHIFT |
+ GPIO_BIAS_12MA << GRF_GPIO2C7_E_SHIFT);
+
+ rk_clrsetreg(&grf->gpio2_e[3],
+ GRF_GPIO2D1_E_MASK,
+ GPIO_BIAS_2MA << GRF_GPIO2D1_E_SHIFT);
+ break;
+ default:
+ debug("gmac id = %d iomux error!\n", gmac_id);
+ break;
+ }
+}
+#endif
static int rk322x_pinctrl_request(struct udevice *dev, int func, int flags)
{
@@ -662,6 +801,11 @@
case PERIPH_ID_SDMMC1:
pinctrl_rk322x_sdmmc_config(priv->grf, func);
break;
+#if CONFIG_IS_ENABLED(GMAC_ROCKCHIP)
+ case PERIPH_ID_GMAC:
+ pinctrl_rk322x_gmac_config(priv->grf, func);
+ break;
+#endif
default:
return -EINVAL;
}
@@ -701,6 +845,10 @@
return PERIPH_ID_UART1;
case 57:
return PERIPH_ID_UART2;
+#if CONFIG_IS_ENABLED(GMAC_ROCKCHIP)
+ case 24:
+ return PERIPH_ID_GMAC;
+#endif
}
return -ENOENT;
}