Enable Ethernet for Nomadik 8815 Evaluation Kit
This trivially enables Ethernet support in the debug board
by setting up the proper chip select.
Signed-off-by: Alessandro Rubini <rubini@unipv.it>
Acked-by: Andrea Gallo <andrea.gallo@stnwireless.com>
diff --git a/board/st/nmdk8815/nmdk8815.c b/board/st/nmdk8815/nmdk8815.c
index c54eac1..edf4626 100644
--- a/board/st/nmdk8815/nmdk8815.c
+++ b/board/st/nmdk8815/nmdk8815.c
@@ -49,8 +49,11 @@
writel(0x00000000, NOMADIK_GPIO1_BASE + 0x28);
writel(readl(NOMADIK_SRC_BASE) | 0x8000, NOMADIK_SRC_BASE);
- icache_enable();
+ /* Set up SMCS1 for Ethernet: sram-like, enabled, timing values */
+ writel(0x0000305b, REG_FSMC_BCR1);
+ writel(0x00033f33, REG_FSMC_BTR1);
+ icache_enable();
return 0;
}