sunxi: dts: arm/arm64: update devicetree files from Linux-v6.9
Sync the devicetree files from the official Linux kernel tree, v6.9.
This is covering Allwinner SoCs with 32-bit and 64-bit ARM cores.
Besides some cosmectic changes, this adds S/PDIF, DMA, and thermal
support to the H616 .dtsi. Nothing that U-Boot needs for itself, but
helpful to pass on to kernels.
This also adds new devicetrees, for some LonganPi H616 board, and the
Remix Mini PC. The latter will get a defconfig next.
As before, this omits the non-backwards compatible changes to the R_INTC
controller, to remain compatible with older kernels.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
diff --git a/arch/arm/dts/sun50i-h616.dtsi b/arch/arm/dts/sun50i-h616.dtsi
index d549d27..b2e85e5 100644
--- a/arch/arm/dts/sun50i-h616.dtsi
+++ b/arch/arm/dts/sun50i-h616.dtsi
@@ -9,6 +9,7 @@
#include <dt-bindings/clock/sun6i-rtc.h>
#include <dt-bindings/reset/sun50i-h616-ccu.h>
#include <dt-bindings/reset/sun50i-h6-r-ccu.h>
+#include <dt-bindings/thermal/thermal.h>
/ {
interrupt-parent = <&gic>;
@@ -133,11 +134,28 @@
#reset-cells = <1>;
};
+ dma: dma-controller@3002000 {
+ compatible = "allwinner,sun50i-h616-dma",
+ "allwinner,sun50i-a100-dma";
+ reg = <0x03002000 0x1000>;
+ interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ccu CLK_BUS_DMA>, <&ccu CLK_MBUS_DMA>;
+ clock-names = "bus", "mbus";
+ dma-channels = <16>;
+ dma-requests = <49>;
+ resets = <&ccu RST_BUS_DMA>;
+ #dma-cells = <1>;
+ };
+
sid: efuse@3006000 {
compatible = "allwinner,sun50i-h616-sid", "allwinner,sun50i-a64-sid";
reg = <0x03006000 0x1000>;
#address-cells = <1>;
#size-cells = <1>;
+
+ ths_calibration: thermal-sensor-calibration@14 {
+ reg = <0x14 0x8>;
+ };
};
watchdog: watchdog@30090a0 {
@@ -240,6 +258,11 @@
function = "spi1";
};
+ spdif_tx_pin: spdif-tx-pin {
+ pins = "PH4";
+ function = "spdif";
+ };
+
uart0_ph_pins: uart0-ph-pins {
pins = "PH0", "PH1";
function = "uart0";
@@ -256,6 +279,12 @@
pins = "PG8", "PG9";
function = "uart1";
};
+
+ /omit-if-no-ref/
+ x32clk_fanout_pin: x32clk-fanout-pin {
+ pins = "PG10";
+ function = "clock";
+ };
};
gic: interrupt-controller@3021000 {
@@ -339,6 +368,8 @@
reg-shift = <2>;
reg-io-width = <4>;
clocks = <&ccu CLK_BUS_UART0>;
+ dmas = <&dma 14>, <&dma 14>;
+ dma-names = "tx", "rx";
resets = <&ccu RST_BUS_UART0>;
status = "disabled";
};
@@ -350,6 +381,8 @@
reg-shift = <2>;
reg-io-width = <4>;
clocks = <&ccu CLK_BUS_UART1>;
+ dmas = <&dma 15>, <&dma 15>;
+ dma-names = "tx", "rx";
resets = <&ccu RST_BUS_UART1>;
status = "disabled";
};
@@ -361,6 +394,8 @@
reg-shift = <2>;
reg-io-width = <4>;
clocks = <&ccu CLK_BUS_UART2>;
+ dmas = <&dma 16>, <&dma 16>;
+ dma-names = "tx", "rx";
resets = <&ccu RST_BUS_UART2>;
status = "disabled";
};
@@ -372,6 +407,8 @@
reg-shift = <2>;
reg-io-width = <4>;
clocks = <&ccu CLK_BUS_UART3>;
+ dmas = <&dma 17>, <&dma 17>;
+ dma-names = "tx", "rx";
resets = <&ccu RST_BUS_UART3>;
status = "disabled";
};
@@ -383,6 +420,8 @@
reg-shift = <2>;
reg-io-width = <4>;
clocks = <&ccu CLK_BUS_UART4>;
+ dmas = <&dma 18>, <&dma 18>;
+ dma-names = "tx", "rx";
resets = <&ccu RST_BUS_UART4>;
status = "disabled";
};
@@ -394,6 +433,8 @@
reg-shift = <2>;
reg-io-width = <4>;
clocks = <&ccu CLK_BUS_UART5>;
+ dmas = <&dma 19>, <&dma 19>;
+ dma-names = "tx", "rx";
resets = <&ccu RST_BUS_UART5>;
status = "disabled";
};
@@ -405,6 +446,8 @@
reg = <0x05002000 0x400>;
interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&ccu CLK_BUS_I2C0>;
+ dmas = <&dma 43>, <&dma 43>;
+ dma-names = "rx", "tx";
resets = <&ccu RST_BUS_I2C0>;
pinctrl-names = "default";
pinctrl-0 = <&i2c0_pins>;
@@ -420,6 +463,8 @@
reg = <0x05002400 0x400>;
interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&ccu CLK_BUS_I2C1>;
+ dmas = <&dma 44>, <&dma 44>;
+ dma-names = "rx", "tx";
resets = <&ccu RST_BUS_I2C1>;
status = "disabled";
#address-cells = <1>;
@@ -433,6 +478,8 @@
reg = <0x05002800 0x400>;
interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&ccu CLK_BUS_I2C2>;
+ dmas = <&dma 45>, <&dma 45>;
+ dma-names = "rx", "tx";
resets = <&ccu RST_BUS_I2C2>;
status = "disabled";
#address-cells = <1>;
@@ -446,6 +493,8 @@
reg = <0x05002c00 0x400>;
interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&ccu CLK_BUS_I2C3>;
+ dmas = <&dma 46>, <&dma 46>;
+ dma-names = "rx", "tx";
resets = <&ccu RST_BUS_I2C3>;
status = "disabled";
#address-cells = <1>;
@@ -459,6 +508,8 @@
reg = <0x05003000 0x400>;
interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&ccu CLK_BUS_I2C4>;
+ dmas = <&dma 47>, <&dma 47>;
+ dma-names = "rx", "tx";
resets = <&ccu RST_BUS_I2C4>;
status = "disabled";
#address-cells = <1>;
@@ -472,6 +523,8 @@
interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&ccu CLK_BUS_SPI0>, <&ccu CLK_SPI0>;
clock-names = "ahb", "mod";
+ dmas = <&dma 22>, <&dma 22>;
+ dma-names = "rx", "tx";
resets = <&ccu RST_BUS_SPI0>;
status = "disabled";
#address-cells = <1>;
@@ -485,6 +538,8 @@
interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&ccu CLK_BUS_SPI1>, <&ccu CLK_SPI1>;
clock-names = "ahb", "mod";
+ dmas = <&dma 23>, <&dma 23>;
+ dma-names = "rx", "tx";
resets = <&ccu RST_BUS_SPI1>;
status = "disabled";
#address-cells = <1>;
@@ -511,6 +566,34 @@
};
};
+ spdif: spdif@5093000 {
+ compatible = "allwinner,sun50i-h616-spdif";
+ reg = <0x05093000 0x400>;
+ interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ccu CLK_BUS_SPDIF>, <&ccu CLK_SPDIF>;
+ clock-names = "apb", "spdif";
+ resets = <&ccu RST_BUS_SPDIF>;
+ dmas = <&dma 2>;
+ dma-names = "tx";
+ pinctrl-names = "default";
+ pinctrl-0 = <&spdif_tx_pin>;
+ #sound-dai-cells = <0>;
+ status = "disabled";
+ };
+
+ ths: thermal-sensor@5070400 {
+ compatible = "allwinner,sun50i-h616-ths";
+ reg = <0x05070400 0x400>;
+ interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ccu CLK_BUS_THS>;
+ clock-names = "bus";
+ resets = <&ccu RST_BUS_THS>;
+ nvmem-cells = <&ths_calibration>;
+ nvmem-cell-names = "calibration";
+ allwinner,sram = <&syscon>;
+ #thermal-sensor-cells = <1>;
+ };
+
usbotg: usb@5100000 {
compatible = "allwinner,sun50i-h616-musb",
"allwinner,sun8i-h3-musb";
@@ -734,6 +817,8 @@
reg = <0x07081400 0x400>;
interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&r_ccu CLK_R_APB2_I2C>;
+ dmas = <&dma 48>, <&dma 48>;
+ dma-names = "rx", "tx";
resets = <&r_ccu RST_R_APB2_I2C>;
status = "disabled";
#address-cells = <1>;
@@ -755,4 +840,74 @@
#size-cells = <0>;
};
};
+
+ thermal-zones {
+ cpu-thermal {
+ polling-delay-passive = <500>;
+ polling-delay = <1000>;
+ thermal-sensors = <&ths 2>;
+ sustainable-power = <1000>;
+
+ trips {
+ cpu_threshold: cpu-trip-0 {
+ temperature = <60000>;
+ type = "passive";
+ hysteresis = <0>;
+ };
+ cpu_target: cpu-trip-1 {
+ temperature = <70000>;
+ type = "passive";
+ hysteresis = <0>;
+ };
+ cpu_critical: cpu-trip-2 {
+ temperature = <110000>;
+ type = "critical";
+ hysteresis = <0>;
+ };
+ };
+ };
+
+ gpu-thermal {
+ polling-delay-passive = <500>;
+ polling-delay = <1000>;
+ thermal-sensors = <&ths 0>;
+ sustainable-power = <1100>;
+
+ trips {
+ gpu_temp_critical: gpu-trip-0 {
+ temperature = <110000>;
+ type = "critical";
+ hysteresis = <0>;
+ };
+ };
+ };
+
+ ve-thermal {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+ thermal-sensors = <&ths 1>;
+
+ trips {
+ ve_temp_critical: ve-trip-0 {
+ temperature = <110000>;
+ type = "critical";
+ hysteresis = <0>;
+ };
+ };
+ };
+
+ ddr-thermal {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+ thermal-sensors = <&ths 3>;
+
+ trips {
+ ddr_temp_critical: ddr-trip-0 {
+ temperature = <110000>;
+ type = "critical";
+ hysteresis = <0>;
+ };
+ };
+ };
+ };
};