ARM: bcm283x: change the virtual address of the XHCI PCI device base
Move the XHCI PCI device base up in the virtual address space. This fixes
initialization failure observed with newer Raspberry Pi firmware, later
than 63b1922311 ("firmware: arm_loader: Update armstubs with those from
PR 117). It looks that chosing 0xff800000 as the XHCI PCI device base
conflicts with the updated ARM/VideoCore firmware.
This also requires to reduce the size of the mapped PCI device region
from 8MiB to 4MiB to fit into 32bit address space. This is still enough
for the XHCI PCI device.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
Reviewed-by: Nicolas Saenz Julienne <nsaenz@kernel.org>
Tested-by: Stefan Agner <stefan@agner.ch>
Signed-off-by: Matthias Brugger <mbrugger@suse.com>
diff --git a/arch/arm/mach-bcm283x/init.c b/arch/arm/mach-bcm283x/init.c
index 49027ce..9803499 100644
--- a/arch/arm/mach-bcm283x/init.c
+++ b/arch/arm/mach-bcm283x/init.c
@@ -14,7 +14,7 @@
#include <asm/global_data.h>
#define BCM2711_RPI4_PCIE_XHCI_MMIO_PHYS 0x600000000UL
-#define BCM2711_RPI4_PCIE_XHCI_MMIO_SIZE 0x800000UL
+#define BCM2711_RPI4_PCIE_XHCI_MMIO_SIZE 0x400000UL
#ifdef CONFIG_ARM64
#include <asm/armv8/mmu.h>
@@ -148,7 +148,7 @@
#ifdef CONFIG_ARMV7_LPAE
#ifdef CONFIG_TARGET_RPI_4_32B
-#define BCM2711_RPI4_PCIE_XHCI_MMIO_VIRT 0xff800000UL
+#define BCM2711_RPI4_PCIE_XHCI_MMIO_VIRT 0xffc00000UL
#include <addr_map.h>
#include <asm/system.h>