arm64: dts: rockchip: Add support for Khadas Edge-V
Add devicetree support for Khadas Edge-V.
Khadas Edge-V is a Khadas VIM form factor Rockchip RK3399 board.
Specification
- Rockchip RK3399
- Dual-Channel 2GB/4GB LPDDR4
- SD card slot
- Onboard 16GB/32GB/128GB eMMC
- RTL8211FD 1Gbps
- AP6356S/AP6398S WiFI/BT
- HDMI Out, DP, MIPI DSI/CSI, eDP
- USB 3.0, 2.0
- USB Type C power and data
- GPIO expansion ports
- Full 4 Lane M.2 Socket
- 16MB SPI Flash
- IR
- Programmable MCU
Commit details of rk3399-khadas-edge-*.dts sync from Linux 5.3-rc2:
"arm64: dts: rockchip: Add support for Khadas Edge/Edge-V/Captain boards"
(sha1: c2aacceedc86af87428d998e23a1aca24fd8aa2e)
Signed-off-by: Nick Xie <nick@khadas.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index f4a1be5..e00860e 100644
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -109,6 +109,7 @@
rk3399-firefly.dtb \
rk3399-gru-bob.dtb \
rk3399-khadas-edge.dtb \
+ rk3399-khadas-edge-v.dtb \
rk3399-nanopc-t4.dtb \
rk3399-nanopi-m4.dtb \
rk3399-nanopi-neo4.dtb \
diff --git a/arch/arm/dts/rk3399-khadas-edge-v-u-boot.dtsi b/arch/arm/dts/rk3399-khadas-edge-v-u-boot.dtsi
new file mode 100644
index 0000000..ca1bbff
--- /dev/null
+++ b/arch/arm/dts/rk3399-khadas-edge-v-u-boot.dtsi
@@ -0,0 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2019 Nick Xie <nick@khadas.com>
+ */
+
+#include "rk3399-khadas-edge-u-boot.dtsi"
diff --git a/arch/arm/dts/rk3399-khadas-edge-v.dts b/arch/arm/dts/rk3399-khadas-edge-v.dts
new file mode 100644
index 0000000..f5dcb99
--- /dev/null
+++ b/arch/arm/dts/rk3399-khadas-edge-v.dts
@@ -0,0 +1,27 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2019 Shenzhen Wesion Technology Co., Ltd.
+ * (https://www.khadas.com)
+ */
+
+/dts-v1/;
+#include "rk3399-khadas-edge.dtsi"
+
+/ {
+ model = "Khadas Edge-V";
+ compatible = "khadas,edge-v", "rockchip,rk3399";
+};
+
+&gmac {
+ status = "okay";
+};
+
+&pcie_phy {
+ status = "okay";
+};
+
+&pcie0 {
+ ep-gpios = <&gpio1 RK_PA3 GPIO_ACTIVE_HIGH>;
+ num-lanes = <4>;
+ status = "okay";
+};