diff --git a/board/ti/am335x/Makefile b/board/ti/am335x/Makefile
index cb2b999..3dbeeda 100644
--- a/board/ti/am335x/Makefile
+++ b/board/ti/am335x/Makefile
@@ -10,7 +10,7 @@
 
 LIB	= $(obj)lib$(BOARD).o
 
-ifdef CONFIG_SPL_BUILD
+ifeq ($(CONFIG_SPL_BUILD)$(CONFIG_NOR_BOOT),y)
 COBJS	:= mux.o
 endif
 
diff --git a/board/ti/am335x/board.c b/board/ti/am335x/board.c
index b12341d..728afc2 100644
--- a/board/ti/am335x/board.c
+++ b/board/ti/am335x/board.c
@@ -83,7 +83,7 @@
 	return 0;
 }
 
-#ifdef CONFIG_SPL_BUILD
+#if defined(CONFIG_SPL_BUILD) || defined(CONFIG_NOR_BOOT)
 static const struct ddr_data ddr2_data = {
 	.datardsratio0 = ((MT47H128M16RT25E_RD_DQS<<30) |
 			  (MT47H128M16RT25E_RD_DQS<<20) |
@@ -249,10 +249,28 @@
  */
 void s_init(void)
 {
-#ifdef CONFIG_SPL_BUILD
-	struct am335x_baseboard_id header;
+	__maybe_unused struct am335x_baseboard_id header;
 
 	/*
+	 * The ROM will only have set up sufficient pinmux to allow for the
+	 * first 4KiB NOR to be read, we must finish doing what we know of
+	 * the NOR mux in this space in order to continue.
+	 */
+#ifdef CONFIG_NOR_BOOT
+	asm("stmfd      sp!, {r2 - r4}");
+	asm("movw       r4, #0x8A4");
+	asm("movw       r3, #0x44E1");
+	asm("orr        r4, r4, r3, lsl #16");
+	asm("mov        r2, #9");
+	asm("mov        r3, #8");
+	asm("gpmc_mux:  str     r2, [r4], #4");
+	asm("subs       r3, r3, #1");
+	asm("bne        gpmc_mux");
+	asm("ldmfd      sp!, {r2 - r4}");
+#endif
+
+#ifdef CONFIG_SPL_BUILD
+	/*
 	 * Save the boot parameters passed from romcode.
 	 * We cannot delay the saving further than this,
 	 * to prevent overwrites.
@@ -270,7 +288,7 @@
 	while (readl(&wdtimer->wdtwwps) != 0x0)
 		;
 
-#ifdef CONFIG_SPL_BUILD
+#if defined(CONFIG_SPL_BUILD) || defined(CONFIG_NOR_BOOT)
 	/* Setup the PLLs and the clocks for the peripherals */
 	pll_init();
 
@@ -298,9 +316,16 @@
 
 	uart_soft_reset();
 
+#if defined(CONFIG_NOR_BOOT)
+	/* We want our console now. */
+	gd->baudrate = CONFIG_BAUDRATE;
+	serial_init();
+	gd->have_console = 1;
+#else
 	gd = &gdata;
 
 	preloader_console_init();
+#endif
 
 	/* Initalize the board header */
 	enable_i2c0_pin_mux();
diff --git a/board/ti/am335x/mux.c b/board/ti/am335x/mux.c
index 187468e..5b7ed63 100644
--- a/board/ti/am335x/mux.c
+++ b/board/ti/am335x/mux.c
@@ -190,7 +190,7 @@
 	{-1},
 };
 
-#if defined(CONFIG_NOR)
+#if defined(CONFIG_NOR) && !defined(CONFIG_NOR_BOOT)
 static struct module_pin_mux bone_norcape_pin_mux[] = {
 	{OFFSET(lcd_data0), MODE(1) | PULLUDEN | RXACTIVE},     /* NOR_A0 */
 	{OFFSET(lcd_data1), MODE(1) | PULLUDEN | RXACTIVE},     /* NOR_A1 */
@@ -317,8 +317,10 @@
 		configure_module_pin_mux(i2c1_pin_mux);
 		configure_module_pin_mux(mii1_pin_mux);
 		configure_module_pin_mux(mmc0_pin_mux);
+#ifndef CONFIG_NOR
 		configure_module_pin_mux(mmc1_pin_mux);
-#if defined(CONFIG_NOR)
+#endif
+#if defined(CONFIG_NOR) && !defined(CONFIG_NOR_BOOT)
 		configure_module_pin_mux(bone_norcape_pin_mux);
 #endif
 	} else if (board_is_gp_evm(header)) {
diff --git a/board/ti/am335x/u-boot.lds b/board/ti/am335x/u-boot.lds
new file mode 100644
index 0000000..a173f62
--- /dev/null
+++ b/board/ti/am335x/u-boot.lds
@@ -0,0 +1,117 @@
+/*
+ * Copyright (c) 2004-2008 Texas Instruments
+ *
+ * (C) Copyright 2002
+ * Gary Jennejohn, DENX Software Engineering, <garyj@denx.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm")
+OUTPUT_ARCH(arm)
+ENTRY(_start)
+SECTIONS
+{
+	. = 0x00000000;
+
+	. = ALIGN(4);
+	.text :
+	{
+		*(.__image_copy_start)
+		CPUDIR/start.o (.text*)
+		board/ti/am335x/libam335x.o (.text*)
+		*(.text*)
+	}
+
+	. = ALIGN(4);
+	.rodata : { *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) }
+
+	. = ALIGN(4);
+	.data : {
+		*(.data*)
+	}
+
+	. = ALIGN(4);
+
+	. = .;
+
+	. = ALIGN(4);
+	.u_boot_list : {
+		KEEP(*(SORT(.u_boot_list*)));
+	}
+
+	. = ALIGN(4);
+
+	.image_copy_end :
+	{
+		*(.__image_copy_end)
+	}
+
+	.rel_dyn_start :
+	{
+		*(.__rel_dyn_start)
+	}
+
+	.rel.dyn : {
+		*(.rel*)
+	}
+
+	.rel_dyn_end :
+	{
+		*(.__rel_dyn_end)
+	}
+
+	_end = .;
+
+	/*
+	 * Deprecated: this MMU section is used by pxa at present but
+	 * should not be used by new boards/CPUs.
+	 */
+	. = ALIGN(4096);
+	.mmutable : {
+		*(.mmutable)
+	}
+
+/*
+ * Compiler-generated __bss_start and __bss_end, see arch/arm/lib/bss.c
+ * __bss_base and __bss_limit are for linker only (overlay ordering)
+ */
+
+	.bss_start __rel_dyn_start (OVERLAY) : {
+		KEEP(*(.__bss_start));
+		__bss_base = .;
+	}
+
+	.bss __bss_base (OVERLAY) : {
+		*(.bss*)
+		 . = ALIGN(4);
+		 __bss_limit = .;
+	}
+
+	.bss_end __bss_limit (OVERLAY) : {
+		KEEP(*(.__bss_end));
+	}
+
+	/DISCARD/ : { *(.dynsym) }
+	/DISCARD/ : { *(.dynstr*) }
+	/DISCARD/ : { *(.dynamic*) }
+	/DISCARD/ : { *(.plt*) }
+	/DISCARD/ : { *(.interp*) }
+	/DISCARD/ : { *(.gnu*) }
+}