tegra20: port to new ehci interface
EHCI interface now supports more than one controller. Wire up our usb functions
to use this new interface.
Signed-off-by: Lucas Stach <dev@lynxeye.de>
diff --git a/arch/arm/cpu/armv7/tegra20/usb.c b/arch/arm/cpu/armv7/tegra20/usb.c
index cac0918..eda8e6f 100644
--- a/arch/arm/cpu/armv7/tegra20/usb.c
+++ b/arch/arm/cpu/armv7/tegra20/usb.c
@@ -77,7 +77,6 @@
static struct fdt_usb port[USB_PORTS_MAX]; /* List of valid USB ports */
static unsigned port_count; /* Number of available ports */
-static int port_current; /* Current port (-1 = none) */
/*
* This table has USB timing parameters for each Oscillator frequency we
@@ -351,30 +350,25 @@
return 0;
}
-int tegrausb_start_port(unsigned portnum, u32 *hccr, u32 *hcor)
+int tegrausb_start_port(int portnum, u32 *hccr, u32 *hcor)
{
struct usb_ctlr *usbctlr;
if (portnum >= port_count)
return -1;
- tegrausb_stop_port();
set_host_mode(&port[portnum]);
usbctlr = port[portnum].reg;
*hccr = (u32)&usbctlr->cap_length;
*hcor = (u32)&usbctlr->usb_cmd;
- port_current = portnum;
return 0;
}
-int tegrausb_stop_port(void)
+int tegrausb_stop_port(int portnum)
{
struct usb_ctlr *usbctlr;
- if (port_current == -1)
- return -1;
-
- usbctlr = port[port_current].reg;
+ usbctlr = port[portnum].reg;
/* Stop controller */
writel(0, &usbctlr->usb_cmd);
@@ -383,7 +377,7 @@
/* Initiate controller reset */
writel(2, &usbctlr->usb_cmd);
udelay(1000);
- port_current = -1;
+
return 0;
}
@@ -459,7 +453,6 @@
return -1;
set_host_mode(&config);
}
- port_current = -1;
return 0;
}
diff --git a/arch/arm/include/asm/arch-tegra20/usb.h b/arch/arm/include/asm/arch-tegra20/usb.h
index 638033b..4bbd4aa 100644
--- a/arch/arm/include/asm/arch-tegra20/usb.h
+++ b/arch/arm/include/asm/arch-tegra20/usb.h
@@ -240,13 +240,13 @@
* @param hcor returns start address of EHCI HCOR registers
* @return 0 if ok, -1 on error (generally invalid port number)
*/
-int tegrausb_start_port(unsigned portnum, u32 *hccr, u32 *hcor);
+int tegrausb_start_port(int portnum, u32 *hccr, u32 *hcor);
/**
* Stop the current port
*
* @return 0 if ok, -1 if no port was active
*/
-int tegrausb_stop_port(void);
+int tegrausb_stop_port(int portnum);
#endif /* _TEGRA_USB_H_ */
diff --git a/drivers/usb/host/ehci-tegra.c b/drivers/usb/host/ehci-tegra.c
index bb5a68e..a1c43f8 100644
--- a/drivers/usb/host/ehci-tegra.c
+++ b/drivers/usb/host/ehci-tegra.c
@@ -57,7 +57,7 @@
* Select the first port, as we don't have a way of selecting others
* yet
*/
- if (tegrausb_start_port(0, &our_hccr, &our_hcor))
+ if (tegrausb_start_port(index, &our_hccr, &our_hcor))
return -1;
*hccr = (struct ehci_hccr *)our_hccr;
@@ -72,6 +72,5 @@
*/
int ehci_hcd_stop(int index)
{
- tegrausb_stop_port();
- return 0;
+ return tegrausb_stop_port(index);
}