Enable PCI on hmi1001 board
diff --git a/CHANGELOG b/CHANGELOG
index 51c09ee..2d24962 100644
--- a/CHANGELOG
+++ b/CHANGELOG
@@ -2,6 +2,8 @@
Changes for U-Boot 1.1.4:
======================================================================
+* Enable PCI on hmi1001 board
+
* Fix return values of the jffs2 commands ls/fsload/fsinfo,
so we can use them to, e.g., check the existence of a file with
"if ls foo; then this; else that; fi" in the hush shell
diff --git a/board/hmi1001/hmi1001.c b/board/hmi1001/hmi1001.c
index 8980209..fca11d0 100644
--- a/board/hmi1001/hmi1001.c
+++ b/board/hmi1001/hmi1001.c
@@ -170,3 +170,13 @@
*(vu_long *)MPC5XXX_CS0_STOP = STOP_REG(CFG_FLASH_BASE, CFG_FLASH_SIZE);
return 0;
}
+#ifdef CONFIG_PCI
+static struct pci_controller hose;
+
+extern void pci_mpc5xxx_init(struct pci_controller *);
+
+void pci_init_board(void)
+{
+ pci_mpc5xxx_init(&hose);
+}
+#endif
diff --git a/include/configs/hmi1001.h b/include/configs/hmi1001.h
index 7f9fea5..9da15ed 100644
--- a/include/configs/hmi1001.h
+++ b/include/configs/hmi1001.h
@@ -65,6 +65,7 @@
CFG_CMD_I2C | \
CFG_CMD_IDE | \
CFG_CMD_NFS | \
+ CFG_CMD_PCI | \
CFG_CMD_SNTP)
/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
@@ -307,4 +308,21 @@
#define CONFIG_ATAPI 1
+/*
+ * PCI Mapping:
+ * 0x40000000 - 0x4fffffff - PCI Memory
+ * 0x50000000 - 0x50ffffff - PCI IO Space
+ */
+#define CONFIG_PCI 1
+#define CONFIG_PCI_PNP 1
+#define CONFIG_PCI_SCAN_SHOW 1
+
+#define CONFIG_PCI_MEM_BUS 0x40000000
+#define CONFIG_PCI_MEM_PHYS CONFIG_PCI_MEM_BUS
+#define CONFIG_PCI_MEM_SIZE 0x10000000
+
+#define CONFIG_PCI_IO_BUS 0x50000000
+#define CONFIG_PCI_IO_PHYS CONFIG_PCI_IO_BUS
+#define CONFIG_PCI_IO_SIZE 0x01000000
+
#endif /* __CONFIG_H */