board: MCR3000: cleanup config
Some config is redundant with Kconfig. Fix it.
Also remove unused configs
Move SDRAM_MAX_SIZE in the only place it is used
include/environment.h already defines CONFIG_ENV_SIZE
from CONFIG_ENV_SECT_SIZE and defines CONFIG_ENV_ADDR as
(CONFIG_SYS_FLASH_BASE + CONFIG_ENV_OFFSET)
remove BOOTARGS as bootargs is set by the different boot commands
Fix CONFIG_SYS_INIT_RAM_ADDR and CONFIG_SYS_INIT_RAM_SIZE to be in
line with CPM DPRAM organisation
Remove CONFIG_SYS_GBL_DATA_SIZE, CONFIG_SYS_GBL_DATA_OFFSET and
CONFIG_SYS_INIT_SP_OFFSET which are unused
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
diff --git a/include/configs/MCR3000.h b/include/configs/MCR3000.h
index 6b03873..7e9fe38 100644
--- a/include/configs/MCR3000.h
+++ b/include/configs/MCR3000.h
@@ -9,7 +9,6 @@
#define __CONFIG_H
/* High Level Configuration Options */
-#define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_early_init_f */
#define CONFIG_MISC_INIT_R 1 /* Call misc_init_r */
#define CONFIG_EXTRA_ENV_SETTINGS \
@@ -55,25 +54,16 @@
"${ofl_args}; " \
"bootm ${loadaddr} - 0xf00000\0"
-#define CONFIG_BOOTDELAY 5
-
#define CONFIG_IPADDR 192.168.0.3
#define CONFIG_SERVERIP 192.168.0.1
#define CONFIG_NETMASK 255.0.0.0
-#define CONFIG_BOOTCOMMAND "run flashboot"
-
#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
-#undef CONFIG_LOADS_BAUD_CHANGE /* don't allow baudrate change */
#define CONFIG_WATCHDOG 1 /* watchdog enabled */
/* Miscellaneous configurable options */
-#ifdef CONFIG_HUSH_PARSER
-#define CONFIG_SYS_PROMPT_HUSH_PS2 "S3K> "
-#endif
-
#define CONFIG_SYS_MEMTEST_START 0x00002000
#define CONFIG_SYS_MEMTEST_END 0x00800000
@@ -82,16 +72,11 @@
#define CONFIG_SYS_HZ 1000
/* Definitions for initial stack pointer and data area (in DPRAM) */
-#define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_IMMR
-#define CONFIG_SYS_INIT_RAM_SIZE 0x2f00
-#define CONFIG_SYS_GBL_DATA_SIZE 64
-#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - \
- CONFIG_SYS_GBL_DATA_SIZE)
-#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET
+#define CONFIG_SYS_INIT_RAM_ADDR (CONFIG_SYS_IMMR + 0x2800)
+#define CONFIG_SYS_INIT_RAM_SIZE (0x2e00 - 0x2800)
/* RAM configuration (note that CONFIG_SYS_SDRAM_BASE must be zero) */
#define CONFIG_SYS_SDRAM_BASE 0x00000000
-#define SDRAM_MAX_SIZE (32 * 1024 * 1024)
/* FLASH organization */
#define CONFIG_SYS_FLASH_BASE CONFIG_SYS_TEXT_BASE
@@ -116,29 +101,16 @@
/* environment is in FLASH */
#define CONFIG_ENV_SECT_SIZE (64 * 1024)
-#define CONFIG_ENV_SIZE CONFIG_ENV_SECT_SIZE
-#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + CONFIG_SYS_MONITOR_LEN)
-#define CONFIG_ENV_OFFSET (CONFIG_ENV_ADDR - CONFIG_SYS_FLASH_BASE)
+#define CONFIG_ENV_OFFSET CONFIG_SYS_MONITOR_LEN
#define CONFIG_ENV_OVERWRITE 1
-/* Cache Configuration */
-#define CONFIG_SYS_CACHELINE_SIZE 16
-
/* Ethernet configuration part */
#define CONFIG_SYS_DISCOVER_PHY 1
-#ifdef CONFIG_MPC8XX_FEC
#define CONFIG_MII_INIT 1
-#endif
/* NAND configuration part */
#define CONFIG_SYS_MAX_NAND_DEVICE 1
#define CONFIG_SYS_NAND_MAX_CHIPS 1
#define CONFIG_SYS_NAND_BASE 0x0C000000
-/* Internal Definitions */
-
-/* Boot Flags*/
-#define BOOTFLAG_COLD 0x01
-#define BOOTFLAG_WARM 0x02
-
#endif /* __CONFIG_H */