ARM: renesas: Add Renesas R8A779H0 V4M Gray Hawk board code
Add board code for the Renesas R8A779H0 V4M Gray Hawk board.
Signed-off-by: Hai Pham <hai.pham.ud@renesas.com>
diff --git a/board/renesas/grayhawk/grayhawk.c b/board/renesas/grayhawk/grayhawk.c
new file mode 100644
index 0000000..6f2e73f
--- /dev/null
+++ b/board/renesas/grayhawk/grayhawk.c
@@ -0,0 +1,66 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * board/renesas/grayhawk/grayhawk.c
+ * This file is Gray Hawk board support.
+ *
+ * Copyright (C) 2023 Renesas Electronics Corp.
+ */
+
+#include <asm/arch/rmobile.h>
+#include <asm/arch/sys_proto.h>
+#include <asm/global_data.h>
+#include <asm/io.h>
+#include <asm/mach-types.h>
+#include <asm/processor.h>
+#include <linux/errno.h>
+#include <asm/system.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+static void init_generic_timer(void)
+{
+ const u32 freq = CONFIG_SYS_CLK_FREQ;
+
+ /* Update memory mapped and register based freqency */
+ asm volatile ("msr cntfrq_el0, %0" :: "r" (freq));
+ writel(freq, CNTFID0);
+
+ /* Enable counter */
+ setbits_le32(CNTCR_BASE, CNTCR_EN);
+}
+
+static void init_gic_v3(void)
+{
+ /* GIC v3 power on */
+ writel(BIT(1), GICR_LPI_PWRR);
+
+ /* Wait till the WAKER_CA_BIT changes to 0 */
+ clrbits_le32(GICR_LPI_WAKER, BIT(1));
+ while (readl(GICR_LPI_WAKER) & BIT(2))
+ ;
+
+ writel(0xffffffff, GICR_SGI_BASE + GICR_IGROUPR0);
+}
+
+void s_init(void)
+{
+ if (current_el() == 3)
+ init_generic_timer();
+}
+
+int board_early_init_f(void)
+{
+ /* Unlock CPG access */
+ writel(0x5A5AFFFF, CPGWPR);
+ writel(0xA5A50000, CPGWPCR);
+
+ return 0;
+}
+
+int board_init(void)
+{
+ if (current_el() == 3)
+ init_gic_v3();
+
+ return 0;
+}