arm: imx6: tqma6: add support for TQMa6DL variant
This adds support for TQMa6DL using i.MX6DL and 1GiB DRAM
Since The module will use the same devicetree, we patch
the ram size in ft_board_setup.
Signed-off-by: Markus Niebel <Markus.Niebel@tq-group.com>
diff --git a/board/tqc/tqma6/Kconfig b/board/tqc/tqma6/Kconfig
index 5dafa38..6df4134 100644
--- a/board/tqc/tqma6/Kconfig
+++ b/board/tqc/tqma6/Kconfig
@@ -22,6 +22,12 @@
help
select TQMa6Q / TQMa6D with i.MX6Q/D and 1GiB DRAM
+config TQMA6DL
+ bool "TQMa6DL"
+ select MX6DL
+ help
+ select TQMa6DL with i.MX6DL and 1GiB DRAM
+
config TQMA6S
bool "TQMa6S"
select MX6S
@@ -70,6 +76,7 @@
config IMX_CONFIG
default "board/tqc/tqma6/tqma6q.cfg" if TQMA6Q
+ default "board/tqc/tqma6/tqma6dl.cfg" if TQMA6DL
default "board/tqc/tqma6/tqma6s.cfg" if TQMA6S
endif
diff --git a/board/tqc/tqma6/README b/board/tqc/tqma6/README
index 2c012e7..c47cb21 100644
--- a/board/tqc/tqma6/README
+++ b/board/tqc/tqma6/README
@@ -21,6 +21,7 @@
x is a placeholder for the CPU variant
q - means i.MX6Q/D: TQMa6Q (i.MX6Q) and TQMa6D (i.MX6D)
+dl - means i.MX6DL: TQMa6DL (i.MX6DL)
s - means i.MX6S: TQMa6S (i.MX6S)
baseboard is a placeholder for the boot device
@@ -31,5 +32,7 @@
tqma6q_mba6_mmc_config
tqma6q_mba6_spi_config
+tqma6dl_mba6_mmc_config
+tqma6dl_mba6_spi_config
tqma6s_mba6_mmc_config
tqma6s_mba6_spi_config
diff --git a/board/tqc/tqma6/tqma6.c b/board/tqc/tqma6/tqma6.c
index 49917c1..fdb0fa1 100644
--- a/board/tqc/tqma6/tqma6.c
+++ b/board/tqc/tqma6/tqma6.c
@@ -269,8 +269,15 @@
* Device Tree Support
*/
#if defined(CONFIG_OF_BOARD_SETUP) && defined(CONFIG_OF_LIBFDT)
+#define MODELSTRLEN 32u
int ft_board_setup(void *blob, bd_t *bd)
{
+ char modelstr[MODELSTRLEN];
+
+ snprintf(modelstr, MODELSTRLEN, "TQ %s on %s", tqma6_get_boardname(),
+ tqma6_bb_get_boardname());
+ do_fixup_by_path_string(blob, "/", "model", modelstr);
+ fdt_fixup_memory(blob, (u64)PHYS_SDRAM, (u64)gd->ram_size);
/* bring in eMMC dsr settings */
do_fixup_by_path_u32(blob,
"/soc/aips-bus@02100000/usdhc@02198000",
diff --git a/board/tqc/tqma6/tqma6_mba6.c b/board/tqc/tqma6/tqma6_mba6.c
index 0be7845..43349ad 100644
--- a/board/tqc/tqma6/tqma6_mba6.c
+++ b/board/tqc/tqma6/tqma6_mba6.c
@@ -59,7 +59,7 @@
#define IOMUX_SW_PAD_CTRL_GRP_DDR_TYPE_RGMII 0x02e0790
#define IOMUX_SW_PAD_CTRL_GRP_RGMII_TERM 0x02e07ac
-#elif defined(CONFIG_TQMA6S)
+#elif defined(CONFIG_TQMA6S) || defined(CONFIG_TQMA6DL)
#define IOMUX_SW_PAD_CTRL_GRP_DDR_TYPE_RGMII 0x02e0768
#define IOMUX_SW_PAD_CTRL_GRP_RGMII_TERM 0x02e0788
@@ -245,13 +245,14 @@
* optimized pad skew values depends on CPU variant on the TQMa6x module:
* CONFIG_TQMA6Q: i.MX6Q/D
* CONFIG_TQMA6S: i.MX6S
+ * CONFIG_TQMA6DL: i.MX6DL
*/
#if defined(CONFIG_TQMA6Q)
#define MBA6X_KSZ9031_CTRL_SKEW 0x0032
#define MBA6X_KSZ9031_CLK_SKEW 0x03ff
#define MBA6X_KSZ9031_RX_SKEW 0x3333
#define MBA6X_KSZ9031_TX_SKEW 0x2036
-#elif defined(CONFIG_TQMA6S)
+#elif defined(CONFIG_TQMA6S) || defined(CONFIG_TQMA6DL)
#define MBA6X_KSZ9031_CTRL_SKEW 0x0030
#define MBA6X_KSZ9031_CLK_SKEW 0x03ff
#define MBA6X_KSZ9031_RX_SKEW 0x3333
diff --git a/board/tqc/tqma6/tqma6dl.cfg b/board/tqc/tqma6/tqma6dl.cfg
new file mode 100644
index 0000000..716033f
--- /dev/null
+++ b/board/tqc/tqma6/tqma6dl.cfg
@@ -0,0 +1,125 @@
+/*
+ * Copyright (C) 2014 - 2015 Markus Niebel <Markus.Niebel@tq-group.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ *
+ * Refer doc/README.imximage for more details about how-to configure
+ * and create imximage boot image
+ *
+ * The syntax is taken as close as possible with the kwbimage
+ */
+
+/* image version */
+IMAGE_VERSION 2
+
+#define __ASSEMBLY__
+#include <config.h>
+
+/*
+ * Boot Device : one of
+ * spi, sd (the board has no nand neither onenand)
+ */
+#if defined(CONFIG_TQMA6X_MMC_BOOT)
+BOOT_FROM sd
+#elif defined(CONFIG_TQMA6X_SPI_BOOT)
+BOOT_FROM spi
+#endif
+
+#include "asm/arch/mx6-ddr.h"
+#include "asm/arch/iomux.h"
+#include "asm/arch/crm_regs.h"
+
+/* TQMa6DL DDR config Rev. 0100E */
+/* IOMUX configuration */
+DATA 4, MX6_IOM_GRP_DDR_TYPE, 0x000C0000
+DATA 4, MX6_IOM_GRP_DDRPKE, 0x00000000
+DATA 4, MX6_IOM_DRAM_SDCLK_0, 0x00008030
+DATA 4, MX6_IOM_DRAM_SDCLK_1, 0x00008030
+DATA 4, MX6_IOM_DRAM_CAS, 0x00008030
+DATA 4, MX6_IOM_DRAM_RAS, 0x00008030
+DATA 4, MX6_IOM_GRP_ADDDS, 0x00000030
+DATA 4, MX6_IOM_DRAM_RESET, 0x000C3030
+DATA 4, MX6_IOM_DRAM_SDCKE0, 0x00003000
+DATA 4, MX6_IOM_DRAM_SDCKE1, 0x00000000
+DATA 4, MX6_IOM_DRAM_SDBA2, 0x00000000
+DATA 4, MX6_IOM_DRAM_SDODT0, 0x00003030
+DATA 4, MX6_IOM_DRAM_SDODT1, 0x00003030
+DATA 4, MX6_IOM_GRP_CTLDS, 0x00000030
+DATA 4, MX6_IOM_DDRMODE_CTL, 0x00020000
+DATA 4, MX6_IOM_DRAM_SDQS0, 0x00000030
+DATA 4, MX6_IOM_DRAM_SDQS1, 0x00000030
+DATA 4, MX6_IOM_DRAM_SDQS2, 0x00000030
+DATA 4, MX6_IOM_DRAM_SDQS3, 0x00000030
+DATA 4, MX6_IOM_DRAM_SDQS4, 0x00000030
+DATA 4, MX6_IOM_DRAM_SDQS5, 0x00000030
+DATA 4, MX6_IOM_DRAM_SDQS6, 0x00000030
+DATA 4, MX6_IOM_DRAM_SDQS7, 0x00000030
+DATA 4, MX6_IOM_GRP_DDRMODE, 0x00020000
+DATA 4, MX6_IOM_GRP_B0DS, 0x00000030
+DATA 4, MX6_IOM_GRP_B1DS, 0x00000030
+DATA 4, MX6_IOM_GRP_B2DS, 0x00000030
+DATA 4, MX6_IOM_GRP_B3DS, 0x00000030
+DATA 4, MX6_IOM_GRP_B4DS, 0x00000030
+DATA 4, MX6_IOM_GRP_B5DS, 0x00000030
+DATA 4, MX6_IOM_GRP_B6DS, 0x00000030
+DATA 4, MX6_IOM_GRP_B7DS, 0x00000030
+DATA 4, MX6_IOM_DRAM_DQM0, 0x00000030
+DATA 4, MX6_IOM_DRAM_DQM1, 0x00000030
+DATA 4, MX6_IOM_DRAM_DQM2, 0x00000030
+DATA 4, MX6_IOM_DRAM_DQM3, 0x00000030
+DATA 4, MX6_IOM_DRAM_DQM4, 0x00000030
+DATA 4, MX6_IOM_DRAM_DQM5, 0x00000030
+DATA 4, MX6_IOM_DRAM_DQM6, 0x00000030
+DATA 4, MX6_IOM_DRAM_DQM7, 0x00000030
+
+/* memory interface calibration values */
+DATA 4, MX6_MMDC_P0_MPZQHWCTRL, 0xA1390003
+DATA 4, MX6_MMDC_P1_MPZQHWCTRL, 0xA1390003
+DATA 4, MX6_MMDC_P0_MPWLDECTRL0, 0x00440048
+DATA 4, MX6_MMDC_P0_MPWLDECTRL1, 0x003D003F
+DATA 4, MX6_MMDC_P1_MPWLDECTRL0, 0x0029002D
+DATA 4, MX6_MMDC_P1_MPWLDECTRL1, 0x002B0043
+DATA 4, MX6_MMDC_P0_MPDGCTRL0, 0x424C0250
+DATA 4, MX6_MMDC_P0_MPDGCTRL1, 0x02300234
+DATA 4, MX6_MMDC_P1_MPDGCTRL0, 0x4234023C
+DATA 4, MX6_MMDC_P1_MPDGCTRL1, 0x0224022C
+DATA 4, MX6_MMDC_P0_MPRDDLCTL, 0x48484C4C
+DATA 4, MX6_MMDC_P1_MPRDDLCTL, 0x4C4E4E4C
+DATA 4, MX6_MMDC_P0_MPWRDLCTL, 0x36382C36
+DATA 4, MX6_MMDC_P1_MPWRDLCTL, 0x34343630
+DATA 4, MX6_MMDC_P0_MPRDDQBY0DL, 0x33333333
+DATA 4, MX6_MMDC_P0_MPRDDQBY1DL, 0x33333333
+DATA 4, MX6_MMDC_P0_MPRDDQBY2DL, 0x33333333
+DATA 4, MX6_MMDC_P0_MPRDDQBY3DL, 0x33333333
+DATA 4, MX6_MMDC_P1_MPRDDQBY0DL, 0x33333333
+DATA 4, MX6_MMDC_P1_MPRDDQBY1DL, 0x33333333
+DATA 4, MX6_MMDC_P1_MPRDDQBY2DL, 0x33333333
+DATA 4, MX6_MMDC_P1_MPRDDQBY3DL, 0x33333333
+DATA 4, MX6_MMDC_P0_MPMUR0, 0x00000800
+DATA 4, MX6_MMDC_P1_MPMUR0, 0x00000800
+
+/* configure memory interface */
+DATA 4, MX6_MMDC_P0_MDPDC, 0x0002002D
+DATA 4, MX6_MMDC_P0_MDOTC, 0x00333030
+DATA 4, MX6_MMDC_P0_MDCFG0, 0x3F435333
+DATA 4, MX6_MMDC_P0_MDCFG1, 0xB68E8B63
+DATA 4, MX6_MMDC_P0_MDCFG2, 0x01FF00DB
+DATA 4, MX6_MMDC_P0_MDMISC, 0x00001740
+DATA 4, MX6_MMDC_P0_MDSCR, 0x00008000
+DATA 4, MX6_MMDC_P0_MDRWD, 0x000026D2
+DATA 4, MX6_MMDC_P0_MDOR, 0x00431023
+DATA 4, MX6_MMDC_P0_MDASP, 0x00000027
+DATA 4, MX6_MMDC_P0_MDCTL, 0x831A0000
+DATA 4, MX6_MMDC_P0_MDSCR, 0x00408032
+DATA 4, MX6_MMDC_P0_MDSCR, 0x00008033
+DATA 4, MX6_MMDC_P0_MDSCR, 0x00048031
+DATA 4, MX6_MMDC_P0_MDSCR, 0x05208030
+DATA 4, MX6_MMDC_P0_MDSCR, 0x04008040
+DATA 4, MX6_MMDC_P0_MDREF, 0x00007800
+DATA 4, MX6_MMDC_P0_MPODTCTRL, 0x00022222
+DATA 4, MX6_MMDC_P1_MPODTCTRL, 0x00022222
+DATA 4, MX6_MMDC_P0_MDPDC, 0x0002552D
+DATA 4, MX6_MMDC_P0_MAPSR, 0x00001006
+DATA 4, MX6_MMDC_P0_MDSCR, 0x00000000
+
+#include "clocks.cfg"
diff --git a/configs/tqma6dl_mba6_mmc_defconfig b/configs/tqma6dl_mba6_mmc_defconfig
new file mode 100644
index 0000000..6e4e6f7
--- /dev/null
+++ b/configs/tqma6dl_mba6_mmc_defconfig
@@ -0,0 +1,34 @@
+CONFIG_ARM=y
+CONFIG_ARCH_MX6=y
+CONFIG_TARGET_TQMA6=y
+CONFIG_TQMA6DL=y
+CONFIG_FIT=y
+CONFIG_FIT_VERBOSE=y
+CONFIG_OF_BOARD_SETUP=y
+CONFIG_BOOTDELAY=3
+CONFIG_DEFAULT_FDT_FILE="imx6dl-mba6x.dtb"
+CONFIG_BOARD_EARLY_INIT_F=y
+CONFIG_HUSH_PARSER=y
+CONFIG_CMD_BOOTZ=y
+# CONFIG_CMD_IMLS is not set
+# CONFIG_CMD_FLASH is not set
+CONFIG_CMD_MMC=y
+CONFIG_CMD_SF=y
+CONFIG_CMD_SPI=y
+CONFIG_CMD_I2C=y
+CONFIG_CMD_USB=y
+CONFIG_CMD_GPIO=y
+CONFIG_CMD_DHCP=y
+CONFIG_CMD_MII=y
+CONFIG_CMD_PING=y
+CONFIG_CMD_CACHE=y
+CONFIG_CMD_EXT2=y
+CONFIG_CMD_EXT4=y
+CONFIG_CMD_EXT4_WRITE=y
+CONFIG_CMD_FAT=y
+CONFIG_CMD_FS_GENERIC=y
+CONFIG_SPI_FLASH=y
+CONFIG_SPI_FLASH_STMICRO=y
+CONFIG_USB=y
+CONFIG_USB_STORAGE=y
+CONFIG_OF_LIBFDT=y
diff --git a/configs/tqma6dl_mba6_spi_defconfig b/configs/tqma6dl_mba6_spi_defconfig
new file mode 100644
index 0000000..9cd5481
--- /dev/null
+++ b/configs/tqma6dl_mba6_spi_defconfig
@@ -0,0 +1,35 @@
+CONFIG_ARM=y
+CONFIG_ARCH_MX6=y
+CONFIG_TARGET_TQMA6=y
+CONFIG_TQMA6DL=y
+CONFIG_TQMA6X_SPI_BOOT=y
+CONFIG_FIT=y
+CONFIG_FIT_VERBOSE=y
+CONFIG_OF_BOARD_SETUP=y
+CONFIG_BOOTDELAY=3
+CONFIG_DEFAULT_FDT_FILE="imx6dl-mba6x.dtb"
+CONFIG_BOARD_EARLY_INIT_F=y
+CONFIG_HUSH_PARSER=y
+CONFIG_CMD_BOOTZ=y
+# CONFIG_CMD_IMLS is not set
+# CONFIG_CMD_FLASH is not set
+CONFIG_CMD_MMC=y
+CONFIG_CMD_SF=y
+CONFIG_CMD_SPI=y
+CONFIG_CMD_I2C=y
+CONFIG_CMD_USB=y
+CONFIG_CMD_GPIO=y
+CONFIG_CMD_DHCP=y
+CONFIG_CMD_MII=y
+CONFIG_CMD_PING=y
+CONFIG_CMD_CACHE=y
+CONFIG_CMD_EXT2=y
+CONFIG_CMD_EXT4=y
+CONFIG_CMD_EXT4_WRITE=y
+CONFIG_CMD_FAT=y
+CONFIG_CMD_FS_GENERIC=y
+CONFIG_SPI_FLASH=y
+CONFIG_SPI_FLASH_STMICRO=y
+CONFIG_USB=y
+CONFIG_USB_STORAGE=y
+CONFIG_OF_LIBFDT=y
diff --git a/include/configs/tqma6.h b/include/configs/tqma6.h
index 2a63686..e72332c 100644
--- a/include/configs/tqma6.h
+++ b/include/configs/tqma6.h
@@ -1,7 +1,7 @@
/*
- * Copyright (C) 2013, 2014 Markus Niebel <Markus.Niebel@tq-group.com>
+ * Copyright (C) 2013, 2014, 2017 Markus Niebel <Markus.Niebel@tq-group.com>
*
- * Configuration settings for the TQ Systems TQMa6<Q,S> module.
+ * Configuration settings for the TQ Systems TQMa6<Q,D,DL,S> module.
*
* SPDX-License-Identifier: GPL-2.0+
*/
@@ -20,7 +20,7 @@
/* place code in last 4 MiB of RAM */
#if defined(CONFIG_TQMA6S)
#define CONFIG_SYS_TEXT_BASE 0x2fc00000
-#elif defined(CONFIG_TQMA6Q)
+#elif defined(CONFIG_TQMA6Q) || defined(CONFIG_TQMA6DL)
#define CONFIG_SYS_TEXT_BASE 0x4fc00000
#endif
@@ -28,8 +28,10 @@
#if defined(CONFIG_TQMA6S)
#define PHYS_SDRAM_SIZE (512u * SZ_1M)
+#elif defined(CONFIG_TQMA6DL)
+#define PHYS_SDRAM_SIZE (SZ_1G)
#elif defined(CONFIG_TQMA6Q)
-#define PHYS_SDRAM_SIZE (1024u * SZ_1M)
+#define PHYS_SDRAM_SIZE (SZ_1G)
#endif
#define CONFIG_MXC_UART
diff --git a/include/configs/tqma6_mba6.h b/include/configs/tqma6_mba6.h
index 265aa4a..3d6e438 100644
--- a/include/configs/tqma6_mba6.h
+++ b/include/configs/tqma6_mba6.h
@@ -1,7 +1,8 @@
/*
- * Copyright (C) 2013 - 2015 Markus Niebel <Markus.Niebel@tq-group.com>
+ * Copyright (C) 2013 - 2017 Markus Niebel <Markus.Niebel@tq-group.com>
*
- * Configuration settings for the TQ Systems TQMa6<Q,S> module.
+ * Configuration settings for the TQ Systems TQMa6<Q,D,DL,S> module on
+ * MBa6 starter kit
*
* SPDX-License-Identifier: GPL-2.0+
*/