ARM: dts: ast2600: Disable I2C nodes by default
Allow boards to enable the buses they use.
Signed-off-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Ryan Chen <ryan_chen@aspeedtech.com>
diff --git a/arch/arm/dts/ast2600.dtsi b/arch/arm/dts/ast2600.dtsi
index 4b23d25..a37d062 100644
--- a/arch/arm/dts/ast2600.dtsi
+++ b/arch/arm/dts/ast2600.dtsi
@@ -868,6 +868,7 @@
clocks = <&scu ASPEED_CLK_APB2>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c3_default>;
+ status = "disabled";
};
i2c3: i2c@200 {
@@ -883,6 +884,7 @@
clocks = <&scu ASPEED_CLK_APB2>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c4_default>;
+ status = "disabled";
};
i2c4: i2c@280 {
@@ -898,6 +900,7 @@
clocks = <&scu ASPEED_CLK_APB2>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c5_default>;
+ status = "disabled";
};
i2c5: i2c@300 {
@@ -913,6 +916,7 @@
clocks = <&scu ASPEED_CLK_APB2>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c6_default>;
+ status = "disabled";
};
i2c6: i2c@380 {
@@ -928,6 +932,7 @@
clocks = <&scu ASPEED_CLK_APB2>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c7_default>;
+ status = "disabled";
};
i2c7: i2c@400 {
@@ -943,6 +948,7 @@
clocks = <&scu ASPEED_CLK_APB2>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c8_default>;
+ status = "disabled";
};
i2c8: i2c@480 {
@@ -958,6 +964,7 @@
clocks = <&scu ASPEED_CLK_APB2>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c9_default>;
+ status = "disabled";
};
i2c9: i2c@500 {