diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index e385eda..e97f94d 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -287,9 +287,6 @@
 config TARGET_NHK8815
 	bool "Support nhk8815"
 
-config TARGET_OMAP5912OSK
-	bool "Support omap5912osk"
-
 config TARGET_EDMINIV2
 	bool "Support edminiv2"
 
@@ -977,7 +974,6 @@
 source "board/ti/dra7xx/Kconfig"
 source "board/ti/evm/Kconfig"
 source "board/ti/ks2_evm/Kconfig"
-source "board/ti/omap5912osk/Kconfig"
 source "board/ti/omap5_uevm/Kconfig"
 source "board/ti/panda/Kconfig"
 source "board/ti/sdp3430/Kconfig"
diff --git a/board/ti/omap5912osk/Kconfig b/board/ti/omap5912osk/Kconfig
deleted file mode 100644
index 9f7493a..0000000
--- a/board/ti/omap5912osk/Kconfig
+++ /dev/null
@@ -1,23 +0,0 @@
-if TARGET_OMAP5912OSK
-
-config SYS_CPU
-	string
-	default "arm926ejs"
-
-config SYS_BOARD
-	string
-	default "omap5912osk"
-
-config SYS_VENDOR
-	string
-	default "ti"
-
-config SYS_SOC
-	string
-	default "omap"
-
-config SYS_CONFIG_NAME
-	string
-	default "omap5912osk"
-
-endif
diff --git a/board/ti/omap5912osk/MAINTAINERS b/board/ti/omap5912osk/MAINTAINERS
deleted file mode 100644
index 43ffb9b..0000000
--- a/board/ti/omap5912osk/MAINTAINERS
+++ /dev/null
@@ -1,6 +0,0 @@
-OMAP5912OSK BOARD
-M:	Rishi Bhattacharya <rishi@ti.com>
-S:	Maintained
-F:	board/ti/omap5912osk/
-F:	include/configs/omap5912osk.h
-F:	configs/omap5912osk_defconfig
diff --git a/board/ti/omap5912osk/Makefile b/board/ti/omap5912osk/Makefile
deleted file mode 100644
index d7c0ebd..0000000
--- a/board/ti/omap5912osk/Makefile
+++ /dev/null
@@ -1,9 +0,0 @@
-#
-# (C) Copyright 2000-2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# SPDX-License-Identifier:	GPL-2.0+
-#
-
-obj-y	:= omap5912osk.o
-obj-y	+= lowlevel_init.o
diff --git a/board/ti/omap5912osk/config.mk b/board/ti/omap5912osk/config.mk
deleted file mode 100644
index 5b8d952..0000000
--- a/board/ti/omap5912osk/config.mk
+++ /dev/null
@@ -1,30 +0,0 @@
-#
-# (C) Copyright 2002-2004
-# Gary Jennejohn, DENX Software Engineering, <garyj@denx.de>
-# David Mueller, ELSOFT AG, <d.mueller@elsoft.ch>
-#
-# (C) Copyright 2003
-# Texas Instruments, <www.ti.com>
-# Kshitij Gupta <Kshitij@ti.com>
-#
-# (C) Copyright 2004
-# Texas Instruments, <www.ti.com>
-# Rishi Bhattacharya <rishi@ti.com>
-#
-# TI OSK board with OMAP5912 (ARM925EJS) cpu
-# see http://www.ti.com/ for more information on Texas Instruments
-#
-# OSK has 1 bank of 32 MB SDRAM
-# Physical Address:
-# 1000'0000 to 1200'0000
-#
-#
-# Linux-Kernel is expected to be at 1000'8000, entry 1000'8000
-# (mem base + reserved)
-#
-# When running from RAM use address 1108'0000, otherwise when
-# booting from NOR flash link to address 0000'0000.
-#
-
-CONFIG_SYS_TEXT_BASE = 0x00000000
-#CONFIG_SYS_TEXT_BASE = 0x11080000
diff --git a/board/ti/omap5912osk/lowlevel_init.S b/board/ti/omap5912osk/lowlevel_init.S
deleted file mode 100644
index e05a1c7..0000000
--- a/board/ti/omap5912osk/lowlevel_init.S
+++ /dev/null
@@ -1,477 +0,0 @@
-/*
- * Board specific setup info
- *
- * (C) Copyright 2003
- * Texas Instruments, <www.ti.com>
- * Kshitij Gupta <Kshitij@ti.com>
- *
- * Modified for OMAP 1610 H2 board by Nishant Kamat, Jan 2004
- *
- * Modified for OMAP 5912 OSK board by Rishi Bhattacharya, Apr 2004
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <config.h>
-#include <version.h>
-
-#if defined(CONFIG_OMAP1610)
-#include <./configs/omap1510.h>
-#endif
-
-.globl lowlevel_init
-lowlevel_init:
-
-	/*------------------------------------------------------*
-	 * Ensure i-cache is enabled                            *
-	 * To configure TC regs without fetching instruction    *
-	 *------------------------------------------------------*/
-	mrc	p15, 0, r0, c1, c0
-	orr	r0, r0, #0x1000
-	mcr	p15, 0, r0, c1, c0
-
-	/*------------------------------------------------------*
-	 *mask all IRQs by setting all bits in the INTMR default*
-	 *------------------------------------------------------*/
-	mov	r1, #0xffffffff
-	ldr	r0, =REG_IHL1_MIR
-	str	r1, [r0]
-	ldr	r0, =REG_IHL2_MIR
-	str	r1, [r0]
-
-	/*------------------------------------------------------*
-	 * Set up ARM CLM registers (IDLECT1)                   *
-	 *------------------------------------------------------*/
-	ldr	r0,	REG_ARM_IDLECT1
-	ldr	r1,	VAL_ARM_IDLECT1
-	str	r1,	[r0]
-
-	/*------------------------------------------------------*
-	 * Set up ARM CLM registers (IDLECT2)                   *
-	 *------------------------------------------------------*/
-	ldr	r0,	REG_ARM_IDLECT2
-	ldr	r1,	VAL_ARM_IDLECT2
-	str	r1,	[r0]
-
-	/*------------------------------------------------------*
-	 * Set up ARM CLM registers (IDLECT3)                   *
-	 *------------------------------------------------------*/
-	ldr	r0,	REG_ARM_IDLECT3
-	ldr	r1,	VAL_ARM_IDLECT3
-	str	r1,	[r0]
-
-	mov	r1,	#0x01               /* PER_EN bit */
-	ldr	r0,	REG_ARM_RSTCT2
-	strh	r1,	[r0]            /* CLKM; Peripheral reset. */
-
-	/* Set CLKM to Sync-Scalable */
-	mov	r1,	#0x1000
-	ldr	r0,	REG_ARM_SYSST
-
-	mov	r2,	#0
-1:	cmp	r2,	#1
-	streqh	r1,	[r0]
-	add	r2,	r2,	#1
-	cmp	r2,	#0x100              /* wait for any bubbles to finish */
-	bne	1b
-
-	ldr	r1,	VAL_ARM_CKCTL
-	ldr	r0,	REG_ARM_CKCTL
-	strh	r1,	[r0]
-
-	/* a few nops to let settle */
-	nop
-	nop
-	nop
-	nop
-	nop
-	nop
-	nop
-	nop
-	nop
-	nop
-
-	/* setup DPLL 1 */
-	/* Ramp up the clock to 96Mhz */
-	ldr	r1,	VAL_DPLL1_CTL
-	ldr	r0,	REG_DPLL1_CTL
-	strh	r1,	[r0]
-	ands	r1,	r1,	#0x10       /* Check if PLL is enabled. */
-	beq	lock_end                /* Do not look for lock if BYPASS selected */
-2:
-	ldrh	r1,	[r0]
-	ands	r1,	r1,	#0x01       /* Check the LOCK bit.*/
-	beq 2b                      /* loop until bit goes hi. */
-lock_end:
-
-	/*------------------------------------------------------*
-	 * Turn off the watchdog during init...                 *
-	 *------------------------------------------------------*/
-	ldr	r0,	REG_WATCHDOG
-	ldr	r1,	WATCHDOG_VAL1
-	str	r1,	[r0]
-	ldr	r1,	WATCHDOG_VAL2
-	str	r1,	[r0]
-	ldr	r0,	REG_WSPRDOG
-	ldr	r1,	WSPRDOG_VAL1
-	str	r1,	[r0]
-	ldr	r0,	REG_WWPSDOG
-
-watch1Wait:
-	ldr	r1,	[r0]
-	tst	r1,	#0x10
-	bne	watch1Wait
-
-	ldr	r0,	REG_WSPRDOG
-	ldr	r1,	WSPRDOG_VAL2
-	str	r1,	[r0]
-	ldr	r0,	REG_WWPSDOG
-watch2Wait:
-	ldr	r1,	[r0]
-	tst	r1,	#0x10
-	bne	watch2Wait
-
-	/* Set memory timings corresponding to the new clock speed */
-	ldr	r3, VAL_SDRAM_CONFIG_SDF0
-
-	/* Check execution location to determine current execution location
-	 * and branch to appropriate initialization code.
-	 */
-	mov	r0,	#0x10000000         /* Load physical SDRAM base. */
-	mov	r1,	pc                  /* Get current execution location. */
-	cmp	r1,	r0                  /* Compare. */
-	bge	skip_sdram              /* Skip over EMIF-fast initialization if running from SDRAM. */
-
-	/* identify the device revision, -- TMX or TMP(TMS) */
-	ldr	r0, REG_DEVICE_ID
-	ldr	r1, [r0]
-
-	ldr	r0, VAL_DEVICE_ID_TMP
-	mov	r1, r1, lsl #15
-	mov	r1, r1, lsr #16
-	cmp	r0, r1
-	bne	skip_TMP_Patch
-
-	/* Enable TMP/TMS device new features */
-	mov	r0, #1
-	ldr	r1, REG_TC_EMIFF_DOUBLER
-	str	r0, [r1]
-
-	/* Enable new ac parameters */
-	mov	r0, #0x0b
-	ldr	r1, REG_SDRAM_CONFIG2
-	str	r0, [r1]
-
-	ldr	r3, VAL_SDRAM_CONFIG_SDF1
-
-skip_TMP_Patch:
-
-	/*
-	* Delay for SDRAM initialization.
-	*/
-	mov	r0,	#0x1800		/* value should be checked */
-3:
-	subs	r0,	r0,	#0x1	/* Decrement count */
-	bne	3b
-
-	/*
-	 * Set SDRAM control values. Disable refresh before MRS command.
-	 */
-
-	/* mobile ddr operation */
-	ldr	r0,	REG_SDRAM_OPERATION
-	mov	r2,	#07
-	str	r2,	[r0]
-
-	/* config register */
-	ldr	r0,	REG_SDRAM_CONFIG
-	str	r3,	[r0]
-
-	/* manual command register */
-	ldr	r0,	REG_SDRAM_MANUAL_CMD
-
-	/* issue set cke high */
-	mov	r1,	#CMD_SDRAM_CKE_SET_HIGH
-	str	r1,	[r0]
-
-	/* issue nop */
-	mov	r1,	#CMD_SDRAM_NOP
-	str	r1,	[r0]
-
-	mov	r2,	#0x0100
-waitMDDR1:
-	subs	r2,	r2,	 #1
-	bne	waitMDDR1	/* delay loop */
-
-	/* issue precharge */
-	mov	r1,	#CMD_SDRAM_PRECHARGE
-	str	r1,	[r0]
-
-	/* issue autorefresh x 2 */
-	mov	r1,	#CMD_SDRAM_AUTOREFRESH
-	str	r1,	[r0]
-	str	r1,	[r0]
-
-	/* mrs register ddr mobile */
-	ldr	r0,	REG_SDRAM_MRS
-	mov	r1,	#0x33
-	str	r1,	[r0]
-
-	/* emrs1 low-power register */
-	ldr	r0,	REG_SDRAM_EMRS1
-	/* self refresh on all banks */
-	mov	r1,	#0
-	str	r1,	[r0]
-
-	ldr	r0,	REG_DLL_URD_CONTROL
-	ldr	r1,	DLL_URD_CONTROL_VAL
-	str	r1,	[r0]
-
-	ldr	r0,	REG_DLL_LRD_CONTROL
-	ldr	r1,	DLL_LRD_CONTROL_VAL
-	str	r1,	[r0]
-
-	ldr	r0,	REG_DLL_WRT_CONTROL
-	ldr	r1,	DLL_WRT_CONTROL_VAL
-	str	r1,	[r0]
-
-	/* delay loop */
-	mov	r0,	#0x0100
-waitMDDR2:
-	subs	r0,	r0,	#1
-	bne	waitMDDR2
-
-	/*
-	 * Delay for SDRAM initialization.
-	 */
-	mov	r0,	#0x1800
-4:
-	subs	r0,	r0,	#1	/* Decrement count. */
-	bne	4b
-	b	common_tc
-
-skip_sdram:
-	ldr	r0,	REG_SDRAM_CONFIG
-	str	r3,	[r0]
-
-common_tc:
-	/* slow interface */
-	ldr	r1,	VAL_TC_EMIFS_CS0_CONFIG
-	ldr	r0,	REG_TC_EMIFS_CS0_CONFIG
-	str	r1,	[r0] /* Chip Select 0 */
-
-	ldr	r1,	VAL_TC_EMIFS_CS1_CONFIG
-	ldr	r0,	REG_TC_EMIFS_CS1_CONFIG
-	str	r1,	[r0] /* Chip Select 1 */
-
-	ldr	r1,	VAL_TC_EMIFS_CS3_CONFIG
-	ldr	r0,	REG_TC_EMIFS_CS3_CONFIG
-	str	r1,	[r0] /* Chip Select 3 */
-
-	ldr	r1,	VAL_TC_EMIFS_DWS
-	ldr	r0,	REG_TC_EMIFS_DWS
-	str	r1,	[r0] /* Enable EMIFS.RDY for CS1 (ether) */
-
-#ifdef CONFIG_H2_OMAP1610
-	/* inserting additional 2 clock cycle hold time for LAN */
-	ldr     r0,     REG_TC_EMIFS_CS1_ADVANCED
-	ldr	r1,     VAL_TC_EMIFS_CS1_ADVANCED
-	str     r1,     [r0]
-#endif
-	/* Start MPU Timer 1 */
-	ldr	r0,	REG_MPU_LOAD_TIMER
-	ldr	r1,	VAL_MPU_LOAD_TIMER
-	str	r1,	[r0]
-
-	ldr	r0,	REG_MPU_CNTL_TIMER
-	ldr	r1,	VAL_MPU_CNTL_TIMER
-	str	r1,	[r0]
-
-	/*
-	 * Setup a temporary stack
-	 */
-	ldr	sp,	SRAM_STACK
-	bic	sp, sp, #7 /* 8-byte alignment for ABI compliance */
-
-	/*
-	 * Save the old lr(passed in ip) and the current lr to stack
-	 */
-	push	{ip, lr}
-
-	/*
-	 * go setup pll, mux, memory
-	 */
-	bl	s_init
-	pop	{ip, pc}
-
-	/* back to arch calling code */
-	mov	pc,	lr
-
-	/* the literal pools origin */
-	.ltorg
-
-REG_DEVICE_ID:			/* 32 bits */
-	.word 0xfffe2004
-REG_TC_EMIFS_CONFIG:
-	.word 0xfffecc0c
-REG_TC_EMIFS_CS0_CONFIG:	/* 32 bits */
-	.word 0xfffecc10
-REG_TC_EMIFS_CS1_CONFIG:	/* 32 bits */
-	.word 0xfffecc14
-REG_TC_EMIFS_CS2_CONFIG:	/* 32 bits */
-	.word 0xfffecc18
-REG_TC_EMIFS_CS3_CONFIG:	/* 32 bits */
-	.word 0xfffecc1c
-REG_TC_EMIFS_DWS:		/* 32 bits */
-	.word 0xfffecc40
-#ifdef CONFIG_H2_OMAP1610
-REG_TC_EMIFS_CS1_ADVANCED:	/* 32 bits */
-	.word 0xfffecc54
-#endif
-
-/* MPU clock/reset/power mode control registers */
-REG_ARM_CKCTL:			/* 16 bits */
-	.word 0xfffece00
-REG_ARM_IDLECT3:		/* 16 bits */
-	.word 0xfffece24
-REG_ARM_IDLECT2:		/* 16 bits */
-	.word 0xfffece08
-REG_ARM_IDLECT1:		/* 16 bits */
-	.word 0xfffece04
-REG_ARM_RSTCT2:			/* 16 bits */
-	.word 0xfffece14
-REG_ARM_SYSST:			/* 16 bits */
-	.word 0xfffece18
-
-/* DPLL control registers */
-REG_DPLL1_CTL:			/* 16 bits */
-	.word 0xfffecf00
-
-/* Watch Dog register */
-/* secure watchdog stop */
-REG_WSPRDOG:
-	.word 0xfffeb048
-/* watchdog write pending */
-REG_WWPSDOG:
-	.word 0xfffeb034
-
-WSPRDOG_VAL1:
-	.word 0x0000aaaa
-WSPRDOG_VAL2:
-	.word 0x00005555
-
-/* SDRAM config is: auto refresh enabled, 16 bit 4 bank,
- counter @8192 rows, 10 ns, 8 burst */
-REG_SDRAM_CONFIG:
-	.word 0xfffecc20
-REG_SDRAM_CONFIG2:
-	.word 0xfffecc3c
-REG_TC_EMIFF_DOUBLER:		/* 32 bits */
-	.word 0xfffecc60
-
-/* Operation register */
-REG_SDRAM_OPERATION:
-	.word 0xfffecc80
-
-/* Manual command register */
-REG_SDRAM_MANUAL_CMD:
-	.word 0xfffecc84
-
-/* SDRAM MRS (New) config is: CAS latency is 2, burst length 8 */
-REG_SDRAM_MRS:
-	.word 0xfffecc70
-
-/* SDRAM MRS (New) config is: CAS latency is 2, burst length 8 */
-REG_SDRAM_EMRS1:
-	.word 0xfffecc78
-
-/* WRT DLL register */
-REG_DLL_WRT_CONTROL:
-	.word 0xfffecc68
-DLL_WRT_CONTROL_VAL:
-	.word 0x03f00002    /* Phase of 72deg, write offset +31  */
-
-/* URD DLL register */
-REG_DLL_URD_CONTROL:
-	.word 0xfffeccc0
-DLL_URD_CONTROL_VAL:
-	.word 0x00800002    /* Phase of 72deg, read offset +31  */
-
-/* LRD DLL register */
-REG_DLL_LRD_CONTROL:
-	.word 0xfffecccc
-DLL_LRD_CONTROL_VAL:
-	.word 0x00800002    /* read offset +31  */
-
-REG_WATCHDOG:
-	.word 0xfffec808
-WATCHDOG_VAL1:
-	.word 0x000000f5
-WATCHDOG_VAL2:
-	.word 0x000000a0
-
-REG_MPU_LOAD_TIMER:
-	.word 0xfffec504
-REG_MPU_CNTL_TIMER:
-	.word 0xfffec500
-VAL_MPU_LOAD_TIMER:
-	.word 0xffffffff
-VAL_MPU_CNTL_TIMER:
-	.word 0xffffffa1
-
-/* 96 MHz Samsung Mobile DDR */
-/* Original setting for TMX device */
-VAL_SDRAM_CONFIG_SDF0:
-    .word 0x0014e6fe
-
-/* NEW_SYS_FREQ mode (valid only TMP/TMS devices) */
-VAL_SDRAM_CONFIG_SDF1:
-    .word 0x0114e6fe
-
-VAL_ARM_CKCTL:
-	.word 0x2000		/* was:	0x3000, now use CLK_REF for timer input */
-VAL_DPLL1_CTL:
-	.word 0x2830
-
-#ifdef CONFIG_OSK_OMAP5912
-VAL_TC_EMIFS_CS0_CONFIG:
-	.word 0x002130b0
-VAL_TC_EMIFS_CS1_CONFIG:
-	.word 0x00001133
-VAL_TC_EMIFS_CS2_CONFIG:
-	.word 0x000055f0
-VAL_TC_EMIFS_CS3_CONFIG:
-	.word 0x88013141
-VAL_TC_EMIFS_DWS:	/* Enable EMIFS.RDY for CS1 access (ether) */
-	.word 0x000000c0
-VAL_DEVICE_ID_TMP:	/* TMP/TMS=0xb65f, TMX=0xb58c */
-	.word 0xb65f
-#endif
-
-#ifdef CONFIG_H2_OMAP1610
-VAL_TC_EMIFS_CS0_CONFIG:
-	.word 0x00203331
-VAL_TC_EMIFS_CS1_CONFIG:
-	.word 0x8180fff3
-VAL_TC_EMIFS_CS2_CONFIG:
-	.word 0xf800f22a
-VAL_TC_EMIFS_CS3_CONFIG:
-	.word 0x88013141
-VAL_TC_EMIFS_CS1_ADVANCED:
-	.word 0x00000022
-#endif
-
-VAL_ARM_IDLECT1:
-	.word 0x00000400
-VAL_ARM_IDLECT2:
-	.word 0x00000886
-VAL_ARM_IDLECT3:
-	.word 0x00000015
-
-SRAM_STACK:
-	.word CONFIG_SYS_INIT_SP_ADDR
-
-/* command values */
-.equ CMD_SDRAM_NOP,             0x00000000
-.equ CMD_SDRAM_PRECHARGE,       0x00000001
-.equ CMD_SDRAM_AUTOREFRESH,     0x00000002
-.equ CMD_SDRAM_CKE_SET_HIGH,    0x00000007
diff --git a/board/ti/omap5912osk/omap5912osk.c b/board/ti/omap5912osk/omap5912osk.c
deleted file mode 100644
index 88a7310..0000000
--- a/board/ti/omap5912osk/omap5912osk.c
+++ /dev/null
@@ -1,307 +0,0 @@
-/*
- * (C) Copyright 2002
- * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
- * Marius Groeger <mgroeger@sysgo.de>
- *
- * (C) Copyright 2002
- * David Mueller, ELSOFT AG, <d.mueller@elsoft.ch>
- *
- * (C) Copyright 2003
- * Texas Instruments, <www.ti.com>
- * Kshitij Gupta <Kshitij@ti.com>
- *
- * (C) Copyright 2004
- * Texas Instruments, <www.ti.com>
- * Rishi Bhattacharya <rishi@ti.com>
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <common.h>
-#include <netdev.h>
-#if defined(CONFIG_OMAP1610)
-#include <./configs/omap1510.h>
-#endif
-
-DECLARE_GLOBAL_DATA_PTR;
-
-void flash__init (void);
-void ether__init (void);
-void set_muxconf_regs (void);
-void peripheral_power_enable (void);
-
-#define COMP_MODE_ENABLE ((unsigned int)0x0000EAEF)
-
-static inline void delay (unsigned long loops)
-{
-	__asm__ volatile ("1:\n"
-		"subs %0, %1, #1\n"
-		"bne 1b":"=r" (loops):"0" (loops));
-}
-
-/*
- * Miscellaneous platform dependent initialisations
- */
-
-int board_init (void)
-{
-	gd->bd->bi_arch_number = MACH_TYPE_OMAP_OSK;
-
-	/* adress of boot parameters */
-	gd->bd->bi_boot_params = 0x10000100;
-
-	flash__init();
-	ether__init();
-
-	return 0;
-}
-
-void s_init(void)
-{
-	/* Configure MUX settings */
-	set_muxconf_regs ();
-	peripheral_power_enable ();
-
-/* this speeds up your boot a quite a bit.  However to make it
- *  work, you need make sure your kernel startup flush bug is fixed.
- *  ... rkw ...
- */
-	icache_enable ();
-}
-
-/******************************
- Routine:
- Description:
-******************************/
-void flash__init (void)
-{
-#define EMIFS_GlB_Config_REG 0xfffecc0c
-	unsigned int regval;
-	regval = *((volatile unsigned int *) EMIFS_GlB_Config_REG);
-	/* Turn off write protection for flash devices. */
-	regval = regval | 0x0001;
-	*((volatile unsigned int *) EMIFS_GlB_Config_REG) = regval;
-}
-/*************************************************************
- Routine:ether__init
- Description: take the Ethernet controller out of reset and wait
-			   for the EEPROM load to complete.
-*************************************************************/
-void ether__init (void)
-{
-#define ETH_CONTROL_REG 0x0480000b
-	int i;
-
-	*((volatile unsigned short *) 0xfffece08) = 0x03FF;
-	*((volatile unsigned short *) 0xfffb3824) = 0x8000;
-	*((volatile unsigned short *) 0xfffb3830) = 0x0000;
-	*((volatile unsigned short *) 0xfffb3834) = 0x0009;
-	*((volatile unsigned short *) 0xfffb3838) = 0x0009;
-	*((volatile unsigned short *) 0xfffb3818) = 0x0002;
-	*((volatile unsigned short *) 0xfffb382C) = 0x0048;
-	*((volatile unsigned short *) 0xfffb3824) = 0x8603;
-	udelay (3);
-	for (i=0;i<2000;i++);
-	*((volatile unsigned short *) 0xfffb381C) = 0x6610;
-	udelay (30);
-	for (i=0;i<10000;i++);
-
-	*((volatile unsigned char *) ETH_CONTROL_REG) &= ~0x01;
-	udelay (3);
-
-
-}
-
-/******************************
- Routine:
- Description:
-******************************/
-int dram_init(void)
-{
-	gd->ram_size = get_ram_size((long *)PHYS_SDRAM_1, PHYS_SDRAM_1_SIZE);
-
-	return 0;
-}
-
-void dram_init_banksize(void)
-{
-	gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
-	gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
-}
-
-/******************************************************
- Routine: set_muxconf_regs
- Description: Setting up the configuration Mux registers
-			  specific to the hardware
-*******************************************************/
-void set_muxconf_regs (void)
-{
-	volatile unsigned int *MuxConfReg;
-	/* set each registers to its reset value; */
-	MuxConfReg =
-		(volatile unsigned int *) ((unsigned int) FUNC_MUX_CTRL_0);
-	/* setup for UART1 */
-	*MuxConfReg &= ~(0x02000000);	/* bit 25 */
-	/* setup for UART2 */
-	*MuxConfReg &= ~(0x01000000);	/* bit 24 */
-	/* Disable Uwire CS Hi-Z */
-	*MuxConfReg |= 0x08000000;
-	MuxConfReg =
-		(volatile unsigned int *) ((unsigned int) FUNC_MUX_CTRL_3);
-	*MuxConfReg = 0x00000000;
-	MuxConfReg =
-		(volatile unsigned int *) ((unsigned int) FUNC_MUX_CTRL_4);
-	*MuxConfReg = 0x00000000;
-	MuxConfReg =
-		(volatile unsigned int *) ((unsigned int) FUNC_MUX_CTRL_5);
-	*MuxConfReg = 0x00000000;
-	MuxConfReg =
-		(volatile unsigned int *) ((unsigned int) FUNC_MUX_CTRL_6);
-	/*setup mux for UART3 */
-	*MuxConfReg |= 0x00000001;	/* bit3, 1, 0 (mux0 5,5,26) */
-	*MuxConfReg &= ~0x0000003e;
-	MuxConfReg =
-		(volatile unsigned int *) ((unsigned int) FUNC_MUX_CTRL_7);
-	*MuxConfReg = 0x00000000;
-	MuxConfReg =
-		(volatile unsigned int *) ((unsigned int) FUNC_MUX_CTRL_8);
-	/* Disable Uwire CS Hi-Z */
-	*MuxConfReg |= 0x00001200;	/*bit 9 for CS0 12 for CS3 */
-	MuxConfReg =
-		(volatile unsigned int *) ((unsigned int) FUNC_MUX_CTRL_9);
-	/*  Need to turn on bits 21 and 12 in FUNC_MUX_CTRL_9 so the  */
-	/*  hardware will actually use TX and RTS based on bit 25 in  */
-	/*  FUNC_MUX_CTRL_0.  I told you this thing was screwy!	 */
-	*MuxConfReg |= 0x00201000;
-	MuxConfReg =
-		(volatile unsigned int *) ((unsigned int) FUNC_MUX_CTRL_A);
-	*MuxConfReg = 0x00000000;
-	MuxConfReg =
-		(volatile unsigned int *) ((unsigned int) FUNC_MUX_CTRL_B);
-	*MuxConfReg = 0x00000000;
-	MuxConfReg =
-		(volatile unsigned int *) ((unsigned int) FUNC_MUX_CTRL_C);
-	/* setup for UART2 */
-	/*  Need to turn on bits 27 and 24 in FUNC_MUX_CTRL_C so the  */
-	/*  hardware will actually use TX and RTS based on bit 24 in  */
-	/*  FUNC_MUX_CTRL_0. */
-	*MuxConfReg |= 0x09000000;
-	MuxConfReg =
-	(volatile unsigned int *) ((unsigned int) FUNC_MUX_CTRL_D);
-	*MuxConfReg |= 0x00000020;
-	MuxConfReg =
-		(volatile unsigned int *) ((unsigned int) PULL_DWN_CTRL_0);
-	*MuxConfReg = 0x00000000;
-	MuxConfReg =
-		(volatile unsigned int *) ((unsigned int) PULL_DWN_CTRL_1);
-	*MuxConfReg = 0x00000000;
-	/* mux setup for SD/MMC driver */
-	MuxConfReg =
-		(volatile unsigned int *) ((unsigned int) PULL_DWN_CTRL_2);
-	*MuxConfReg &= 0xFFFE0FFF;
-	MuxConfReg =
-		(volatile unsigned int *) ((unsigned int) PULL_DWN_CTRL_3);
-	*MuxConfReg = 0x00000000;
-	MuxConfReg =
-		(volatile unsigned int *) ((unsigned int) MOD_CONF_CTRL_0);
-	/* bit 13 for MMC2 XOR_CLK */
-	*MuxConfReg &= ~(0x00002000);
-	/* bit 29 for UART 1 */
-	*MuxConfReg &= ~(0x00002000);
-	MuxConfReg =
-		(volatile unsigned int *) ((unsigned int) FUNC_MUX_CTRL_0);
-	/* Configure for USB. Turn on VBUS_CTRL and VBUS_MODE. */
-	*MuxConfReg |= 0x000C0000;
-	MuxConfReg =
-		(volatile unsigned int *) ((unsigned int)USB_TRANSCEIVER_CTRL);
-	*MuxConfReg &= ~(0x00000070);
-	*MuxConfReg &= ~(0x00000008);
-	*MuxConfReg |= 0x00000003;
-	*MuxConfReg |= 0x00000180;
-	MuxConfReg =
-		(volatile unsigned int *) ((unsigned int) MOD_CONF_CTRL_0);
-	/* bit 17, software controls VBUS */
-	*MuxConfReg &= ~(0x00020000);
-	/* Enable USB 48 and 12M clocks */
-	*MuxConfReg |= 0x00000200;
-	*MuxConfReg &= ~(0x00000180);
-	/*2.75V for MMCSDIO1 */
-	MuxConfReg =
-		(volatile unsigned int *) ((unsigned int) VOLTAGE_CTRL_0);
-	*MuxConfReg = 0x00001FE7;
-	MuxConfReg =
-		(volatile unsigned int *) ((unsigned int) PU_PD_SEL_0);
-	*MuxConfReg = 0x00000000;
-	MuxConfReg =
-		(volatile unsigned int *) ((unsigned int) PU_PD_SEL_1);
-	*MuxConfReg = 0x00000000;
-	MuxConfReg =
-		(volatile unsigned int *) ((unsigned int) PU_PD_SEL_2);
-	*MuxConfReg = 0x00000000;
-	MuxConfReg =
-		(volatile unsigned int *) ((unsigned int) PU_PD_SEL_3);
-	*MuxConfReg = 0x00000000;
-	MuxConfReg =
-		(volatile unsigned int *) ((unsigned int) PU_PD_SEL_4);
-	*MuxConfReg = 0x00000000;
-	MuxConfReg =
-		(volatile unsigned int *) ((unsigned int) PULL_DWN_CTRL_4);
-	*MuxConfReg = 0x00000000;
-	/* Turn on UART2 48 MHZ clock */
-	MuxConfReg =
-		(volatile unsigned int *) ((unsigned int) MOD_CONF_CTRL_0);
-	*MuxConfReg |= 0x40000000;
-	MuxConfReg =
-		(volatile unsigned int *) ((unsigned int) USB_OTG_CTRL);
-	/* setup for USB VBus detection OMAP161x */
-	*MuxConfReg |= 0x00040000;	/* bit 18 */
-	MuxConfReg =
-		(volatile unsigned int *) ((unsigned int) PU_PD_SEL_2);
-	/* PullUps for SD/MMC driver */
-	*MuxConfReg |= ~(0xFFFE0FFF);
-	MuxConfReg =
-		(volatile unsigned int *) ((unsigned int)COMP_MODE_CTRL_0);
-	*MuxConfReg = COMP_MODE_ENABLE;
-}
-
-/******************************************************
- Routine: peripheral_power_enable
- Description: Enable the power for UART1
-*******************************************************/
-void peripheral_power_enable (void)
-{
-#define UART1_48MHZ_ENABLE	((unsigned short)0x0200)
-#define SW_CLOCK_REQUEST	((volatile unsigned short *)0xFFFE0834)
-
-	*SW_CLOCK_REQUEST |= UART1_48MHZ_ENABLE;
-}
-
-/*
- * Check Board Identity
- */
-int checkboard(void)
-{
-	char buf[64];
-	int i = getenv_f("serial#", buf, sizeof(buf));
-
-	puts("Board: OSK5912");
-
-	if (i > 0) {
-		puts(", serial# ");
-		puts(buf);
-	}
-	putc('\n');
-
-	return (0);
-}
-
-#ifdef CONFIG_CMD_NET
-int board_eth_init(bd_t *bis)
-{
-	int rc = 0;
-#ifdef CONFIG_LAN91C96
-	rc = lan91c96_initialize(0, CONFIG_LAN91C96_BASE);
-#endif
-	return rc;
-}
-#endif
diff --git a/configs/omap5912osk_defconfig b/configs/omap5912osk_defconfig
deleted file mode 100644
index 5aeb097..0000000
--- a/configs/omap5912osk_defconfig
+++ /dev/null
@@ -1,2 +0,0 @@
-CONFIG_ARM=y
-CONFIG_TARGET_OMAP5912OSK=y
diff --git a/doc/README.scrapyard b/doc/README.scrapyard
index b950a41..6f28ab0 100644
--- a/doc/README.scrapyard
+++ b/doc/README.scrapyard
@@ -12,6 +12,7 @@
 
 Board            Arch        CPU            Commit      Removed     Last known maintainer/contact
 =================================================================================================
+omap5912osk      arm         arm926ejs      -           -           Rishi Bhattacharya <rishi@ti.com>
 p1023rds         powerpc     mpc85xx        d0bc5140    2014-07-22  Roy Zang <tie-fei.zang@freescale.com>
 spc1920          powerpc     mpc8xx         98ad54be    2014-07-07
 v37              powerpc     mpc8xx         b8c1438a    2014-07-07
diff --git a/drivers/usb/gadget/Makefile b/drivers/usb/gadget/Makefile
index 4eea907..2efd5a4 100644
--- a/drivers/usb/gadget/Makefile
+++ b/drivers/usb/gadget/Makefile
@@ -31,7 +31,6 @@
 obj-y += core.o
 obj-y += ep0.o
 obj-$(CONFIG_DW_UDC) += designware_udc.o
-obj-$(CONFIG_OMAP1610) += omap1510_udc.o
 obj-$(CONFIG_MPC885_FAMILY) += mpc8xx_udc.o
 obj-$(CONFIG_CPU_PXA27X) += pxa27x_udc.o
 endif
diff --git a/drivers/usb/gadget/omap1510_udc.c b/drivers/usb/gadget/omap1510_udc.c
deleted file mode 100644
index 959df8c..0000000
--- a/drivers/usb/gadget/omap1510_udc.c
+++ /dev/null
@@ -1,1506 +0,0 @@
-/*
- * (C) Copyright 2003
- * Gerry Hamel, geh@ti.com, Texas Instruments
- *
- * Based on
- * linux/drivers/usb/device/bi/omap.c
- * TI OMAP1510 USB bus interface driver
- *
- * Author: MontaVista Software, Inc.
- *	   source@mvista.com
- *	   (C) Copyright 2002
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <common.h>
-#include <asm/io.h>
-#include <usbdevice.h>
-#include <usb/omap1510_udc.h>
-#include <usb/udc.h>
-
-#include "ep0.h"
-
-
-#define UDC_INIT_MDELAY		     80 /* Device settle delay */
-#define UDC_MAX_ENDPOINTS	     31 /* Number of endpoints on this UDC */
-
-/* Some kind of debugging output... */
-#if 1
-#define UDCDBG(str)
-#define UDCDBGA(fmt,args...)
-#else  /* The bugs still exists... */
-#define UDCDBG(str) serial_printf("[%s] %s:%d: " str "\n", __FILE__,__FUNCTION__,__LINE__)
-#define UDCDBGA(fmt,args...) serial_printf("[%s] %s:%d: " fmt "\n", __FILE__,__FUNCTION__,__LINE__, ##args)
-#endif
-
-#if 1
-#define UDCREG(name)
-#define UDCREGL(name)
-#else  /* The bugs still exists... */
-#define UDCREG(name)	 serial_printf("%s():%d: %s[%08x]=%.4x\n",__FUNCTION__,__LINE__, (#name), name, inw(name))	/* For 16-bit regs */
-#define UDCREGL(name)	 serial_printf("%s():%d: %s[%08x]=%.8x\n",__FUNCTION__,__LINE__, (#name), name, inl(name))	/* For 32-bit regs */
-#endif
-
-
-static struct urb *ep0_urb = NULL;
-
-static struct usb_device_instance *udc_device;	/* Used in interrupt handler */
-static u16 udc_devstat = 0;	/* UDC status (DEVSTAT) */
-static u32 udc_interrupts = 0;
-
-static void udc_stall_ep (unsigned int ep_addr);
-
-
-static struct usb_endpoint_instance *omap1510_find_ep (int ep)
-{
-	int i;
-
-	for (i = 0; i < udc_device->bus->max_endpoints; i++) {
-		if (udc_device->bus->endpoint_array[i].endpoint_address == ep)
-			return &udc_device->bus->endpoint_array[i];
-	}
-	return NULL;
-}
-
-/* ************************************************************************** */
-/* IO
- */
-
-/*
- * omap1510_prepare_endpoint_for_rx
- *
- * This function implements TRM Figure 14-11.
- *
- * The endpoint to prepare for transfer is specified as a physical endpoint
- * number.  For OUT (rx) endpoints 1 through 15, the corresponding endpoint
- * configuration register is checked to see if the endpoint is ISO or not.
- * If the OUT endpoint is valid and is non-ISO then its FIFO is enabled.
- * No action is taken for endpoint 0 or for IN (tx) endpoints 16 through 30.
- */
-static void omap1510_prepare_endpoint_for_rx (int ep_addr)
-{
-	int ep_num = ep_addr & USB_ENDPOINT_NUMBER_MASK;
-
-	UDCDBGA ("omap1510_prepare_endpoint %x", ep_addr);
-	if (((ep_addr & USB_ENDPOINT_DIR_MASK) == USB_DIR_OUT)) {
-		if ((inw (UDC_EP_RX (ep_num)) &
-		     (UDC_EPn_RX_Valid | UDC_EPn_RX_Iso)) ==
-		    UDC_EPn_RX_Valid) {
-			/* rx endpoint is valid, non-ISO, so enable its FIFO */
-			outw (UDC_EP_Sel | ep_num, UDC_EP_NUM);
-			outw (UDC_Set_FIFO_En, UDC_CTRL);
-			outw (0, UDC_EP_NUM);
-		}
-	}
-}
-
-/* omap1510_configure_endpoints
- *
- * This function implements TRM Figure 14-10.
- */
-static void omap1510_configure_endpoints (struct usb_device_instance *device)
-{
-	int ep;
-	struct usb_bus_instance *bus;
-	struct usb_endpoint_instance *endpoint;
-	unsigned short ep_ptr;
-	unsigned short ep_size;
-	unsigned short ep_isoc;
-	unsigned short ep_doublebuffer;
-	int ep_addr;
-	int packet_size;
-	int buffer_size;
-	int attributes;
-
-	bus = device->bus;
-
-	/* There is a dedicated 2048 byte buffer for USB packets that may be
-	 * arbitrarily partitioned among the endpoints on 8-byte boundaries.
-	 * The first 8 bytes are reserved for receiving setup packets on
-	 * endpoint 0.
-	 */
-	ep_ptr = 8;		/* reserve the first 8 bytes for the setup fifo */
-
-	for (ep = 0; ep < bus->max_endpoints; ep++) {
-		endpoint = bus->endpoint_array + ep;
-		ep_addr = endpoint->endpoint_address;
-		if ((ep_addr & USB_ENDPOINT_DIR_MASK) == USB_DIR_IN) {
-			/* IN endpoint */
-			packet_size = endpoint->tx_packetSize;
-			attributes = endpoint->tx_attributes;
-		} else {
-			/* OUT endpoint */
-			packet_size = endpoint->rcv_packetSize;
-			attributes = endpoint->rcv_attributes;
-		}
-
-		switch (packet_size) {
-		case 0:
-			ep_size = 0;
-			break;
-		case 8:
-			ep_size = 0;
-			break;
-		case 16:
-			ep_size = 1;
-			break;
-		case 32:
-			ep_size = 2;
-			break;
-		case 64:
-			ep_size = 3;
-			break;
-		case 128:
-			ep_size = 4;
-			break;
-		case 256:
-			ep_size = 5;
-			break;
-		case 512:
-			ep_size = 6;
-			break;
-		default:
-			UDCDBGA ("ep 0x%02x has bad packet size %d",
-				 ep_addr, packet_size);
-			packet_size = 0;
-			ep_size = 0;
-			break;
-		}
-
-		switch (attributes & USB_ENDPOINT_XFERTYPE_MASK) {
-		case USB_ENDPOINT_XFER_CONTROL:
-		case USB_ENDPOINT_XFER_BULK:
-		case USB_ENDPOINT_XFER_INT:
-		default:
-			/* A non-isochronous endpoint may optionally be
-			 * double-buffered. For now we disable
-			 * double-buffering.
-			 */
-			ep_doublebuffer = 0;
-			ep_isoc = 0;
-			if (packet_size > 64)
-				packet_size = 0;
-			if (!ep || !ep_doublebuffer)
-				buffer_size = packet_size;
-			else
-				buffer_size = packet_size * 2;
-			break;
-		case USB_ENDPOINT_XFER_ISOC:
-			/* Isochronous endpoints are always double-
-			 * buffered, but the double-buffering bit
-			 * in the endpoint configuration register
-			 * becomes the msb of the endpoint size so we
-			 * set the double-buffering flag to zero.
-			 */
-			ep_doublebuffer = 0;
-			ep_isoc = 1;
-			buffer_size = packet_size * 2;
-			break;
-		}
-
-		/* check to see if our packet buffer RAM is exhausted */
-		if ((ep_ptr + buffer_size) > 2048) {
-			UDCDBGA ("out of packet RAM for ep 0x%02x buf size %d", ep_addr, buffer_size);
-			buffer_size = packet_size = 0;
-		}
-
-		/* force a default configuration for endpoint 0 since it is
-		 * always enabled
-		 */
-		if (!ep && ((packet_size < 8) || (packet_size > 64))) {
-			buffer_size = packet_size = 64;
-			ep_size = 3;
-		}
-
-		if (!ep) {
-			/* configure endpoint 0 */
-			outw ((ep_size << 12) | (ep_ptr >> 3), UDC_EP0);
-			/*UDCDBGA("ep 0 buffer offset 0x%03x packet size 0x%03x", */
-			/*	ep_ptr, packet_size); */
-		} else if ((ep_addr & USB_ENDPOINT_DIR_MASK) == USB_DIR_IN) {
-			/* IN endpoint */
-			if (packet_size) {
-				outw ((1 << 15) | (ep_doublebuffer << 14) |
-				      (ep_size << 12) | (ep_isoc << 11) |
-				      (ep_ptr >> 3),
-				      UDC_EP_TX (ep_addr &
-						 USB_ENDPOINT_NUMBER_MASK));
-				UDCDBGA ("IN ep %d buffer offset 0x%03x"
-					 " packet size 0x%03x",
-					 ep_addr & USB_ENDPOINT_NUMBER_MASK,
-					 ep_ptr, packet_size);
-			} else {
-				outw (0,
-				      UDC_EP_TX (ep_addr &
-						 USB_ENDPOINT_NUMBER_MASK));
-			}
-		} else {
-			/* OUT endpoint */
-			if (packet_size) {
-				outw ((1 << 15) | (ep_doublebuffer << 14) |
-				      (ep_size << 12) | (ep_isoc << 11) |
-				      (ep_ptr >> 3),
-				      UDC_EP_RX (ep_addr &
-						 USB_ENDPOINT_NUMBER_MASK));
-				UDCDBGA ("OUT ep %d buffer offset 0x%03x"
-					 " packet size 0x%03x",
-					 ep_addr & USB_ENDPOINT_NUMBER_MASK,
-					 ep_ptr, packet_size);
-			} else {
-				outw (0,
-				      UDC_EP_RX (ep_addr &
-						 USB_ENDPOINT_NUMBER_MASK));
-			}
-		}
-		ep_ptr += buffer_size;
-	}
-}
-
-/* omap1510_deconfigure_device
- *
- * This function balances omap1510_configure_device.
- */
-static void omap1510_deconfigure_device (void)
-{
-	int epnum;
-
-	UDCDBG ("clear Cfg_Lock");
-	outw (inw (UDC_SYSCON1) & ~UDC_Cfg_Lock, UDC_SYSCON1);
-	UDCREG (UDC_SYSCON1);
-
-	/* deconfigure all endpoints */
-	for (epnum = 1; epnum <= 15; epnum++) {
-		outw (0, UDC_EP_RX (epnum));
-		outw (0, UDC_EP_TX (epnum));
-	}
-}
-
-/* omap1510_configure_device
- *
- * This function implements TRM Figure 14-9.
- */
-static void omap1510_configure_device (struct usb_device_instance *device)
-{
-	omap1510_configure_endpoints (device);
-
-
-	/* Figure 14-9 indicates we should enable interrupts here, but we have
-	 * other routines (udc_all_interrupts, udc_suspended_interrupts) to
-	 * do that.
-	 */
-
-	UDCDBG ("set Cfg_Lock");
-	outw (inw (UDC_SYSCON1) | UDC_Cfg_Lock, UDC_SYSCON1);
-	UDCREG (UDC_SYSCON1);
-}
-
-/* omap1510_write_noniso_tx_fifo
- *
- * This function implements TRM Figure 14-30.
- *
- * If the endpoint has an active tx_urb, then the next packet of data from the
- * URB is written to the tx FIFO.  The total amount of data in the urb is given
- * by urb->actual_length.  The maximum amount of data that can be sent in any
- * one packet is given by endpoint->tx_packetSize.  The number of data bytes
- * from this URB that have already been transmitted is given by endpoint->sent.
- * endpoint->last is updated by this routine with the number of data bytes
- * transmitted in this packet.
- *
- * In accordance with Figure 14-30, the EP_NUM register must already have been
- * written with the value to select the appropriate tx FIFO before this routine
- * is called.
- */
-static void omap1510_write_noniso_tx_fifo (struct usb_endpoint_instance
-					   *endpoint)
-{
-	struct urb *urb = endpoint->tx_urb;
-
-	if (urb) {
-		unsigned int last, i;
-
-		UDCDBGA ("urb->buffer %p, buffer_length %d, actual_length %d",
-			 urb->buffer, urb->buffer_length, urb->actual_length);
-		if ((last =
-		     MIN (urb->actual_length - endpoint->sent,
-			  endpoint->tx_packetSize))) {
-			u8 *cp = urb->buffer + endpoint->sent;
-
-			UDCDBGA ("endpoint->sent %d, tx_packetSize %d, last %d", endpoint->sent, endpoint->tx_packetSize, last);
-
-			if (((u32) cp & 1) == 0) {	/* word aligned? */
-				outsw (UDC_DATA, cp, last >> 1);
-			} else {	/* byte aligned. */
-				for (i = 0; i < (last >> 1); i++) {
-					u16 w = ((u16) cp[2 * i + 1] << 8) |
-						(u16) cp[2 * i];
-					outw (w, UDC_DATA);
-				}
-			}
-			if (last & 1) {
-				outb (*(cp + last - 1), UDC_DATA);
-			}
-		}
-		endpoint->last = last;
-	}
-}
-
-/* omap1510_read_noniso_rx_fifo
- *
- * This function implements TRM Figure 14-28.
- *
- * If the endpoint has an active rcv_urb, then the next packet of data is read
- * from the rcv FIFO and written to rcv_urb->buffer at offset
- * rcv_urb->actual_length to append the packet data to the data from any
- * previous packets for this transfer.	We assume that there is sufficient room
- * left in the buffer to hold an entire packet of data.
- *
- * The return value is the number of bytes read from the FIFO for this packet.
- *
- * In accordance with Figure 14-28, the EP_NUM register must already have been
- * written with the value to select the appropriate rcv FIFO before this routine
- * is called.
- */
-static int omap1510_read_noniso_rx_fifo (struct usb_endpoint_instance
-					 *endpoint)
-{
-	struct urb *urb = endpoint->rcv_urb;
-	int len = 0;
-
-	if (urb) {
-		len = inw (UDC_RXFSTAT);
-
-		if (len) {
-			unsigned char *cp = urb->buffer + urb->actual_length;
-
-			insw (UDC_DATA, cp, len >> 1);
-			if (len & 1)
-				*(cp + len - 1) = inb (UDC_DATA);
-		}
-	}
-	return len;
-}
-
-/* omap1510_prepare_for_control_write_status
- *
- * This function implements TRM Figure 14-17.
- *
- * We have to deal here with non-autodecoded control writes that haven't already
- * been dealt with by ep0_recv_setup.  The non-autodecoded standard control
- * write requests are:	set/clear endpoint feature, set configuration, set
- * interface, and set descriptor.  ep0_recv_setup handles set/clear requests for
- * ENDPOINT_HALT by halting the endpoint for a set request and resetting the
- * endpoint for a clear request.  ep0_recv_setup returns an error for
- * SET_DESCRIPTOR requests which causes them to be terminated with a stall by
- * the setup handler.  A SET_INTERFACE request is handled by ep0_recv_setup by
- * generating a DEVICE_SET_INTERFACE event.  This leaves only the
- * SET_CONFIGURATION event for us to deal with here.
- *
- */
-static void omap1510_prepare_for_control_write_status (struct urb *urb)
-{
-	struct usb_device_request *request = &urb->device_request;;
-
-	/* check for a SET_CONFIGURATION request */
-	if (request->bRequest == USB_REQ_SET_CONFIGURATION) {
-		int configuration = le16_to_cpu (request->wValue) & 0xff;
-		unsigned short devstat = inw (UDC_DEVSTAT);
-
-		if ((devstat & (UDC_ADD | UDC_CFG)) == UDC_ADD) {
-			/* device is currently in ADDRESSED state */
-			if (configuration) {
-				/* Assume the specified non-zero configuration
-				 * value is valid and switch to the CONFIGURED
-				 * state.
-				 */
-				outw (UDC_Dev_Cfg, UDC_SYSCON2);
-			}
-		} else if ((devstat & UDC_CFG) == UDC_CFG) {
-			/* device is currently in CONFIGURED state */
-			if (!configuration) {
-				/* Switch to ADDRESSED state. */
-				outw (UDC_Clr_Cfg, UDC_SYSCON2);
-			}
-		}
-	}
-
-	/* select EP0 tx FIFO */
-	outw (UDC_EP_Dir | UDC_EP_Sel, UDC_EP_NUM);
-	/* clear endpoint (no data bytes in status stage) */
-	outw (UDC_Clr_EP, UDC_CTRL);
-	/* enable the EP0 tx FIFO */
-	outw (UDC_Set_FIFO_En, UDC_CTRL);
-	/* deselect the endpoint */
-	outw (UDC_EP_Dir, UDC_EP_NUM);
-}
-
-/* udc_state_transition_up
- * udc_state_transition_down
- *
- * Helper functions to implement device state changes.	The device states and
- * the events that transition between them are:
- *
- *				STATE_ATTACHED
- *				||	/\
- *				\/	||
- *	DEVICE_HUB_CONFIGURED			DEVICE_HUB_RESET
- *				||	/\
- *				\/	||
- *				STATE_POWERED
- *				||	/\
- *				\/	||
- *	DEVICE_RESET				DEVICE_POWER_INTERRUPTION
- *				||	/\
- *				\/	||
- *				STATE_DEFAULT
- *				||	/\
- *				\/	||
- *	DEVICE_ADDRESS_ASSIGNED			DEVICE_RESET
- *				||	/\
- *				\/	||
- *				STATE_ADDRESSED
- *				||	/\
- *				\/	||
- *	DEVICE_CONFIGURED			DEVICE_DE_CONFIGURED
- *				||	/\
- *				\/	||
- *				STATE_CONFIGURED
- *
- * udc_state_transition_up transitions up (in the direction from STATE_ATTACHED
- * to STATE_CONFIGURED) from the specified initial state to the specified final
- * state, passing through each intermediate state on the way.  If the initial
- * state is at or above (i.e. nearer to STATE_CONFIGURED) the final state, then
- * no state transitions will take place.
- *
- * udc_state_transition_down transitions down (in the direction from
- * STATE_CONFIGURED to STATE_ATTACHED) from the specified initial state to the
- * specified final state, passing through each intermediate state on the way.
- * If the initial state is at or below (i.e. nearer to STATE_ATTACHED) the final
- * state, then no state transitions will take place.
- *
- * These functions must only be called with interrupts disabled.
- */
-static void udc_state_transition_up (usb_device_state_t initial,
-				     usb_device_state_t final)
-{
-	if (initial < final) {
-		switch (initial) {
-		case STATE_ATTACHED:
-			usbd_device_event_irq (udc_device,
-					       DEVICE_HUB_CONFIGURED, 0);
-			if (final == STATE_POWERED)
-				break;
-		case STATE_POWERED:
-			usbd_device_event_irq (udc_device, DEVICE_RESET, 0);
-			if (final == STATE_DEFAULT)
-				break;
-		case STATE_DEFAULT:
-			usbd_device_event_irq (udc_device,
-					       DEVICE_ADDRESS_ASSIGNED, 0);
-			if (final == STATE_ADDRESSED)
-				break;
-		case STATE_ADDRESSED:
-			usbd_device_event_irq (udc_device, DEVICE_CONFIGURED,
-					       0);
-		case STATE_CONFIGURED:
-			break;
-		default:
-			break;
-		}
-	}
-}
-
-static void udc_state_transition_down (usb_device_state_t initial,
-				       usb_device_state_t final)
-{
-	if (initial > final) {
-		switch (initial) {
-		case STATE_CONFIGURED:
-			usbd_device_event_irq (udc_device, DEVICE_DE_CONFIGURED, 0);
-			if (final == STATE_ADDRESSED)
-				break;
-		case STATE_ADDRESSED:
-			usbd_device_event_irq (udc_device, DEVICE_RESET, 0);
-			if (final == STATE_DEFAULT)
-				break;
-		case STATE_DEFAULT:
-			usbd_device_event_irq (udc_device, DEVICE_POWER_INTERRUPTION, 0);
-			if (final == STATE_POWERED)
-				break;
-		case STATE_POWERED:
-			usbd_device_event_irq (udc_device, DEVICE_HUB_RESET, 0);
-		case STATE_ATTACHED:
-			break;
-		default:
-			break;
-		}
-	}
-}
-
-/* Handle all device state changes.
- * This function implements TRM Figure 14-21.
- */
-static void omap1510_udc_state_changed (void)
-{
-	u16 bits;
-	u16 devstat = inw (UDC_DEVSTAT);
-
-	UDCDBGA ("state changed, devstat %x, old %x", devstat, udc_devstat);
-
-	bits = devstat ^ udc_devstat;
-	if (bits) {
-		if (bits & UDC_ATT) {
-			if (devstat & UDC_ATT) {
-				UDCDBG ("device attached and powered");
-				udc_state_transition_up (udc_device->device_state, STATE_POWERED);
-			} else {
-				UDCDBG ("device detached or unpowered");
-				udc_state_transition_down (udc_device->device_state, STATE_ATTACHED);
-			}
-		}
-		if (bits & UDC_USB_Reset) {
-			if (devstat & UDC_USB_Reset) {
-				UDCDBG ("device reset in progess");
-				udc_state_transition_down (udc_device->device_state, STATE_POWERED);
-			} else {
-				UDCDBG ("device reset completed");
-			}
-		}
-		if (bits & UDC_DEF) {
-			if (devstat & UDC_DEF) {
-				UDCDBG ("device entering default state");
-				udc_state_transition_up (udc_device->device_state, STATE_DEFAULT);
-			} else {
-				UDCDBG ("device leaving default state");
-				udc_state_transition_down (udc_device->device_state, STATE_POWERED);
-			}
-		}
-		if (bits & UDC_SUS) {
-			if (devstat & UDC_SUS) {
-				UDCDBG ("entering suspended state");
-				usbd_device_event_irq (udc_device, DEVICE_BUS_INACTIVE, 0);
-			} else {
-				UDCDBG ("leaving suspended state");
-				usbd_device_event_irq (udc_device, DEVICE_BUS_ACTIVITY, 0);
-			}
-		}
-		if (bits & UDC_R_WK_OK) {
-			UDCDBGA ("remote wakeup %s", (devstat & UDC_R_WK_OK)
-				 ? "enabled" : "disabled");
-		}
-		if (bits & UDC_ADD) {
-			if (devstat & UDC_ADD) {
-				UDCDBG ("default -> addressed");
-				udc_state_transition_up (udc_device->device_state, STATE_ADDRESSED);
-			} else {
-				UDCDBG ("addressed -> default");
-				udc_state_transition_down (udc_device->device_state, STATE_DEFAULT);
-			}
-		}
-		if (bits & UDC_CFG) {
-			if (devstat & UDC_CFG) {
-				UDCDBG ("device configured");
-				/* The ep0_recv_setup function generates the
-				 * DEVICE_CONFIGURED event when a
-				 * USB_REQ_SET_CONFIGURATION setup packet is
-				 * received, so we should already be in the
-				 * state STATE_CONFIGURED.
-				 */
-				udc_state_transition_up (udc_device->device_state, STATE_CONFIGURED);
-			} else {
-				UDCDBG ("device deconfigured");
-				udc_state_transition_down (udc_device->device_state, STATE_ADDRESSED);
-			}
-		}
-	}
-
-	/* Clear interrupt source */
-	outw (UDC_DS_Chg, UDC_IRQ_SRC);
-
-	/* Save current DEVSTAT */
-	udc_devstat = devstat;
-}
-
-/* Handle SETUP USB interrupt.
- * This function implements TRM Figure 14-14.
- */
-static void omap1510_udc_setup (struct usb_endpoint_instance *endpoint)
-{
-	UDCDBG ("-> Entering device setup");
-
-	do {
-		const int setup_pktsize = 8;
-		unsigned char *datap =
-			(unsigned char *) &ep0_urb->device_request;
-
-		/* Gain access to EP 0 setup FIFO */
-		outw (UDC_Setup_Sel, UDC_EP_NUM);
-
-		/* Read control request data */
-		insb (UDC_DATA, datap, setup_pktsize);
-
-		UDCDBGA ("EP0 setup read [%x %x %x %x %x %x %x %x]",
-			 *(datap + 0), *(datap + 1), *(datap + 2),
-			 *(datap + 3), *(datap + 4), *(datap + 5),
-			 *(datap + 6), *(datap + 7));
-
-		/* Reset EP0 setup FIFO */
-		outw (0, UDC_EP_NUM);
-	} while (inw (UDC_IRQ_SRC) & UDC_Setup);
-
-	/* Try to process setup packet */
-	if (ep0_recv_setup (ep0_urb)) {
-		/* Not a setup packet, stall next EP0 transaction */
-		udc_stall_ep (0);
-		UDCDBG ("can't parse setup packet, still waiting for setup");
-		return;
-	}
-
-	/* Check direction */
-	if ((ep0_urb->device_request.bmRequestType & USB_REQ_DIRECTION_MASK)
-	    == USB_REQ_HOST2DEVICE) {
-		UDCDBG ("control write on EP0");
-		if (le16_to_cpu (ep0_urb->device_request.wLength)) {
-			/* We don't support control write data stages.
-			 * The only standard control write request with a data
-			 * stage is SET_DESCRIPTOR, and ep0_recv_setup doesn't
-			 * support that so we just stall those requests.  A
-			 * function driver might support a non-standard
-			 * write request with a data stage, but it isn't
-			 * obvious what we would do with the data if we read it
-			 * so we'll just stall it.  It seems like the API isn't
-			 * quite right here.
-			 */
-#if 0
-			/* Here is what we would do if we did support control
-			 * write data stages.
-			 */
-			ep0_urb->actual_length = 0;
-			outw (0, UDC_EP_NUM);
-			/* enable the EP0 rx FIFO */
-			outw (UDC_Set_FIFO_En, UDC_CTRL);
-#else
-			/* Stall this request */
-			UDCDBG ("Stalling unsupported EP0 control write data "
-				"stage.");
-			udc_stall_ep (0);
-#endif
-		} else {
-			omap1510_prepare_for_control_write_status (ep0_urb);
-		}
-	} else {
-		UDCDBG ("control read on EP0");
-		/* The ep0_recv_setup function has already placed our response
-		 * packet data in ep0_urb->buffer and the packet length in
-		 * ep0_urb->actual_length.
-		 */
-		endpoint->tx_urb = ep0_urb;
-		endpoint->sent = 0;
-		/* select the EP0 tx FIFO */
-		outw (UDC_EP_Dir | UDC_EP_Sel, UDC_EP_NUM);
-		/* Write packet data to the FIFO.  omap1510_write_noniso_tx_fifo
-		 * will update endpoint->last with the number of bytes written
-		 * to the FIFO.
-		 */
-		omap1510_write_noniso_tx_fifo (endpoint);
-		/* enable the FIFO to start the packet transmission */
-		outw (UDC_Set_FIFO_En, UDC_CTRL);
-		/* deselect the EP0 tx FIFO */
-		outw (UDC_EP_Dir, UDC_EP_NUM);
-	}
-
-	UDCDBG ("<- Leaving device setup");
-}
-
-/* Handle endpoint 0 RX interrupt
- * This routine implements TRM Figure 14-16.
- */
-static void omap1510_udc_ep0_rx (struct usb_endpoint_instance *endpoint)
-{
-	unsigned short status;
-
-	UDCDBG ("RX on EP0");
-	/* select EP0 rx FIFO */
-	outw (UDC_EP_Sel, UDC_EP_NUM);
-
-	status = inw (UDC_STAT_FLG);
-
-	if (status & UDC_ACK) {
-		/* Check direction */
-		if ((ep0_urb->device_request.bmRequestType
-		     & USB_REQ_DIRECTION_MASK) == USB_REQ_HOST2DEVICE) {
-			/* This rx interrupt must be for a control write data
-			 * stage packet.
-			 *
-			 * We don't support control write data stages.
-			 * We should never end up here.
-			 */
-
-			/* clear the EP0 rx FIFO */
-			outw (UDC_Clr_EP, UDC_CTRL);
-
-			/* deselect the EP0 rx FIFO */
-			outw (0, UDC_EP_NUM);
-
-			UDCDBG ("Stalling unexpected EP0 control write "
-				"data stage packet");
-			udc_stall_ep (0);
-		} else {
-			/* This rx interrupt must be for a control read status
-			 * stage packet.
-			 */
-			UDCDBG ("ACK on EP0 control read status stage packet");
-			/* deselect EP0 rx FIFO */
-			outw (0, UDC_EP_NUM);
-		}
-	} else if (status & UDC_STALL) {
-		UDCDBG ("EP0 stall during RX");
-		/* deselect EP0 rx FIFO */
-		outw (0, UDC_EP_NUM);
-	} else {
-		/* deselect EP0 rx FIFO */
-		outw (0, UDC_EP_NUM);
-	}
-}
-
-/* Handle endpoint 0 TX interrupt
- * This routine implements TRM Figure 14-18.
- */
-static void omap1510_udc_ep0_tx (struct usb_endpoint_instance *endpoint)
-{
-	unsigned short status;
-	struct usb_device_request *request = &ep0_urb->device_request;
-
-	UDCDBG ("TX on EP0");
-	/* select EP0 TX FIFO */
-	outw (UDC_EP_Dir | UDC_EP_Sel, UDC_EP_NUM);
-
-	status = inw (UDC_STAT_FLG);
-	if (status & UDC_ACK) {
-		/* Check direction */
-		if ((request->bmRequestType & USB_REQ_DIRECTION_MASK) ==
-		    USB_REQ_HOST2DEVICE) {
-			/* This tx interrupt must be for a control write status
-			 * stage packet.
-			 */
-			UDCDBG ("ACK on EP0 control write status stage packet");
-			/* deselect EP0 TX FIFO */
-			outw (UDC_EP_Dir, UDC_EP_NUM);
-		} else {
-			/* This tx interrupt must be for a control read data
-			 * stage packet.
-			 */
-			int wLength = le16_to_cpu (request->wLength);
-
-			/* Update our count of bytes sent so far in this
-			 * transfer.
-			 */
-			endpoint->sent += endpoint->last;
-
-			/* We are finished with this transfer if we have sent
-			 * all of the bytes in our tx urb (urb->actual_length)
-			 * unless we need a zero-length terminating packet.  We
-			 * need a zero-length terminating packet if we returned
-			 * fewer bytes than were requested (wLength) by the host,
-			 * and the number of bytes we returned is an exact
-			 * multiple of the packet size endpoint->tx_packetSize.
-			 */
-			if ((endpoint->sent == ep0_urb->actual_length)
-			    && ((ep0_urb->actual_length == wLength)
-				|| (endpoint->last !=
-				    endpoint->tx_packetSize))) {
-				/* Done with control read data stage. */
-				UDCDBG ("control read data stage complete");
-				/* deselect EP0 TX FIFO */
-				outw (UDC_EP_Dir, UDC_EP_NUM);
-				/* select EP0 RX FIFO to prepare for control
-				 * read status stage.
-				 */
-				outw (UDC_EP_Sel, UDC_EP_NUM);
-				/* clear the EP0 RX FIFO */
-				outw (UDC_Clr_EP, UDC_CTRL);
-				/* enable the EP0 RX FIFO */
-				outw (UDC_Set_FIFO_En, UDC_CTRL);
-				/* deselect the EP0 RX FIFO */
-				outw (0, UDC_EP_NUM);
-			} else {
-				/* We still have another packet of data to send
-				 * in this control read data stage or else we
-				 * need a zero-length terminating packet.
-				 */
-				UDCDBG ("ACK control read data stage packet");
-				omap1510_write_noniso_tx_fifo (endpoint);
-				/* enable the EP0 tx FIFO to start transmission */
-				outw (UDC_Set_FIFO_En, UDC_CTRL);
-				/* deselect EP0 TX FIFO */
-				outw (UDC_EP_Dir, UDC_EP_NUM);
-			}
-		}
-	} else if (status & UDC_STALL) {
-		UDCDBG ("EP0 stall during TX");
-		/* deselect EP0 TX FIFO */
-		outw (UDC_EP_Dir, UDC_EP_NUM);
-	} else {
-		/* deselect EP0 TX FIFO */
-		outw (UDC_EP_Dir, UDC_EP_NUM);
-	}
-}
-
-/* Handle RX transaction on non-ISO endpoint.
- * This function implements TRM Figure 14-27.
- * The ep argument is a physical endpoint number for a non-ISO OUT endpoint
- * in the range 1 to 15.
- */
-static void omap1510_udc_epn_rx (int ep)
-{
-	unsigned short status;
-
-	/* Check endpoint status */
-	status = inw (UDC_STAT_FLG);
-
-	if (status & UDC_ACK) {
-		int nbytes;
-		struct usb_endpoint_instance *endpoint =
-			omap1510_find_ep (ep);
-
-		nbytes = omap1510_read_noniso_rx_fifo (endpoint);
-		usbd_rcv_complete (endpoint, nbytes, 0);
-
-		/* enable rx FIFO to prepare for next packet */
-		outw (UDC_Set_FIFO_En, UDC_CTRL);
-	} else if (status & UDC_STALL) {
-		UDCDBGA ("STALL on RX endpoint %d", ep);
-	} else if (status & UDC_NAK) {
-		UDCDBGA ("NAK on RX ep %d", ep);
-	} else {
-		serial_printf ("omap-bi: RX on ep %d with status %x", ep,
-			       status);
-	}
-}
-
-/* Handle TX transaction on non-ISO endpoint.
- * This function implements TRM Figure 14-29.
- * The ep argument is a physical endpoint number for a non-ISO IN endpoint
- * in the range 16 to 30.
- */
-static void omap1510_udc_epn_tx (int ep)
-{
-	unsigned short status;
-
-	/*serial_printf("omap1510_udc_epn_tx( %x )\n",ep); */
-
-	/* Check endpoint status */
-	status = inw (UDC_STAT_FLG);
-
-	if (status & UDC_ACK) {
-		struct usb_endpoint_instance *endpoint =
-			omap1510_find_ep (ep);
-
-		/* We need to transmit a terminating zero-length packet now if
-		 * we have sent all of the data in this URB and the transfer
-		 * size was an exact multiple of the packet size.
-		 */
-		if (endpoint->tx_urb
-		    && (endpoint->last == endpoint->tx_packetSize)
-		    && (endpoint->tx_urb->actual_length - endpoint->sent -
-			endpoint->last == 0)) {
-			/* Prepare to transmit a zero-length packet. */
-			endpoint->sent += endpoint->last;
-			/* write 0 bytes of data to FIFO */
-			omap1510_write_noniso_tx_fifo (endpoint);
-			/* enable tx FIFO to start transmission */
-			outw (UDC_Set_FIFO_En, UDC_CTRL);
-		} else if (endpoint->tx_urb
-			   && endpoint->tx_urb->actual_length) {
-			/* retire the data that was just sent */
-			usbd_tx_complete (endpoint);
-			/* Check to see if we have more data ready to transmit
-			 * now.
-			 */
-			if (endpoint->tx_urb
-			    && endpoint->tx_urb->actual_length) {
-				/* write data to FIFO */
-				omap1510_write_noniso_tx_fifo (endpoint);
-				/* enable tx FIFO to start transmission */
-				outw (UDC_Set_FIFO_En, UDC_CTRL);
-			}
-		}
-	} else if (status & UDC_STALL) {
-		UDCDBGA ("STALL on TX endpoint %d", ep);
-	} else if (status & UDC_NAK) {
-		UDCDBGA ("NAK on TX endpoint %d", ep);
-	} else {
-		/*serial_printf("omap-bi: TX on ep %d with status %x\n", ep, status); */
-	}
-}
-
-
-/*
--------------------------------------------------------------------------------
-*/
-
-/* Handle general USB interrupts and dispatch according to type.
- * This function implements TRM Figure 14-13.
- */
-void omap1510_udc_irq (void)
-{
-	u16 irq_src = inw (UDC_IRQ_SRC);
-	int valid_irq = 0;
-
-	if (!(irq_src & ~UDC_SOF_Flg))	/* ignore SOF interrupts ) */
-		return;
-
-	UDCDBGA ("< IRQ #%d start >- %x", udc_interrupts, irq_src);
-	/*serial_printf("< IRQ #%d start >- %x\n", udc_interrupts, irq_src); */
-
-	if (irq_src & UDC_DS_Chg) {
-		/* Device status changed */
-		omap1510_udc_state_changed ();
-		valid_irq++;
-	}
-	if (irq_src & UDC_EP0_RX) {
-		/* Endpoint 0 receive */
-		outw (UDC_EP0_RX, UDC_IRQ_SRC); /* ack interrupt */
-		omap1510_udc_ep0_rx (udc_device->bus->endpoint_array + 0);
-		valid_irq++;
-	}
-	if (irq_src & UDC_EP0_TX) {
-		/* Endpoint 0 transmit */
-		outw (UDC_EP0_TX, UDC_IRQ_SRC); /* ack interrupt */
-		omap1510_udc_ep0_tx (udc_device->bus->endpoint_array + 0);
-		valid_irq++;
-	}
-	if (irq_src & UDC_Setup) {
-		/* Device setup */
-		omap1510_udc_setup (udc_device->bus->endpoint_array + 0);
-		valid_irq++;
-	}
-	/*if (!valid_irq) */
-	/*	serial_printf("unknown interrupt, IRQ_SRC %.4x\n", irq_src); */
-	UDCDBGA ("< IRQ #%d end >", udc_interrupts);
-	udc_interrupts++;
-}
-
-/* This function implements TRM Figure 14-26. */
-void omap1510_udc_noniso_irq (void)
-{
-	unsigned short epnum;
-	unsigned short irq_src = inw (UDC_IRQ_SRC);
-	int valid_irq = 0;
-
-	if (!(irq_src & (UDC_EPn_RX | UDC_EPn_TX)))
-		return;
-
-	UDCDBGA ("non-ISO IRQ, IRQ_SRC %x", inw (UDC_IRQ_SRC));
-
-	if (irq_src & UDC_EPn_RX) {	/* Endpoint N OUT transaction */
-		/* Determine the endpoint number for this interrupt */
-		epnum = (inw (UDC_EPN_STAT) & 0x0f00) >> 8;
-		UDCDBGA ("RX on ep %x", epnum);
-
-		/* acknowledge interrupt */
-		outw (UDC_EPn_RX, UDC_IRQ_SRC);
-
-		if (epnum) {
-			/* select the endpoint FIFO */
-			outw (UDC_EP_Sel | epnum, UDC_EP_NUM);
-
-			omap1510_udc_epn_rx (epnum);
-
-			/* deselect the endpoint FIFO */
-			outw (epnum, UDC_EP_NUM);
-		}
-		valid_irq++;
-	}
-	if (irq_src & UDC_EPn_TX) {	/* Endpoint N IN transaction */
-		/* Determine the endpoint number for this interrupt */
-		epnum = (inw (UDC_EPN_STAT) & 0x000f) | USB_DIR_IN;
-		UDCDBGA ("TX on ep %x", epnum);
-
-		/* acknowledge interrupt */
-		outw (UDC_EPn_TX, UDC_IRQ_SRC);
-
-		if (epnum) {
-			/* select the endpoint FIFO */
-			outw (UDC_EP_Sel | UDC_EP_Dir | epnum, UDC_EP_NUM);
-
-			omap1510_udc_epn_tx (epnum);
-
-			/* deselect the endpoint FIFO */
-			outw (UDC_EP_Dir | epnum, UDC_EP_NUM);
-		}
-		valid_irq++;
-	}
-	if (!valid_irq)
-		serial_printf (": unknown non-ISO interrupt, IRQ_SRC %.4x\n",
-			       irq_src);
-}
-
-/*
--------------------------------------------------------------------------------
-*/
-
-
-/*
- * Start of public functions.
- */
-
-/* Called to start packet transmission. */
-int udc_endpoint_write (struct usb_endpoint_instance *endpoint)
-{
-	unsigned short epnum =
-		endpoint->endpoint_address & USB_ENDPOINT_NUMBER_MASK;
-
-	UDCDBGA ("Starting transmit on ep %x", epnum);
-
-	if (endpoint->tx_urb) {
-		/* select the endpoint FIFO */
-		outw (UDC_EP_Sel | UDC_EP_Dir | epnum, UDC_EP_NUM);
-		/* write data to FIFO */
-		omap1510_write_noniso_tx_fifo (endpoint);
-		/* enable tx FIFO to start transmission */
-		outw (UDC_Set_FIFO_En, UDC_CTRL);
-		/* deselect the endpoint FIFO */
-		outw (UDC_EP_Dir | epnum, UDC_EP_NUM);
-	}
-
-	return 0;
-}
-
-/* Start to initialize h/w stuff */
-int udc_init (void)
-{
-	u16 udc_rev;
-	uchar value;
-	ulong gpio;
-	int i;
-
-	/* Let the device settle down before we start */
-	for (i = 0; i < UDC_INIT_MDELAY; i++) udelay(1000);
-
-	udc_device = NULL;
-
-	UDCDBG ("starting");
-
-	/* Check peripheral reset. Must be 1 to make sure
-	   MPU TIPB peripheral reset is inactive */
-	UDCREG (ARM_RSTCT2);
-
-	/* Set and check clock control.
-	 * We might ought to be using the clock control API to do
-	 * this instead of fiddling with the clock registers directly
-	 * here.
-	 */
-	outw ((1 << 4) | (1 << 5), CLOCK_CTRL);
-	UDCREG (CLOCK_CTRL);
-
-	/* Set and check SOFT
-	 * The below line of code has been changed to perform a
-	 * read-modify-write instead of a simple write for
-	 * configuring the SOFT_REQ register. This allows the code
-	 * to be compatible with OMAP5912 and OMAP16xx devices
-	 */
-	outw ((1 << 4) | (1 << 3) | 1 | (inw(SOFT_REQ)), SOFT_REQ);
-
-	/* Short delay to wait for DPLL */
-	udelay (1000);
-
-	/* Print banner with device revision */
-	udc_rev = inw (UDC_REV) & 0xff;
-
-#ifdef CONFIG_OMAP1610
-	printf ("USB:   TI OMAP5912 USB function module rev %d.%d\n",
-		udc_rev >> 4, udc_rev & 0xf);
-#endif
-
-	/* The VBUS_MODE bit selects whether VBUS detection is done via
-	 * software (1) or hardware (0).  When software detection is
-	 * selected, VBUS_CTRL selects whether USB is not connected (0)
-	 * or connected (1).
-	 */
-	outl (inl (FUNC_MUX_CTRL_0) | UDC_VBUS_MODE, FUNC_MUX_CTRL_0);
-	outl (inl (FUNC_MUX_CTRL_0) & ~UDC_VBUS_CTRL, FUNC_MUX_CTRL_0);
-	UDCREGL (FUNC_MUX_CTRL_0);
-
-	/*
-	 * At this point, device is ready for configuration...
-	 */
-
-	UDCDBG ("disable USB interrupts");
-	outw (0, UDC_IRQ_EN);
-	UDCREG (UDC_IRQ_EN);
-
-	UDCDBG ("disable USB DMA");
-	outw (0, UDC_DMA_IRQ_EN);
-	UDCREG (UDC_DMA_IRQ_EN);
-
-	UDCDBG ("initialize SYSCON1");
-	outw (UDC_Self_Pwr | UDC_Pullup_En, UDC_SYSCON1);
-	UDCREG (UDC_SYSCON1);
-
-	return 0;
-}
-
-/* Stall endpoint */
-static void udc_stall_ep (unsigned int ep_addr)
-{
-	/*int ep_addr = PHYS_EP_TO_EP_ADDR(ep); */
-	int ep_num = ep_addr & USB_ENDPOINT_NUMBER_MASK;
-
-	UDCDBGA ("stall ep_addr %d", ep_addr);
-
-	/* REVISIT?
-	 * The OMAP TRM section 14.2.4.2 says we must check that the FIFO
-	 * is empty before halting the endpoint.  The current implementation
-	 * doesn't check that the FIFO is empty.
-	 */
-
-	if (!ep_num) {
-		outw (UDC_Stall_Cmd, UDC_SYSCON2);
-	} else if ((ep_addr & USB_ENDPOINT_DIR_MASK) == USB_DIR_OUT) {
-		if (inw (UDC_EP_RX (ep_num)) & UDC_EPn_RX_Valid) {
-			/* we have a valid rx endpoint, so halt it */
-			outw (UDC_EP_Sel | ep_num, UDC_EP_NUM);
-			outw (UDC_Set_Halt, UDC_CTRL);
-			outw (ep_num, UDC_EP_NUM);
-		}
-	} else {
-		if (inw (UDC_EP_TX (ep_num)) & UDC_EPn_TX_Valid) {
-			/* we have a valid tx endpoint, so halt it */
-			outw (UDC_EP_Sel | UDC_EP_Dir | ep_num, UDC_EP_NUM);
-			outw (UDC_Set_Halt, UDC_CTRL);
-			outw (ep_num, UDC_EP_NUM);
-		}
-	}
-}
-
-/* Reset endpoint */
-#if 0
-static void udc_reset_ep (unsigned int ep_addr)
-{
-	/*int ep_addr = PHYS_EP_TO_EP_ADDR(ep); */
-	int ep_num = ep_addr & USB_ENDPOINT_NUMBER_MASK;
-
-	UDCDBGA ("reset ep_addr %d", ep_addr);
-
-	if (!ep_num) {
-		/* control endpoint 0 can't be reset */
-	} else if ((ep_addr & USB_ENDPOINT_DIR_MASK) == USB_DIR_OUT) {
-		UDCDBGA ("UDC_EP_RX(%d) = 0x%04x", ep_num,
-			 inw (UDC_EP_RX (ep_num)));
-		if (inw (UDC_EP_RX (ep_num)) & UDC_EPn_RX_Valid) {
-			/* we have a valid rx endpoint, so reset it */
-			outw (ep_num | UDC_EP_Sel, UDC_EP_NUM);
-			outw (UDC_Reset_EP, UDC_CTRL);
-			outw (ep_num, UDC_EP_NUM);
-			UDCDBGA ("OUT endpoint %d reset", ep_num);
-		}
-	} else {
-		UDCDBGA ("UDC_EP_TX(%d) = 0x%04x", ep_num,
-			 inw (UDC_EP_TX (ep_num)));
-		/* Resetting of tx endpoints seems to be causing the USB function
-		 * module to fail, which causes problems when the driver is
-		 * uninstalled.	 We'll skip resetting tx endpoints for now until
-		 * we figure out what the problem is.
-		 */
-#if 0
-		if (inw (UDC_EP_TX (ep_num)) & UDC_EPn_TX_Valid) {
-			/* we have a valid tx endpoint, so reset it */
-			outw (ep_num | UDC_EP_Dir | UDC_EP_Sel, UDC_EP_NUM);
-			outw (UDC_Reset_EP, UDC_CTRL);
-			outw (ep_num | UDC_EP_Dir, UDC_EP_NUM);
-			UDCDBGA ("IN endpoint %d reset", ep_num);
-		}
-#endif
-	}
-}
-#endif
-
-/* ************************************************************************** */
-
-/**
- * udc_check_ep - check logical endpoint
-  *
- * Return physical endpoint number to use for this logical endpoint or zero if not valid.
- */
-#if 0
-int udc_check_ep (int logical_endpoint, int packetsize)
-{
-	if ((logical_endpoint == 0x80) ||
-	    ((logical_endpoint & 0x8f) != logical_endpoint)) {
-		return 0;
-	}
-
-	switch (packetsize) {
-	case 8:
-	case 16:
-	case 32:
-	case 64:
-	case 128:
-	case 256:
-	case 512:
-		break;
-	default:
-		return 0;
-	}
-
-	return EP_ADDR_TO_PHYS_EP (logical_endpoint);
-}
-#endif
-
-/*
- * udc_setup_ep - setup endpoint
- *
- * Associate a physical endpoint with endpoint_instance
- */
-void udc_setup_ep (struct usb_device_instance *device,
-		   unsigned int ep, struct usb_endpoint_instance *endpoint)
-{
-	UDCDBGA ("setting up endpoint addr %x", endpoint->endpoint_address);
-
-	/* This routine gets called by bi_modinit for endpoint 0 and from
-	 * bi_config for all of the other endpoints.  bi_config gets called
-	 * during the DEVICE_CREATE, DEVICE_CONFIGURED, and
-	 * DEVICE_SET_INTERFACE events.	 We need to reconfigure the OMAP packet
-	 * RAM after bi_config scans the selected device configuration and
-	 * initializes the endpoint structures, but before this routine enables
-	 * the OUT endpoint FIFOs.  Since bi_config calls this routine in a
-	 * loop for endpoints 1 through UDC_MAX_ENDPOINTS, we reconfigure our
-	 * packet RAM here when ep==1.
-	 * I really hate to do this here, but it seems like the API exported
-	 * by the USB bus interface controller driver to the usbd-bi module
-	 * isn't quite right so there is no good place to do this.
-	 */
-	if (ep == 1) {
-		omap1510_deconfigure_device ();
-		omap1510_configure_device (device);
-	}
-
-	if (endpoint && (ep < UDC_MAX_ENDPOINTS)) {
-		int ep_addr = endpoint->endpoint_address;
-
-		if (!ep_addr) {
-			/* nothing to do for endpoint 0 */
-		} else if ((ep_addr & USB_ENDPOINT_DIR_MASK) == USB_DIR_IN) {
-			/* nothing to do for IN (tx) endpoints */
-		} else {	/* OUT (rx) endpoint */
-			if (endpoint->rcv_packetSize) {
-				/*struct urb* urb = &(urb_out_array[ep&0xFF]); */
-				/*urb->endpoint = endpoint; */
-				/*urb->device = device; */
-				/*urb->buffer_length = sizeof(urb->buffer); */
-
-				/*endpoint->rcv_urb = urb; */
-				omap1510_prepare_endpoint_for_rx (ep_addr);
-			}
-		}
-	}
-}
-
-/**
- * udc_disable_ep - disable endpoint
- * @ep:
- *
- * Disable specified endpoint
- */
-#if 0
-void udc_disable_ep (unsigned int ep_addr)
-{
-	/*int ep_addr = PHYS_EP_TO_EP_ADDR(ep); */
-	int ep_num = ep_addr & USB_ENDPOINT_NUMBER_MASK;
-	struct usb_endpoint_instance *endpoint = omap1510_find_ep (ep_addr);	/*udc_device->bus->endpoint_array + ep; */
-
-	UDCDBGA ("disable ep_addr %d", ep_addr);
-
-	if (!ep_num) {
-		/* nothing to do for endpoint 0 */ ;
-	} else if ((ep_addr & USB_ENDPOINT_DIR_MASK) == USB_DIR_IN) {
-		if (endpoint->tx_packetSize) {
-			/* we have a valid tx endpoint */
-			/*usbd_flush_tx(endpoint); */
-			endpoint->tx_urb = NULL;
-		}
-	} else {
-		if (endpoint->rcv_packetSize) {
-			/* we have a valid rx endpoint */
-			/*usbd_flush_rcv(endpoint); */
-			endpoint->rcv_urb = NULL;
-		}
-	}
-}
-#endif
-
-/* ************************************************************************** */
-
-/**
- * udc_connected - is the USB cable connected
- *
- * Return non-zero if cable is connected.
- */
-#if 0
-int udc_connected (void)
-{
-	return ((inw (UDC_DEVSTAT) & UDC_ATT) == UDC_ATT);
-}
-#endif
-
-/* Turn on the USB connection by enabling the pullup resistor */
-void udc_connect (void)
-{
-	UDCDBG ("connect, enable Pullup");
-	outl (0x00000018, FUNC_MUX_CTRL_D);
-}
-
-/* Turn off the USB connection by disabling the pullup resistor */
-void udc_disconnect (void)
-{
-	UDCDBG ("disconnect, disable Pullup");
-	outl (0x00000000, FUNC_MUX_CTRL_D);
-}
-
-/* ************************************************************************** */
-
-
-/*
- * udc_disable_interrupts - disable interrupts
- * switch off interrupts
- */
-#if 0
-void udc_disable_interrupts (struct usb_device_instance *device)
-{
-	UDCDBG ("disabling all interrupts");
-	outw (0, UDC_IRQ_EN);
-}
-#endif
-
-/* ************************************************************************** */
-
-/**
- * udc_ep0_packetsize - return ep0 packetsize
- */
-#if 0
-int udc_ep0_packetsize (void)
-{
-	return EP0_PACKETSIZE;
-}
-#endif
-
-/* Switch on the UDC */
-void udc_enable (struct usb_device_instance *device)
-{
-	UDCDBGA ("enable device %p, status %d", device, device->status);
-
-	/* initialize driver state variables */
-	udc_devstat = 0;
-
-	/* Save the device structure pointer */
-	udc_device = device;
-
-	/* Setup ep0 urb */
-	if (!ep0_urb) {
-		ep0_urb =
-			usbd_alloc_urb (udc_device,
-					udc_device->bus->endpoint_array);
-	} else {
-		serial_printf ("udc_enable: ep0_urb already allocated %p\n",
-			       ep0_urb);
-	}
-
-	UDCDBG ("Check clock status");
-	UDCREG (STATUS_REQ);
-
-	/* The VBUS_MODE bit selects whether VBUS detection is done via
-	 * software (1) or hardware (0).  When software detection is
-	 * selected, VBUS_CTRL selects whether USB is not connected (0)
-	 * or connected (1).
-	 */
-	outl (inl (FUNC_MUX_CTRL_0) | UDC_VBUS_CTRL | UDC_VBUS_MODE,
-	      FUNC_MUX_CTRL_0);
-	UDCREGL (FUNC_MUX_CTRL_0);
-
-	omap1510_configure_device (device);
-}
-
-/* Switch off the UDC */
-void udc_disable (void)
-{
-	UDCDBG ("disable UDC");
-
-	omap1510_deconfigure_device ();
-
-	/* The VBUS_MODE bit selects whether VBUS detection is done via
-	 * software (1) or hardware (0).  When software detection is
-	 * selected, VBUS_CTRL selects whether USB is not connected (0)
-	 * or connected (1).
-	 */
-	outl (inl (FUNC_MUX_CTRL_0) | UDC_VBUS_MODE, FUNC_MUX_CTRL_0);
-	outl (inl (FUNC_MUX_CTRL_0) & ~UDC_VBUS_CTRL, FUNC_MUX_CTRL_0);
-	UDCREGL (FUNC_MUX_CTRL_0);
-
-	/* Free ep0 URB */
-	if (ep0_urb) {
-		/*usbd_dealloc_urb(ep0_urb); */
-		ep0_urb = NULL;
-	}
-
-	/* Reset device pointer.
-	 * We ought to do this here to balance the initialization of udc_device
-	 * in udc_enable, but some of our other exported functions get called
-	 * by the bus interface driver after udc_disable, so we have to hang on
-	 * to the device pointer to avoid a null pointer dereference. */
-	/* udc_device = NULL; */
-}
-
-/**
- * udc_startup - allow udc code to do any additional startup
- */
-void udc_startup_events (struct usb_device_instance *device)
-{
-	/* The DEVICE_INIT event puts the USB device in the state STATE_INIT. */
-	usbd_device_event_irq (device, DEVICE_INIT, 0);
-
-	/* The DEVICE_CREATE event puts the USB device in the state
-	 * STATE_ATTACHED.
-	 */
-	usbd_device_event_irq (device, DEVICE_CREATE, 0);
-
-	/* Some USB controller driver implementations signal
-	 * DEVICE_HUB_CONFIGURED and DEVICE_RESET events here.
-	 * DEVICE_HUB_CONFIGURED causes a transition to the state STATE_POWERED,
-	 * and DEVICE_RESET causes a transition to the state STATE_DEFAULT.
-	 * The OMAP USB client controller has the capability to detect when the
-	 * USB cable is connected to a powered USB bus via the ATT bit in the
-	 * DEVSTAT register, so we will defer the DEVICE_HUB_CONFIGURED and
-	 * DEVICE_RESET events until later.
-	 */
-
-	udc_enable (device);
-}
-
-/**
- * udc_irq - do pseudo interrupts
- */
-void udc_irq(void)
-{
-	/* Loop while we have interrupts.
-	 * If we don't do this, the input chain
-	 * polling delay is likely to miss
-	 * host requests.
-	 */
-	while (inw (UDC_IRQ_SRC) & ~UDC_SOF_Flg) {
-		/* Handle any new IRQs */
-		omap1510_udc_irq ();
-		omap1510_udc_noniso_irq ();
-	}
-}
-
-/* Flow control */
-void udc_set_nak(int epid)
-{
-	/* TODO: implement this functionality in omap1510 */
-}
-
-void udc_unset_nak (int epid)
-{
-	/* TODO: implement this functionality in omap1510 */
-}
diff --git a/include/configs/omap1510.h b/include/configs/omap1510.h
deleted file mode 100644
index 5482722..0000000
--- a/include/configs/omap1510.h
+++ /dev/null
@@ -1,756 +0,0 @@
-/*
- *
- * BRIEF MODULE DESCRIPTION
- *   OMAP hardware map
- *
- * Copyright (C) 2001 RidgeRun, Inc. (http://www.ridgerun.com)
- * Author: RidgeRun, Inc.
- *	   Greg Lonnon (glonnon@ridgerun.com) or info@ridgerun.com
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <linux/sizes.h>
-
-/*
-  There are 2 sets of general I/O -->
-  1. GPIO (shared between ARM & DSP, configured by ARM)
-  2. MPUIO which can be used only by the ARM.
-
-  Base address FFFB:5000 is where the ARM accesses the MPUIO control registers
-  (see 7.2.2 of the TRM for MPUIO reg definitions).
-
-  Base address E101:5000 is reserved for ARM access of the same MPUIO control
-  regs, but via the DSP I/O map.  This address is unavailable on 1510.
-
-  Base address FFFC:E000 is where the ARM accesses the GPIO config registers
-  directly via its own peripheral bus.
-
-  Base address E101:E000 is where the ARM can access the same GPIO config
-  registers, but the access takes place through the ARM port interface (called
-  API or MPUI) via the DSP's peripheral bus (DSP I/O space).
-
-  Therefore, the ARM should setup the GPIO regs thru the FFFC:E000 addresses
-  instead of the E101:E000 addresses.  The DSP has only read access of the pin
-  control register, so this may explain the inability to write to E101:E018.
-  Try accessing pin control reg at FFFC:E018.
- */
-#define OMAP1510_GPIO_BASE	 0xfffce000
-#define OMAP1510_GPIO_START	 OMAP1510_GPIO_BASE
-#define OMAP1510_GPIO_SIZE	 SZ_4K
-
-#define OMAP1510_MCBSP1_BASE	 0xE1011000
-#define OMAP1510_MCBSP1_SIZE	 SZ_4K
-#define OMAP1510_MCBSP1_START	 0xE1011000
-
-#define OMAP1510_MCBSP2_BASE	 0xFFFB1000
-
-#define OMAP1510_MCBSP3_BASE	 0xE1017000
-#define OMAP1510_MCBSP3_SIZE	 SZ_4K
-#define OMAP1510_MCBSP3_START	 0xE1017000
-
-/*
- * Where's the flush address (for flushing D and I cache?)
- */
-#define FLUSH_BASE		0xdf000000
-#define FLUSH_BASE_PHYS 0x00000000
-
-#ifndef __ASSEMBLER__
-
-#define PCIO_BASE		0
-
-/*
- * RAM definitions
- */
-#define MAPTOPHYS(a)		((unsigned long)(a) - PAGE_OFFSET)
-#define KERNTOPHYS(a)		((unsigned long)(&a))
-#define KERNEL_BASE		(0x10008000)
-#endif
-
-/* macro to get at IO space when running virtually */
-#define IO_ADDRESS(x) ((x))
-
-/* ----------------------------------------------------------------------------
- *  OMAP1510 system registers
- * ----------------------------------------------------------------------------
- */
-
-#define OMAP1510_UART1_BASE	    0xfffb0000	 /* "BLUETOOTH-UART" */
-#define OMAP1510_UART2_BASE	    0xfffb0800	 /* "MODEM-UART" */
-#define OMAP1510_RTC_BASE	    0xfffb4800	 /* RTC */
-#define OMAP1510_UART3_BASE	    0xfffb9800	 /* Shared MPU/DSP UART */
-#define OMAP1510_COM_MCBSP2_BASE    0xffff1000	 /* Com McBSP2 */
-#define OMAP1510_AUDIO_MCBSP_BASE   0xffff1800	 /* Audio McBSP2 */
-#define OMAP1510_ARMIO_BASE	    0xfffb5000	 /* keyboard/gpio */
-
-/*
- * OMAP1510 UART3 Registers
- */
-
-#define OMAP_MPU_UART3_BASE  0xFFFB9800 /* UART3 through MPU bus */
-
-/* UART3 Registers Maping through MPU bus */
-
-#define UART3_RHR	 (OMAP_MPU_UART3_BASE + 0)
-#define UART3_THR	 (OMAP_MPU_UART3_BASE + 0)
-#define UART3_DLL	 (OMAP_MPU_UART3_BASE + 0)
-#define UART3_IER	 (OMAP_MPU_UART3_BASE + 4)
-#define UART3_DLH	 (OMAP_MPU_UART3_BASE + 4)
-#define UART3_IIR	 (OMAP_MPU_UART3_BASE + 8)
-#define UART3_FCR	 (OMAP_MPU_UART3_BASE + 8)
-#define UART3_EFR	 (OMAP_MPU_UART3_BASE + 8)
-#define UART3_LCR	 (OMAP_MPU_UART3_BASE + 0x0C)
-#define UART3_MCR	 (OMAP_MPU_UART3_BASE + 0x10)
-#define UART3_XON1_ADDR1 (OMAP_MPU_UART3_BASE + 0x10)
-#define UART3_XON2_ADDR2 (OMAP_MPU_UART3_BASE + 0x14)
-#define UART3_LSR	 (OMAP_MPU_UART3_BASE + 0x14)
-#define UART3_TCR	 (OMAP_MPU_UART3_BASE + 0x18)
-#define UART3_MSR	 (OMAP_MPU_UART3_BASE + 0x18)
-#define UART3_XOFF1	 (OMAP_MPU_UART3_BASE + 0x18)
-#define UART3_XOFF2	 (OMAP_MPU_UART3_BASE + 0x1C)
-#define UART3_SPR	 (OMAP_MPU_UART3_BASE + 0x1C)
-#define UART3_TLR	 (OMAP_MPU_UART3_BASE + 0x1C)
-#define UART3_MDR1	 (OMAP_MPU_UART3_BASE + 0x20)
-#define UART3_MDR2	 (OMAP_MPU_UART3_BASE + 0x24)
-#define UART3_SFLSR	 (OMAP_MPU_UART3_BASE + 0x28)
-#define UART3_TXFLL	 (OMAP_MPU_UART3_BASE + 0x28)
-#define UART3_RESUME	 (OMAP_MPU_UART3_BASE + 0x2C)
-#define UART3_TXFLH	 (OMAP_MPU_UART3_BASE + 0x2C)
-#define UART3_SFREGL	 (OMAP_MPU_UART3_BASE + 0x30)
-#define UART3_RXFLL	 (OMAP_MPU_UART3_BASE + 0x30)
-#define UART3_SFREGH	 (OMAP_MPU_UART3_BASE + 0x34)
-#define UART3_RXFLH	 (OMAP_MPU_UART3_BASE + 0x34)
-#define UART3_BLR	 (OMAP_MPU_UART3_BASE + 0x38)
-#define UART3_ACREG	 (OMAP_MPU_UART3_BASE + 0x3C)
-#define UART3_DIV16	 (OMAP_MPU_UART3_BASE + 0x3C)
-#define UART3_SCR	 (OMAP_MPU_UART3_BASE + 0x40)
-#define UART3_SSR	 (OMAP_MPU_UART3_BASE + 0x44)
-#define UART3_EBLR	 (OMAP_MPU_UART3_BASE + 0x48)
-#define UART3_OSC_12M_SEL (OMAP_MPU_UART3_BASE + 0x4C)
-#define UART3_MVR	 (OMAP_MPU_UART3_BASE + 0x50)
-
-/*
- * Configuration Registers
- */
-#define FUNC_MUX_CTRL_0		0xfffe1000
-#define FUNC_MUX_CTRL_1		0xfffe1004
-#define FUNC_MUX_CTRL_2		0xfffe1008
-#define COMP_MODE_CTRL_0	0xfffe100c
-#define FUNC_MUX_CTRL_3		0xfffe1010
-#define FUNC_MUX_CTRL_4		0xfffe1014
-#define FUNC_MUX_CTRL_5		0xfffe1018
-#define FUNC_MUX_CTRL_6		0xfffe101C
-#define FUNC_MUX_CTRL_7		0xfffe1020
-#define FUNC_MUX_CTRL_8		0xfffe1024
-#define FUNC_MUX_CTRL_9		0xfffe1028
-#define FUNC_MUX_CTRL_A		0xfffe102C
-#define FUNC_MUX_CTRL_B		0xfffe1030
-#define FUNC_MUX_CTRL_C		0xfffe1034
-#define FUNC_MUX_CTRL_D		0xfffe1038
-#define PULL_DWN_CTRL_0		0xfffe1040
-#define PULL_DWN_CTRL_1		0xfffe1044
-#define PULL_DWN_CTRL_2		0xfffe1048
-#define PULL_DWN_CTRL_3		0xfffe104c
-#define GATE_INH_CTRL_0		0xfffe1050
-#define VOLTAGE_CTRL_0		0xfffe1060
-#define TEST_DBG_CTRL_0		0xfffe1070
-
-#define MOD_CONF_CTRL_0		0xfffe1080
-
-#ifdef CONFIG_OMAP1610 /* 1610 Configuration Register */
-
-#define USB_OTG_CTRL			0xFFFB040C
-#define USB_TRANSCEIVER_CTRL	0xFFFE1064
-#define PULL_DWN_CTRL_4 0xFFFE10AC
-#define PU_PD_SEL_0		0xFFFE10B4
-#define PU_PD_SEL_1		0xFFFE10B8
-#define PU_PD_SEL_2		0xFFFE10BC
-#define PU_PD_SEL_3		0xFFFE10C0
-#define PU_PD_SEL_4		0xFFFE10C4
-
-#endif
-/*
- * Traffic Controller Memory Interface Registers
- */
-#define TCMIF_BASE		0xfffecc00
-#define IMIF_PRIO		(TCMIF_BASE + 0x00)
-#define EMIFS_PRIO_REG		(TCMIF_BASE + 0x04)
-#define EMIFF_PRIO_REG		(TCMIF_BASE + 0x08)
-#define EMIFS_CONFIG_REG	(TCMIF_BASE + 0x0c)
-#define EMIFS_CS0_CONFIG	(TCMIF_BASE + 0x10)
-#define EMIFS_CS1_CONFIG	(TCMIF_BASE + 0x14)
-#define EMIFS_CS2_CONFIG	(TCMIF_BASE + 0x18)
-#define EMIFS_CS3_CONFIG	(TCMIF_BASE + 0x1c)
-#define EMIFF_SDRAM_CONFIG	(TCMIF_BASE + 0x20)
-#define EMIFF_MRS		(TCMIF_BASE + 0x24)
-#define TC_TIMEOUT1		(TCMIF_BASE + 0x28)
-#define TC_TIMEOUT2		(TCMIF_BASE + 0x2c)
-#define TC_TIMEOUT3		(TCMIF_BASE + 0x30)
-#define TC_ENDIANISM		(TCMIF_BASE + 0x34)
-#define EMIFF_SDRAM_CONFIG_2	(TCMIF_BASE + 0x3c)
-#define EMIF_CFG_DYNAMIC_WS	(TCMIF_BASE + 0x40)
-
-/*
- * LCD Panel
- */
-#define TI925_LCD_BASE		0xFFFEC000
-#define TI925_LCD_CONTROL	(TI925_LCD_BASE)
-#define TI925_LCD_TIMING0	(TI925_LCD_BASE+0x4)
-#define TI925_LCD_TIMING1	(TI925_LCD_BASE+0x8)
-#define TI925_LCD_TIMING2	(TI925_LCD_BASE+0xc)
-#define TI925_LCD_STATUS	(TI925_LCD_BASE+0x10)
-#define TI925_LCD_SUBPANEL	(TI925_LCD_BASE+0x14)
-
-#define OMAP_LCD_CONTROL	TI925_LCD_CONTROL
-
-/* I2C Registers */
-
-#define I2C_BASE		0xfffb3800
-
-#define I2C_REV			(I2C_BASE + 0x00)
-#define I2C_IE			(I2C_BASE + 0x04)
-#define I2C_STAT		(I2C_BASE + 0x08)
-#define I2C_IV			(I2C_BASE + 0x0c)
-#define I2C_BUF			(I2C_BASE + 0x14)
-#define I2C_CNT			(I2C_BASE + 0x18)
-#define I2C_DATA		(I2C_BASE + 0x1c)
-#define I2C_CON			(I2C_BASE + 0x24)
-#define I2C_OA			(I2C_BASE + 0x28)
-#define I2C_SA			(I2C_BASE + 0x2c)
-#define I2C_PSC			(I2C_BASE + 0x30)
-#define I2C_SCLL		(I2C_BASE + 0x34)
-#define I2C_SCLH		(I2C_BASE + 0x38)
-#define I2C_SYSTEST		(I2C_BASE + 0x3c)
-
-/* I2C masks */
-
-/* I2C Interrupt Enable Register (I2C_IE): */
-
-#define I2C_IE_XRDY_IE	(1 << 4)	/* Transmit data ready interrupt enable */
-#define I2C_IE_RRDY_IE	(1 << 3)	/* Receive data ready interrupt enable */
-#define I2C_IE_ARDY_IE	(1 << 2)	/* Register access ready interrupt enable */
-#define I2C_IE_NACK_IE	(1 << 1)	/* No acknowledgment interrupt enable */
-#define I2C_IE_AL_IE	(1 << 0)	/* Arbitration lost interrupt enable */
-
-/* I2C Status Register (I2C_STAT): */
-
-#define I2C_STAT_SBD	(1 << 15)	/* Single byte data */
-#define I2C_STAT_BB	(1 << 12)	/* Bus busy */
-#define I2C_STAT_ROVR	(1 << 11)	/* Receive overrun */
-#define I2C_STAT_XUDF	(1 << 10)	/* Transmit underflow */
-#define I2C_STAT_AAS	(1 << 9)	/* Address as slave */
-#define I2C_STAT_AD0	(1 << 8)	/* Address zero */
-#define I2C_STAT_XRDY	(1 << 4)	/* Transmit data ready */
-#define I2C_STAT_RRDY	(1 << 3)	/* Receive data ready */
-#define I2C_STAT_ARDY	(1 << 2)	/* Register access ready */
-#define I2C_STAT_NACK	(1 << 1)	/* No acknowledgment interrupt enable */
-#define I2C_STAT_AL	(1 << 0)	/* Arbitration lost interrupt enable */
-
-/* I2C Interrupt Vector Register (I2C_IV): */
-
-/* I2C Interrupt Code Register (I2C_INTCODE): */
-
-#define I2C_INTCODE_MASK	7
-#define I2C_INTCODE_NONE	0
-#define I2C_INTCODE_AL		1	/* Arbitration lost */
-#define I2C_INTCODE_NAK		2	/* No acknowledgement/general call */
-#define I2C_INTCODE_ARDY	3	/* Register access ready */
-#define I2C_INTCODE_RRDY	4	/* Rcv data ready */
-#define I2C_INTCODE_XRDY	5	/* Xmit data ready */
-
-/* I2C Buffer Configuration Register (I2C_BUF): */
-
-#define I2C_BUF_RDMA_EN		(1 << 15)	/* Receive DMA channel enable */
-#define I2C_BUF_XDMA_EN		(1 << 7)	/* Transmit DMA channel enable */
-
-/* I2C Configuration Register (I2C_CON): */
-
-#define I2C_CON_EN	(1 << 15)	/* I2C module enable */
-#define I2C_CON_BE	(1 << 14)	/* Big endian mode */
-#define I2C_CON_STB	(1 << 11)	/* Start byte mode (master mode only) */
-#define I2C_CON_MST	(1 << 10)	/* Master/slave mode */
-#define I2C_CON_TRX	(1 << 9)	/* Transmitter/receiver mode (master mode only) */
-#define I2C_CON_XA	(1 << 8)	/* Expand address */
-#define I2C_CON_RM	(1 << 2)	/* Repeat mode (master mode only) */
-#define I2C_CON_STP	(1 << 1)	/* Stop condition (master mode only) */
-#define I2C_CON_STT	(1 << 0)	/* Start condition (master mode only) */
-
-/* I2C System Test Register (I2C_SYSTEST): */
-
-#define I2C_SYSTEST_ST_EN	(1 << 15)	/* System test enable */
-#define I2C_SYSTEST_FREE	(1 << 14)	/* Free running mode (on breakpoint) */
-#define I2C_SYSTEST_TMODE_MASK	(3 << 12)	/* Test mode select */
-#define I2C_SYSTEST_TMODE_SHIFT (12)		/* Test mode select */
-#define I2C_SYSTEST_SCL_I	(1 << 3)	/* SCL line sense input value */
-#define I2C_SYSTEST_SCL_O	(1 << 2)	/* SCL line drive output value */
-#define I2C_SYSTEST_SDA_I	(1 << 1)	/* SDA line sense input value */
-#define I2C_SYSTEST_SDA_O	(1 << 0)	/* SDA line drive output value */
-
-/*
- * MMC/SD Host Controller Registers
- */
-
-#define OMAP_MMC_CMD	 0xFFFB7800 /* MMC Command */
-#define OMAP_MMC_ARGL	 0xFFFB7804 /* MMC argument low */
-#define OMAP_MMC_ARGH	 0xFFFB7808 /* MMC argument high */
-#define OMAP_MMC_CON	 0xFFFB780C /* MMC system configuration */
-#define OMAP_MMC_STAT	 0xFFFB7810 /* MMC status */
-#define OMAP_MMC_IE	 0xFFFB7814 /* MMC system interrupt enable */
-#define OMAP_MMC_CTO	 0xFFFB7818 /* MMC command time-out */
-#define OMAP_MMC_DTO	 0xFFFB781C /* MMC data time-out */
-#define OMAP_MMC_DATA	 0xFFFB7820 /* MMC TX/RX FIFO data */
-#define OMAP_MMC_BLEN	 0xFFFB7824 /* MMC block length */
-#define OMAP_MMC_NBLK	 0xFFFB7828 /* MMC number of blocks */
-#define OMAP_MMC_BUF	 0xFFFB782C /* MMC buffer configuration */
-#define OMAP_MMC_SPI	 0xFFFB7830 /* MMC serial port interface */
-#define OMAP_MMC_SDIO	 0xFFFB7834 /* MMC SDIO mode configuration */
-#define OMAP_MMC_SYST	 0xFFFB7838 /* MMC system test */
-#define OMAP_MMC_REV	 0xFFFB783C /* MMC module version */
-#define OMAP_MMC_RSP0	 0xFFFB7840 /* MMC command response 0 */
-#define OMAP_MMC_RSP1	 0xFFFB7844 /* MMC command response 1 */
-#define OMAP_MMC_RSP2	 0xFFFB7848 /* MMC command response 2 */
-#define OMAP_MMC_RSP3	 0xFFFB784C /* MMC command response 3 */
-#define OMAP_MMC_RSP4	 0xFFFB7850 /* MMC command response 4 */
-#define OMAP_MMC_RSP5	 0xFFFB7854 /* MMC command response 5 */
-#define OMAP_MMC_RSP6	 0xFFFB7858 /* MMC command response 6 */
-#define OMAP_MMC_RSP7	 0xFFFB785C /* MMC command response 4 */
-
-/* MMC masks */
-
-#define OMAP_MMC_END_OF_CMD	(1 << 0)	/* End of command phase */
-#define OMAP_MMC_CARD_BUSY	(1 << 2)	/* Card enter busy state */
-#define OMAP_MMC_BLOCK_RS	(1 << 3)	/* Block received/sent */
-#define OMAP_MMC_EOF_BUSY	(1 << 4)	/* Card exit busy state */
-#define OMAP_MMC_DATA_TIMEOUT	(1 << 5)	/* Data response time-out */
-#define OMAP_MMC_DATA_CRC	(1 << 6)	/* Date CRC error */
-#define OMAP_MMC_CMD_TIMEOUT	(1 << 7)	/* Command response time-out */
-#define OMAP_MMC_CMD_CRC	(1 << 8)	/* Command CRC error */
-#define OMAP_MMC_A_FULL		(1 << 10)	/* Buffer almost full */
-#define OMAP_MMC_A_EMPTY	(1 << 11)	/* Buffer almost empty */
-#define OMAP_MMC_OCR_BUSY	(1 << 12)	/* OCR busy */
-#define OMAP_MMC_CARD_IRQ	(1 << 13)	/* Card IRQ received */
-#define OMAP_MMC_CARD_ERR	(1 << 14)	/* Card status error in response */
-
-/* 2.9.2 MPUI Interface Registers FFFE:C900 */
-
-#define MPUI_CTRL_REG		(volatile __u32 *)(0xfffec900)
-#define MPUI_DEBUG_ADDR		(volatile __u32 *)(0xfffec904)
-#define MPUI_DEBUG_DATA		(volatile __u32 *)(0xfffec908)
-#define MPUI_DEBUG_FLAG		(volatile __u16 *)(0xfffec90c)
-#define MPUI_STATUS_REG		(volatile __u16 *)(0xfffec910)
-#define MPUI_DSP_STATUS_REG	(volatile __u16 *)(0xfffec914)
-#define MPUI_DSP_BOOT_CONFIG	(volatile __u16 *)(0xfffec918)
-#define MPUI_DSP_API_CONFIG	(volatile __u16 *)(0xfffec91c)
-
-/* 2.9.6 Traffic Controller Memory Interface Registers: */
-#define OMAP_IMIF_PRIO_REG		0xfffecc00
-#define OMAP_EMIFS_PRIO_REG		0xfffecc04
-#define OMAP_EMIFF_PRIO_REG		0xfffecc08
-#define OMAP_EMIFS_CONFIG_REG		0xfffecc0c
-#define OMAP_EMIFS_CS0_CONFIG		0xfffecc10
-#define OMAP_EMIFS_CS1_CONFIG		0xfffecc14
-#define OMAP_EMIFS_CS2_CONFIG		0xfffecc18
-#define OMAP_EMIFS_CS3_CONFIG		0xfffecc1c
-#define OMAP_EMIFF_SDRAM_CONFIG		0xfffecc20
-#define OMAP_EMIFF_MRS			0xfffecc24
-#define OMAP_TIMEOUT1			0xfffecc28
-#define OMAP_TIMEOUT2			0xfffecc2c
-#define OMAP_TIMEOUT3			0xfffecc30
-#define OMAP_ENDIANISM			0xfffecc34
-
-/* 2.9.10 EMIF Slow Interface Configuration Register (EMIFS_CONFIG_REG): */
-#define OMAP_EMIFS_CONFIG_FR		(1 << 4)
-#define OMAP_EMIFS_CONFIG_PDE		(1 << 3)
-#define OMAP_EMIFS_CONFIG_PWD_EN	(1 << 2)
-#define OMAP_EMIFS_CONFIG_BM		(1 << 1)
-#define OMAP_EMIFS_CONFIG_WP		(1 << 0)
-
-/*
- * Memory chunk set aside for the Framebuffer in SRAM
- */
-#define SRAM_FRAMEBUFFER_MEMORY OMAP1510_SRAM_BASE
-
-
-/*
- * DMA
- */
-
-#define OMAP1510_DMA_BASE 0xFFFED800
-#define OMAP_DMA_BASE	  OMAP1510_DMA_BASE
-
-/* Global Register selection */
-#define NO_GLOBAL_DMA_ACCESS 0
-
-/* Channel select field
- * NOTE: all other channels are linear, chan0 is 0, chan1 is 1, etc...
- */
-#define LCD_CHANNEL 0xc
-
-/* Register Select Field (LCD) */
-#define DMA_LCD_CTRL		0
-#define DMA_LCD_TOP_F1_L	1
-#define DMA_LCD_TOP_F1_U	2
-#define DMA_LCD_BOT_F1_L	3
-#define DMA_LCD_BOT_F1_U	4
-
-#define LCD_FRAME_MODE		(1<<0)
-#define LCD_FRAME_IT_IE		(1<<1)
-#define LCD_BUS_ERROR_IT_IE	(1<<2)
-#define LCD_FRAME_1_IT_COND	(1<<3)
-#define LCD_FRAME_2_IT_COND	(1<<4)
-#define LCD_BUS_ERROR_IT_COND	(1<<5)
-#define LCD_SOURCE_IMIF		(1<<6)
-
-/*
- * Real-Time Clock
- */
-
-#define RTC_SECONDS		(volatile __u8 *)(OMAP1510_RTC_BASE + 0x00)
-#define RTC_MINUTES		(volatile __u8 *)(OMAP1510_RTC_BASE + 0x04)
-#define RTC_HOURS		(volatile __u8 *)(OMAP1510_RTC_BASE + 0x08)
-#define RTC_DAYS		(volatile __u8 *)(OMAP1510_RTC_BASE + 0x0C)
-#define RTC_MONTHS		(volatile __u8 *)(OMAP1510_RTC_BASE + 0x10)
-#define RTC_YEARS		(volatile __u8 *)(OMAP1510_RTC_BASE + 0x14)
-#define RTC_CTRL		(volatile __u8 *)(OMAP1510_RTC_BASE + 0x40)
-
-
-/* ---------------------------------------------------------------------------
- *  OMAP1510 Interrupt Handlers
- * ---------------------------------------------------------------------------
- *
- */
-#define OMAP_IH1_BASE		0xfffecb00
-#define OMAP_IH2_BASE		0xfffe0000
-#define OMAP1510_ITR		0x0
-#define OMAP1510_MASK		0x4
-
-#define INTERRUPT_HANDLER_BASE	 OMAP_IH1_BASE
-#define INTERRUPT_INPUT_REGISTER OMAP1510_ITR
-#define INTERRUPT_MASK_REGISTER	 OMAP1510_MASK
-
-
-/* ---------------------------------------------------------------------------
- *  OMAP1510 TIMERS
- * ---------------------------------------------------------------------------
- *
- */
-
-#define OMAP1510_32kHz_TIMER_BASE 0xfffb9000
-
-/* 32k Timer Registers */
-#define TIMER32k_CR	0x08
-#define TIMER32k_TVR	0x00
-#define TIMER32k_TCR	0x04
-
-/* 32k Timer Control Register definition */
-#define TIMER32k_TSS	(1<<0)
-#define TIMER32k_TRB	(1<<1)
-#define TIMER32k_INT	(1<<2)
-#define TIMER32k_ARL	(1<<3)
-
-/* MPU Timer base addresses  */
-#define OMAP1510_MPUTIMER_BASE	0xfffec500
-#define OMAP1510_MPUTIMER_OFF	0x00000100
-
-#define OMAP1510_TIMER1_BASE	0xfffec500
-#define OMAP1510_TIMER2_BASE	0xfffec600
-#define OMAP1510_TIMER3_BASE	0xfffec700
-
-/* MPU Timer Registers */
-#define CNTL_TIMER	0
-#define LOAD_TIM	4
-#define READ_TIM	8
-
-/*  CNTL_TIMER register bits */
-#define MPUTIM_FREE		(1<<6)
-#define MPUTIM_CLOCK_ENABLE	(1<<5)
-#define MPUTIM_PTV_MASK		(0x7<<MPUTIM_PTV_BIT)
-#define MPUTIM_PTV_BIT		2
-#define MPUTIM_AR		(1<<1)
-#define MPUTIM_ST		(1<<0)
-
-/* ---------------------------------------------------------------------------
- *  OMAP1510 GPIO (SHARED)
- * ---------------------------------------------------------------------------
- *
- */
-#define GPIO_DATA_INPUT_REG	(OMAP1510_GPIO_BASE + 0x0)
-#define GPIO_DATA_OUTPUT_REG	(OMAP1510_GPIO_BASE + 0x4)
-#define GPIO_DIR_CONTROL_REG	(OMAP1510_GPIO_BASE + 0x8)
-#define GPIO_INT_CONTROL_REG	(OMAP1510_GPIO_BASE + 0xc)
-#define GPIO_INT_MASK_REG	(OMAP1510_GPIO_BASE + 0x10)
-#define GPIO_INT_STATUS_REG	(OMAP1510_GPIO_BASE + 0x14)
-#define GPIO_PIN_CONTROL_REG	(OMAP1510_GPIO_BASE + 0x18)
-
-
-/* ---------------------------
- * OMAP1510 MPUIO (ARM only)
- *----------------------------
- */
-#define OMAP1510_MPUIO_BASE	0xFFFB5000
-#define MPUIO_DATA_INPUT_REG	(OMAP1510_MPUIO_BASE + 0x0)
-#define MPUIO_DATA_OUTPUT_REG	(OMAP1510_MPUIO_BASE + 0x4)
-#define MPUIO_DIR_CONTROL_REG	(OMAP1510_MPUIO_BASE + 0x8)
-
-/* ---------------------------------------------------------------------------
- *  OMAP1510 TIPB (only)
- * ---------------------------------------------------------------------------
- *
- */
-#define TIPB_PUBLIC_CNTL_BASE		0xfffed300
-#define MPU_PUBLIC_TIPB_CNTL_REG	(TIPB_PUBLIC_CNTL_BASE + 0x8)
-#define TIPB_PRIVATE_CNTL_BASE		0xfffeca00
-#define MPU_PRIVATE_TIPB_CNTL_REG	(TIPB_PRIVATE_CNTL_BASE + 0x8)
-
-/*
- * ---------------------------------------------------------------------------
- *  OMAP1510 Camera Interface
- * ---------------------------------------------------------------------------
- */
-#define CAMERA_BASE		(IO_BASE + 0x6800)
-#define CAM_CTRLCLOCK_REG	(CAMERA_BASE + 0x00)
-#define CAM_IT_STATUS_REG	(CAMERA_BASE + 0x04)
-#define CAM_MODE_REG		(CAMERA_BASE + 0x08)
-#define CAM_STATUS_REG		(CAMERA_BASE + 0x0C)
-#define CAM_CAMDATA_REG		(CAMERA_BASE + 0x10)
-#define CAM_GPIO_REG		(CAMERA_BASE + 0x14)
-#define CAM_PEAK_CTR_REG	(CAMERA_BASE + 0x18)
-
-#if 0
-#ifndef __ASSEMBLY__
-typedef struct {
-	__u32 ctrlclock;
-	__u32 it_status;
-	__u32 mode;
-	__u32 status;
-	__u32 camdata;
-	__u32 gpio;
-	__u32 peak_counter;
-} camera_regs_t;
-#endif
-#endif
-
-/* CTRLCLOCK bit shifts */
-#define FOSCMOD_BIT	0
-#define FOSCMOD_MASK	(0x7 << FOSCMOD_BIT)
-#define	 FOSCMOD_12MHz	0x0
-#define	 FOSCMOD_6MHz	0x2
-#define	 FOSCMOD_9_6MHz 0x4
-#define	 FOSCMOD_24MHz	0x5
-#define	 FOSCMOD_8MHz	0x6
-#define POLCLK		(1<<3)
-#define CAMEXCLK_EN	(1<<4)
-#define MCLK_EN		(1<<5)
-#define DPLL_EN		(1<<6)
-#define LCLK_EN		(1<<7)
-
-/* IT_STATUS bit shifts */
-#define V_UP		(1<<0)
-#define V_DOWN		(1<<1)
-#define H_UP		(1<<2)
-#define H_DOWN		(1<<3)
-#define FIFO_FULL	(1<<4)
-#define DATA_XFER	(1<<5)
-
-/* MODE bit shifts */
-#define CAMOSC		(1<<0)
-#define IMGSIZE_BIT	1
-#define IMGSIZE_MASK	(0x3 << IMGSIZE_BIT)
-#define	 IMGSIZE_CIF	(0x0 << IMGSIZE_BIT)	/* 352x288 */
-#define	 IMGSIZE_QCIF	(0x1 << IMGSIZE_BIT)	/* 176x144 */
-#define	 IMGSIZE_VGA	(0x2 << IMGSIZE_BIT)	/* 640x480 */
-#define	 IMGSIZE_QVGA	(0x3 << IMGSIZE_BIT)	/* 320x240 */
-#define ORDERCAMD	(1<<3)
-#define EN_V_UP		(1<<4)
-#define EN_V_DOWN	(1<<5)
-#define EN_H_UP		(1<<6)
-#define EN_H_DOWN	(1<<7)
-#define EN_DMA		(1<<8)
-#define THRESHOLD	(1<<9)
-#define THRESHOLD_BIT	9
-#define THRESHOLD_MASK	(0x7f<<9)
-#define EN_NIRQ		(1<<16)
-#define EN_FIFO_FULL	(1<<17)
-#define RAZ_FIFO	(1<<18)
-
-/* STATUS bit shifts */
-#define VSTATUS		(1<<0)
-#define HSTATUS		(1<<1)
-
-/* GPIO bit shifts */
-#define CAM_RST		(1<<0)
-
-
-/*********************
- * Watchdog timer.
- *********************/
-#define WDTIM_BASE	0xfffec800
-#define WDTIM_CONTROL	(WDTIM_BASE+0x00)
-#define WDTIM_LOAD	(WDTIM_BASE+0x04)
-#define WDTIM_READ	(WDTIM_BASE+0x04)
-#define WDTIM_MODE	(WDTIM_BASE+0x08)
-
-/* Values to write to mode register to disable the watchdog function. */
-#define DISABLE_SEQ1	0xF5
-#define DISABLE_SEQ2	0xA0
-
-/* WDTIM_CONTROL bit definitions. */
-#define WDTIM_CONTROL_ST	BIT7
-
-
-/* ---------------------------------------------------------------------------
- *  Differentiating processor versions for those who care.
- * ---------------------------------------------------------------------------
- *
- */
-#define OMAP1509 0
-#define OMAP1510 1
-
-#define OMAP1510_ID_CODE_REG 0xfffed404
-
-#ifndef __ASSEMBLY__
-int cpu_type(void);
-#endif
-
-/*****************************************************************************/
-
-#define CLKGEN_RESET_BASE (0xfffece00)
-#define ARM_CKCTL	(volatile __u16 *)(CLKGEN_RESET_BASE + 0x0)
-#define ARM_IDLECT1	(volatile __u16 *)(CLKGEN_RESET_BASE + 0x4)
-#define ARM_IDLECT2	(volatile __u16 *)(CLKGEN_RESET_BASE + 0x8)
-#define ARM_EWUPCT	(volatile __u16 *)(CLKGEN_RESET_BASE + 0xC)
-#define ARM_RSTCT1	(volatile __u16 *)(CLKGEN_RESET_BASE + 0x10)
-#define ARM_RSTCT2	(volatile __u16 *)(CLKGEN_RESET_BASE + 0x14)
-#define ARM_SYSST	(volatile __u16 *)(CLKGEN_RESET_BASE + 0x18)
-
-
-#define CK_CLKIN	12 /* MHz */
-#define CK_RATEF	1
-#define CK_IDLEF	2
-#define CK_ENABLEF	4
-#define CK_SELECTF	8
-#ifndef __ASSEMBLER__
-#define CK_DPLL1	((volatile __u16 *)0xfffecf00)
-#else
-#define CK_DPLL1 (0xfffecf00)
-#endif
-#define SETARM_IDLE_SHIFT
-
-/* ARM_CKCTL bit shifts */
-#define PERDIV		0
-#define LCDDIV		2
-#define ARMDIV		4
-#define DSPDIV		6
-#define TCDIV		8
-#define DSPMMUDIV	10
-#define ARM_TIMXO	12
-#define EN_DSPCK	13
-#define ARM_INTHCK_SEL	14 /* REVISIT -- where is this used? */
-
-#define ARM_CKCTL_RSRVD_BIT15		(1 << 15)
-#define ARM_CKCTL_ARM_INTHCK_SEL	(1 << 14)
-#define ARM_CKCTL_EN_DSPCK		(1 << 13)
-#define ARM_CKCTL_ARM_TIMXO		(1 << 12)
-#define ARM_CKCTL_DSPMMU_DIV1		(1 << 11)
-#define ARM_CKCTL_DSPMMU_DIV2		(1 << 10)
-#define ARM_CKCTL_TCDIV1		(1 << 9)
-#define ARM_CKCTL_TCDIV2		(1 << 8)
-#define ARM_CKCTL_DSPDIV1		(1 << 7)
-#define ARM_CKCTL_DSPDIV0		(1 << 6)
-#define ARM_CKCTL_ARMDIV1		(1 << 5)
-#define ARM_CKCTL_ARMDIV0		(1 << 4)
-#define ARM_CKCTL_LCDDIV1		(1 << 3)
-#define ARM_CKCTL_LCDDIV0		(1 << 2)
-#define ARM_CKCTL_PERDIV1		(1 << 1)
-#define ARM_CKCTL_PERDIV0		(1 << 0)
-
-/* ARM_IDLECT1 bit shifts */
-#define IDLWDT_ARM	0
-#define IDLXORP_ARM	1
-#define IDLPER_ARM	2
-#define IDLLCD_ARM	3
-#define IDLLB_ARM	4
-#define IDLHSAB_ARM	5
-#define IDLIF_ARM	6
-#define IDLDPLL_ARM	7
-#define IDLAPI_ARM	8
-#define IDLTIM_ARM	9
-#define SETARM_IDLE	11
-
-/* ARM_IDLECT2 bit shifts */
-#define EN_WDTCK	0
-#define EN_XORPCK	1
-#define EN_PERCK	2
-#define EN_LCDCK	3
-#define EN_LBCK		4
-#define EN_HSABCK	5
-#define EN_APICK	6
-#define EN_TIMCK	7
-#define DMACK_REQ	8
-#define EN_GPIOCK	9
-#define EN_LBFREECK	10
-
-#define ARM_RSTCT1_SW_RST	(1 << 3)
-#define ARM_RSTCT1_DSP_RST	(1 << 2)
-#define ARM_RSTCT1_DSP_EN	(1 << 1)
-#define ARM_RSTCT1_ARM_RST	(1 << 0)
-
-/* ARM_RSTCT2 bit shifts */
-#define EN_PER		0
-
-#define ARM_SYSST_RSRVD_BIT15	(1 << 15)
-#define ARM_SYSST_RSRVD_BIT14	(1 << 14)
-#define ARM_SYSST_CLOCK_SELECT2 (1 << 13)
-#define ARM_SYSST_CLOCK_SELECT1 (1 << 12)
-#define ARM_SYSST_CLOCK_SELECT0 (1 << 11)
-#define ARM_SYSST_RSRVD_BIT10	(1 << 10)
-#define ARM_SYSST_RSRVD_BIT9	(1 << 9)
-#define ARM_SYSST_RSRVD_BIT8	(1 << 8)
-#define ARM_SYSST_RSRVD_BIT7	(1 << 7)
-#define ARM_SYSST_IDLE_DSP	(1 << 6)
-#define ARM_SYSST_POR		(1 << 5)
-#define ARM_SYSST_EXT_RST	(1 << 4)
-#define ARM_SYSST_ARM_MCRST	(1 << 3)
-#define ARM_SYSST_ARM_WDRST	(1 << 2)
-#define ARM_SYSST_GLOB_SWRST	(1 << 1)
-#define ARM_SYSST_DSP_WDRST	(1 << 0)
-
-/* Table 15-23. DPLL Control Registers: */
-#define DPLL_CTL_REG		(volatile __u16 *)(0xfffecf00)
-
-/* Table 15-24. Control Register (CTL_REG): */
-
-#define DPLL_CTL_REG_IOB		(1 << 13)
-#define DPLL_CTL_REG_PLL_MULT		Fld(5,0)
-
-/*****************************************************************************/
-
-/* OMAP INTERRUPT REGISTERS */
-#define IRQ_ITR			0x00
-#define IRQ_MIR			0x04
-#define IRQ_SIR_IRQ		0x10
-#define IRQ_SIR_FIQ		0x14
-#define IRQ_CONTROL_REG		0x18
-#define IRQ_ISR			0x9c
-#define IRQ_ILR0		0x1c
-
-#define REG_IHL1_MIR  (OMAP_IH1_BASE+IRQ_MIR)
-#define REG_IHL2_MIR  (OMAP_IH2_BASE+IRQ_MIR)
-
-/* INTERRUPT LEVEL REGISTER BITS */
-#define ILR_PRIORITY_MASK	(0x3c)
-#define ILR_PRIORITY_SHIFT	(2)
-#define ILR_LEVEL_TRIGGER	(1<<1)
-#define ILR_FIQ			(1<<0)
-
-#define IRQ_LEVEL_INT		1
-#define IRQ_EDGE_INT		0
-
-/* Macros to access registers */
-#define outb(v,p) *(volatile u8 *) (p) = v
-#define outw(v,p) *(volatile u16 *) (p) = v
-#define outl(v,p) *(volatile u32 *) (p) = v
-
-#define inb(p)	*(volatile u8 *) (p)
-#define inw(p)	*(volatile u16 *) (p)
-#define inl(p)	*(volatile u32 *) (p)
diff --git a/include/configs/omap5912osk.h b/include/configs/omap5912osk.h
deleted file mode 100644
index 376dfdb..0000000
--- a/include/configs/omap5912osk.h
+++ /dev/null
@@ -1,174 +0,0 @@
-/*
- * (C) Copyright 2003
- * Texas Instruments.
- * Kshitij Gupta <kshitij@ti.com>
- * Configuation settings for the TI OMAP Innovator board.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-/*
- * High Level Configuration Options
- * (easy to change)
- */
-#define CONFIG_ARM926EJS	1	/* This is an arm926ejs CPU core  */
-#define CONFIG_OMAP	1			/* in a TI OMAP core    */
-#define CONFIG_OMAP1610	1		/* 5912 is same as 1610  */
-#define CONFIG_OSK_OMAP5912	1	/*  a OSK Board  */
-
-#define CONFIG_DISPLAY_CPUINFO	1	/* display cpu info (and speed)	*/
-#define CONFIG_DISPLAY_BOARDINFO 1	/* display board info		*/
-
-/* input clock of PLL */
-/* the OMAP5912 OSK has 12MHz input clock */
-#define CONFIG_SYS_CLK_FREQ	12000000
-
-#define CONFIG_CMDLINE_TAG	1	/* enable passing of ATAGs  */
-#define CONFIG_SETUP_MEMORY_TAGS	1
-#define CONFIG_INITRD_TAG      1       /* Required for ramdisk support */
-
-/*
- * Size of malloc() pool
- */
-#define CONFIG_SYS_MALLOC_LEN	(CONFIG_ENV_SIZE + 128*1024)
-
-/*
- * Hardware drivers
- */
-/*
-*/
-#define CONFIG_LAN91C96
-#define CONFIG_LAN91C96_BASE 0x04800300
-#define CONFIG_LAN91C96_EXT_PHY
-
-/*
- * NS16550 Configuration
- */
-#define CONFIG_SYS_NS16550
-#define CONFIG_SYS_NS16550_SERIAL
-#define CONFIG_SYS_NS16550_REG_SIZE	(-4)
-#define CONFIG_SYS_NS16550_CLK	(48000000)	/* can be 12M/32Khz or 48Mhz */
-#define CONFIG_SYS_NS16550_COM1	0xfffb0000	/* uart1, bluetooth uart
-						on helen */
-
-/*
- * select serial console configuration
- */
-#define CONFIG_SERIAL1	1	/* we use SERIAL 1 on OMAP5912 OSK */
-
-/* allow to overwrite serial and ethaddr */
-#define CONFIG_ENV_OVERWRITE
-#define CONFIG_CONS_INDEX	1
-#define CONFIG_BAUDRATE	115200
-
-/*
- * Command line configuration.
- */
-#include <config_cmd_default.h>
-
-#define CONFIG_CMD_DHCP
-
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_SUBNETMASK
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-#define CONFIG_BOOTP_BOOTPATH
-
-
-#include <configs/omap1510.h>
-
-#define CONFIG_BOOTDELAY	3
-#define CONFIG_BOOTARGS	"mem=32M console=ttyS0,115200n8 noinitrd \
-				root=/dev/nfs rw nfsroot=157.87.82.48:\
-				/home/mwd/myfs/target ip=dhcp"
-#define CONFIG_NETMASK	255.255.254.0	/* talk on MY local net */
-#define CONFIG_IPADDR	156.117.97.156	/* static IP I currently own */
-#define CONFIG_SERVERIP	156.117.97.139	/* current IP of my dev pc */
-#define CONFIG_BOOTFILE	"uImage"	/* file to load */
-
-#if defined(CONFIG_CMD_KGDB)
-#define CONFIG_KGDB_BAUDRATE	115200	/* speed to run kgdb serial port */
-#endif
-
-/*
- * Miscellaneous configurable options
- */
-#define CONFIG_SYS_LONGHELP	/* undef to save memory     */
-#define CONFIG_SYS_PROMPT	"OMAP5912 OSK # "	/* Monitor Command Prompt   */
-#define CONFIG_SYS_CBSIZE	256		/* Console I/O Buffer Size  */
-/* Print Buffer Size */
-#define CONFIG_SYS_PBSIZE	(CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
-#define CONFIG_SYS_MAXARGS	16		/* max number of command args   */
-#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size    */
-
-#define CONFIG_SYS_MEMTEST_START	0x10000000	/* memtest works on */
-#define CONFIG_SYS_MEMTEST_END	0x12000000	/* 32 MB in DRAM    */
-
-#define CONFIG_SYS_LOAD_ADDR	0x10000000	/* default load address */
-
-/* The 1610 has 6 timers, they can be driven by the RefClk (12Mhz) or by
- * DPLL1. This time is further subdivided by a local divisor.
- */
-#define CONFIG_SYS_TIMERBASE	0xFFFEC500	/* use timer 1 */
-#define CONFIG_SYS_PTV		7	/* 2^(PTV+1), divide by 256 */
-
-/*-----------------------------------------------------------------------
- * Physical Memory Map
- */
-#define CONFIG_NR_DRAM_BANKS	1	/* we have 1 bank of DRAM */
-#define PHYS_SDRAM_1		0x10000000	/* SDRAM Bank #1 */
-#define PHYS_SDRAM_1_SIZE	0x02000000	/* 32 MB */
-
-#define PHYS_FLASH_1		0x00000000	/* Flash Bank #1 */
-#define PHYS_FLASH_2		0x01000000	/* Flash Bank #2 */
-
-#define CONFIG_SYS_FLASH_BASE		PHYS_FLASH_1
-
-#define CONFIG_SYS_MONITOR_BASE       CONFIG_SYS_FLASH_BASE  /* Monitor at beginning of flash */
-
-#define PHYS_SRAM		0x20000000
-
-/*-----------------------------------------------------------------------
- * FLASH driver setup
- */
-#define CONFIG_SYS_FLASH_CFI          1       /* Flash memory is CFI compliant */
-#define CONFIG_FLASH_CFI_DRIVER   1       /* Use drivers/mtd/cfi_flash.c */
-
-#define CONFIG_SYS_FLASH_BANKS_LIST { PHYS_FLASH_1, PHYS_FLASH_2 }
-
-#define CONFIG_SYS_MAX_FLASH_BANKS	2	/* max number of memory banks */
-#define PHYS_FLASH_SIZE	0x02000000	/* 32MB */
-#define CONFIG_SYS_MAX_FLASH_SECT	(259)	/* max number of sectors on one chip */
-
-#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE     1       /* Use buffered writes (~10x faster) */
-#define CONFIG_SYS_FLASH_PROTECTION   1       /* Use hardware sector protection */
-
-#define CONFIG_SYS_FLASH_EMPTY_INFO		/* print 'E' for empty sector on flinfo */
-
-/* timeout values are in ticks */
-#define CONFIG_SYS_FLASH_ERASE_TOUT	(20*CONFIG_SYS_HZ)	/* Timeout for Flash Erase */
-#define CONFIG_SYS_FLASH_WRITE_TOUT	(20*CONFIG_SYS_HZ)	/* Timeout for Flash Write */
-
-/*-----------------------------------------------------------------------
- * FLASH and environment organization
- */
-#define CONFIG_ENV_IS_IN_FLASH	1
-/* addr of environment */
-#define CONFIG_ENV_ADDR	(CONFIG_SYS_FLASH_BASE + CONFIG_ENV_OFFSET)
-
-#define CONFIG_ENV_SIZE		0x20000	/* Total Size of Environment Sector */
-#define CONFIG_ENV_OFFSET	0x40000	/* environment starts here  */
-
-#define CONFIG_SYS_SDRAM_BASE		PHYS_SDRAM_1
-#define CONFIG_SYS_INIT_RAM_ADDR        PHYS_SRAM
-#define CONFIG_SYS_INIT_RAM_SIZE        (250 * 1024)
-#define CONFIG_SYS_INIT_SP_ADDR         (CONFIG_SYS_INIT_RAM_ADDR + \
-					 CONFIG_SYS_INIT_RAM_SIZE)
-
-#endif							/* __CONFIG_H */