imx: add container target
To support SPL loading container file, add a new Makefile target,
and introduce a new Kconfig file to source the cfg file which
will be parsed by mkimage.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
diff --git a/Makefile b/Makefile
index 54da5cd..733bcec 100644
--- a/Makefile
+++ b/Makefile
@@ -1365,9 +1365,17 @@
$(Q)$(MAKE) $(build)=arch/arm/mach-imx $@
ifeq ($(CONFIG_ARCH_IMX8M)$(CONFIG_ARCH_IMX8), y)
+ifeq ($(CONFIG_SPL_LOAD_IMX_CONTAINER), y)
+u-boot.cnt: u-boot.bin FORCE
+ $(Q)$(MAKE) $(build)=arch/arm/mach-imx $@
+
+flash.bin: spl/u-boot-spl.bin u-boot.cnt FORCE
+ $(Q)$(MAKE) $(build)=arch/arm/mach-imx $@
+else
flash.bin: spl/u-boot-spl.bin u-boot.itb FORCE
$(Q)$(MAKE) $(build)=arch/arm/mach-imx $@
endif
+endif
u-boot-with-spl.imx u-boot-with-nand-spl.imx: SPL u-boot.bin FORCE
$(Q)$(MAKE) $(build)=arch/arm/mach-imx $@
diff --git a/arch/arm/mach-imx/Makefile b/arch/arm/mach-imx/Makefile
index 08ee52e..17b241a 100644
--- a/arch/arm/mach-imx/Makefile
+++ b/arch/arm/mach-imx/Makefile
@@ -90,6 +90,11 @@
$(Q)mkdir -p $(dir $@)
$(call if_changed_dep,cpp_cfg)
+IMX_CONTAINER_CFG = $(CONFIG_IMX_CONTAINER_CFG:"%"=%)
+container.cfg: $(IMX_CONTAINER_CFG) FORCE
+ $(Q)mkdir -p $(dir $@)
+ $(call if_changed_dep,cpp_cfg)
+
ifeq ($(CONFIG_ARCH_IMX8), y)
CNTR_DEPFILES := $(srctree)/tools/imx_cntr_image.sh
IMAGE_TYPE := imx8image
@@ -158,10 +163,15 @@
MKIMAGEFLAGS_flash.bin = -n spl/u-boot-spl.cfgout -T $(IMAGE_TYPE) -e 0x100000
flash.bin: MKIMAGEOUTPUT = flash.log
-flash.bin: spl/u-boot-spl.bin u-boot.itb FORCE
-ifeq ($(SPL_DEPFILE_EXISTS),0)
+MKIMAGEFLAGS_u-boot.cnt = -n container.cfg -T $(IMAGE_TYPE) -e 0x100000
+u-boot.cnt: MKIMAGEOUTPUT = u-boot.cnt.log
+
+ifeq ($(CONFIG_SPL_LOAD_IMX_CONTAINER), y)
+u-boot.cnt: u-boot.bin container.cfg FORCE
$(call if_changed,mkimage)
endif
+flash.bin: spl/u-boot-spl.bin FORCE
+ $(call if_changed,mkimage)
endif
else
diff --git a/arch/arm/mach-imx/imx8/Kconfig b/arch/arm/mach-imx/imx8/Kconfig
index e9496cb..d17760e 100644
--- a/arch/arm/mach-imx/imx8/Kconfig
+++ b/arch/arm/mach-imx/imx8/Kconfig
@@ -29,6 +29,13 @@
help
This is to let SPL could load i.MX8 Container image
+config IMX_CONTAINER_CFG
+ string "i.MX Container config file"
+ depends on SPL
+ help
+ This is to specific the cfg file for generating container
+ image which will be loaded by SPL.
+
choice
prompt "i.MX8 board select"
optional