Enable high speed support for USB device framework and usbtty
This patch adds the support for high speed in usb device framework and usbtty
driver. This feature has been kept within a macro CONFIG_USBD_HS, so the board
configuration files have to define this macro to enable high speed support.
Along with that specific peripheral drivers also need to define a function to
let the framework know that the enumeration has happened at high speed.
This function prototype is "int is_usbd_high_speed(void)"
Signed-off-by: Vipin Kumar <vipin.kumar@st.com>
Signed-off-by: Amit Virdi <amit.virdi@st.com>
diff --git a/drivers/serial/usbtty.c b/drivers/serial/usbtty.c
index a263b2c..e47cb9a 100644
--- a/drivers/serial/usbtty.c
+++ b/drivers/serial/usbtty.c
@@ -133,6 +133,19 @@
};
+#if defined(CONFIG_USBD_HS)
+static struct usb_qualifier_descriptor qualifier_descriptor = {
+ .bLength = sizeof(struct usb_qualifier_descriptor),
+ .bDescriptorType = USB_DT_QUAL,
+ .bcdUSB = cpu_to_le16(USB_BCD_VERSION),
+ .bDeviceClass = COMMUNICATIONS_DEVICE_CLASS,
+ .bDeviceSubClass = 0x00,
+ .bDeviceProtocol = 0x00,
+ .bMaxPacketSize0 = EP0_MAX_PACKET_SIZE,
+ .bNumConfigurations = NUM_CONFIGS
+};
+#endif
+
/*
* Static CDC ACM specific descriptors
*/
@@ -638,6 +651,9 @@
memset (device_instance, 0, sizeof (struct usb_device_instance));
device_instance->device_state = STATE_INIT;
device_instance->device_descriptor = &device_descriptor;
+#if defined(CONFIG_USBD_HS)
+ device_instance->qualifier_descriptor = &qualifier_descriptor;
+#endif
device_instance->event = usbtty_event_handler;
device_instance->cdc_recv_setup = usbtty_cdc_setup;
device_instance->bus = bus_instance;
@@ -751,6 +767,10 @@
device_descriptor.idProduct =
cpu_to_le16(CONFIG_USBD_PRODUCTID_CDCACM);
+#if defined(CONFIG_USBD_HS)
+ qualifier_descriptor.bDeviceClass =
+ COMMUNICATIONS_DEVICE_CLASS;
+#endif
/* Assign endpoint indices */
tx_endpoint = ACM_TX_ENDPOINT;
rx_endpoint = ACM_RX_ENDPOINT;
@@ -779,7 +799,9 @@
device_descriptor.bDeviceClass = 0xFF;
device_descriptor.idProduct =
cpu_to_le16(CONFIG_USBD_PRODUCTID_GSERIAL);
-
+#if defined(CONFIG_USBD_HS)
+ qualifier_descriptor.bDeviceClass = 0xFF;
+#endif
/* Assign endpoint indices */
tx_endpoint = GSERIAL_TX_ENDPOINT;
rx_endpoint = GSERIAL_RX_ENDPOINT;
@@ -932,6 +954,9 @@
static void usbtty_event_handler (struct usb_device_instance *device,
usb_device_event_t event, int data)
{
+#if defined(CONFIG_USBD_HS)
+ int i;
+#endif
switch (event) {
case DEVICE_RESET:
case DEVICE_BUS_INACTIVE:
@@ -942,6 +967,29 @@
break;
case DEVICE_ADDRESS_ASSIGNED:
+#if defined(CONFIG_USBD_HS)
+ /*
+ * is_usbd_high_speed routine needs to be defined by
+ * specific gadget driver
+ * It returns TRUE if device enumerates at High speed
+ * Retuns FALSE otherwise
+ */
+ for (i = 0; i < NUM_ENDPOINTS; i++) {
+ if (((ep_descriptor_ptrs[i]->bmAttributes &
+ USB_ENDPOINT_XFERTYPE_MASK) ==
+ USB_ENDPOINT_XFER_BULK)
+ && is_usbd_high_speed()) {
+
+ ep_descriptor_ptrs[i]->wMaxPacketSize =
+ CONFIG_USBD_SERIAL_BULK_HS_PKTSIZE;
+ }
+
+ endpoint_instance[i + 1].tx_packetSize =
+ ep_descriptor_ptrs[i]->wMaxPacketSize;
+ endpoint_instance[i + 1].rcv_packetSize =
+ ep_descriptor_ptrs[i]->wMaxPacketSize;
+ }
+#endif
usbtty_init_endpoints ();
default: