imx: fix exception vectors relocation in imx27
Commit 3ff46cc4 fixed exception vectors setting in
the general ARM case, by either copying the exception
and indirect vector tables to normal (0x00000000) or
high (0xFFFF0000) vectors address, or setting VBAR to
U-Boot's base if applicable.
i.MX27 SoC is ARM926E-JS, thus has only normal and
high options, but does not provide RAM at 0xFFFF0000
and has only ROM at 0x00000000; it is therefore not
possible to move or change its exception vectors.
Besides, i.MX27 ROM code does provide an indirect
vectors table but at a non-standard address and with
the reset and reserved vectors missing.
Turn the current vector relocation code into a weak
routine called after relocate_code from crt0, and add
strong version for i.MX27.
Series-Cc: Heiko Schocher <hs@denx.de>
Signed-off-by: Albert ARIBAUD <albert.u.boot@aribaud.net>
Reviewed-by: Stefano Babic <sbabic@denx.de>
Tested-by: Stefano Babic <sbabic@denx.de>
Tested-by: Philippe Reynes <tremyfr@gmail.com>
Tested-by: Philippe Reynes <tremyfr@yahoo.fr>
diff --git a/arch/arm/cpu/arm926ejs/mx27/Makefile b/arch/arm/cpu/arm926ejs/mx27/Makefile
index 4976bbb..0edf144 100644
--- a/arch/arm/cpu/arm926ejs/mx27/Makefile
+++ b/arch/arm/cpu/arm926ejs/mx27/Makefile
@@ -5,3 +5,7 @@
# SPDX-License-Identifier: GPL-2.0+
obj-y = generic.o reset.o timer.o
+
+ifndef CONFIG_SPL_BUILD
+obj-y += relocate.o
+endif
diff --git a/arch/arm/cpu/arm926ejs/mx27/relocate.S b/arch/arm/cpu/arm926ejs/mx27/relocate.S
new file mode 100644
index 0000000..0c4b272
--- /dev/null
+++ b/arch/arm/cpu/arm926ejs/mx27/relocate.S
@@ -0,0 +1,51 @@
+/*
+ * relocate - i.MX27-specific vector relocation
+ *
+ * Copyright (c) 2013 Albert ARIBAUD <albert.u.boot@aribaud.net>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <asm-offsets.h>
+#include <config.h>
+#include <linux/linkage.h>
+
+/*
+ * The i.MX27 SoC is very specific with respect to exceptions: it
+ * does not provide RAM at the high vectors address (0xFFFF0000),
+ * thus only the low address (0x00000000) is useable; but that is
+ * in ROM. Therefore, vectors cannot be changed at all.
+ *
+ * However, these ROM-based vectors actually just perform indirect
+ * calls through pointers located in RAM at SoC-specific addresses,
+ * as follows:
+ *
+ * Offset Exception Use by ROM code
+ * 0x00000000 reset indirect branch to [0x00000014]
+ * 0x00000004 undefined instruction indirect branch to [0xfffffef0]
+ * 0x00000008 software interrupt indirect branch to [0xfffffef4]
+ * 0x0000000c prefetch abort indirect branch to [0xfffffef8]
+ * 0x00000010 data abort indirect branch to [0xfffffefc]
+ * 0x00000014 (reserved in ARMv5) vector to ROM reset: 0xc0000000
+ * 0x00000018 IRQ indirect branch to [0xffffff00]
+ * 0x0000001c FIQ indirect branch to [0xffffff04]
+ *
+ * In order to initialize exceptions on i.MX27, we must copy U-Boot's
+ * indirect (not exception!) vector table into 0xfffffef0..0xffffff04
+ * taking care not to copy vectors number 5 (reserved exception).
+ */
+
+ .section .text.relocate_vectors,"ax",%progbits
+
+ENTRY(relocate_vectors)
+
+ ldr r0, [r9, #GD_RELOCADDR] /* r0 = gd->relocaddr */
+ ldr r1, =32 /* size of vector table */
+ add r0, r0, r1 /* skip to indirect table */
+ ldr r1, =0xFFFFFEF0 /* i.MX27 indirect table */
+ ldmia r0!, {r2-r8} /* load indirect vectors 1..7 */
+ stmia r1!, {r2-r5, r7,r8} /* write all but vector 5 */
+
+ bx lr
+
+ENDPROC(relocate_vectors)
diff --git a/arch/arm/lib/crt0.S b/arch/arm/lib/crt0.S
index 29cdad0..a33ad3e 100644
--- a/arch/arm/lib/crt0.S
+++ b/arch/arm/lib/crt0.S
@@ -104,6 +104,11 @@
ldr r0, [r9, #GD_RELOCADDR] /* r0 = gd->relocaddr */
b relocate_code
here:
+/*
+ * now relocate vectors
+ */
+
+ bl relocate_vectors
/* Set up final (full) environment */
diff --git a/arch/arm/lib/relocate.S b/arch/arm/lib/relocate.S
index 6ede41c..92f5314 100644
--- a/arch/arm/lib/relocate.S
+++ b/arch/arm/lib/relocate.S
@@ -11,6 +11,47 @@
#include <linux/linkage.h>
/*
+ * Default/weak exception vectors relocation routine
+ *
+ * This routine covers the standard ARM cases: normal (0x00000000),
+ * high (0xffff0000) and VBAR. SoCs which do not comply with any of
+ * the standard cases must provide their own, strong, version.
+ */
+
+ .section .text.relocate_vectors,"ax",%progbits
+ .weak relocate_vectors
+
+ENTRY(relocate_vectors)
+
+#ifdef CONFIG_HAS_VBAR
+ /*
+ * If the ARM processor has the security extensions,
+ * use VBAR to relocate the exception vectors.
+ */
+ ldr r0, [r9, #GD_RELOCADDR] /* r0 = gd->relocaddr */
+ mcr p15, 0, r0, c12, c0, 0 /* Set VBAR */
+#else
+ /*
+ * Copy the relocated exception vectors to the
+ * correct address
+ * CP15 c1 V bit gives us the location of the vectors:
+ * 0x00000000 or 0xFFFF0000.
+ */
+ ldr r0, [r9, #GD_RELOCADDR] /* r0 = gd->relocaddr */
+ mrc p15, 0, r2, c1, c0, 0 /* V bit (bit[13]) in CP15 c1 */
+ ands r2, r2, #(1 << 13)
+ ldreq r1, =0x00000000 /* If V=0 */
+ ldrne r1, =0xFFFF0000 /* If V=1 */
+ ldmia r0!, {r2-r8,r10}
+ stmia r1!, {r2-r8,r10}
+ ldmia r0!, {r2-r8,r10}
+ stmia r1!, {r2-r8,r10}
+#endif
+ bx lr
+
+ENDPROC(relocate_vectors)
+
+/*
* void relocate_code(addr_moni)
*
* This function relocates the monitor code.
@@ -54,34 +95,6 @@
cmp r2, r3
blo fixloop
- /*
- * Relocate the exception vectors
- */
-#ifdef CONFIG_HAS_VBAR
- /*
- * If the ARM processor has the security extensions,
- * use VBAR to relocate the exception vectors.
- */
- ldr r0, [r9, #GD_RELOCADDR] /* r0 = gd->relocaddr */
- mcr p15, 0, r0, c12, c0, 0 /* Set VBAR */
-#else
- /*
- * Copy the relocated exception vectors to the
- * correct address
- * CP15 c1 V bit gives us the location of the vectors:
- * 0x00000000 or 0xFFFF0000.
- */
- ldr r0, [r9, #GD_RELOCADDR] /* r0 = gd->relocaddr */
- mrc p15, 0, r2, c1, c0, 0 /* V bit (bit[13]) in CP15 c1 */
- ands r2, r2, #(1 << 13)
- ldreq r1, =0x00000000 /* If V=0 */
- ldrne r1, =0xFFFF0000 /* If V=1 */
- ldmia r0!, {r2-r8,r10}
- stmia r1!, {r2-r8,r10}
- ldmia r0!, {r2-r8,r10}
- stmia r1!, {r2-r8,r10}
-#endif
-
relocate_done:
#ifdef __XSCALE__