x86: qemu: Move qfw command over to cmd and add Kconfig entry

- Move the command portion of arch/x86/cpu/qemu/fw_cfg.c into
  cmd/qemu_fw_cfg.c
- Move arch/x86/include/asm/fw_cfg.h to include/qemu_fw_cfg.h
- Rename ACPI table portion to arch/x86/cpu/qemu/acpi_table.c

Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
diff --git a/arch/x86/cpu/qemu/Makefile b/arch/x86/cpu/qemu/Makefile
index 6eeddf1..97b965c 100644
--- a/arch/x86/cpu/qemu/Makefile
+++ b/arch/x86/cpu/qemu/Makefile
@@ -7,4 +7,5 @@
 ifndef CONFIG_EFI_STUB
 obj-y += car.o dram.o
 endif
-obj-y += cpu.o fw_cfg.o qemu.o
+obj-y += cpu.o qemu.o
+obj-$(CONFIG_QEMU_ACPI_TABLE) += acpi_table.o
diff --git a/arch/x86/cpu/qemu/acpi_table.c b/arch/x86/cpu/qemu/acpi_table.c
new file mode 100644
index 0000000..49381ac
--- /dev/null
+++ b/arch/x86/cpu/qemu/acpi_table.c
@@ -0,0 +1,243 @@
+/*
+ * (C) Copyright 2015 Miao Yan <yanmiaobest@gmail.com>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <common.h>
+#include <command.h>
+#include <errno.h>
+#include <malloc.h>
+#include <qemu_fw_cfg.h>
+#include <asm/io.h>
+#include <asm/tables.h>
+#include <asm/e820.h>
+#include <linux/list.h>
+#include <memalign.h>
+
+/*
+ * This function allocates memory for ACPI tables
+ *
+ * @entry : BIOS linker command entry which tells where to allocate memory
+ *          (either high memory or low memory)
+ * @addr  : The address that should be used for low memory allcation. If the
+ *          memory allocation request is 'ZONE_HIGH' then this parameter will
+ *          be ignored.
+ * @return: 0 on success, or negative value on failure
+ */
+static int bios_linker_allocate(struct bios_linker_entry *entry, u32 *addr)
+{
+	uint32_t size, align;
+	struct fw_file *file;
+	unsigned long aligned_addr;
+
+	align = le32_to_cpu(entry->alloc.align);
+	/* align must be power of 2 */
+	if (align & (align - 1)) {
+		printf("error: wrong alignment %u\n", align);
+		return -EINVAL;
+	}
+
+	file = qemu_fwcfg_find_file(entry->alloc.file);
+	if (!file) {
+		printf("error: can't find file %s\n", entry->alloc.file);
+		return -ENOENT;
+	}
+
+	size = be32_to_cpu(file->cfg.size);
+
+	/*
+	 * ZONE_HIGH means we need to allocate from high memory, since
+	 * malloc space is already at the end of RAM, so we directly use it.
+	 * If allocation zone is ZONE_FSEG, then we use the 'addr' passed
+	 * in which is low memory
+	 */
+	if (entry->alloc.zone == BIOS_LINKER_LOADER_ALLOC_ZONE_HIGH) {
+		aligned_addr = (unsigned long)memalign(align, size);
+		if (!aligned_addr) {
+			printf("error: allocating resource\n");
+			return -ENOMEM;
+		}
+	} else if (entry->alloc.zone == BIOS_LINKER_LOADER_ALLOC_ZONE_FSEG) {
+		aligned_addr = ALIGN(*addr, align);
+	} else {
+		printf("error: invalid allocation zone\n");
+		return -EINVAL;
+	}
+
+	debug("bios_linker_allocate: allocate file %s, size %u, zone %d, align %u, addr 0x%lx\n",
+	      file->cfg.name, size, entry->alloc.zone, align, aligned_addr);
+
+	qemu_fwcfg_read_entry(be16_to_cpu(file->cfg.select),
+			      size, (void *)aligned_addr);
+	file->addr = aligned_addr;
+
+	/* adjust address for low memory allocation */
+	if (entry->alloc.zone == BIOS_LINKER_LOADER_ALLOC_ZONE_FSEG)
+		*addr = (aligned_addr + size);
+
+	return 0;
+}
+
+/*
+ * This function patches ACPI tables previously loaded
+ * by bios_linker_allocate()
+ *
+ * @entry : BIOS linker command entry which tells how to patch
+ *          ACPI tables
+ * @return: 0 on success, or negative value on failure
+ */
+static int bios_linker_add_pointer(struct bios_linker_entry *entry)
+{
+	struct fw_file *dest, *src;
+	uint32_t offset = le32_to_cpu(entry->pointer.offset);
+	uint64_t pointer = 0;
+
+	dest = qemu_fwcfg_find_file(entry->pointer.dest_file);
+	if (!dest || !dest->addr)
+		return -ENOENT;
+	src = qemu_fwcfg_find_file(entry->pointer.src_file);
+	if (!src || !src->addr)
+		return -ENOENT;
+
+	debug("bios_linker_add_pointer: dest->addr 0x%lx, src->addr 0x%lx, offset 0x%x size %u, 0x%llx\n",
+	      dest->addr, src->addr, offset, entry->pointer.size, pointer);
+
+	memcpy(&pointer, (char *)dest->addr + offset, entry->pointer.size);
+	pointer	= le64_to_cpu(pointer);
+	pointer += (unsigned long)src->addr;
+	pointer	= cpu_to_le64(pointer);
+	memcpy((char *)dest->addr + offset, &pointer, entry->pointer.size);
+
+	return 0;
+}
+
+/*
+ * This function updates checksum fields of ACPI tables previously loaded
+ * by bios_linker_allocate()
+ *
+ * @entry : BIOS linker command entry which tells where to update ACPI table
+ *          checksums
+ * @return: 0 on success, or negative value on failure
+ */
+static int bios_linker_add_checksum(struct bios_linker_entry *entry)
+{
+	struct fw_file *file;
+	uint8_t *data, cksum = 0;
+	uint8_t *cksum_start;
+
+	file = qemu_fwcfg_find_file(entry->cksum.file);
+	if (!file || !file->addr)
+		return -ENOENT;
+
+	data = (uint8_t *)(file->addr + le32_to_cpu(entry->cksum.offset));
+	cksum_start = (uint8_t *)(file->addr + le32_to_cpu(entry->cksum.start));
+	cksum = table_compute_checksum(cksum_start,
+				       le32_to_cpu(entry->cksum.length));
+	*data = cksum;
+
+	return 0;
+}
+
+unsigned install_e820_map(unsigned max_entries, struct e820entry *entries)
+{
+	entries[0].addr = 0;
+	entries[0].size = ISA_START_ADDRESS;
+	entries[0].type = E820_RAM;
+
+	entries[1].addr = ISA_START_ADDRESS;
+	entries[1].size = ISA_END_ADDRESS - ISA_START_ADDRESS;
+	entries[1].type = E820_RESERVED;
+
+	/*
+	 * since we use memalign(malloc) to allocate high memory for
+	 * storing ACPI tables, we need to reserve them in e820 tables,
+	 * otherwise kernel will reclaim them and data will be corrupted
+	 */
+	entries[2].addr = ISA_END_ADDRESS;
+	entries[2].size = gd->relocaddr - TOTAL_MALLOC_LEN - ISA_END_ADDRESS;
+	entries[2].type = E820_RAM;
+
+	/* for simplicity, reserve entire malloc space */
+	entries[3].addr = gd->relocaddr - TOTAL_MALLOC_LEN;
+	entries[3].size = TOTAL_MALLOC_LEN;
+	entries[3].type = E820_RESERVED;
+
+	entries[4].addr = gd->relocaddr;
+	entries[4].size = gd->ram_size - gd->relocaddr;
+	entries[4].type = E820_RESERVED;
+
+	entries[5].addr = CONFIG_PCIE_ECAM_BASE;
+	entries[5].size = CONFIG_PCIE_ECAM_SIZE;
+	entries[5].type = E820_RESERVED;
+
+	return 6;
+}
+
+/* This function loads and patches ACPI tables provided by QEMU */
+u32 write_acpi_tables(u32 addr)
+{
+	int i, ret = 0;
+	struct fw_file *file;
+	struct bios_linker_entry *table_loader;
+	struct bios_linker_entry *entry;
+	uint32_t size;
+
+	/* make sure fw_list is loaded */
+	ret = qemu_fwcfg_read_firmware_list();
+	if (ret) {
+		printf("error: can't read firmware file list\n");
+		return addr;
+	}
+
+	file = qemu_fwcfg_find_file("etc/table-loader");
+	if (!file) {
+		printf("error: can't find etc/table-loader\n");
+		return addr;
+	}
+
+	size = be32_to_cpu(file->cfg.size);
+	if ((size % sizeof(*entry)) != 0) {
+		printf("error: table-loader maybe corrupted\n");
+		return addr;
+	}
+
+	table_loader = malloc(size);
+	if (!table_loader) {
+		printf("error: no memory for table-loader\n");
+		return addr;
+	}
+
+	qemu_fwcfg_read_entry(be16_to_cpu(file->cfg.select),
+			      size, table_loader);
+
+	for (i = 0; i < (size / sizeof(*entry)); i++) {
+		entry = table_loader + i;
+		switch (le32_to_cpu(entry->command)) {
+		case BIOS_LINKER_LOADER_COMMAND_ALLOCATE:
+			ret = bios_linker_allocate(entry, &addr);
+			if (ret)
+				goto out;
+			break;
+		case BIOS_LINKER_LOADER_COMMAND_ADD_POINTER:
+			ret = bios_linker_add_pointer(entry);
+			if (ret)
+				goto out;
+			break;
+		case BIOS_LINKER_LOADER_COMMAND_ADD_CHECKSUM:
+			ret = bios_linker_add_checksum(entry);
+			if (ret)
+				goto out;
+			break;
+		default:
+			break;
+		}
+	}
+
+out:
+	if (ret)
+		qemu_fwcfg_free_files();
+
+	free(table_loader);
+	return addr;
+}
diff --git a/arch/x86/cpu/qemu/cpu.c b/arch/x86/cpu/qemu/cpu.c
index a1b70c6..4d2989a 100644
--- a/arch/x86/cpu/qemu/cpu.c
+++ b/arch/x86/cpu/qemu/cpu.c
@@ -8,8 +8,8 @@
 #include <cpu.h>
 #include <dm.h>
 #include <errno.h>
+#include <qemu_fw_cfg.h>
 #include <asm/cpu.h>
-#include <asm/fw_cfg.h>
 
 DECLARE_GLOBAL_DATA_PTR;
 
diff --git a/arch/x86/cpu/qemu/fw_cfg.c b/arch/x86/cpu/qemu/fw_cfg.c
deleted file mode 100644
index 2e2794e..0000000
--- a/arch/x86/cpu/qemu/fw_cfg.c
+++ /dev/null
@@ -1,570 +0,0 @@
-/*
- * (C) Copyright 2015 Miao Yan <yanmiaobest@gmail.com>
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <common.h>
-#include <command.h>
-#include <errno.h>
-#include <malloc.h>
-#include <asm/io.h>
-#include <asm/fw_cfg.h>
-#include <asm/tables.h>
-#include <asm/e820.h>
-#include <linux/list.h>
-#include <memalign.h>
-
-static bool fwcfg_present;
-static bool fwcfg_dma_present;
-
-static LIST_HEAD(fw_list);
-
-/* Read configuration item using fw_cfg PIO interface */
-static void qemu_fwcfg_read_entry_pio(uint16_t entry,
-		uint32_t size, void *address)
-{
-	uint32_t i = 0;
-	uint8_t *data = address;
-
-	/*
-	 * writting FW_CFG_INVALID will cause read operation to resume at
-	 * last offset, otherwise read will start at offset 0
-	 */
-	if (entry != FW_CFG_INVALID)
-		outw(entry, FW_CONTROL_PORT);
-	while (size--)
-		data[i++] = inb(FW_DATA_PORT);
-}
-
-/* Read configuration item using fw_cfg DMA interface */
-static void qemu_fwcfg_read_entry_dma(uint16_t entry,
-		uint32_t size, void *address)
-{
-	struct fw_cfg_dma_access dma;
-
-	dma.length = cpu_to_be32(size);
-	dma.address = cpu_to_be64((uintptr_t)address);
-	dma.control = cpu_to_be32(FW_CFG_DMA_READ);
-
-	/*
-	 * writting FW_CFG_INVALID will cause read operation to resume at
-	 * last offset, otherwise read will start at offset 0
-	 */
-	if (entry != FW_CFG_INVALID)
-		dma.control |= cpu_to_be32(FW_CFG_DMA_SELECT | (entry << 16));
-
-	barrier();
-
-	debug("qemu_fwcfg_dma_read_entry: addr %p, length %u control 0x%x\n",
-	      address, size, be32_to_cpu(dma.control));
-
-	outl(cpu_to_be32((uint32_t)&dma), FW_DMA_PORT_HIGH);
-
-	while (be32_to_cpu(dma.control) & ~FW_CFG_DMA_ERROR)
-		__asm__ __volatile__ ("pause");
-}
-
-static bool qemu_fwcfg_present(void)
-{
-	uint32_t qemu;
-
-	qemu_fwcfg_read_entry_pio(FW_CFG_SIGNATURE, 4, &qemu);
-	return be32_to_cpu(qemu) == QEMU_FW_CFG_SIGNATURE;
-}
-
-static bool qemu_fwcfg_dma_present(void)
-{
-	uint8_t dma_enabled;
-
-	qemu_fwcfg_read_entry_pio(FW_CFG_ID, 1, &dma_enabled);
-	if (dma_enabled & FW_CFG_DMA_ENABLED)
-		return true;
-
-	return false;
-}
-
-static void qemu_fwcfg_read_entry(uint16_t entry,
-		uint32_t length, void *address)
-{
-	if (fwcfg_dma_present)
-		qemu_fwcfg_read_entry_dma(entry, length, address);
-	else
-		qemu_fwcfg_read_entry_pio(entry, length, address);
-}
-
-int qemu_fwcfg_online_cpus(void)
-{
-	uint16_t nb_cpus;
-
-	if (!fwcfg_present)
-		return -ENODEV;
-
-	qemu_fwcfg_read_entry(FW_CFG_NB_CPUS, 2, &nb_cpus);
-
-	return le16_to_cpu(nb_cpus);
-}
-
-/*
- * This function prepares kernel for zboot. It loads kernel data
- * to 'load_addr', initrd to 'initrd_addr' and kernel command
- * line using qemu fw_cfg interface.
- */
-static int qemu_fwcfg_setup_kernel(void *load_addr, void *initrd_addr)
-{
-	char *data_addr;
-	uint32_t setup_size, kernel_size, cmdline_size, initrd_size;
-
-	qemu_fwcfg_read_entry(FW_CFG_SETUP_SIZE, 4, &setup_size);
-	qemu_fwcfg_read_entry(FW_CFG_KERNEL_SIZE, 4, &kernel_size);
-
-	if (setup_size == 0 || kernel_size == 0) {
-		printf("warning: no kernel available\n");
-		return -1;
-	}
-
-	data_addr = load_addr;
-	qemu_fwcfg_read_entry(FW_CFG_SETUP_DATA,
-			      le32_to_cpu(setup_size), data_addr);
-	data_addr += le32_to_cpu(setup_size);
-
-	qemu_fwcfg_read_entry(FW_CFG_KERNEL_DATA,
-			      le32_to_cpu(kernel_size), data_addr);
-	data_addr += le32_to_cpu(kernel_size);
-
-	data_addr = initrd_addr;
-	qemu_fwcfg_read_entry(FW_CFG_INITRD_SIZE, 4, &initrd_size);
-	if (initrd_size == 0) {
-		printf("warning: no initrd available\n");
-	} else {
-		qemu_fwcfg_read_entry(FW_CFG_INITRD_DATA,
-				      le32_to_cpu(initrd_size), data_addr);
-		data_addr += le32_to_cpu(initrd_size);
-	}
-
-	qemu_fwcfg_read_entry(FW_CFG_CMDLINE_SIZE, 4, &cmdline_size);
-	if (cmdline_size) {
-		qemu_fwcfg_read_entry(FW_CFG_CMDLINE_DATA,
-				      le32_to_cpu(cmdline_size), data_addr);
-		/*
-		 * if kernel cmdline only contains '\0', (e.g. no -append
-		 * when invoking qemu), do not update bootargs
-		 */
-		if (*data_addr != '\0') {
-			if (setenv("bootargs", data_addr) < 0)
-				printf("warning: unable to change bootargs\n");
-		}
-	}
-
-	printf("loading kernel to address %p size %x", load_addr,
-	       le32_to_cpu(kernel_size));
-	if (initrd_size)
-		printf(" initrd %p size %x\n",
-		       initrd_addr,
-		       le32_to_cpu(initrd_size));
-	else
-		printf("\n");
-
-	return 0;
-}
-
-static int qemu_fwcfg_read_firmware_list(void)
-{
-	int i;
-	uint32_t count;
-	struct fw_file *file;
-	struct list_head *entry;
-
-	/* don't read it twice */
-	if (!list_empty(&fw_list))
-		return 0;
-
-	qemu_fwcfg_read_entry(FW_CFG_FILE_DIR, 4, &count);
-	if (!count)
-		return 0;
-
-	count = be32_to_cpu(count);
-	for (i = 0; i < count; i++) {
-		file = malloc(sizeof(*file));
-		if (!file) {
-			printf("error: allocating resource\n");
-			goto err;
-		}
-		qemu_fwcfg_read_entry(FW_CFG_INVALID,
-				      sizeof(struct fw_cfg_file), &file->cfg);
-		file->addr = 0;
-		list_add_tail(&file->list, &fw_list);
-	}
-
-	return 0;
-
-err:
-	list_for_each(entry, &fw_list) {
-		file = list_entry(entry, struct fw_file, list);
-		free(file);
-	}
-
-	return -ENOMEM;
-}
-
-#ifdef CONFIG_QEMU_ACPI_TABLE
-static struct fw_file *qemu_fwcfg_find_file(const char *name)
-{
-	struct list_head *entry;
-	struct fw_file *file;
-
-	list_for_each(entry, &fw_list) {
-		file = list_entry(entry, struct fw_file, list);
-		if (!strcmp(file->cfg.name, name))
-			return file;
-	}
-
-	return NULL;
-}
-
-/*
- * This function allocates memory for ACPI tables
- *
- * @entry : BIOS linker command entry which tells where to allocate memory
- *          (either high memory or low memory)
- * @addr  : The address that should be used for low memory allcation. If the
- *          memory allocation request is 'ZONE_HIGH' then this parameter will
- *          be ignored.
- * @return: 0 on success, or negative value on failure
- */
-static int bios_linker_allocate(struct bios_linker_entry *entry, u32 *addr)
-{
-	uint32_t size, align;
-	struct fw_file *file;
-	unsigned long aligned_addr;
-
-	align = le32_to_cpu(entry->alloc.align);
-	/* align must be power of 2 */
-	if (align & (align - 1)) {
-		printf("error: wrong alignment %u\n", align);
-		return -EINVAL;
-	}
-
-	file = qemu_fwcfg_find_file(entry->alloc.file);
-	if (!file) {
-		printf("error: can't find file %s\n", entry->alloc.file);
-		return -ENOENT;
-	}
-
-	size = be32_to_cpu(file->cfg.size);
-
-	/*
-	 * ZONE_HIGH means we need to allocate from high memory, since
-	 * malloc space is already at the end of RAM, so we directly use it.
-	 * If allocation zone is ZONE_FSEG, then we use the 'addr' passed
-	 * in which is low memory
-	 */
-	if (entry->alloc.zone == BIOS_LINKER_LOADER_ALLOC_ZONE_HIGH) {
-		aligned_addr = (unsigned long)memalign(align, size);
-		if (!aligned_addr) {
-			printf("error: allocating resource\n");
-			return -ENOMEM;
-		}
-	} else if (entry->alloc.zone == BIOS_LINKER_LOADER_ALLOC_ZONE_FSEG) {
-		aligned_addr = ALIGN(*addr, align);
-	} else {
-		printf("error: invalid allocation zone\n");
-		return -EINVAL;
-	}
-
-	debug("bios_linker_allocate: allocate file %s, size %u, zone %d, align %u, addr 0x%lx\n",
-	      file->cfg.name, size, entry->alloc.zone, align, aligned_addr);
-
-	qemu_fwcfg_read_entry(be16_to_cpu(file->cfg.select),
-			      size, (void *)aligned_addr);
-	file->addr = aligned_addr;
-
-	/* adjust address for low memory allocation */
-	if (entry->alloc.zone == BIOS_LINKER_LOADER_ALLOC_ZONE_FSEG)
-		*addr = (aligned_addr + size);
-
-	return 0;
-}
-
-/*
- * This function patches ACPI tables previously loaded
- * by bios_linker_allocate()
- *
- * @entry : BIOS linker command entry which tells how to patch
- *          ACPI tables
- * @return: 0 on success, or negative value on failure
- */
-static int bios_linker_add_pointer(struct bios_linker_entry *entry)
-{
-	struct fw_file *dest, *src;
-	uint32_t offset = le32_to_cpu(entry->pointer.offset);
-	uint64_t pointer = 0;
-
-	dest = qemu_fwcfg_find_file(entry->pointer.dest_file);
-	if (!dest || !dest->addr)
-		return -ENOENT;
-	src = qemu_fwcfg_find_file(entry->pointer.src_file);
-	if (!src || !src->addr)
-		return -ENOENT;
-
-	debug("bios_linker_add_pointer: dest->addr 0x%lx, src->addr 0x%lx, offset 0x%x size %u, 0x%llx\n",
-	      dest->addr, src->addr, offset, entry->pointer.size, pointer);
-
-	memcpy(&pointer, (char *)dest->addr + offset, entry->pointer.size);
-	pointer	= le64_to_cpu(pointer);
-	pointer += (unsigned long)src->addr;
-	pointer	= cpu_to_le64(pointer);
-	memcpy((char *)dest->addr + offset, &pointer, entry->pointer.size);
-
-	return 0;
-}
-
-/*
- * This function updates checksum fields of ACPI tables previously loaded
- * by bios_linker_allocate()
- *
- * @entry : BIOS linker command entry which tells where to update ACPI table
- *          checksums
- * @return: 0 on success, or negative value on failure
- */
-static int bios_linker_add_checksum(struct bios_linker_entry *entry)
-{
-	struct fw_file *file;
-	uint8_t *data, cksum = 0;
-	uint8_t *cksum_start;
-
-	file = qemu_fwcfg_find_file(entry->cksum.file);
-	if (!file || !file->addr)
-		return -ENOENT;
-
-	data = (uint8_t *)(file->addr + le32_to_cpu(entry->cksum.offset));
-	cksum_start = (uint8_t *)(file->addr + le32_to_cpu(entry->cksum.start));
-	cksum = table_compute_checksum(cksum_start,
-				       le32_to_cpu(entry->cksum.length));
-	*data = cksum;
-
-	return 0;
-}
-
-unsigned install_e820_map(unsigned max_entries, struct e820entry *entries)
-{
-	entries[0].addr = 0;
-	entries[0].size = ISA_START_ADDRESS;
-	entries[0].type = E820_RAM;
-
-	entries[1].addr = ISA_START_ADDRESS;
-	entries[1].size = ISA_END_ADDRESS - ISA_START_ADDRESS;
-	entries[1].type = E820_RESERVED;
-
-	/*
-	 * since we use memalign(malloc) to allocate high memory for
-	 * storing ACPI tables, we need to reserve them in e820 tables,
-	 * otherwise kernel will reclaim them and data will be corrupted
-	 */
-	entries[2].addr = ISA_END_ADDRESS;
-	entries[2].size = gd->relocaddr - TOTAL_MALLOC_LEN - ISA_END_ADDRESS;
-	entries[2].type = E820_RAM;
-
-	/* for simplicity, reserve entire malloc space */
-	entries[3].addr = gd->relocaddr - TOTAL_MALLOC_LEN;
-	entries[3].size = TOTAL_MALLOC_LEN;
-	entries[3].type = E820_RESERVED;
-
-	entries[4].addr = gd->relocaddr;
-	entries[4].size = gd->ram_size - gd->relocaddr;
-	entries[4].type = E820_RESERVED;
-
-	entries[5].addr = CONFIG_PCIE_ECAM_BASE;
-	entries[5].size = CONFIG_PCIE_ECAM_SIZE;
-	entries[5].type = E820_RESERVED;
-
-	return 6;
-}
-
-/* This function loads and patches ACPI tables provided by QEMU */
-u32 write_acpi_tables(u32 addr)
-{
-	int i, ret = 0;
-	struct fw_file *file;
-	struct bios_linker_entry *table_loader;
-	struct bios_linker_entry *entry;
-	uint32_t size;
-	struct list_head *list;
-
-	/* make sure fw_list is loaded */
-	ret = qemu_fwcfg_read_firmware_list();
-	if (ret) {
-		printf("error: can't read firmware file list\n");
-		return addr;
-	}
-
-	file = qemu_fwcfg_find_file("etc/table-loader");
-	if (!file) {
-		printf("error: can't find etc/table-loader\n");
-		return addr;
-	}
-
-	size = be32_to_cpu(file->cfg.size);
-	if ((size % sizeof(*entry)) != 0) {
-		printf("error: table-loader maybe corrupted\n");
-		return addr;
-	}
-
-	table_loader = malloc(size);
-	if (!table_loader) {
-		printf("error: no memory for table-loader\n");
-		return addr;
-	}
-
-	qemu_fwcfg_read_entry(be16_to_cpu(file->cfg.select),
-			      size, table_loader);
-
-	for (i = 0; i < (size / sizeof(*entry)); i++) {
-		entry = table_loader + i;
-		switch (le32_to_cpu(entry->command)) {
-		case BIOS_LINKER_LOADER_COMMAND_ALLOCATE:
-			ret = bios_linker_allocate(entry, &addr);
-			if (ret)
-				goto out;
-			break;
-		case BIOS_LINKER_LOADER_COMMAND_ADD_POINTER:
-			ret = bios_linker_add_pointer(entry);
-			if (ret)
-				goto out;
-			break;
-		case BIOS_LINKER_LOADER_COMMAND_ADD_CHECKSUM:
-			ret = bios_linker_add_checksum(entry);
-			if (ret)
-				goto out;
-			break;
-		default:
-			break;
-		}
-	}
-
-out:
-	if (ret) {
-		list_for_each(list, &fw_list) {
-			file = list_entry(list, struct fw_file, list);
-			if (file->addr)
-				free((void *)file->addr);
-		}
-	}
-
-	free(table_loader);
-	return addr;
-}
-#endif
-
-static int qemu_fwcfg_list_firmware(void)
-{
-	int ret;
-	struct list_head *entry;
-	struct fw_file *file;
-
-	/* make sure fw_list is loaded */
-	ret = qemu_fwcfg_read_firmware_list();
-	if (ret)
-		return ret;
-
-	list_for_each(entry, &fw_list) {
-		file = list_entry(entry, struct fw_file, list);
-		printf("%-56s\n", file->cfg.name);
-	}
-
-	return 0;
-}
-
-void qemu_fwcfg_init(void)
-{
-	fwcfg_present = qemu_fwcfg_present();
-	if (fwcfg_present)
-		fwcfg_dma_present = qemu_fwcfg_dma_present();
-}
-
-static int qemu_fwcfg_do_list(cmd_tbl_t *cmdtp, int flag,
-		int argc, char * const argv[])
-{
-	if (qemu_fwcfg_list_firmware() < 0)
-		return CMD_RET_FAILURE;
-
-	return 0;
-}
-
-static int qemu_fwcfg_do_cpus(cmd_tbl_t *cmdtp, int flag,
-		int argc, char * const argv[])
-{
-	int ret = qemu_fwcfg_online_cpus();
-	if (ret < 0) {
-		printf("QEMU fw_cfg interface not found\n");
-		return CMD_RET_FAILURE;
-	}
-
-	printf("%d cpu(s) online\n", qemu_fwcfg_online_cpus());
-
-	return 0;
-}
-
-static int qemu_fwcfg_do_load(cmd_tbl_t *cmdtp, int flag,
-		int argc, char * const argv[])
-{
-	char *env;
-	void *load_addr;
-	void *initrd_addr;
-
-	env = getenv("loadaddr");
-	load_addr = env ?
-		(void *)simple_strtoul(env, NULL, 16) :
-		(void *)CONFIG_LOADADDR;
-
-	env = getenv("ramdiskaddr");
-	initrd_addr = env ?
-		(void *)simple_strtoul(env, NULL, 16) :
-		(void *)CONFIG_RAMDISK_ADDR;
-
-	if (argc == 2) {
-		load_addr = (void *)simple_strtoul(argv[0], NULL, 16);
-		initrd_addr = (void *)simple_strtoul(argv[1], NULL, 16);
-	} else if (argc == 1) {
-		load_addr = (void *)simple_strtoul(argv[0], NULL, 16);
-	}
-
-	return qemu_fwcfg_setup_kernel(load_addr, initrd_addr);
-}
-
-static cmd_tbl_t fwcfg_commands[] = {
-	U_BOOT_CMD_MKENT(list, 0, 1, qemu_fwcfg_do_list, "", ""),
-	U_BOOT_CMD_MKENT(cpus, 0, 1, qemu_fwcfg_do_cpus, "", ""),
-	U_BOOT_CMD_MKENT(load, 2, 1, qemu_fwcfg_do_load, "", ""),
-};
-
-static int do_qemu_fw(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
-{
-	int ret;
-	cmd_tbl_t *fwcfg_cmd;
-
-	if (!fwcfg_present) {
-		printf("QEMU fw_cfg interface not found\n");
-		return CMD_RET_USAGE;
-	}
-
-	fwcfg_cmd = find_cmd_tbl(argv[1], fwcfg_commands,
-				 ARRAY_SIZE(fwcfg_commands));
-	argc -= 2;
-	argv += 2;
-	if (!fwcfg_cmd || argc > fwcfg_cmd->maxargs)
-		return CMD_RET_USAGE;
-
-	ret = fwcfg_cmd->cmd(fwcfg_cmd, flag, argc, argv);
-
-	return cmd_process_error(fwcfg_cmd, ret);
-}
-
-U_BOOT_CMD(
-	qfw,	4,	1,	do_qemu_fw,
-	"QEMU firmware interface",
-	"<command>\n"
-	"    - list                             : print firmware(s) currently loaded\n"
-	"    - cpus                             : print online cpu number\n"
-	"    - load <kernel addr> <initrd addr> : load kernel and initrd (if any), and setup for zboot\n"
-)
diff --git a/arch/x86/cpu/qemu/qemu.c b/arch/x86/cpu/qemu/qemu.c
index 7ad0ee4..b41e4ec 100644
--- a/arch/x86/cpu/qemu/qemu.c
+++ b/arch/x86/cpu/qemu/qemu.c
@@ -6,12 +6,12 @@
 
 #include <common.h>
 #include <pci.h>
+#include <qemu_fw_cfg.h>
 #include <asm/irq.h>
 #include <asm/post.h>
 #include <asm/processor.h>
 #include <asm/arch/device.h>
 #include <asm/arch/qemu.h>
-#include <asm/fw_cfg.h>
 
 static bool i440fx;