x86: qemu: Move qfw command over to cmd and add Kconfig entry
- Move the command portion of arch/x86/cpu/qemu/fw_cfg.c into
cmd/qemu_fw_cfg.c
- Move arch/x86/include/asm/fw_cfg.h to include/qemu_fw_cfg.h
- Rename ACPI table portion to arch/x86/cpu/qemu/acpi_table.c
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
diff --git a/arch/x86/cpu/mp_init.c b/arch/x86/cpu/mp_init.c
index 2604a68..13bec7a 100644
--- a/arch/x86/cpu/mp_init.c
+++ b/arch/x86/cpu/mp_init.c
@@ -11,6 +11,7 @@
#include <dm.h>
#include <errno.h>
#include <malloc.h>
+#include <qemu_fw_cfg.h>
#include <asm/atomic.h>
#include <asm/cpu.h>
#include <asm/interrupt.h>
@@ -21,7 +22,6 @@
#include <asm/mtrr.h>
#include <asm/processor.h>
#include <asm/sipi.h>
-#include <asm/fw_cfg.h>
#include <dm/device-internal.h>
#include <dm/uclass-internal.h>
#include <dm/lists.h>
diff --git a/arch/x86/cpu/qemu/Makefile b/arch/x86/cpu/qemu/Makefile
index 6eeddf1..97b965c 100644
--- a/arch/x86/cpu/qemu/Makefile
+++ b/arch/x86/cpu/qemu/Makefile
@@ -7,4 +7,5 @@
ifndef CONFIG_EFI_STUB
obj-y += car.o dram.o
endif
-obj-y += cpu.o fw_cfg.o qemu.o
+obj-y += cpu.o qemu.o
+obj-$(CONFIG_QEMU_ACPI_TABLE) += acpi_table.o
diff --git a/arch/x86/cpu/qemu/acpi_table.c b/arch/x86/cpu/qemu/acpi_table.c
new file mode 100644
index 0000000..49381ac
--- /dev/null
+++ b/arch/x86/cpu/qemu/acpi_table.c
@@ -0,0 +1,243 @@
+/*
+ * (C) Copyright 2015 Miao Yan <yanmiaobest@gmail.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <command.h>
+#include <errno.h>
+#include <malloc.h>
+#include <qemu_fw_cfg.h>
+#include <asm/io.h>
+#include <asm/tables.h>
+#include <asm/e820.h>
+#include <linux/list.h>
+#include <memalign.h>
+
+/*
+ * This function allocates memory for ACPI tables
+ *
+ * @entry : BIOS linker command entry which tells where to allocate memory
+ * (either high memory or low memory)
+ * @addr : The address that should be used for low memory allcation. If the
+ * memory allocation request is 'ZONE_HIGH' then this parameter will
+ * be ignored.
+ * @return: 0 on success, or negative value on failure
+ */
+static int bios_linker_allocate(struct bios_linker_entry *entry, u32 *addr)
+{
+ uint32_t size, align;
+ struct fw_file *file;
+ unsigned long aligned_addr;
+
+ align = le32_to_cpu(entry->alloc.align);
+ /* align must be power of 2 */
+ if (align & (align - 1)) {
+ printf("error: wrong alignment %u\n", align);
+ return -EINVAL;
+ }
+
+ file = qemu_fwcfg_find_file(entry->alloc.file);
+ if (!file) {
+ printf("error: can't find file %s\n", entry->alloc.file);
+ return -ENOENT;
+ }
+
+ size = be32_to_cpu(file->cfg.size);
+
+ /*
+ * ZONE_HIGH means we need to allocate from high memory, since
+ * malloc space is already at the end of RAM, so we directly use it.
+ * If allocation zone is ZONE_FSEG, then we use the 'addr' passed
+ * in which is low memory
+ */
+ if (entry->alloc.zone == BIOS_LINKER_LOADER_ALLOC_ZONE_HIGH) {
+ aligned_addr = (unsigned long)memalign(align, size);
+ if (!aligned_addr) {
+ printf("error: allocating resource\n");
+ return -ENOMEM;
+ }
+ } else if (entry->alloc.zone == BIOS_LINKER_LOADER_ALLOC_ZONE_FSEG) {
+ aligned_addr = ALIGN(*addr, align);
+ } else {
+ printf("error: invalid allocation zone\n");
+ return -EINVAL;
+ }
+
+ debug("bios_linker_allocate: allocate file %s, size %u, zone %d, align %u, addr 0x%lx\n",
+ file->cfg.name, size, entry->alloc.zone, align, aligned_addr);
+
+ qemu_fwcfg_read_entry(be16_to_cpu(file->cfg.select),
+ size, (void *)aligned_addr);
+ file->addr = aligned_addr;
+
+ /* adjust address for low memory allocation */
+ if (entry->alloc.zone == BIOS_LINKER_LOADER_ALLOC_ZONE_FSEG)
+ *addr = (aligned_addr + size);
+
+ return 0;
+}
+
+/*
+ * This function patches ACPI tables previously loaded
+ * by bios_linker_allocate()
+ *
+ * @entry : BIOS linker command entry which tells how to patch
+ * ACPI tables
+ * @return: 0 on success, or negative value on failure
+ */
+static int bios_linker_add_pointer(struct bios_linker_entry *entry)
+{
+ struct fw_file *dest, *src;
+ uint32_t offset = le32_to_cpu(entry->pointer.offset);
+ uint64_t pointer = 0;
+
+ dest = qemu_fwcfg_find_file(entry->pointer.dest_file);
+ if (!dest || !dest->addr)
+ return -ENOENT;
+ src = qemu_fwcfg_find_file(entry->pointer.src_file);
+ if (!src || !src->addr)
+ return -ENOENT;
+
+ debug("bios_linker_add_pointer: dest->addr 0x%lx, src->addr 0x%lx, offset 0x%x size %u, 0x%llx\n",
+ dest->addr, src->addr, offset, entry->pointer.size, pointer);
+
+ memcpy(&pointer, (char *)dest->addr + offset, entry->pointer.size);
+ pointer = le64_to_cpu(pointer);
+ pointer += (unsigned long)src->addr;
+ pointer = cpu_to_le64(pointer);
+ memcpy((char *)dest->addr + offset, &pointer, entry->pointer.size);
+
+ return 0;
+}
+
+/*
+ * This function updates checksum fields of ACPI tables previously loaded
+ * by bios_linker_allocate()
+ *
+ * @entry : BIOS linker command entry which tells where to update ACPI table
+ * checksums
+ * @return: 0 on success, or negative value on failure
+ */
+static int bios_linker_add_checksum(struct bios_linker_entry *entry)
+{
+ struct fw_file *file;
+ uint8_t *data, cksum = 0;
+ uint8_t *cksum_start;
+
+ file = qemu_fwcfg_find_file(entry->cksum.file);
+ if (!file || !file->addr)
+ return -ENOENT;
+
+ data = (uint8_t *)(file->addr + le32_to_cpu(entry->cksum.offset));
+ cksum_start = (uint8_t *)(file->addr + le32_to_cpu(entry->cksum.start));
+ cksum = table_compute_checksum(cksum_start,
+ le32_to_cpu(entry->cksum.length));
+ *data = cksum;
+
+ return 0;
+}
+
+unsigned install_e820_map(unsigned max_entries, struct e820entry *entries)
+{
+ entries[0].addr = 0;
+ entries[0].size = ISA_START_ADDRESS;
+ entries[0].type = E820_RAM;
+
+ entries[1].addr = ISA_START_ADDRESS;
+ entries[1].size = ISA_END_ADDRESS - ISA_START_ADDRESS;
+ entries[1].type = E820_RESERVED;
+
+ /*
+ * since we use memalign(malloc) to allocate high memory for
+ * storing ACPI tables, we need to reserve them in e820 tables,
+ * otherwise kernel will reclaim them and data will be corrupted
+ */
+ entries[2].addr = ISA_END_ADDRESS;
+ entries[2].size = gd->relocaddr - TOTAL_MALLOC_LEN - ISA_END_ADDRESS;
+ entries[2].type = E820_RAM;
+
+ /* for simplicity, reserve entire malloc space */
+ entries[3].addr = gd->relocaddr - TOTAL_MALLOC_LEN;
+ entries[3].size = TOTAL_MALLOC_LEN;
+ entries[3].type = E820_RESERVED;
+
+ entries[4].addr = gd->relocaddr;
+ entries[4].size = gd->ram_size - gd->relocaddr;
+ entries[4].type = E820_RESERVED;
+
+ entries[5].addr = CONFIG_PCIE_ECAM_BASE;
+ entries[5].size = CONFIG_PCIE_ECAM_SIZE;
+ entries[5].type = E820_RESERVED;
+
+ return 6;
+}
+
+/* This function loads and patches ACPI tables provided by QEMU */
+u32 write_acpi_tables(u32 addr)
+{
+ int i, ret = 0;
+ struct fw_file *file;
+ struct bios_linker_entry *table_loader;
+ struct bios_linker_entry *entry;
+ uint32_t size;
+
+ /* make sure fw_list is loaded */
+ ret = qemu_fwcfg_read_firmware_list();
+ if (ret) {
+ printf("error: can't read firmware file list\n");
+ return addr;
+ }
+
+ file = qemu_fwcfg_find_file("etc/table-loader");
+ if (!file) {
+ printf("error: can't find etc/table-loader\n");
+ return addr;
+ }
+
+ size = be32_to_cpu(file->cfg.size);
+ if ((size % sizeof(*entry)) != 0) {
+ printf("error: table-loader maybe corrupted\n");
+ return addr;
+ }
+
+ table_loader = malloc(size);
+ if (!table_loader) {
+ printf("error: no memory for table-loader\n");
+ return addr;
+ }
+
+ qemu_fwcfg_read_entry(be16_to_cpu(file->cfg.select),
+ size, table_loader);
+
+ for (i = 0; i < (size / sizeof(*entry)); i++) {
+ entry = table_loader + i;
+ switch (le32_to_cpu(entry->command)) {
+ case BIOS_LINKER_LOADER_COMMAND_ALLOCATE:
+ ret = bios_linker_allocate(entry, &addr);
+ if (ret)
+ goto out;
+ break;
+ case BIOS_LINKER_LOADER_COMMAND_ADD_POINTER:
+ ret = bios_linker_add_pointer(entry);
+ if (ret)
+ goto out;
+ break;
+ case BIOS_LINKER_LOADER_COMMAND_ADD_CHECKSUM:
+ ret = bios_linker_add_checksum(entry);
+ if (ret)
+ goto out;
+ break;
+ default:
+ break;
+ }
+ }
+
+out:
+ if (ret)
+ qemu_fwcfg_free_files();
+
+ free(table_loader);
+ return addr;
+}
diff --git a/arch/x86/cpu/qemu/cpu.c b/arch/x86/cpu/qemu/cpu.c
index a1b70c6..4d2989a 100644
--- a/arch/x86/cpu/qemu/cpu.c
+++ b/arch/x86/cpu/qemu/cpu.c
@@ -8,8 +8,8 @@
#include <cpu.h>
#include <dm.h>
#include <errno.h>
+#include <qemu_fw_cfg.h>
#include <asm/cpu.h>
-#include <asm/fw_cfg.h>
DECLARE_GLOBAL_DATA_PTR;
diff --git a/arch/x86/cpu/qemu/fw_cfg.c b/arch/x86/cpu/qemu/fw_cfg.c
deleted file mode 100644
index 2e2794e..0000000
--- a/arch/x86/cpu/qemu/fw_cfg.c
+++ /dev/null
@@ -1,570 +0,0 @@
-/*
- * (C) Copyright 2015 Miao Yan <yanmiaobest@gmail.com>
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <common.h>
-#include <command.h>
-#include <errno.h>
-#include <malloc.h>
-#include <asm/io.h>
-#include <asm/fw_cfg.h>
-#include <asm/tables.h>
-#include <asm/e820.h>
-#include <linux/list.h>
-#include <memalign.h>
-
-static bool fwcfg_present;
-static bool fwcfg_dma_present;
-
-static LIST_HEAD(fw_list);
-
-/* Read configuration item using fw_cfg PIO interface */
-static void qemu_fwcfg_read_entry_pio(uint16_t entry,
- uint32_t size, void *address)
-{
- uint32_t i = 0;
- uint8_t *data = address;
-
- /*
- * writting FW_CFG_INVALID will cause read operation to resume at
- * last offset, otherwise read will start at offset 0
- */
- if (entry != FW_CFG_INVALID)
- outw(entry, FW_CONTROL_PORT);
- while (size--)
- data[i++] = inb(FW_DATA_PORT);
-}
-
-/* Read configuration item using fw_cfg DMA interface */
-static void qemu_fwcfg_read_entry_dma(uint16_t entry,
- uint32_t size, void *address)
-{
- struct fw_cfg_dma_access dma;
-
- dma.length = cpu_to_be32(size);
- dma.address = cpu_to_be64((uintptr_t)address);
- dma.control = cpu_to_be32(FW_CFG_DMA_READ);
-
- /*
- * writting FW_CFG_INVALID will cause read operation to resume at
- * last offset, otherwise read will start at offset 0
- */
- if (entry != FW_CFG_INVALID)
- dma.control |= cpu_to_be32(FW_CFG_DMA_SELECT | (entry << 16));
-
- barrier();
-
- debug("qemu_fwcfg_dma_read_entry: addr %p, length %u control 0x%x\n",
- address, size, be32_to_cpu(dma.control));
-
- outl(cpu_to_be32((uint32_t)&dma), FW_DMA_PORT_HIGH);
-
- while (be32_to_cpu(dma.control) & ~FW_CFG_DMA_ERROR)
- __asm__ __volatile__ ("pause");
-}
-
-static bool qemu_fwcfg_present(void)
-{
- uint32_t qemu;
-
- qemu_fwcfg_read_entry_pio(FW_CFG_SIGNATURE, 4, &qemu);
- return be32_to_cpu(qemu) == QEMU_FW_CFG_SIGNATURE;
-}
-
-static bool qemu_fwcfg_dma_present(void)
-{
- uint8_t dma_enabled;
-
- qemu_fwcfg_read_entry_pio(FW_CFG_ID, 1, &dma_enabled);
- if (dma_enabled & FW_CFG_DMA_ENABLED)
- return true;
-
- return false;
-}
-
-static void qemu_fwcfg_read_entry(uint16_t entry,
- uint32_t length, void *address)
-{
- if (fwcfg_dma_present)
- qemu_fwcfg_read_entry_dma(entry, length, address);
- else
- qemu_fwcfg_read_entry_pio(entry, length, address);
-}
-
-int qemu_fwcfg_online_cpus(void)
-{
- uint16_t nb_cpus;
-
- if (!fwcfg_present)
- return -ENODEV;
-
- qemu_fwcfg_read_entry(FW_CFG_NB_CPUS, 2, &nb_cpus);
-
- return le16_to_cpu(nb_cpus);
-}
-
-/*
- * This function prepares kernel for zboot. It loads kernel data
- * to 'load_addr', initrd to 'initrd_addr' and kernel command
- * line using qemu fw_cfg interface.
- */
-static int qemu_fwcfg_setup_kernel(void *load_addr, void *initrd_addr)
-{
- char *data_addr;
- uint32_t setup_size, kernel_size, cmdline_size, initrd_size;
-
- qemu_fwcfg_read_entry(FW_CFG_SETUP_SIZE, 4, &setup_size);
- qemu_fwcfg_read_entry(FW_CFG_KERNEL_SIZE, 4, &kernel_size);
-
- if (setup_size == 0 || kernel_size == 0) {
- printf("warning: no kernel available\n");
- return -1;
- }
-
- data_addr = load_addr;
- qemu_fwcfg_read_entry(FW_CFG_SETUP_DATA,
- le32_to_cpu(setup_size), data_addr);
- data_addr += le32_to_cpu(setup_size);
-
- qemu_fwcfg_read_entry(FW_CFG_KERNEL_DATA,
- le32_to_cpu(kernel_size), data_addr);
- data_addr += le32_to_cpu(kernel_size);
-
- data_addr = initrd_addr;
- qemu_fwcfg_read_entry(FW_CFG_INITRD_SIZE, 4, &initrd_size);
- if (initrd_size == 0) {
- printf("warning: no initrd available\n");
- } else {
- qemu_fwcfg_read_entry(FW_CFG_INITRD_DATA,
- le32_to_cpu(initrd_size), data_addr);
- data_addr += le32_to_cpu(initrd_size);
- }
-
- qemu_fwcfg_read_entry(FW_CFG_CMDLINE_SIZE, 4, &cmdline_size);
- if (cmdline_size) {
- qemu_fwcfg_read_entry(FW_CFG_CMDLINE_DATA,
- le32_to_cpu(cmdline_size), data_addr);
- /*
- * if kernel cmdline only contains '\0', (e.g. no -append
- * when invoking qemu), do not update bootargs
- */
- if (*data_addr != '\0') {
- if (setenv("bootargs", data_addr) < 0)
- printf("warning: unable to change bootargs\n");
- }
- }
-
- printf("loading kernel to address %p size %x", load_addr,
- le32_to_cpu(kernel_size));
- if (initrd_size)
- printf(" initrd %p size %x\n",
- initrd_addr,
- le32_to_cpu(initrd_size));
- else
- printf("\n");
-
- return 0;
-}
-
-static int qemu_fwcfg_read_firmware_list(void)
-{
- int i;
- uint32_t count;
- struct fw_file *file;
- struct list_head *entry;
-
- /* don't read it twice */
- if (!list_empty(&fw_list))
- return 0;
-
- qemu_fwcfg_read_entry(FW_CFG_FILE_DIR, 4, &count);
- if (!count)
- return 0;
-
- count = be32_to_cpu(count);
- for (i = 0; i < count; i++) {
- file = malloc(sizeof(*file));
- if (!file) {
- printf("error: allocating resource\n");
- goto err;
- }
- qemu_fwcfg_read_entry(FW_CFG_INVALID,
- sizeof(struct fw_cfg_file), &file->cfg);
- file->addr = 0;
- list_add_tail(&file->list, &fw_list);
- }
-
- return 0;
-
-err:
- list_for_each(entry, &fw_list) {
- file = list_entry(entry, struct fw_file, list);
- free(file);
- }
-
- return -ENOMEM;
-}
-
-#ifdef CONFIG_QEMU_ACPI_TABLE
-static struct fw_file *qemu_fwcfg_find_file(const char *name)
-{
- struct list_head *entry;
- struct fw_file *file;
-
- list_for_each(entry, &fw_list) {
- file = list_entry(entry, struct fw_file, list);
- if (!strcmp(file->cfg.name, name))
- return file;
- }
-
- return NULL;
-}
-
-/*
- * This function allocates memory for ACPI tables
- *
- * @entry : BIOS linker command entry which tells where to allocate memory
- * (either high memory or low memory)
- * @addr : The address that should be used for low memory allcation. If the
- * memory allocation request is 'ZONE_HIGH' then this parameter will
- * be ignored.
- * @return: 0 on success, or negative value on failure
- */
-static int bios_linker_allocate(struct bios_linker_entry *entry, u32 *addr)
-{
- uint32_t size, align;
- struct fw_file *file;
- unsigned long aligned_addr;
-
- align = le32_to_cpu(entry->alloc.align);
- /* align must be power of 2 */
- if (align & (align - 1)) {
- printf("error: wrong alignment %u\n", align);
- return -EINVAL;
- }
-
- file = qemu_fwcfg_find_file(entry->alloc.file);
- if (!file) {
- printf("error: can't find file %s\n", entry->alloc.file);
- return -ENOENT;
- }
-
- size = be32_to_cpu(file->cfg.size);
-
- /*
- * ZONE_HIGH means we need to allocate from high memory, since
- * malloc space is already at the end of RAM, so we directly use it.
- * If allocation zone is ZONE_FSEG, then we use the 'addr' passed
- * in which is low memory
- */
- if (entry->alloc.zone == BIOS_LINKER_LOADER_ALLOC_ZONE_HIGH) {
- aligned_addr = (unsigned long)memalign(align, size);
- if (!aligned_addr) {
- printf("error: allocating resource\n");
- return -ENOMEM;
- }
- } else if (entry->alloc.zone == BIOS_LINKER_LOADER_ALLOC_ZONE_FSEG) {
- aligned_addr = ALIGN(*addr, align);
- } else {
- printf("error: invalid allocation zone\n");
- return -EINVAL;
- }
-
- debug("bios_linker_allocate: allocate file %s, size %u, zone %d, align %u, addr 0x%lx\n",
- file->cfg.name, size, entry->alloc.zone, align, aligned_addr);
-
- qemu_fwcfg_read_entry(be16_to_cpu(file->cfg.select),
- size, (void *)aligned_addr);
- file->addr = aligned_addr;
-
- /* adjust address for low memory allocation */
- if (entry->alloc.zone == BIOS_LINKER_LOADER_ALLOC_ZONE_FSEG)
- *addr = (aligned_addr + size);
-
- return 0;
-}
-
-/*
- * This function patches ACPI tables previously loaded
- * by bios_linker_allocate()
- *
- * @entry : BIOS linker command entry which tells how to patch
- * ACPI tables
- * @return: 0 on success, or negative value on failure
- */
-static int bios_linker_add_pointer(struct bios_linker_entry *entry)
-{
- struct fw_file *dest, *src;
- uint32_t offset = le32_to_cpu(entry->pointer.offset);
- uint64_t pointer = 0;
-
- dest = qemu_fwcfg_find_file(entry->pointer.dest_file);
- if (!dest || !dest->addr)
- return -ENOENT;
- src = qemu_fwcfg_find_file(entry->pointer.src_file);
- if (!src || !src->addr)
- return -ENOENT;
-
- debug("bios_linker_add_pointer: dest->addr 0x%lx, src->addr 0x%lx, offset 0x%x size %u, 0x%llx\n",
- dest->addr, src->addr, offset, entry->pointer.size, pointer);
-
- memcpy(&pointer, (char *)dest->addr + offset, entry->pointer.size);
- pointer = le64_to_cpu(pointer);
- pointer += (unsigned long)src->addr;
- pointer = cpu_to_le64(pointer);
- memcpy((char *)dest->addr + offset, &pointer, entry->pointer.size);
-
- return 0;
-}
-
-/*
- * This function updates checksum fields of ACPI tables previously loaded
- * by bios_linker_allocate()
- *
- * @entry : BIOS linker command entry which tells where to update ACPI table
- * checksums
- * @return: 0 on success, or negative value on failure
- */
-static int bios_linker_add_checksum(struct bios_linker_entry *entry)
-{
- struct fw_file *file;
- uint8_t *data, cksum = 0;
- uint8_t *cksum_start;
-
- file = qemu_fwcfg_find_file(entry->cksum.file);
- if (!file || !file->addr)
- return -ENOENT;
-
- data = (uint8_t *)(file->addr + le32_to_cpu(entry->cksum.offset));
- cksum_start = (uint8_t *)(file->addr + le32_to_cpu(entry->cksum.start));
- cksum = table_compute_checksum(cksum_start,
- le32_to_cpu(entry->cksum.length));
- *data = cksum;
-
- return 0;
-}
-
-unsigned install_e820_map(unsigned max_entries, struct e820entry *entries)
-{
- entries[0].addr = 0;
- entries[0].size = ISA_START_ADDRESS;
- entries[0].type = E820_RAM;
-
- entries[1].addr = ISA_START_ADDRESS;
- entries[1].size = ISA_END_ADDRESS - ISA_START_ADDRESS;
- entries[1].type = E820_RESERVED;
-
- /*
- * since we use memalign(malloc) to allocate high memory for
- * storing ACPI tables, we need to reserve them in e820 tables,
- * otherwise kernel will reclaim them and data will be corrupted
- */
- entries[2].addr = ISA_END_ADDRESS;
- entries[2].size = gd->relocaddr - TOTAL_MALLOC_LEN - ISA_END_ADDRESS;
- entries[2].type = E820_RAM;
-
- /* for simplicity, reserve entire malloc space */
- entries[3].addr = gd->relocaddr - TOTAL_MALLOC_LEN;
- entries[3].size = TOTAL_MALLOC_LEN;
- entries[3].type = E820_RESERVED;
-
- entries[4].addr = gd->relocaddr;
- entries[4].size = gd->ram_size - gd->relocaddr;
- entries[4].type = E820_RESERVED;
-
- entries[5].addr = CONFIG_PCIE_ECAM_BASE;
- entries[5].size = CONFIG_PCIE_ECAM_SIZE;
- entries[5].type = E820_RESERVED;
-
- return 6;
-}
-
-/* This function loads and patches ACPI tables provided by QEMU */
-u32 write_acpi_tables(u32 addr)
-{
- int i, ret = 0;
- struct fw_file *file;
- struct bios_linker_entry *table_loader;
- struct bios_linker_entry *entry;
- uint32_t size;
- struct list_head *list;
-
- /* make sure fw_list is loaded */
- ret = qemu_fwcfg_read_firmware_list();
- if (ret) {
- printf("error: can't read firmware file list\n");
- return addr;
- }
-
- file = qemu_fwcfg_find_file("etc/table-loader");
- if (!file) {
- printf("error: can't find etc/table-loader\n");
- return addr;
- }
-
- size = be32_to_cpu(file->cfg.size);
- if ((size % sizeof(*entry)) != 0) {
- printf("error: table-loader maybe corrupted\n");
- return addr;
- }
-
- table_loader = malloc(size);
- if (!table_loader) {
- printf("error: no memory for table-loader\n");
- return addr;
- }
-
- qemu_fwcfg_read_entry(be16_to_cpu(file->cfg.select),
- size, table_loader);
-
- for (i = 0; i < (size / sizeof(*entry)); i++) {
- entry = table_loader + i;
- switch (le32_to_cpu(entry->command)) {
- case BIOS_LINKER_LOADER_COMMAND_ALLOCATE:
- ret = bios_linker_allocate(entry, &addr);
- if (ret)
- goto out;
- break;
- case BIOS_LINKER_LOADER_COMMAND_ADD_POINTER:
- ret = bios_linker_add_pointer(entry);
- if (ret)
- goto out;
- break;
- case BIOS_LINKER_LOADER_COMMAND_ADD_CHECKSUM:
- ret = bios_linker_add_checksum(entry);
- if (ret)
- goto out;
- break;
- default:
- break;
- }
- }
-
-out:
- if (ret) {
- list_for_each(list, &fw_list) {
- file = list_entry(list, struct fw_file, list);
- if (file->addr)
- free((void *)file->addr);
- }
- }
-
- free(table_loader);
- return addr;
-}
-#endif
-
-static int qemu_fwcfg_list_firmware(void)
-{
- int ret;
- struct list_head *entry;
- struct fw_file *file;
-
- /* make sure fw_list is loaded */
- ret = qemu_fwcfg_read_firmware_list();
- if (ret)
- return ret;
-
- list_for_each(entry, &fw_list) {
- file = list_entry(entry, struct fw_file, list);
- printf("%-56s\n", file->cfg.name);
- }
-
- return 0;
-}
-
-void qemu_fwcfg_init(void)
-{
- fwcfg_present = qemu_fwcfg_present();
- if (fwcfg_present)
- fwcfg_dma_present = qemu_fwcfg_dma_present();
-}
-
-static int qemu_fwcfg_do_list(cmd_tbl_t *cmdtp, int flag,
- int argc, char * const argv[])
-{
- if (qemu_fwcfg_list_firmware() < 0)
- return CMD_RET_FAILURE;
-
- return 0;
-}
-
-static int qemu_fwcfg_do_cpus(cmd_tbl_t *cmdtp, int flag,
- int argc, char * const argv[])
-{
- int ret = qemu_fwcfg_online_cpus();
- if (ret < 0) {
- printf("QEMU fw_cfg interface not found\n");
- return CMD_RET_FAILURE;
- }
-
- printf("%d cpu(s) online\n", qemu_fwcfg_online_cpus());
-
- return 0;
-}
-
-static int qemu_fwcfg_do_load(cmd_tbl_t *cmdtp, int flag,
- int argc, char * const argv[])
-{
- char *env;
- void *load_addr;
- void *initrd_addr;
-
- env = getenv("loadaddr");
- load_addr = env ?
- (void *)simple_strtoul(env, NULL, 16) :
- (void *)CONFIG_LOADADDR;
-
- env = getenv("ramdiskaddr");
- initrd_addr = env ?
- (void *)simple_strtoul(env, NULL, 16) :
- (void *)CONFIG_RAMDISK_ADDR;
-
- if (argc == 2) {
- load_addr = (void *)simple_strtoul(argv[0], NULL, 16);
- initrd_addr = (void *)simple_strtoul(argv[1], NULL, 16);
- } else if (argc == 1) {
- load_addr = (void *)simple_strtoul(argv[0], NULL, 16);
- }
-
- return qemu_fwcfg_setup_kernel(load_addr, initrd_addr);
-}
-
-static cmd_tbl_t fwcfg_commands[] = {
- U_BOOT_CMD_MKENT(list, 0, 1, qemu_fwcfg_do_list, "", ""),
- U_BOOT_CMD_MKENT(cpus, 0, 1, qemu_fwcfg_do_cpus, "", ""),
- U_BOOT_CMD_MKENT(load, 2, 1, qemu_fwcfg_do_load, "", ""),
-};
-
-static int do_qemu_fw(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
-{
- int ret;
- cmd_tbl_t *fwcfg_cmd;
-
- if (!fwcfg_present) {
- printf("QEMU fw_cfg interface not found\n");
- return CMD_RET_USAGE;
- }
-
- fwcfg_cmd = find_cmd_tbl(argv[1], fwcfg_commands,
- ARRAY_SIZE(fwcfg_commands));
- argc -= 2;
- argv += 2;
- if (!fwcfg_cmd || argc > fwcfg_cmd->maxargs)
- return CMD_RET_USAGE;
-
- ret = fwcfg_cmd->cmd(fwcfg_cmd, flag, argc, argv);
-
- return cmd_process_error(fwcfg_cmd, ret);
-}
-
-U_BOOT_CMD(
- qfw, 4, 1, do_qemu_fw,
- "QEMU firmware interface",
- "<command>\n"
- " - list : print firmware(s) currently loaded\n"
- " - cpus : print online cpu number\n"
- " - load <kernel addr> <initrd addr> : load kernel and initrd (if any), and setup for zboot\n"
-)
diff --git a/arch/x86/cpu/qemu/qemu.c b/arch/x86/cpu/qemu/qemu.c
index 7ad0ee4..b41e4ec 100644
--- a/arch/x86/cpu/qemu/qemu.c
+++ b/arch/x86/cpu/qemu/qemu.c
@@ -6,12 +6,12 @@
#include <common.h>
#include <pci.h>
+#include <qemu_fw_cfg.h>
#include <asm/irq.h>
#include <asm/post.h>
#include <asm/processor.h>
#include <asm/arch/device.h>
#include <asm/arch/qemu.h>
-#include <asm/fw_cfg.h>
static bool i440fx;
diff --git a/arch/x86/lib/acpi_table.c b/arch/x86/lib/acpi_table.c
index 989cf7d..be7b824 100644
--- a/arch/x86/lib/acpi_table.c
+++ b/arch/x86/lib/acpi_table.c
@@ -303,7 +303,7 @@
/*
* QEMU's version of write_acpi_tables is defined in
- * arch/x86/cpu/qemu/fw_cfg.c
+ * arch/x86/cpu/qemu/acpi_table.c
*/
u32 write_acpi_tables(u32 start)
{
diff --git a/cmd/Kconfig b/cmd/Kconfig
index 9336752..c0fffe3 100644
--- a/cmd/Kconfig
+++ b/cmd/Kconfig
@@ -593,6 +593,13 @@
sound init - set up sound system
sound play - play a sound
+config CMD_QEMU_FW_CFG
+ bool "qfw"
+ depends on X86
+ help
+ This provides access to the QEMU firmware interface. The main
+ feature is to allow easy loading of files passed to qemu-system
+ via -kernel / -initrd
endmenu
config CMD_BOOTSTAGE
diff --git a/cmd/Makefile b/cmd/Makefile
index e3e0c74..d4432c8 100644
--- a/cmd/Makefile
+++ b/cmd/Makefile
@@ -105,6 +105,7 @@
obj-y += pcmcia.o
obj-$(CONFIG_CMD_PORTIO) += portio.o
obj-$(CONFIG_CMD_PXE) += pxe.o
+obj-$(CONFIG_CMD_QEMU_FW_CFG) += qemu_fw_cfg.o
obj-$(CONFIG_CMD_READ) += read.o
obj-$(CONFIG_CMD_REGINFO) += reginfo.o
obj-$(CONFIG_CMD_REISER) += reiser.o
diff --git a/cmd/qemu_fw_cfg.c b/cmd/qemu_fw_cfg.c
new file mode 100644
index 0000000..48ae476
--- /dev/null
+++ b/cmd/qemu_fw_cfg.c
@@ -0,0 +1,343 @@
+/*
+ * (C) Copyright 2015 Miao Yan <yanmiaobest@gmail.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <command.h>
+#include <errno.h>
+#include <malloc.h>
+#include <qemu_fw_cfg.h>
+#include <asm/io.h>
+#include <linux/list.h>
+
+static bool fwcfg_present;
+static bool fwcfg_dma_present;
+
+static LIST_HEAD(fw_list);
+
+/* Read configuration item using fw_cfg PIO interface */
+static void qemu_fwcfg_read_entry_pio(uint16_t entry,
+ uint32_t size, void *address)
+{
+ uint32_t i = 0;
+ uint8_t *data = address;
+
+ /*
+ * writting FW_CFG_INVALID will cause read operation to resume at
+ * last offset, otherwise read will start at offset 0
+ */
+ if (entry != FW_CFG_INVALID)
+ outw(entry, FW_CONTROL_PORT);
+ while (size--)
+ data[i++] = inb(FW_DATA_PORT);
+}
+
+/* Read configuration item using fw_cfg DMA interface */
+static void qemu_fwcfg_read_entry_dma(uint16_t entry,
+ uint32_t size, void *address)
+{
+ struct fw_cfg_dma_access dma;
+
+ dma.length = cpu_to_be32(size);
+ dma.address = cpu_to_be64((uintptr_t)address);
+ dma.control = cpu_to_be32(FW_CFG_DMA_READ);
+
+ /*
+ * writting FW_CFG_INVALID will cause read operation to resume at
+ * last offset, otherwise read will start at offset 0
+ */
+ if (entry != FW_CFG_INVALID)
+ dma.control |= cpu_to_be32(FW_CFG_DMA_SELECT | (entry << 16));
+
+ barrier();
+
+ debug("qemu_fwcfg_dma_read_entry: addr %p, length %u control 0x%x\n",
+ address, size, be32_to_cpu(dma.control));
+
+ outl(cpu_to_be32((uint32_t)&dma), FW_DMA_PORT_HIGH);
+
+ while (be32_to_cpu(dma.control) & ~FW_CFG_DMA_ERROR)
+ __asm__ __volatile__ ("pause");
+}
+
+static bool qemu_fwcfg_present(void)
+{
+ uint32_t qemu;
+
+ qemu_fwcfg_read_entry_pio(FW_CFG_SIGNATURE, 4, &qemu);
+ return be32_to_cpu(qemu) == QEMU_FW_CFG_SIGNATURE;
+}
+
+static bool qemu_fwcfg_dma_present(void)
+{
+ uint8_t dma_enabled;
+
+ qemu_fwcfg_read_entry_pio(FW_CFG_ID, 1, &dma_enabled);
+ if (dma_enabled & FW_CFG_DMA_ENABLED)
+ return true;
+
+ return false;
+}
+
+void qemu_fwcfg_read_entry(uint16_t entry, uint32_t length, void *address)
+{
+ if (fwcfg_dma_present)
+ qemu_fwcfg_read_entry_dma(entry, length, address);
+ else
+ qemu_fwcfg_read_entry_pio(entry, length, address);
+}
+
+int qemu_fwcfg_online_cpus(void)
+{
+ uint16_t nb_cpus;
+
+ if (!fwcfg_present)
+ return -ENODEV;
+
+ qemu_fwcfg_read_entry(FW_CFG_NB_CPUS, 2, &nb_cpus);
+
+ return le16_to_cpu(nb_cpus);
+}
+
+/*
+ * This function prepares kernel for zboot. It loads kernel data
+ * to 'load_addr', initrd to 'initrd_addr' and kernel command
+ * line using qemu fw_cfg interface.
+ */
+static int qemu_fwcfg_setup_kernel(void *load_addr, void *initrd_addr)
+{
+ char *data_addr;
+ uint32_t setup_size, kernel_size, cmdline_size, initrd_size;
+
+ qemu_fwcfg_read_entry(FW_CFG_SETUP_SIZE, 4, &setup_size);
+ qemu_fwcfg_read_entry(FW_CFG_KERNEL_SIZE, 4, &kernel_size);
+
+ if (setup_size == 0 || kernel_size == 0) {
+ printf("warning: no kernel available\n");
+ return -1;
+ }
+
+ data_addr = load_addr;
+ qemu_fwcfg_read_entry(FW_CFG_SETUP_DATA,
+ le32_to_cpu(setup_size), data_addr);
+ data_addr += le32_to_cpu(setup_size);
+
+ qemu_fwcfg_read_entry(FW_CFG_KERNEL_DATA,
+ le32_to_cpu(kernel_size), data_addr);
+ data_addr += le32_to_cpu(kernel_size);
+
+ data_addr = initrd_addr;
+ qemu_fwcfg_read_entry(FW_CFG_INITRD_SIZE, 4, &initrd_size);
+ if (initrd_size == 0) {
+ printf("warning: no initrd available\n");
+ } else {
+ qemu_fwcfg_read_entry(FW_CFG_INITRD_DATA,
+ le32_to_cpu(initrd_size), data_addr);
+ data_addr += le32_to_cpu(initrd_size);
+ }
+
+ qemu_fwcfg_read_entry(FW_CFG_CMDLINE_SIZE, 4, &cmdline_size);
+ if (cmdline_size) {
+ qemu_fwcfg_read_entry(FW_CFG_CMDLINE_DATA,
+ le32_to_cpu(cmdline_size), data_addr);
+ /*
+ * if kernel cmdline only contains '\0', (e.g. no -append
+ * when invoking qemu), do not update bootargs
+ */
+ if (*data_addr != '\0') {
+ if (setenv("bootargs", data_addr) < 0)
+ printf("warning: unable to change bootargs\n");
+ }
+ }
+
+ printf("loading kernel to address %p size %x", load_addr,
+ le32_to_cpu(kernel_size));
+ if (initrd_size)
+ printf(" initrd %p size %x\n",
+ initrd_addr,
+ le32_to_cpu(initrd_size));
+ else
+ printf("\n");
+
+ return 0;
+}
+
+int qemu_fwcfg_read_firmware_list(void)
+{
+ int i;
+ uint32_t count;
+ struct fw_file *file;
+ struct list_head *entry;
+
+ /* don't read it twice */
+ if (!list_empty(&fw_list))
+ return 0;
+
+ qemu_fwcfg_read_entry(FW_CFG_FILE_DIR, 4, &count);
+ if (!count)
+ return 0;
+
+ count = be32_to_cpu(count);
+ for (i = 0; i < count; i++) {
+ file = malloc(sizeof(*file));
+ if (!file) {
+ printf("error: allocating resource\n");
+ goto err;
+ }
+ qemu_fwcfg_read_entry(FW_CFG_INVALID,
+ sizeof(struct fw_cfg_file), &file->cfg);
+ file->addr = 0;
+ list_add_tail(&file->list, &fw_list);
+ }
+
+ return 0;
+
+err:
+ list_for_each(entry, &fw_list) {
+ file = list_entry(entry, struct fw_file, list);
+ free(file);
+ }
+
+ return -ENOMEM;
+}
+
+struct fw_file *qemu_fwcfg_find_file(const char *name)
+{
+ struct list_head *entry;
+ struct fw_file *file;
+
+ list_for_each(entry, &fw_list) {
+ file = list_entry(entry, struct fw_file, list);
+ if (!strcmp(file->cfg.name, name))
+ return file;
+ }
+
+ return NULL;
+}
+
+void qemu_fwcfg_free_files(void)
+{
+ struct fw_file *file;
+ struct list_head *list;
+
+ list_for_each(list, &fw_list) {
+ file = list_entry(list, struct fw_file, list);
+ if (file->addr)
+ free((void *)file->addr);
+ }
+}
+
+static int qemu_fwcfg_list_firmware(void)
+{
+ int ret;
+ struct list_head *entry;
+ struct fw_file *file;
+
+ /* make sure fw_list is loaded */
+ ret = qemu_fwcfg_read_firmware_list();
+ if (ret)
+ return ret;
+
+ list_for_each(entry, &fw_list) {
+ file = list_entry(entry, struct fw_file, list);
+ printf("%-56s\n", file->cfg.name);
+ }
+
+ return 0;
+}
+
+void qemu_fwcfg_init(void)
+{
+ fwcfg_present = qemu_fwcfg_present();
+ if (fwcfg_present)
+ fwcfg_dma_present = qemu_fwcfg_dma_present();
+}
+
+static int qemu_fwcfg_do_list(cmd_tbl_t *cmdtp, int flag,
+ int argc, char * const argv[])
+{
+ if (qemu_fwcfg_list_firmware() < 0)
+ return CMD_RET_FAILURE;
+
+ return 0;
+}
+
+static int qemu_fwcfg_do_cpus(cmd_tbl_t *cmdtp, int flag,
+ int argc, char * const argv[])
+{
+ int ret = qemu_fwcfg_online_cpus();
+ if (ret < 0) {
+ printf("QEMU fw_cfg interface not found\n");
+ return CMD_RET_FAILURE;
+ }
+
+ printf("%d cpu(s) online\n", qemu_fwcfg_online_cpus());
+
+ return 0;
+}
+
+static int qemu_fwcfg_do_load(cmd_tbl_t *cmdtp, int flag,
+ int argc, char * const argv[])
+{
+ char *env;
+ void *load_addr;
+ void *initrd_addr;
+
+ env = getenv("loadaddr");
+ load_addr = env ?
+ (void *)simple_strtoul(env, NULL, 16) :
+ (void *)CONFIG_LOADADDR;
+
+ env = getenv("ramdiskaddr");
+ initrd_addr = env ?
+ (void *)simple_strtoul(env, NULL, 16) :
+ (void *)CONFIG_RAMDISK_ADDR;
+
+ if (argc == 2) {
+ load_addr = (void *)simple_strtoul(argv[0], NULL, 16);
+ initrd_addr = (void *)simple_strtoul(argv[1], NULL, 16);
+ } else if (argc == 1) {
+ load_addr = (void *)simple_strtoul(argv[0], NULL, 16);
+ }
+
+ return qemu_fwcfg_setup_kernel(load_addr, initrd_addr);
+}
+
+static cmd_tbl_t fwcfg_commands[] = {
+ U_BOOT_CMD_MKENT(list, 0, 1, qemu_fwcfg_do_list, "", ""),
+ U_BOOT_CMD_MKENT(cpus, 0, 1, qemu_fwcfg_do_cpus, "", ""),
+ U_BOOT_CMD_MKENT(load, 2, 1, qemu_fwcfg_do_load, "", ""),
+};
+
+static int do_qemu_fw(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
+{
+ int ret;
+ cmd_tbl_t *fwcfg_cmd;
+
+ if (!fwcfg_present) {
+ printf("QEMU fw_cfg interface not found\n");
+ return CMD_RET_USAGE;
+ }
+
+ fwcfg_cmd = find_cmd_tbl(argv[1], fwcfg_commands,
+ ARRAY_SIZE(fwcfg_commands));
+ argc -= 2;
+ argv += 2;
+ if (!fwcfg_cmd || argc > fwcfg_cmd->maxargs)
+ return CMD_RET_USAGE;
+
+ ret = fwcfg_cmd->cmd(fwcfg_cmd, flag, argc, argv);
+
+ return cmd_process_error(fwcfg_cmd, ret);
+}
+
+U_BOOT_CMD(
+ qfw, 4, 1, do_qemu_fw,
+ "QEMU firmware interface",
+ "<command>\n"
+ " - list : print firmware(s) currently loaded\n"
+ " - cpus : print online cpu number\n"
+ " - load <kernel addr> <initrd addr> : load kernel and initrd (if any), and setup for zboot\n"
+)
diff --git a/configs/qemu-x86_defconfig b/configs/qemu-x86_defconfig
index 53b1ff6..a813e5b 100644
--- a/configs/qemu-x86_defconfig
+++ b/configs/qemu-x86_defconfig
@@ -20,6 +20,7 @@
# CONFIG_CMD_NFS is not set
CONFIG_CMD_PING=y
CONFIG_CMD_TIME=y
+CONFIG_CMD_QEMU_FW_CFG=y
CONFIG_CMD_BOOTSTAGE=y
CONFIG_CMD_EXT2=y
CONFIG_CMD_EXT4=y
diff --git a/arch/x86/include/asm/fw_cfg.h b/include/qemu_fw_cfg.h
similarity index 94%
rename from arch/x86/include/asm/fw_cfg.h
rename to include/qemu_fw_cfg.h
index e9450c6..e21f150 100644
--- a/arch/x86/include/asm/fw_cfg.h
+++ b/include/qemu_fw_cfg.h
@@ -147,6 +147,11 @@
*/
void qemu_fwcfg_init(void);
+void qemu_fwcfg_read_entry(uint16_t entry, uint32_t length, void *address);
+int qemu_fwcfg_read_firmware_list(void);
+struct fw_file *qemu_fwcfg_find_file(const char *name);
+void qemu_fwcfg_free_files(void);
+
/**
* Get system cpu number
*