config AHCI
	bool "Support SATA controllers with driver model"
	depends on DM
	help
	  This enables a uclass for disk controllers in U-Boot. Various driver
	  types can use this, such as AHCI/SATA. It does not provide any standard
	  operations at present. The block device interface has not been converted
	  to driver model.

config SATA
	bool "Support SATA controllers"
	select HAVE_BLOCK_DEVICE
	help
	  This enables support for SATA (Serial Advanced Technology
	  Attachment), a serial bus standard for connecting to hard drives and
	  other storage devices.

	  SATA replaces PATA (originally just ATA), which stands for Parallel AT
	  Attachment, where AT refers to an IBM AT (Advanced Technology)
	  computer released in 1984.

	  See also CMD_SATA which provides command-line support.

config LIBATA
	bool
	help
	  Select this to build and link the libata helper functions.

config SCSI_AHCI
	bool "Enable SCSI interface to SATA devices"
	select LIBATA
	help
	  Enable this to allow interfacing SATA devices via the SCSI layer.

menu "SATA/SCSI device support"

config AHCI_PCI
	bool "Support for PCI-based AHCI controller"
	depends on DM_SCSI
	help
	  Enables support for the PCI-based AHCI controller.

config SATA_CEVA
	bool "Ceva Sata controller"
	depends on AHCI
	depends on DM_SCSI
	help
	  This option enables Ceva Sata controller hard IP available on Xilinx
	  ZynqMP. Support up to 2 external devices. Complient with SATA 3.1 and
	  AHCI 1.3 specifications with hot-plug detect feature.


config DWC_AHCI
	bool "Enable Synopsys DWC AHCI driver support"
	select SCSI_AHCI
	select PHY
	depends on DM_SCSI
	help
	  Enable this driver to support Sata devices through
	  Synopsys DWC AHCI module.

config DWC_AHSATA
	bool "Enable DWC AHSATA driver support"
	select LIBATA
	depends on BLK
	help
	  Enable this driver to support the DWC AHSATA SATA controller found
	  in i.MX5 and i.MX6 SoCs.

config DWC_AHSATA_AHCI
	bool "Enable DWC AHSATA AHCI driver support"
	depends on DWC_AHSATA
	depends on AHCI
	default y
	help
	  Enable this option unless you need your private ahci implementation

config FSL_SATA
	bool "Enable Freescale SATA controller driver support"
	select LIBATA
	select AHCI if BLK
	help
	  Enable this driver to support the SATA controller found in
	  some Freescale PowerPC SoCs.

config SATA_MV
	bool "Enable Marvell SATA controller driver support"
	select AHCI
	select LIBATA
	depends on BLK
	help
	  Enable this driver to support the SATA controller found in
	  some Marvell SoCs.

config SATA_SIL
	bool "Enable Silicon Image SIL3131 / SIL3132 / SIL3124 SATA driver support"
	select LIBATA
	select AHCI if BLK
	help
	  Enable this driver to support the SIL3131, SIL3132 and SIL3124
	  SATA controllers.

config SATA_SIL3114
	bool "Enable Silicon Image SIL3114 SATA driver support"
	select LIBATA
	help
	  Enable this driver to support the SIL3114 SATA controllers.

config SUNXI_AHCI
	bool "Enable Allwinner SATA driver support"
	depends on AHCI
	default y if ARCH_SUNXI
	help
	  Enable this driver to support the SATA controllers found in the
	  Allwinner A10, A20 and R40 SoCs.

config AHCI_MVEBU
	bool "Marvell EBU AHCI SATA support"
	depends on ARCH_MVEBU
	depends on AHCI
	select SCSI_AHCI
	select DM_SCSI
	help
	  This option enables support for the Marvell EBU SoC's
	  onboard AHCI SATA.

	  If unsure, say N.

config MTK_AHCI
	bool "Enable Mediatek AHCI driver support"
	depends on AHCI
	help
	  Enable this driver to support Sata devices through
	  Mediatek AHCI controller (e.g. MT7622).

endmenu