| // SPDX-License-Identifier: GPL-2.0+ |
| /* |
| * Copyright (C) 2013 Google, Inc |
| * |
| * Note: Test coverage does not include 10-bit addressing |
| */ |
| |
| #include <dm.h> |
| #include <fdtdec.h> |
| #include <i2c.h> |
| #include <asm/state.h> |
| #include <asm/test.h> |
| #include <dm/device-internal.h> |
| #include <dm/test.h> |
| #include <dm/uclass-internal.h> |
| #include <dm/util.h> |
| #include <hexdump.h> |
| #include <test/test.h> |
| #include <test/ut.h> |
| |
| static const int busnum; |
| static const int chip = 0x2c; |
| |
| /* Test that we can find buses and chips */ |
| static int dm_test_i2c_find(struct unit_test_state *uts) |
| { |
| struct udevice *bus, *dev; |
| const int no_chip = 0x10; |
| |
| /* |
| * The post_bind() method will bind devices to chip selects. Check |
| * this then remove the emulation and the slave device. |
| */ |
| ut_assertok(uclass_get_device_by_seq(UCLASS_I2C, busnum, &bus)); |
| ut_assertok(dm_i2c_probe(bus, chip, 0, &dev)); |
| ut_asserteq(-ENOENT, dm_i2c_probe(bus, no_chip, 0, &dev)); |
| ut_asserteq(-ENODEV, uclass_get_device_by_seq(UCLASS_I2C, 1, &bus)); |
| |
| return 0; |
| } |
| DM_TEST(dm_test_i2c_find, UT_TESTF_SCAN_PDATA | UT_TESTF_SCAN_FDT); |
| |
| static int dm_test_i2c_read_write(struct unit_test_state *uts) |
| { |
| struct udevice *bus, *dev; |
| uint8_t buf[5]; |
| |
| ut_assertok(uclass_get_device_by_seq(UCLASS_I2C, busnum, &bus)); |
| ut_assertok(i2c_get_chip(bus, chip, 1, &dev)); |
| ut_assertok(dm_i2c_read(dev, 0, buf, 5)); |
| ut_asserteq_mem(buf, "\0\0\0\0\0", sizeof(buf)); |
| ut_assertok(dm_i2c_write(dev, 2, (uint8_t *)"AB", 2)); |
| ut_assertok(dm_i2c_read(dev, 0, buf, 5)); |
| ut_asserteq_mem(buf, "\0\0AB\0", sizeof(buf)); |
| |
| return 0; |
| } |
| DM_TEST(dm_test_i2c_read_write, UT_TESTF_SCAN_PDATA | UT_TESTF_SCAN_FDT); |
| |
| static int dm_test_i2c_speed(struct unit_test_state *uts) |
| { |
| struct udevice *bus, *dev; |
| uint8_t buf[5]; |
| |
| ut_assertok(uclass_get_device_by_seq(UCLASS_I2C, busnum, &bus)); |
| |
| /* Use test mode so we create the required errors for invalid speeds */ |
| sandbox_i2c_set_test_mode(bus, true); |
| ut_assertok(i2c_get_chip(bus, chip, 1, &dev)); |
| ut_assertok(dm_i2c_set_bus_speed(bus, 100000)); |
| ut_assertok(dm_i2c_read(dev, 0, buf, 5)); |
| ut_assertok(dm_i2c_set_bus_speed(bus, 400000)); |
| ut_asserteq(400000, dm_i2c_get_bus_speed(bus)); |
| ut_assertok(dm_i2c_read(dev, 0, buf, 5)); |
| ut_asserteq(-EINVAL, dm_i2c_write(dev, 0, buf, 5)); |
| sandbox_i2c_set_test_mode(bus, false); |
| |
| return 0; |
| } |
| DM_TEST(dm_test_i2c_speed, UT_TESTF_SCAN_PDATA | UT_TESTF_SCAN_FDT); |
| |
| static int dm_test_i2c_offset_len(struct unit_test_state *uts) |
| { |
| struct udevice *bus, *dev; |
| uint8_t buf[5]; |
| |
| ut_assertok(uclass_get_device_by_seq(UCLASS_I2C, busnum, &bus)); |
| ut_assertok(i2c_get_chip(bus, chip, 1, &dev)); |
| ut_assertok(i2c_set_chip_offset_len(dev, 1)); |
| ut_assertok(dm_i2c_read(dev, 0, buf, 5)); |
| |
| /* This is not supported by the uclass */ |
| ut_asserteq(-EINVAL, i2c_set_chip_offset_len(dev, 5)); |
| |
| return 0; |
| } |
| DM_TEST(dm_test_i2c_offset_len, UT_TESTF_SCAN_PDATA | UT_TESTF_SCAN_FDT); |
| |
| static int dm_test_i2c_probe_empty(struct unit_test_state *uts) |
| { |
| struct udevice *bus, *dev; |
| |
| ut_assertok(uclass_get_device_by_seq(UCLASS_I2C, busnum, &bus)); |
| |
| /* Use test mode so that this chip address will always probe */ |
| sandbox_i2c_set_test_mode(bus, true); |
| ut_assertok(dm_i2c_probe(bus, SANDBOX_I2C_TEST_ADDR, 0, &dev)); |
| sandbox_i2c_set_test_mode(bus, false); |
| |
| return 0; |
| } |
| DM_TEST(dm_test_i2c_probe_empty, UT_TESTF_SCAN_PDATA | UT_TESTF_SCAN_FDT); |
| |
| static int dm_test_i2c_bytewise(struct unit_test_state *uts) |
| { |
| struct udevice *bus, *dev; |
| struct udevice *eeprom; |
| uint8_t buf[5]; |
| |
| ut_assertok(uclass_get_device_by_seq(UCLASS_I2C, busnum, &bus)); |
| ut_assertok(i2c_get_chip(bus, chip, 1, &dev)); |
| ut_assertok(dm_i2c_read(dev, 0, buf, 5)); |
| ut_asserteq_mem(buf, "\0\0\0\0\0", sizeof(buf)); |
| |
| /* Tell the EEPROM to only read/write one register at a time */ |
| ut_assertok(uclass_first_device_err(UCLASS_I2C_EMUL, &eeprom)); |
| ut_assertnonnull(eeprom); |
| sandbox_i2c_eeprom_set_test_mode(eeprom, SIE_TEST_MODE_SINGLE_BYTE); |
| |
| /* Now we only get the first byte - the rest will be 0xff */ |
| ut_assertok(dm_i2c_read(dev, 0, buf, 5)); |
| ut_asserteq_mem(buf, "\0\xff\xff\xff\xff", sizeof(buf)); |
| |
| /* If we do a separate transaction for each byte, it works */ |
| ut_assertok(i2c_set_chip_flags(dev, DM_I2C_CHIP_RD_ADDRESS)); |
| ut_assertok(dm_i2c_read(dev, 0, buf, 5)); |
| ut_asserteq_mem(buf, "\0\0\0\0\0", sizeof(buf)); |
| |
| /* This will only write A */ |
| ut_assertok(i2c_set_chip_flags(dev, 0)); |
| ut_assertok(dm_i2c_write(dev, 2, (uint8_t *)"AB", 2)); |
| ut_assertok(dm_i2c_read(dev, 0, buf, 5)); |
| ut_asserteq_mem(buf, "\0\xff\xff\xff\xff", sizeof(buf)); |
| |
| /* Check that the B was ignored */ |
| ut_assertok(i2c_set_chip_flags(dev, DM_I2C_CHIP_RD_ADDRESS)); |
| ut_assertok(dm_i2c_read(dev, 0, buf, 5)); |
| ut_asserteq_mem(buf, "\0\0A\0\0\0", sizeof(buf)); |
| |
| /* Now write it again with the new flags, it should work */ |
| ut_assertok(i2c_set_chip_flags(dev, DM_I2C_CHIP_WR_ADDRESS)); |
| ut_assertok(dm_i2c_write(dev, 2, (uint8_t *)"AB", 2)); |
| ut_assertok(dm_i2c_read(dev, 0, buf, 5)); |
| ut_asserteq_mem(buf, "\0\xff\xff\xff\xff", sizeof(buf)); |
| |
| ut_assertok(i2c_set_chip_flags(dev, DM_I2C_CHIP_WR_ADDRESS | |
| DM_I2C_CHIP_RD_ADDRESS)); |
| ut_assertok(dm_i2c_read(dev, 0, buf, 5)); |
| ut_asserteq_mem(buf, "\0\0AB\0\0", sizeof(buf)); |
| |
| /* Restore defaults */ |
| sandbox_i2c_eeprom_set_test_mode(eeprom, SIE_TEST_MODE_NONE); |
| ut_assertok(i2c_set_chip_flags(dev, 0)); |
| |
| return 0; |
| } |
| DM_TEST(dm_test_i2c_bytewise, UT_TESTF_SCAN_PDATA | UT_TESTF_SCAN_FDT); |
| |
| static int dm_test_i2c_offset(struct unit_test_state *uts) |
| { |
| struct udevice *eeprom; |
| struct udevice *dev; |
| uint8_t buf[5]; |
| |
| ut_assertok(i2c_get_chip_for_busnum(busnum, chip, 1, &dev)); |
| |
| /* Do a transfer so we can find the emulator */ |
| ut_assertok(dm_i2c_read(dev, 0, buf, 5)); |
| ut_assertok(uclass_first_device_err(UCLASS_I2C_EMUL, &eeprom)); |
| |
| /* Offset length 0 */ |
| sandbox_i2c_eeprom_set_offset_len(eeprom, 0); |
| ut_assertok(i2c_set_chip_offset_len(dev, 0)); |
| ut_assertok(dm_i2c_write(dev, 10 /* ignored */, (uint8_t *)"AB", 2)); |
| ut_assertok(dm_i2c_read(dev, 0, buf, 5)); |
| ut_asserteq_mem("AB\0\0\0\0", buf, sizeof(buf)); |
| ut_asserteq(0, sanbox_i2c_eeprom_get_prev_offset(eeprom)); |
| |
| /* Offset length 1 */ |
| sandbox_i2c_eeprom_set_offset_len(eeprom, 1); |
| ut_assertok(i2c_set_chip_offset_len(dev, 1)); |
| ut_assertok(dm_i2c_write(dev, 2, (uint8_t *)"AB", 2)); |
| ut_asserteq(2, sanbox_i2c_eeprom_get_prev_offset(eeprom)); |
| ut_assertok(dm_i2c_read(dev, 0, buf, 5)); |
| ut_asserteq_mem("ABAB\0", buf, sizeof(buf)); |
| ut_asserteq(0, sanbox_i2c_eeprom_get_prev_offset(eeprom)); |
| |
| /* Offset length 2 boundary - check model wrapping */ |
| sandbox_i2c_eeprom_set_offset_len(eeprom, 2); |
| ut_assertok(i2c_set_chip_offset_len(dev, 2)); |
| ut_assertok(dm_i2c_write(dev, 0xFF, (uint8_t *)"A", 1)); |
| ut_asserteq(0xFF, sanbox_i2c_eeprom_get_prev_offset(eeprom)); |
| ut_assertok(dm_i2c_write(dev, 0x100, (uint8_t *)"B", 1)); |
| ut_asserteq(0x100, sanbox_i2c_eeprom_get_prev_offset(eeprom)); |
| ut_assertok(dm_i2c_write(dev, 0x101, (uint8_t *)"C", 1)); |
| ut_asserteq(0x101, sanbox_i2c_eeprom_get_prev_offset(eeprom)); |
| ut_assertok(dm_i2c_read(dev, 0xFF, buf, 5)); |
| ut_asserteq_mem("ABCAB", buf, sizeof(buf)); |
| ut_asserteq(0xFF, sanbox_i2c_eeprom_get_prev_offset(eeprom)); |
| |
| /* Offset length 2 */ |
| sandbox_i2c_eeprom_set_offset_len(eeprom, 2); |
| ut_assertok(i2c_set_chip_offset_len(dev, 2)); |
| ut_assertok(dm_i2c_write(dev, 0x2020, (uint8_t *)"AB", 2)); |
| ut_assertok(dm_i2c_read(dev, 0x2020, buf, 5)); |
| ut_asserteq_mem("AB\0\0\0", buf, sizeof(buf)); |
| ut_asserteq(0x2020, sanbox_i2c_eeprom_get_prev_offset(eeprom)); |
| |
| /* Offset length 3 */ |
| sandbox_i2c_eeprom_set_offset_len(eeprom, 3); |
| ut_assertok(i2c_set_chip_offset_len(dev, 3)); |
| ut_assertok(dm_i2c_write(dev, 0x303030, (uint8_t *)"AB", 2)); |
| ut_assertok(dm_i2c_read(dev, 0x303030, buf, 5)); |
| ut_asserteq_mem("AB\0\0\0", buf, sizeof(buf)); |
| ut_asserteq(0x303030, sanbox_i2c_eeprom_get_prev_offset(eeprom)); |
| |
| /* Offset length 4 */ |
| sandbox_i2c_eeprom_set_offset_len(eeprom, 4); |
| ut_assertok(i2c_set_chip_offset_len(dev, 4)); |
| ut_assertok(dm_i2c_write(dev, 0x40404040, (uint8_t *)"AB", 2)); |
| ut_assertok(dm_i2c_read(dev, 0x40404040, buf, 5)); |
| ut_asserteq_mem("AB\0\0\0", buf, sizeof(buf)); |
| ut_asserteq(0x40404040, sanbox_i2c_eeprom_get_prev_offset(eeprom)); |
| |
| /* Restore defaults */ |
| sandbox_i2c_eeprom_set_offset_len(eeprom, 1); |
| |
| return 0; |
| } |
| DM_TEST(dm_test_i2c_offset, UT_TESTF_SCAN_PDATA | UT_TESTF_SCAN_FDT); |
| |
| static int dm_test_i2c_addr_offset(struct unit_test_state *uts) |
| { |
| struct udevice *eeprom; |
| struct udevice *dev; |
| u8 buf[5]; |
| |
| ut_assertok(i2c_get_chip_for_busnum(busnum, chip, 1, &dev)); |
| |
| /* Do a transfer so we can find the emulator */ |
| ut_assertok(dm_i2c_read(dev, 0, buf, 5)); |
| ut_assertok(uclass_first_device_err(UCLASS_I2C_EMUL, &eeprom)); |
| |
| /* Offset length 0 */ |
| sandbox_i2c_eeprom_set_offset_len(eeprom, 0); |
| sandbox_i2c_eeprom_set_chip_addr_offset_mask(eeprom, 0x3); |
| ut_assertok(i2c_set_chip_offset_len(dev, 0)); |
| ut_assertok(i2c_set_chip_addr_offset_mask(dev, 0x3)); |
| ut_assertok(dm_i2c_write(dev, 0x3, (uint8_t *)"AB", 2)); |
| ut_assertok(dm_i2c_read(dev, 0x3, buf, 5)); |
| ut_asserteq_mem("AB\0\0\0\0", buf, sizeof(buf)); |
| ut_asserteq(0x3, sanbox_i2c_eeprom_get_prev_offset(eeprom)); |
| ut_asserteq(chip | 0x3, sanbox_i2c_eeprom_get_prev_addr(eeprom)); |
| |
| /* Offset length 1 */ |
| sandbox_i2c_eeprom_set_offset_len(eeprom, 1); |
| sandbox_i2c_eeprom_set_chip_addr_offset_mask(eeprom, 0x3); |
| ut_assertok(i2c_set_chip_offset_len(dev, 1)); |
| ut_assertok(i2c_set_chip_addr_offset_mask(dev, 0x3)); |
| ut_assertok(dm_i2c_write(dev, 0x310, (uint8_t *)"AB", 2)); |
| ut_assertok(dm_i2c_read(dev, 0x310, buf, 5)); |
| ut_asserteq_mem("AB\0\0\0\0", buf, sizeof(buf)); |
| ut_asserteq(0x310, sanbox_i2c_eeprom_get_prev_offset(eeprom)); |
| ut_asserteq(chip | 0x3, sanbox_i2c_eeprom_get_prev_addr(eeprom)); |
| |
| /* Offset length 2 */ |
| sandbox_i2c_eeprom_set_offset_len(eeprom, 2); |
| sandbox_i2c_eeprom_set_chip_addr_offset_mask(eeprom, 0x3); |
| ut_assertok(i2c_set_chip_offset_len(dev, 2)); |
| ut_assertok(i2c_set_chip_addr_offset_mask(dev, 0x3)); |
| ut_assertok(dm_i2c_write(dev, 0x32020, (uint8_t *)"AB", 2)); |
| ut_assertok(dm_i2c_read(dev, 0x32020, buf, 5)); |
| ut_asserteq_mem("AB\0\0\0\0", buf, sizeof(buf)); |
| ut_asserteq(0x32020, sanbox_i2c_eeprom_get_prev_offset(eeprom)); |
| ut_asserteq(chip | 0x3, sanbox_i2c_eeprom_get_prev_addr(eeprom)); |
| |
| /* Offset length 3 */ |
| sandbox_i2c_eeprom_set_offset_len(eeprom, 3); |
| sandbox_i2c_eeprom_set_chip_addr_offset_mask(eeprom, 0x3); |
| ut_assertok(i2c_set_chip_offset_len(dev, 3)); |
| ut_assertok(i2c_set_chip_addr_offset_mask(dev, 0x3)); |
| ut_assertok(dm_i2c_write(dev, 0x3303030, (uint8_t *)"AB", 2)); |
| ut_assertok(dm_i2c_read(dev, 0x3303030, buf, 5)); |
| ut_asserteq_mem("AB\0\0\0\0", buf, sizeof(buf)); |
| ut_asserteq(0x3303030, sanbox_i2c_eeprom_get_prev_offset(eeprom)); |
| ut_asserteq(chip | 0x3, sanbox_i2c_eeprom_get_prev_addr(eeprom)); |
| |
| /* Restore defaults */ |
| sandbox_i2c_eeprom_set_offset_len(eeprom, 1); |
| sandbox_i2c_eeprom_set_chip_addr_offset_mask(eeprom, 0); |
| |
| return 0; |
| } |
| |
| DM_TEST(dm_test_i2c_addr_offset, UT_TESTF_SCAN_PDATA | UT_TESTF_SCAN_FDT); |
| |
| static int dm_test_i2c_reg_clrset(struct unit_test_state *uts) |
| { |
| struct udevice *eeprom; |
| struct udevice *dev; |
| u8 buf[5]; |
| |
| ut_assertok(i2c_get_chip_for_busnum(busnum, chip, 1, &dev)); |
| |
| /* Do a transfer so we can find the emulator */ |
| ut_assertok(dm_i2c_read(dev, 0, buf, 5)); |
| ut_assertok(uclass_first_device_err(UCLASS_I2C_EMUL, &eeprom)); |
| |
| /* Dummy data for the test */ |
| ut_assertok(dm_i2c_write(dev, 0, "\xff\x00\xff\x00\x10", 5)); |
| |
| /* Do some clrset tests */ |
| ut_assertok(dm_i2c_reg_clrset(dev, 0, 0xff, 0x10)); |
| ut_assertok(dm_i2c_reg_clrset(dev, 1, 0x00, 0x11)); |
| ut_assertok(dm_i2c_reg_clrset(dev, 2, 0xed, 0x00)); |
| ut_assertok(dm_i2c_reg_clrset(dev, 3, 0xff, 0x13)); |
| ut_assertok(dm_i2c_reg_clrset(dev, 4, 0x00, 0x14)); |
| |
| ut_assertok(dm_i2c_read(dev, 0, buf, 5)); |
| ut_asserteq_mem("\x10\x11\x12\x13\x14", buf, sizeof(buf)); |
| |
| return 0; |
| } |
| DM_TEST(dm_test_i2c_reg_clrset, UT_TESTF_SCAN_PDATA | UT_TESTF_SCAN_FDT); |