tricorder: enable hw assisted BCH8 in SPL and u-boot
Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com>
Cc: Tom Rini <trini@ti.com>
Cc: Thomas Weber <weber@corscience.de>
Cc: Ilya Yanok <ilya.yanok@cogentembedded.com>
Cc: Scott Wood <scottwood@freescale.com>
diff --git a/include/configs/tricorder.h b/include/configs/tricorder.h
index ebd7a25..4c75cc5 100644
--- a/include/configs/tricorder.h
+++ b/include/configs/tricorder.h
@@ -125,6 +125,8 @@
#define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of NAND */
/* devices */
+#define CONFIG_NAND_OMAP_BCH8
+#define CONFIG_BCH
/* commands to include */
#include <config_cmd_default.h>
@@ -290,7 +292,7 @@
#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x300 /* address 0x60000 */
#define CONFIG_SPL_TEXT_BASE 0x40200000 /*CONFIG_SYS_SRAM_START*/
-#define CONFIG_SPL_MAX_SIZE (54 * 1024) /* 8 KB for stack */
+#define CONFIG_SPL_MAX_SIZE (55 * 1024) /* 7 KB for stack */
#define CONFIG_SPL_STACK LOW_LEVEL_SRAM_STACK
#define CONFIG_SPL_BSS_START_ADDR 0x80000000 /*CONFIG_SYS_SDRAM_BASE*/
@@ -303,11 +305,14 @@
#define CONFIG_SYS_NAND_OOBSIZE 64
#define CONFIG_SYS_NAND_BLOCK_SIZE (128*1024)
#define CONFIG_SYS_NAND_BAD_BLOCK_POS NAND_LARGE_BADBLOCK_POS
-#define CONFIG_SYS_NAND_ECCPOS {2, 3, 4, 5, 6, 7, 8, 9,\
- 10, 11, 12, 13}
+#define CONFIG_SYS_NAND_ECCPOS {12, 13, 14, 15, 16, 17, 18, 19, 20,\
+ 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31, 32, 33,\
+ 34, 35, 36, 37, 38, 39, 40, 41, 42, 43, 44, 45, 46,\
+ 47, 48, 49, 50, 51, 52, 53, 54, 55, 56, 57, 58, 59,\
+ 60, 61, 62, 63}
#define CONFIG_SYS_NAND_ECCSIZE 512
-#define CONFIG_SYS_NAND_ECCBYTES 3
+#define CONFIG_SYS_NAND_ECCBYTES 13
#define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_TEXT_BASE