stm32mp1: ram: add interactive mode for DDR configuration
This debug mode is used by CubeMX DDR tuning tools
or manualy for tests during board bring-up.
It is simple console used to change DDR parameters and check
initialization.
Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
diff --git a/drivers/ram/stm32mp1/Kconfig b/drivers/ram/stm32mp1/Kconfig
index b9c8166..511eaf2 100644
--- a/drivers/ram/stm32mp1/Kconfig
+++ b/drivers/ram/stm32mp1/Kconfig
@@ -10,3 +10,22 @@
family: support for LPDDR2, LPDDR3 and DDR3
the SDRAM parameters for controleur and phy need to be provided
in device tree (computed by DDR tuning tools)
+
+config STM32MP1_DDR_INTERACTIVE
+ bool "STM32MP1 DDR driver : interactive support"
+ depends on STM32MP1_DDR
+ help
+ activate interactive support in STM32MP1 DDR controller driver
+ used for DDR tuning tools
+ to enter in intercative mode type 'd' during SPL DDR driver
+ initialisation
+
+config STM32MP1_DDR_INTERACTIVE_FORCE
+ bool "STM32MP1 DDR driver : force interactive mode"
+ depends on STM32MP1_DDR_INTERACTIVE
+ default n
+ help
+ force interactive mode in STM32MP1 DDR controller driver
+ skip the polling of character 'd' in console
+ useful when SPL is loaded in sysram
+ directly by programmer