watchdog: rti: drop hack manipulating WDT clock rate
The hack itself seems to be copied from Linux rti_wdt.c, but the WDT reset
principle is different in U-Boot. While Linux relies on correct frequencies
and timers and doesn't check the actual WDT counter value U-Boot driver
seems to be more robust: it does compare RTIDWDCNTR vs RTIDWDPRLD.
Now the root cause of the original motivation to manipulate the clock rate
is said to be understood and fixed in Linux commit cae58516534e
("watchdog: rti_wdt: Set min_hw_heartbeat_ms to accommodate a safety margin")
which simultaneously removed the hack itself.
While is fix part of the mentioned patch is neither applicable nor requried
for the U-Boot driver just drop the hack setting WDT clock rate to 90% of
the real rate. This has a nice effect that the WDT timeout is now as
requested and not 10% shorter.
Signed-off-by: Alexander Sverdlin <alexander.sverdlin@siemens.com>
Reviewed-by: Jan Kiszka <jan.kiszka@siemens.com>
Reviewed-by: Stefan Roese <sr@denx.de>
diff --git a/drivers/watchdog/rti_wdt.c b/drivers/watchdog/rti_wdt.c
index 320c5ca..7b38726 100644
--- a/drivers/watchdog/rti_wdt.c
+++ b/drivers/watchdog/rti_wdt.c
@@ -187,14 +187,6 @@
priv->clk_hz = clk_get_rate(&clk);
- /*
- * If watchdog is running at 32k clock, it is not accurate.
- * Adjust frequency down in this case so that it does not expire
- * earlier than expected.
- */
- if (priv->clk_hz < 32768)
- priv->clk_hz = priv->clk_hz * 9 / 10;
-
return 0;
}