ARM: UniPhier: add UniPhier SoC support code
These are used by Panasonic UniPhier SoC family.
Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
diff --git a/arch/arm/include/asm/arch-uniphier/sc-regs.h b/arch/arm/include/asm/arch-uniphier/sc-regs.h
new file mode 100644
index 0000000..1197bb5
--- /dev/null
+++ b/arch/arm/include/asm/arch-uniphier/sc-regs.h
@@ -0,0 +1,62 @@
+/*
+ * UniPhier SC (System Control) block registers
+ *
+ * Copyright (C) 2011-2014 Panasonic Corporation
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef ARCH_SC_REGS_H
+#define ARCH_SC_REGS_H
+
+#define SC_BASE_ADDR 0x61840000
+
+#define SC_MPLLOSCCTL (SC_BASE_ADDR | 0x1184)
+#define SC_MPLLOSCCTL_MPLLEN (0x1 << 0)
+#define SC_MPLLOSCCTL_MPLLST (0x1 << 1)
+
+#define SC_DPLLCTRL (SC_BASE_ADDR | 0x1200)
+#define SC_DPLLCTRL_SSC_EN (0x1 << 31)
+#define SC_DPLLCTRL_FOUTMODE_MASK (0xf << 16)
+#define SC_DPLLCTRL_SSC_RATE (0x1 << 15)
+
+#define SC_DPLLCTRL2 (SC_BASE_ADDR | 0x1204)
+#define SC_DPLLCTRL2_NRSTDS (0x1 << 28)
+
+#define SC_DPLLCTRL3 (SC_BASE_ADDR | 0x1208)
+#define SC_DPLLCTRL3_LPFSEL_COEF2 (0x0 << 31)
+#define SC_DPLLCTRL3_LPFSEL_COEF3 (0x1 << 31)
+
+#define SC_UPLLCTRL (SC_BASE_ADDR | 0x1210)
+
+#define SC_VPLL27ACTRL (SC_BASE_ADDR | 0x1270)
+#define SC_VPLL27ACTRL2 (SC_BASE_ADDR | 0x1274)
+#define SC_VPLL27ACTRL3 (SC_BASE_ADDR | 0x1278)
+
+#define SC_VPLL27BCTRL (SC_BASE_ADDR | 0x1290)
+#define SC_VPLL27BCTRL2 (SC_BASE_ADDR | 0x1294)
+#define SC_VPLL27BCTRL3 (SC_BASE_ADDR | 0x1298)
+
+#define SC_RSTCTRL (SC_BASE_ADDR | 0x2000)
+#define SC_RSTCTRL_NRST_ETHER (0x1 << 12)
+#define SC_RSTCTRL_NRST_UMC1 (0x1 << 5)
+#define SC_RSTCTRL_NRST_UMC0 (0x1 << 4)
+#define SC_RSTCTRL_NRST_NAND (0x1 << 2)
+
+#define SC_RSTCTRL2 (SC_BASE_ADDR | 0x2004)
+#define SC_RSTCTRL3 (SC_BASE_ADDR | 0x2008)
+
+#define SC_CLKCTRL (SC_BASE_ADDR | 0x2104)
+#define SC_CLKCTRL_CLK_ETHER (0x1 << 12)
+#define SC_CLKCTRL_CLK_MIO (0x1 << 11)
+#define SC_CLKCTRL_CLK_UMC (0x1 << 4)
+#define SC_CLKCTRL_CLK_NAND (0x1 << 2)
+#define SC_CLKCTRL_CLK_SBC (0x1 << 1)
+#define SC_CLKCTRL_CLK_PERI (0x1 << 0)
+
+/* System reset control register */
+#define SC_IRQTIMSET (SC_BASE_ADDR | 0x3000)
+#define SC_SLFRSTSEL (SC_BASE_ADDR | 0x3010)
+#define SC_SLFRSTCTL (SC_BASE_ADDR | 0x3014)
+
+#endif /* ARCH_SC_REGS_H */